Pasar al contenido principal

IMAGEN DE ALTA RESOLUCION DE LA ESTRUCTURA CORTICAL DE LOS PIRINEOS CENTRALES Y EL PAPEL DE LA HERENCIA VARISCA EN SU EVOLUCION GEODINAMICA

PID2020-114273GB-C22

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 46
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Basement and cover architecture in the Central Pyrenees constrained by gravity data

  • Clariana, Pilar
  • Soto, Ruth
  • Ayala, C.
  • Casas-Sainz, Antonio M.
  • Román-Berdiel, T.
  • Oliva-Urcia, Belén
  • Pueyo Morer, Emilio Luis
  • Beamud, Elisabet
  • Rey Moral, María del Carmen
  • Rubio Sánchez-Aguililla, Félix Manuel
  • Margalef, A.
  • Schamuells, Stefania
  • Bach-Oller, Nuria
  • Martí Molist, Joan
A new gravity survey (1164 gravity stations and 180 samples for density analysis) combined with two new geological cross sections has been carried out in a sector of the Central Pyrenees in order to improve the characterization of basement and cover architecture. From North to South, the study area comprises the southern half of the Axial Zone and the northernmost part of the South-Pyrenean Zone. New gravity data were combined with previous existing databases to obtain the Bouguer and residual anomaly maps of the study area. The two cross sections, oriented NNE–SSW, were built from field data and previous surficial and subsurface data and cross the La Maladeta plutonic complex. The residual anomaly map shows values ranging from −18 to 16 mGal and anomalies mainly oriented N120E. The two 2.5D modelled cross sections show similar observed gravity curves coinciding with similar interpreted structural architecture. Data show a gravity high oriented N120E coinciding with the Orri basement thrust sheet and an important gravity depression, with the same orientation, coinciding with the leading edge at depth of the Rialp basement thrust sheet and interpreted as linked to a large subsurface accumulation of Triassic evaporites. The volume at depth of the La Maladeta and Arties granites has been constrained through gravity modelling. This work highlights that the combination of structural geology and gravity modelling can help to determine the structural architecture of an orogen and localize accumulations of evaporites at depth., This work is part of the project CGL2017-84901-C2-2-P funded by MCIN/AEI/10.13039/501100011033 and “ERDF A way of making Europe” and project PID2020-114273GB-C22 funded by MCIN/AEI/10.13039/501100011033 from Spanish Ministry of Science, Innovation and Universities. Seequent has provided us the GM-SYS module of the Oasis Montaj. The authors acknowledge the contribution of José María Llorente and Agustin González for the acquisition of the gravity data. We thank to Aigüestortes National park and Alt Pirineu Natural park their logistic support. We thank anonymous reviewer for improving the content in the manuscript. This study represents a contribution to GeoAp Research Group (E01-20R) (Aragón Government)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Gravity data on the Central Pyrenees: a step forward to help a better understanding of the Pyrenean structures

  • Ayala, C.
  • Rey Moral, María del Carmen
  • Rubio Sánchez-Aguililla, Félix Manuel
  • Soto, Ruth
  • Clariana, Pilar
  • Martín-León, Juliana
  • Bellmunt, Fabian
  • Gabàs, Anna
  • Macau, Albert
  • Casas-Sainz, Antonio M.
  • Martí Molist, Joan
  • Pueyo Morer, Emilio Luis
  • Benjumea, Beatriz
The data is available under request and free of charge. Gravity data from the GeoPiri3D project (2.5D and 3D characterization of the crustal structure of the Catalan Pyrenees with special attention to granitic bodies and Permocarboniferous volcano-sedimentary basins http://hdl.handle.net/10261/254934, In this work, we present new Bouguer and residual Bouguer anomaly maps of the Central Pyrenees calculated from 3590 stations, of which 1141 are new observations acquired from surveys performed between 2018 and 2019. The most prominent feature of the Bouguer anomaly is the long wavelength elongated minimum in its central part that continues to the W and ends towards the E with a positive gradient that seems to envelope the minimum. Other short and medium wavelength minima are superimposed, some placed over the batholithic outcrops. In the residual Bouguer, the main relative minima are related with outcrops of batholiths or interpreted buried granites except for the prominent minimum South of La Maladeta Granite, associated with Triassic evaporitic accumulations. These maps (shown on the Main Map) will help characterizing the Permo-Carboniferous batholiths of the Central Pyrenees, in particular La Maladeta and Andorra Mont-Louis granites in order to add constraints to the mechanism of their emplacement., The authors thank the financial support from the CGL2017-84901-C2-2-P funded by MCIN/AEI/10.13039/501100011033 and ‘ERDF A way of making Europe’ and project PID2020-114273GB-C22 funded by MCIN/AEI/10.13039/501100011033. T, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Bases metodológicas para la obtención de cartografía gravimétrica. Petrofísica y modelización gravimétrica 2D y 3D

  • Rubio Sánchez-Aguililla, Félix Manuel
  • Rey Moral, María del Carmen
  • Ayala, C.
  • Pueyo Morer, Emilio Luis
El empleo de métodos de campo potencial en la exploración geofísica, en especial la gravimetría, es una herramienta clásica para el estudio del subsuelo y viene siendo utilizada ampliamente desde principios del S. XX (para una visión histórica más amplia ver LaFerh, 1980). El primer gravímetro moderno fue desarrollado por LaCoste & Romberg en 1936 quienes inventaron la mayoría de los refinamientos posteriores. Desde entonces el desarrollo de los gravímetros, cada vez más portables y precisos, ha permitido la aplicación de este método en un amplio rango de objetivos que incluyen la investigación en recursos naturales (hidrocarburos, minería, geotermia, hidrogeología, etc.), estudios superficiales de detalle (detección de cavidades, arqueología, caracterización de reservorios), investigación básica (caracterización tanto de las estructuras del basamento y la corteza superior como de toda la litosfera), apoyo a la cartografía geológica proporcionando información de geología no aflorante que ayude al entendimiento de la geología regional (p. ej. apoyo a los cortes geológicos), etc., La obtención de los ejemplos aportados en este documento ha sido posible gracias a los siguientes proyectos de financiación pública (nacional y europea): - Establecimiento de bases metodológicas para la obtención de Cartografía Gravimétrica 1:50000. Aplicación a la modelización 2D y 3D en varias zonas de la Península Ibérica (IGME 2005). Fondo documental del IGME, informes nº: 64058, 64059, 64060, 64061, 64062, 64063 y 64064. http://info.igme.es/ConsultaSID/Index.asp. - High-resolution imaging of the crustal-scale structure of the Central Pyrenees and role of Variscan inheritance on its geodynamic evolution (IMAGYN) (Proyecto de I+D+I PID2020- 114273GB-C22 financiado por MCIN/AEI/10.13039/501100011033). - Caracterización 2.5 y 3D de la estructura cortical del Pirineo Catalán con especial atención a los cuerpos graníticos y cuencas volcano-sedimentarias permocarboníferas (GeoPiri3D) (Proyecto de I+D+i CGL2017-84901-C2-2-P financiado por MCIN/AEI/10.13039/501100011033 y "FEDER, una manera de hacer Europa"). - Unravelling the kinetics of burial remagnetizations; an integrated 4D approach (UKRIA4D) (Proyecto de I+D+I PID2019-104693GB-I00 financiado por MCIN/AEI/10.13039/501100011033 y "FEDER, una manera de hacer Europa"). - 3D geomodeling for Europe-Optimizing reconstructions of the subsurface to reduce structural uncertainty in 3D models (GeoERA-3DGEO-EU). Proyecto financiado por ERANET CA 731166 (H2020) de la Unión Europea (Project code GeoE.171.005). - Research network for including Geothermal technologies into Decarbonized Heating and Cooling grids Geothermal DHC (CA18219/ OC-2018-2-23361). - Detachment folds and diapirs; recognition, reconstruction, restoration advanced methodologies (DR3AM) (CGL2014-54118-C2-2-R). - Consistent 3D restoration in complex structures by using structural and paleomagnetic 3D references Pmag3DRest (CGL2009-14214-BTE). - Geociencias en Iberia: Estudios integrados de topografía y evolución 4D. Topo-Iberia. (CGL2010–15416). SiTopo Base de datos de Topo-Iberia (acceso controlado)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Axial longitudinal flow in volcanic materials of the Late Carboniferous-Permian Cadí basin (Southern Pyrenees) determined from anisotropy of magnetic susceptibility

  • Simón-Muzás, Ana
  • Casas-Sainz, Antonio M.
  • Soto, Ruth
  • Gisbert, Josep
  • Román-Berdiel, T.
  • Oliva-Urcia, Belén
  • Pueyo Morer, Emilio Luis
  • Beamud, Elisabet
The aim of this work is the application of the anisotropy of magnetic susceptibility (AMS) to the study of volcanic materials from the Late Carboniferous-Permian Cadí basin (southern Pyrenees) in order to (i) explore the limits of this technique in ancient volcanic materials that have undergone strong chemical alteration and a complex tectonic evolution and (ii) provide new insights on the deposition of volcanic materials in this tectonically controlled sedimentary basin. To establish a comparison with the petrofabric of rocks, AMS was complemented with observations and orientation analyses at the outcrop scale, in oriented polished blocks and in thin sections under the microscope. High resolution sampling (620 specimens from 56 sites located in five transects along a sequence 150 m thick) allowed to characterize the volcaniclastic and lava flow series. The AMS results show a fairly constant average magnetic lineation oriented WNW-ESE (in situ and tilt-corrected) and two secondary maxima (N-S to NE-SW in some areas). The magnetic mineralogy analyses indicate the contribution of paramagnetic and ferromagnetic (magnetite, Tc 580 °C) phases to susceptibility. The magnetic fabric has a close relationship with the spatial distribution and orientation of the mineral and grain components of the studied rocks, mainly controlled by depositional processes, with a negligible contribution of the tectonic imprint. Therefore, the magnetic lineation (i.e. K1 axes) can be reliably used as a paleoflow indicator. Nevertheless, it was not possible to establish a clear correspondence between lithological and magnetic fabric types. The results obtained indicate that the AMS approach represents a powerful tool to infer the paleoflow pattern in ancient volcanic and volcaniclastic rocks, even under a priori unfavourable conditions., This work was supported by projects grants CGL2017-84901-C2-2-P, PID2020-114273GB-C22, PID2019-108753GB-C22 and FPU19/02353 funded by MCIN/AEI/10.13039/501100011033, “ERDF A way of making Europe” and “ESF Investing in your future”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Petrophysical characterization of non-magnetic granites; density and magnetic susceptibility relationships

  • Pueyo Morer, Emilio Luis
  • Román-Berdiel, T.
  • Calvín, P.
  • Luc Bouchez, Jean
  • Beamud, Elisabet
  • Ayala, C.
  • Loi, Francesca
  • Soto, Ruth
  • Clariana, Pilar
  • Margalef, A.
  • Bach, N.
  • Schamuells, Nia
  • Rubio Sánchez-Aguililla, Félix Manuel
  • Gimeno, Ana
  • Fernández de Arévalo, Elena
  • Rey Moral, María del Carmen
  • García, Arturo
  • Martí Molist, Joan
  • Casas-Sainz, Antonio M.
  • García Lobón, José Luis
In this work we establish reliable correlations between density and magnetic susceptibility in three paramagnetic granites from the Pyrenees. In total, 128 sites (310 density measurements and >2600 susceptibility ones) were studied in the Mont Louis-Andorra, Maladeta and Marimanha granitic plutons covering the main range of variability of magnetic susceptibility. Regressions were calculated for every granitic body and an integrated linear function was obtained for the entire dataset: ρ (kg/m3) = 2566 (kg/m3) + 0.541κ (10−6 S.I.) (R:0.97). This relationship is only valid in the paramagnetic domain, where iron is mostly fractioned in iron-bearing phyllosilicates and the occurrence of magnetite is negligible (or at least its contribution to the bulk susceptibility). This relationship, likely different in other bodies, allows for transforming magnetic susceptibility data into density data, helping to constrain gravity modelling when density data from rock samples are scarce. Given the large amount of AMS studies worldwide, together with the quickness and cost-effectiveness of susceptibility measurements with portable devices, this methodology allows for densifying and homogenizing the petrophysical data when modelling granite rock volumes based on both magnetic and gravimetric signals., This work was financed by the projects GeoPiri3D (CGL2017-84901-C2-2-P), UKRIA4D (PID2019-104693GB-I00/CTA) and IMAGYN (PID2020-114273GB-C22) from the Spanish Ministry of Science (funded by MCIN/AEI/10.13039/501100011033 and “ERDF A way of making Europe”). This work is methodologically related also with the 3DGeoEU project financed by the European Commission under the ERANET Cofound action GeoERA (Grant No.: 731166). The GeoAp Research group from the Aragonian Government is also acknowledged. We are also in debt to the staff of the Petrophysical Laboratory (IGME, Tres Cantos) and to the Geophysics technicians (José Mª Llorente and Agustín González). The help of the Rock Magnetism Laboratory of the Centre Européen de Recherche et d’Enseignement de Géosciences de l’Environnement (CEREGE) in Aix en ProvenceMarseille is also acknowledged. P.C. acknowledges funding from PTA2017-14779-I and FJC2019- 041058-I (AEI-Spain) contracts. E.B. thanks the Geomodels Research Institute of the University of Barcelona and GGAC-2017SGR596 (Generalitat de Catalunya)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Assessing the internal uppermost crustal structure of the central pyrenees by gravity-constrained cross sections

  • Soto, Ruth
  • Clariana, Pilar
  • Ayala, C.
  • Rey-Moral, Carmen
  • Casas-Sainz, Antonio M.
  • Román-Berdiel, T.
  • Margalef, A.
  • Rubio Sánchez-Aguililla, Félix Manuel
  • Pueyo Morer, Emilio Luis
  • Martín-León, Juliana
  • Beamud, Elisabet
The Pyrenees constitutes an exceptional example of an Alpine orogenic belt characterized by basement thrust sheets involving Paleozoic rocks and Mesozoic and Cenozoic cover units detached on the Triassic evaporites, the main décollement level. This work is located in the Central Pyrenees, where gravity data help to better constrain the internal architecture of the upper crust of the southern half of the Axial Zone and the northern part of the South Pyrenean Zone, a key area to understand the orogenic evolution of the chain. Previous and new gravity, petrophysical and geological data have been used to obtain the Bouguer and residual anomaly maps of the study area and six serial gravity-constrained cross sections perpendicular to the main structural trend. The residual anomaly map shows a good correlation between basement units involved in thrust sheets of the study area and gravity highs whereas negative anomalies are interpreted to correspond with Mesozoic/Cenozoic basins, Triassic evaporites, Late Variscan igneous bodies, and Ordovician gneisses. The six gravity-constrained cross sections highlight strong along-strike variations on the gravity signal due to lateral differences of the superficial and subsurface occurrence of Triassic evaporites, different geometry at depth of the Late Variscan igneous bodies outcropping in the study area, and geometric lateral variations of the basement thrust sheets and their relationship with the Mesozoic-Cenozoic units., This work was funded by projects CGL2017-84901-C2-2-P funded by MCIN/AEI/10.13039/501100011033 and “ERDF A way of making Europe”, PID2020-114273GB-C22 funded by MCIN/AEI/10.13039/501100011033 from the Spanish Ministry of Science and Innovation, and "Severo Ochoa” extraordinary grants for excellence IGME-CSIC (AECEX2021)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Caracterización de la cuenca neógena de la Cerdanya mediante la combinación de métodos geofísicos: sísmica pasiva, magnetotelúrica y gravimetría., Characterization of the Cerdanya Neogene Basin by combining geophysical methods: passive seismic, magnetotelluric and gravimetry.

  • Macau, Albert
  • Rey Moral, María del Carmen
  • Rubio Sánchez-Aguililla, Félix Manuel
  • Gabàs, Anna
  • Bellmunt, Fabian
  • Andrés, Juvenal
  • Soto, Ruth
  • Clariana, Pilar
  • González Durán, Agustín
  • García García, Arturo
  • Benjumea, Beatriz
  • Ayala, C.
Congreso realizado en Toledo del 28 de noviembre al 1 de diciembre de 2022., [EN] The Cerdanya Neogene basin, located in the eastern sector of the Central Pyrenees, has been studied to characterize its structure in depth. The thickness of the Neogene filling of the basin (detrital materials with some levels of lignite) has been inferred by combining different geophysical exploration methods in a NW-SE trending profile that crosses, perpendicularly, the basin in its central part: passive seismic (H/V spectral ratio method and array technique), electromagnetic methods (MT and AMT) and gravimetry. Applying the array technique, the shear wave velocity (Vs) of the basin materials has been calculated, both for the Neogene deposits and the bedrock. These data combined with the results obtained from the H/V spectral ratio method allow deriving the bedrock geometry. The electromagnetic method provides the 2D electrical resistivity model, characterizing the geoelectric properties of the basin and depicting the presence of the d'Alp-la Tet fault, an important structural element of the basin. The electrical model inversion uses as an initial model the bedrock depth obtained from the passive seismic. In the residual Bouguer anomaly modelling, a satisfactory gravimetric model is obtained when the thickness of the Neogene deposits varies between 0 and 650 meters and assigned density of 2.2 g/cm3 , supported by the low Vs obtained. The thickness of the Neogene filling presents variations that are related to the presence of normal fault with small vertical offset. The application of this methodology, based on the combination of different geophysical exploration methods, has reduced the different uncertainties inherent in each geophysical method, and aim to characterize the Cerdanya Neogene basin geometry., Este trabajo se ha financiado con el proyecto PID2020-114273GB-C22 financiado por MCIN/AEI/10.13039/501100011033 del Ministerio de Ciencia e Innovación de España., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Anomalías de Bouguer residual en la Zona Axial del Pirineo Central; características y origen, Residual Bouguer anomalies in the Axial Zone (Central Pyrenees); characteristics and origin

  • Soto, Ruth
  • Clariana, Pilar
  • Ayala, C.
  • Rey Moral, María del Carmen
  • Rubio Sánchez-Aguililla, Félix Manuel
  • Casas-Sainz, Antonio M.
  • Román-Berdiel, T.
  • Margalef, A.
  • Oliva-Urcia, Belén
  • Pueyo Morer, Emilio Luis
  • Martín León, Juliana
  • Beamud, Elisabet
Centro Nacional de Información Geográfica (España), [EN] This work integrates geological, geophysical and petrophysical data in order to study residual Bouguer anomalies localized in the Central Pyrenean Axial Zone (between the Noguera-Ribagorzana and Segre rivers to the West and East, respectively). The study area is characterized by thrust sheets of basement Paleozoic rocks forming an antiformal stack and southwards vergence due to the Alpine orogeny, high structural complexity related to the Variscan and Alpine deformation and scarce subsurface data. The Paleozoic rocks present a high variability both in lithology and age. The geological data are based on published geological cartographies and new acquired data, the gravimetric data consist of previous and new data acquired during the 2018 and 2019 (reaching a total of 3590 gravity stations) and the petrophysical data correspond to 526 density measurements. The Bouguer anomaly map of the study area shows a longwave relative minimum (~40 km) with several relative maxima and minima of short- and medium wave (between 2 and 20 km). The residual anomaly map, which allows to investigate the gravimetric anomalies that originated in the upper crust, shows a complex pattern of maxima and minima that does not follow the N110E Pyrenean main direction. Six NNESSO geological cross sections were gravimetrically modeled. The observed gravity response along the cross sections varies according to lithological and rheological changes in the upper crustal rocks, presence of evaporitic rocks both at surface and subsurface, presence of Upper Carboniferous granites, Ordovician gneisses and Neogene rocks belonging to the Cerdanya basin and rocks with different metamorphic grade. Our results also allow to delineate the lateral continuity of structures. This work highlights, in absence of other more resolute geophysical data, the high potential and applicability of gravity data acquired in structurally complex areas when combining with geological and petrophysical data in order to constrain geological models., Este trabajo se ha financiado con el proyecto PID2020-114273GB-C22 financiado por MCIN/AEI/10.13039/501100011033 del Ministerio de Ciencia e Innovación de España., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

La deformación varisca de los sinclinales de Tor-Casamanya y Llavorsí en la Zona Axial pirenaica (Pirineos Centrales), Variscan deformation of the Tor-Casamanya and Llavorsí Synclines in the Pyrenean Axial Zone (Central Pyrenees)

  • Clariana, Pilar
[ES] La cartografía geológica y el estudio estructural de los sinclinales de Tor-Casamanya y Llavorsí, parte central de la Zona Axial Pirenaica han permitido encontrar estructuras y foliaciones relacionadas con dos eventos de deformación producidos durante la orogenia Varisca, D1 caracterizado por pliegues de dirección E-O a SE-NO, vergentes al Norte y D2 caracterizado por el desarrollo de (i) pliegues derechos o vergentes al sur, (ii) cabalgamientos de orientación E-O y sentido de movimiento hacia el sur enraizados en la base del Silúrico o en niveles más profundos., [EN] The geological mapping and a structural analysis of the Tor-Casamanya and Llavorsí Synclines, in the central part of the Pyrenean Axial Zone allowed us to find structures and foliations related to two deformation events of the Variscan Orogeny, D1, characterized by E-W to SE-NW north-verging folds, and D2, characterized by (i) upright or south-verging folds, and (ii) thrusts with E-W trend southward sense of tectonic transport and rooted at the Silurian base or at deeper levels., Este trabajo fue financiado por el Instituto Geológico y Minero de España (IGME), por el Institut d’Estudis Andorrans (IEA) y por el proyecto “ERDF A way of making Europe”, PID2020-114273GB-C22 financiado por el MCIN/AEI/10.13039/501100011033, Ministerio de Ciencia e Innovación., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Dyke or pipe? Contributions of magnetic fabrics to the reconstruction of the geometry of an eroded subvolcanic body (Cadí basin, Pyrenees)

  • Simón-Muzás, Ana
  • Casas-Sainz, Antonio M.
  • Soto, Ruth
  • Beamud, Elisabet
  • Gisbert, Josep
The reconstruction of the geometry of igneous bodies in inverted basins is often a difficult task, because most of their volume can be either below or above the topographic surface. Indirect methods, such as the determination of their internal fabric can give clues to constrain geometrical reconstructions. The Sant Salvador intrusion, located in the Late Carboniferous-Permian Cadí basin (Central-Eastern Pyrenees), is a good example for testing the application of magnetic fabrics to shallow igneous bodies because of (i) its characteristics in terms of crystal composition/orientation, showing a homogeneous petrofabric controlled by plagioclase crystals 0.4 mm in size, (ii) its good, though partial, preservation, (iii) its position in the stratigraphical succession, between volcaniclastic sediments and unconformably overlying red beds, and (iv) the many unknown factors related to the intrusion, including the geometry of the body and its depth and the amount of erosion after intrusion. Furthermore, the Sant Salvador intrusion provides opportunity for checking the correspondence between the petrofabric and the magnetic fabrics when the magnetic carriers of susceptibility (with an average value of 5217·10 SI) are mainly ferromagnetic. In this case the main magnetic carriers are magnetite and also hematite, the latter resulting from oxidation processes at the paleosurface. The results of Anisotropy of Magnetic Susceptibility show a bimodality in the K disposition after bedding restitution: vertical in the deeper areas of the intrusion and subhorizontal, E-W, in the uppermost stratigraphic positions with an intermediate necking zone in which transition from vertical to horizontal flow is interpreted to occur. Bands deflecting the mineral foliation at the micro scale have also a tectonic or thermal origin but do not seem to interfere with the magnetic ellipsoid axes. Columnar jointing is interpreted to be parallel to the long axis of the intrusion (and therefore to magma flow, and perpendicular to the paleosurface. All these features indicate that the Sant Salvador intrusion can be interpreted as a subvertical pipe feeding a sill that was eroded before the sedimentation of the overlying red beds., This work was supported by projects grants PID2020-114273 GB-C22, PID2019-108753 GB-C22 and FPU19/02353 funded by MCIN/AEI/10.13039/501100011033, “ERDF Away of making Europe” and “ESF Investing in your future”. EB thanks the Geomodels Research Institute (UB) and GGAC 2021 SGR00076 (AGAUR)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Paleomagnetic study of Late-Carboniferous-Permian rocks from the Cadí Basin (Eastern Pyrenees): Tectonic implications

  • Simón-Muzás, Ana
  • Casas-Sainz, Antonio M.
  • Soto, Ruth
  • Pueyo Morer, Emilio Luis
  • Beamud, Elisabet
  • Oliva-Urcia, Belén
We have carried out a detailed paleomagnetic study of volcanic rocks (18 sites) and red beds (10 sites) from the Late-Carboniferous-Permian series of the Cadí Basin (Eastern Pyrenees). The study provides reliable Late Carboniferous-Permian paleomagnetic directions, in an area where paleomagnetic studies are scarce. The main characteristic component in both rock types shows a SSE direction with a shallow inclination and a dominant reverse polarity. The magnetic carriers, both in the volcanic rocks and the red beds, are magnetite and hematite. The main component is interpreted as a primary magnetization of Permian age in the red beds; in the Late Carboniferous volcanic rocks, the main component likely represents primary magnetization or early remagnetization. These results are consistent with the poles for the Iberian plate during the Permian and indicate an absence of regional vertical axis rotations for the Orri nappe, in whose hanging wall the Cadí Basin was transported southwards during the Pyrenean orogeny., This work was supported by projects grants PID2020-114273GB-C22, PID2019-108753GB-C22, and PID2019-104693GB-I00 funded by MCIN/AEI/10.13039/501100011033, “ERDF Away of making Europe” and grant FPU19/02353 funded by MCIN/AEI/10.13039/501100011033, “ERDF Away of making Europe” and funded by “ESF Investing in your future”. This study represents a contribution from the GeoAp (E01-20R) and the GeoTransfer (E32-20R) Research Groups (Aragón Government). EB thanks the Geomodels Research Institute and AGAUR 2021SGR00076., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High-resolution scan of the Pyrenean crustal structure combining magnetotelluric and gravity data

  • Piña-Varas, Perla
  • Soto, Ruth
  • Clariana, Pilar
  • Ayala, C.
  • Rubio Sánchez-Aguililla, Félix Manuel
  • Ledo, Juanjo
  • Rey-Moral, Carmen
  • Marti, A.
  • Mitjanas, G.
  • Queralt, P.
  • Marcuello, A.
  • Santolaria, Pablo
  • Pueyo Morer, Emilio Luis
The Pyrenees have undergone complex geodynamic evolution starting with experiencing significant tectonic events during the Variscan Orogeny, followed by the intrusion of large granitic complexes during the late Variscan stage, then the collision between the Iberian and European plates during the Alpine Orogeny, and finally, Mesozoic extension. Despite extensive studies and the application of various geophysical methods (two-dimensional seismic reflection data, gravity, and long period magnetotellurics) to investigate the Pyrenean structure, there are still fundamental questions regarding its basement and cover architecture. Specifically, the geometry at depth of significant bodies such as the Late Variscan intrusive granites and Triassic evaporitic accumulations, remains unclear. To better understand these issues, we have conducted joint magnetotelluric and gravity surveys along a 60-km-long transect, spanning the boundary between the Axial and South Pyrenean Zones. Our final geological interpretation shows that the La Maladeta batholith consists of two distinct granitic bodies related to different intrusive pulses. In addition, we identify important Triassic evaporitic accumulations at depth. This work shows the high potential of integrating two geophysical models for understanding the geological evolution of structurally complex areas. The magnetotelluric and gravity data are complementary, with each dataset providing a different resolution for investigating the basement and cover architecture of the Pyrenees. These resolutions depend on the varied petrophysical properties of the rocks involved, including water content and deformation grade., This work was funded by projects PID2020-114273GB-C22 and PID2020-113135RB-C31 funded by MCIN/AEI/10.13039/501100011033 and CGL2017-82169-C2-2-R, from the Spanish Ministry of Science and Innovation. The authors acknowledge the contribution of José María Llorente, Agustín González, and Arturo García for the acquisition of the gravity data. This study also represents a contribution to GeoAp Research Group (E01-20R) (Aragón Government).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Inversión gravimétrica del granito de Andorra-Mont Louis (Pirineos) y análisis de incertidumbre asociado

  • Escudero González, Rubén
  • García Pallero, José Luis
  • Ayala, C.
  • Rey-Moral, Carmen
  • Soto, Ruth
  • Rubio Sánchez-Aguililla, Félix Manuel
  • Bernardo, A.
  • Fernandez, Zulima
Los Pirineos constituyen un área de gran interés geológico, entre otros motivos por las anomalías en el flujo de calor asociado a los numerosos cuerpos graníticos que lo componen. Han sido muchos los investigadores que han estudiado la estructura de la corteza superior a partir de la integración de datos geofísicos en los estudios estructurales clásicos. En particular, la caracterización de la estructura del basamento cortical y su relación con la cobertera sedimentaria suprayacente constituye un reto debido a la falta de datos geofísicos en algunas zonas. En este trabajo se realiza una inversión gravimétrica de un perfil que atraviesa el granito de Andorra-Mont Louis. Para ello se ha empleado un nuevo software que, además del cálculo del modelo, proporciona un análisis de la incertidumbre de la profundidad estimada. Este análisis resulta fundamental para la determinación de los límites del granito y la eficacia de una posible prospección con fines de aprovechamiento geotérmico., Esta publicación es parte del proyecto de I+D+i CGL2017-84901-C2-2-P financiado por MCIN/AEI/10.13039/501100011033 y "FEDER, una manera de hacer Europa" y proyecto PID2020- 114273GB-C22 financiado por MCIN/AEI/10.13039/501100011033, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Magnetic fabrics in sedimentary Permian red beds in the Cadí basin (Southern Pyrenees), Fábricas magnéticas en rocas sedimentarias del Pérmico de la cuenca del Cadí (Pirineos Orientales)

  • Simón-Muzás, Ana
  • Casas-Sainz, Antonio M.
  • Soto, Ruth
  • Pueyo Morer, Emilio Luis
  • Beamud, Elisabet
  • Gisbert, Josep
  • Oliva-Urcia, Belén
In the Cadí basin (southern Pyrenees) a magnetic fabrics study has been carried out in detrital continental sediments from the Permian Lower Red and Upper Red Units (20 sites) in red siltstones, shales and medium-coarse grain sandstones, obtaining cylinders and oriented fragments. The magnetic foliation is parallel to the bedding plane. The maximum susceptibility axis, K1, is arranged in two subhorizontal maxima after tectonic correction: 1) with N-S direction and 2) with E-W direction. The palaeocurrents are arranged from an E-W to a WNW-ESE direction, thus indicating both sedimentary and tectonic conditionings., Se ha llevado a cabo en la cuenca del Cadí (Pirineos Orientales) un estudio de fábricas magnéticas en los sedimentos detríticos continentales de las unidades pérmicas Roja Inferior y Roja Superior (20 estaciones) en limolitas, lutitas y areniscas de grano medio-grueso extrayendo cilindros y fragmentos orientados. La foliación magnética es paralela al plano de estratificación. El eje de máxima susceptibilidad K1 se dispone en dos máximos subhorizontales tras la corrección tectónica: 1) con dirección N-S y 2) con dirección E-W. Las paleocorrientes se disponen en un abanico desde el E-W hasta el WNW-ESE. Se interpreta que las direcciones de la lineación magnética podrían estar condicionadas tanto por la sedimentación como por la tectónica., El presente trabajo ha sido financiado por los proyectos y ayudas a la investigación PID2020-114273GB-C22, PID2019-108753GB-C22, FPU19/02353, y MCIN/AEI/10.13039/501100011033, “ERDF Away of making Europe” y “ESF Investing in your future”. EB agradece a GGAC 2021 SGR00076 (AGAUR) y el Institut de Recerca Geomodels UB., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Imaging the crustal structure of the Central Pyrenees using Seismic Interferometry

  • Soto, Ruth
  • Andrés, Juvenal
  • Gabàs, Anna
  • Bellmunt, Fabian
  • Macau, Albert
  • Clariana, Pilar
  • Rey-Moral, Carmen
  • Rubio Sánchez-Aguililla, Félix Manuel
  • Izquierdo Llavall, Esther
  • Mochales López, Tania
  • Pueyo Morer, Emilio Luis
  • Ayala, C.
The Pyrenees constitute a natural laboratory where hundreds of geological and geophysical data have been acquired during the last decades. It represents a roughly E-W oriented doubly vergent orogen formed during the Alpine Orogeny. Deep seismic reflection data obtained during the 80s revealed its crustal architecture that resulted from the subduction of the Iberian plate under the European lithosphere at its central part. In this work we applied seismic interferometry to the same passive dataset through two different techniques aiming to construct two independent images of the Central Pyrenean lithosphere, to enhance the current knowledge of the area. The main objectives are to compare them and correlate the obtained results with previous data. Data were acquired within the IMAGYN project along a NE-SW 70 km-long profile extending from the Southern Pyrenees (Pedraforca and Cadí Units, northern Iberia) to the northern part of the Axial Zone, close to Ax-les-Thermes (France). Data came from three to five months of continuous recording from an almost linear array of 43 seismic stations (being 17 and 26 broadband and short-period stations, respectively). The two applied techniques are (1) the global-phase seismic interferometry (GloPSI), using continuous recordings of teleseismic (30¿ < epicentral distance < 95¿) and global earthquakes (> 120¿ epicentral distance), and (2) the use of continuous ambient seismic noise recordings through autocorrelation. Despite both methods rely on different energy sources, they are complementary and use static receivers. In the first method (GloPSI), we extracted global phases (PKP, PKiKP and PKIKP) and their reverberations within the lithosphere. The selected phases were autocorrelated and stacked to construct a high-resolution pseudo zero-offset reflection image. The second approach provided an approximation to the zero-offset reflection response of a single station. Results reveal features that can be correlated in both reflection images. The crust-mantle boundary is mapped as a relative flat interface at approximately 35-40 km depth. Crustal interfaces detected at 15 and 25 km depth can be related to the Conrad discontinuity and other compositional changes within the crust., This work is part of the project ¿High-resolution imaging of the crustal-scale structure of the Central Pyrenees and role of Variscan inheritance on its geodynamic evolution¿ (IMAGYN), PID2020-114273GB-C22 funded by MCIN/AEI/10.13039/501100011033
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Paleomagnetic study of Late-Carboniferous-Permian rocks from the Cadí Basin (Eastern Pyrenees): Tectonic implications

  • Simón-Muzás, Ana
  • Casas-Sainz, Antonio M.
  • Soto, Ruth
  • Pueyo Morer, Emilio Luis
  • Beamud, Elisabet
  • Oliva-Urcia, Belén
[EN] We have carried out a detailed paleomagnetic study of volcanic rocks (18 sites) and red beds (10 sites) from the Late-Carboniferous-Permian series of the Cadí Basin (Eastern Pyrenees). The study provides reliable Late Carboniferous-Permian paleomagnetic directions, in an area where paleomagnetic studies are scarce. The main characteristic component in both rock types shows a SSE direction with a shallow inclination and a dominant reverse polarity. The magnetic carriers, both in the volcanic rocks and the red beds, are magnetite and hematite. The main component is interpreted as a primary magnetization of Permian age in the red beds; in the Late Carboniferous volcanic rocks, the main component likely represents primary magnetization or early remagnetization. These results are consistent with the poles for the Iberian plate during the Permian and indicate an absence of regional vertical axis rotations for the Orri nappe, in whose hanging wall the Cadí Basin was transported southwards during the Pyrenean orogeny., This work was supported by projects grants PID2020-114273GB-C22, PID2019-108753GB-C22, and PID2019-104693GB-I00 funded by MCIN/AEI/10.13039/501100011033, “ERDF Away of making Europe” and grant FPU19/02353 funded by MCIN/AEI/10.13039/501100011033, “ERDF Away of making Europe” and funded by “ESF Investing in your future”. This study represents a contribution from the GeoAp (E01-20R) and the GeoTransfer (E32-20R) Research Groups (Aragón Government). EB thanks the Geomodels Research Institute and AGAUR 2021SGR00076., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Applying magnetic techniques to determine the evolution of reactive diapirs: A case study of the Lusitanian basin

  • Calvín, P.
  • Oliva-Urcia, Belén
  • Kullberg, J. C.
  • Torres-López, S.
  • Casas-Sainz, Antonio M.
  • Villalaín, Juan J.
  • Soto, Ruth
[EN] The western Iberian margin underwent complex evolution during the Mesozoic and Cenozoic. It was subjected to successive extensional and compressional phases, where salt tectonics played a significant role in both. The role of onshore structures during basin formation and inversion is not fully understood, and different chronological relationships between structures have been proposed. To better understand the history of salt body emplacement, we present paleomagnetic and magnetic fabric data from Jurassic carbonates, comprising cover rocks of the diapiric system. Magnetic fabrics show two types of behavior. Type 1 fabrics show magnetic foliation parallel to bedding—the magnetic lineation, after bedding correction, is horizontal and parallel to the diapiric contacts. This fabric is a consequence of overpressure during salt migration, whose effect is limited to the area near the diapirs. Type 2 fabric is characterized by a magnetic lineation parallel to the strike of bedding and—the intermediate and minimum magnetic axes are dispersed on a vertical girdle parallel to the shortening direction. This is interpreted as a compressional fabric that developed during basin inversion. Paleomagnetic results reveal a stable paleomagnetic component carry by magnetite with characteristic unblocking temperatures (175–450 °C) and coercivities (30–100 mT). Twelve of the 14 calculated mean directions show homogeneous behavior in their magnetic properties and directions, with positive inclinations, northward directions, with synfolding to postfolding behavior. We calculated the remagnetization direction (Dec: 347.5°, Inc.: 51.3°) and compare it to the APWP. It was likely acquired during the Cretaceous Normal Superchron, following the extensional deformation phase and prior to basin inversion. The paleodips (i.e., the bedding at remagnetization times) indicate that tilting occurred mainly during the extensional stage, meaning that the diapirs had already been developed. This indicates a strong Mesozoic salt tectonic component in the present-day structuring of this sector of the Lusitanian basin., This work was supported by projects PID2020-114273GB-C22 funded by MCIN/AEI/10.13039/501100011033, PID2019-108753GB-C22 of the Spanish Government (Ministerio de Ciencia e Innovación) and “Severo Ochoa” extraordinary grants for excellence IGME-CSIC (AECEX2021). Pablo Calvín acknowledges funding from PTA2017-14779-I and FJC2019-041058-I (Ministerio de Ciencia e Innovación, Spain) contracts., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Sobre las dependencias funcionales entre la densidad y las velocidades de las ondas P y S para rocas del Pirineo Central, On the dependencies between density, P-wave and S-wave velocities for the Central Pyrenees rocks

  • Cuchet, C.
  • Ayala, C.
  • Alcalde, Juan
  • Beamud, Elisabet
  • Clariana, Pilar
  • Soto, Ruth
  • Carbonell, Ramón
El conocimiento de las propiedades físicas de las rocas mediante medidas directas, ya sea en laboratorio o en sondeos, es fundamental para construir gemelos digitales precisos del ¿Sistema Tierra¿ en general y de contextos geológicos concretos, en particular. La obtención de medidas de propiedades físicas reales permite evaluar posibles relaciones entre ellas y, a partir de estas relaciones, extrapolar en zonas donde no se tengan datos. En este trabajo se presentan los primeros resultados de medidas de velocidades de las ondas P (Vp) y S (Vs) en muestras de rocas del Pirineo Central de distintas litologías realizadas con el dispositivo portátil A1220 MONOLITH 3D. Para ello se utilizaron muestras de roca, cortadas en cubos, de dos tamaños distintos (2 cm de lado y unos 10 cm de lado) donde previamente se había medido su densidad mediante el principio de Arquímedes. Ello permitió testar las posibles limitaciones del aparato en función del tamaño de las muestras y las ventajas de su uso cuando no se pueden obtener medidas directamente en el campo y/o cuando las muestras que se pretenden medir no tienen el tamaño suficiente como para utilizar instrumentos más sofisticados como el corescan. Los resultados indican una correlación lineal entre Vp y Vs para todo tipo de rocas mientras que la relación entre las velocidades de las ondas sísmicas y las densidades no es lineal, sino que muestra un rango de variación que no siempre puede ser ajustado mediante una función polinómica., Knowledge of the physical properties of rocks through direct measurements, whether in the laboratory or in drillholes, is essential to build accurate digital twins of the “Earth System” in general and of specific geological contexts, in particular. Obtaining measurements of real physical properties allows us to evaluate possible relationships between them and, from these relationships, extrapolate in areas where data are not available. This work presents the first results of the measurements of P-wave (Vp) and Swave (Vs) velocities in rock samples from the Central Pyrenees carried out with the portable measuring instrument A1220 MONOLITH 3D. For this, rock samples were used, cut into cubes, of two different sizes (2 cm on a side and about 10 cm on a side) where their density had previously been measured using Archimedes’s principle. This allowed us to test the possible limitations of the device depending on the size of the samples and the advantages of its use when measurements cannot be obtained directly in the field and/or when the samples to be measured are not large enough to use instruments more sophisticated like corescan. The results show a linear correlation between Vp and Vs for all types of rocks while the relationship between seismic wave velocities and densities is not linear, but rather shows a range of variation that cannot always be adjusted by a polynomial function., This contribution is supported by the EU project AGEMERA, funded under the European Union’s Horizon Europe research and innovation programme, grant agreement n. 101058178 and the IMAGYN project, PID2020-114273GB-C22, funded by MCIN/AEI/10.13039/501100011033, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Geology of the Late Carboniferous, Permian and Early Triassic basins of the Eastern Pyrenees

  • Gisbert, Josep
  • Simón-Muzás, Ana
  • Casas-Sainz, Antonio M.
  • Soto, Ruth
[EN] We present a detailed geological map of the Upper Carboniferous, Permian and Triassic rocks of the southern border of the Axial Zone in the Eastern Pyrenees. These units were deposited in three intra-mountain, terrestrial basins, characterized by the emplacement/deposition of volcanic, sub-volcanic and volcaniclastic units (ca. 1000 m thick) together with continental red beds. The map is based on unpublished drafts, sketches and structural data. This previous information was complemented with new structural, petrologic and stratigraphic data. The geological map is presented together with three cross-sections, a detailed lithological description, and a stratigraphic correlation panel to help understand the stratigraphy, volcanism and structure and, ultimately, the geometry and origin of the highly subsident areas of this segment of the chain in post-Variscan times. The geological map gives new clues for reconstructing the geometry of these basins and the distribution of the volcanic episodes during the Late Carboniferous and Permian., The authors thank the financial support from the projects grants PID2020-114273GB-C22, PID2019-108753GB-C22 and FPU19/02353 funded by MCIN/ AEI/10.13039/501100011033, ‘ERDF Away of making Europe’ and ‘ESF Investing in your future’., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Origin of oblique structures controlled by pre-tectonic thickness variations in frictional and salt-bearing fold-and-thrust belts: Insights from analogue modelling

  • Santolaria, Pablo
  • Izquierdo Llavall, Esther
  • Soto, Ruth
  • Román-Berdiel, T.
  • Casas-Sainz, Antonio M.
[EN] This work includes, first, a synthesis of experimental analogue modelling programs assessing the influence of along-strike thickness variations in the development of oblique structures in fold-and-thrust belts. As a second part, we present a new experimental program testing, systematically, the influence of tapered décollement-cover thrust wedges. Previous experiments show that frictional, brittle models feature numerous, short-wavelength structures where the cover is thinner. Deformation fronts are totally or locally oblique to the backstop when the cover thinning is progressive or sharp, respectively. Low (<30°) or higher structural obliquities occur when thickness variations are progressive or sharp, respectively. The addition of a basal or intermediate décollement, commonly entails the transference of deformation towards its external pinch-out. Consequently salients occur and transfer zones and oblique structures form over décollement boundaries. Their location and orientation strongly depend on the pre-compressional shape of the décollements. Furthermore, as demonstrated by our modelling results, tapered brittle covers over viscous décollements result in asymmetric thrust wedges formed by structures that end or change their vergence laterally, resulting in obliquities generally <30°. Two natural case studies, showing strong (South Pyrenean Central Salient) or moderately oblique (Keping Shan fold-and-thrust belt) structures are revisited and compared to the described analogue models., This work is part of the I+D+i research projects CGL2016-77560-C2, PID2019-108753 GB-C2 and PID2020-114273 GB-C22 funded by MICIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Salt Distribution in the South Pyrenean Central Salient: Insights From Gravity Anomalies

  • Santolaria, Pablo
  • Ayala, C.
  • Soto, Ruth
  • Clariana, Pilar
  • Rubio Pascual, Francisco Javier
  • Martín León, Juliana
  • Pueyo Morer, Emilio Luis
  • Muñoz, Josep A.
[EN] Triassic evaporites represent the regional décollement of the Pyrenees and form two salt provinces north and south of the South Pyrenean Central Salient (SPCS). We present an updated Bouguer and residual Bouguer anomaly map built upon the homogenization of available gravity data of the SPCS together with four new and representative cross-sections, constrained by geological data acquired in the field, seismic, well, and gravity data (gravity forward modeling). Gravity anomaly maps and cross-sections are used to characterize the present-day uneven distribution of Triassic evaporites. Outcropping Triassic evaporites is not necessarily associated with an underlying evaporite accumulation and the absence of it at surface does not involves its non-existence at depth. Northwest of the salient, a major accumulation of Triassic evaporites floors a thick syn-orogenic Upper Cretaceous basin. South of it, Triassic rocks core salt-detached anticlines related to the Pyrenean orogeny. Along the southernmost (and youngest) thrust sheet of the salient, diapirs, and evaporite accumulations are associated with a salt-inflated area., This work is part of the project PID2020-114273GB-C22, High-resolution imaging of the crustal-scale structure of the Central Pyrenees and role of Variscan inheritance on its geodynamic evolution (IMAGYN), funded by MICIU/AEI/10.13039/501100011033 and the project PID2020-117598GB-I00, Structure and Deformation of Salt-bearing Rifted Margins (SABREM), funded by MICIU/AEI/11.13039/501110011133 from the Spanish Ministry of Science and Innovation and the “Severo Ochoa” extraordinary grants for excellence IGME-CSIC (AECEX2021)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (AECEX2021)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Imprint of paleocurrents, extensional and compressional deformation in the magnetic fabrics of the Permo-Triassic red beds of the Cadí Basin (Eastern Pyrenees)

  • Simón Muzás, Ana
  • Soto, Ruth
  • Pueyo Morer, Emilio Luis
  • Beamud, Elisabet
  • Oliva-Urcia, Belén
  • Casas Sainz, Antonio
A magnetic fabric study was carried out in Permo-Triassic continental sedimentary red beds from the Cadí Basin (Eastern Pyrenees). These rocks were deposited on the top of a volcanic sequence when the regional tectonic regime changed from transtension to extension. Standard paleomagnetic cores (cylinders), cubes and irregular fragments were obtained for this study in 25 sites distributed throughout the basin. The ¿fragment methodology¿, using oriented irregular fragments in claystones, is demonstrated to be successful and replicable. The aims of this study are (i) to interpret the magnetic fabrics in red beds according to sedimentary or tectonic models; (ii) to establish the relationship between the magnetic fabrics in the sedimentary red beds and the magnetic fabrics previously obtained in the underlying volcanic series, and (iii) to compare magnetic fabrics in continental sediments with other basins of the same age to interpret the tectonic scenario in the Iberian plate during Permian and Triassic times. The results obtained reveal a primary magnetic fabric that recorded a syn-sedimentary stretching in two nearly perpendicular directions, WNW-ESE and N-S, linked to basin development. Other sedimentary and tectonic factors, such as paleocurrents and deformation derived from the Alpine compression did not have a significant influence on the development of magnetic fabrics. The geodynamic scenario of the Iberian plate during Late Permian to Triassic times can be explained according to regional trajectories of extensional stress due to the activity of the North-Pyrenean fault zone., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. Funding from this work comes from projects grants PID2020-114273 GB-C22, PID2019-108753 GB-C22 and FPU19/02353 funded by MCIN/ AEI/10.13039/501100011033, “ERDF A way of making Europe” and “ESF Investing in your future”.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Bouguer and aeromagnetic anomalies in the Iberian Chain (NE Spain): a qualitative interpretation, Anomalías de Bouguer y aeromagnéticas de la Cordillera Ibérica (NE España): una interpretación cualitativa

  • Soto, Ruth
  • Gamisel-Muzás, África
  • Ayala, C.
  • Martín León, Juliana
  • Mochales López, Tania
  • Rey Moral, María del Carmen
  • Rubio Sánchez-Aguililla, Félix Manuel
[EN] This work shows the Bouguer and aeromagnetic anomaly maps of the Iberian Chain (NE Spain) and surroundings in relation to its main geological and structural units. In general, both gravity and aeromagnetic anomalies are aligned following the same trends in both maps highlighting the major role played by the structural configuration of the Iberian Chain on their origin. In detail most anomalies do not coincide, pointing to different potential field sources to account for them. Further studies would be needed to decipher the origin of most magnetic anomalies observed in the Iberian Chain., [ES] Este trabajo muestra los mapas de anomalías de Bouguer y aeromagnéticas de la Cordillera Ibérica (NE España) y zonas limítrofes y su relación con sus principales unidades geológicas y estructurales. A grandes rasgos, ambos tipos de anomalías se alinean siguiendo las mismas directrices lo que sugiere el importante papel jugado por la configuración estructural de la Cordillera Ibérica en su origen. En detalle, muchas anomalías gravimétricas y magnéticas no coinciden, señalando su distinto origen. Más estudios serían necesarios para descifrar el origen de la mayoría de las anomalías magnéticas observadas en la Cadena Ibérica., This work was funded by project PID2020-114273GB-C22 funded by MCIN/AEI/10.13039/501100011033 from the Spanish Ministry of Science and Innovation. This study represents a contribution to GeoAp Research Group (E01-20R) (Aragón Government). AGM thanks a contract from “Programa Investigo” (Comunidad de Madrid) financed by the European Union-Next Generation in the frame of the Recovery, Transformation and Resilience Plan., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

La relación entre el metamorfismo y la deformación Varisca en el macizo de La Pallaresa, sector central de la Zona Axial pirenaica, Relationship between metamorphism and Variscan deformation in the Pallaresa massif, central sector of the Pyrenean Axial Zone

  • Clariana, Pilar
  • García-Sansegundo, Joaquín
[EN] The crystallization–deformation relationship and the microstructural analysis of metasedimentary rocks in the La Pallaresa Massif and the contact area with the Aston and Hospitalet gneissic domes have made it possible to identify two HT-LP metamorphic events and characterize their relationship with the Variscan deformation events in this sector of the Pyrenean Axial Zone. These metamorphic episodes are: (i) the first one, represented by low-grade mineral assemblages, which could occasionally reach medium–grade conditions, and is syntectonic with the first Variscan deformation event; (ii) the second episode presents medium–high–grade metamorphic mineral associations, it is the main one in this area, and coeval with the last Variscan deformation event. It is associated with an extensional event, which favoured magmatic intrusions during the last stages of the Variscan Orogeny., [ES] La relación cristalización–deformación y el estudio microestructural de las rocas metasedimentarias del macizo de la Pallaresa y de la zona de contacto con los domos gneísicos del Aston y del Hospitalet, han permitido identificar dos episodios metamórficos (AT-BP) y caracterizar su relación con los eventos de deformación producidos durante la Orogenia Varisca en este sector de la Zona Axial pirenaica. Los episodios metamórficos son: (i) el primero, representado por asociaciones minerales de bajo grado metamórfico, que pudo alcanzar condiciones de grado medio, y principalmente sin tectónico con el primer evento de deformación Varisca; (ii) el segundo episodio, con asociaciones minerales de grado medio–alto, sería el principal y contemporáneo con el evento más tardío de deformación Varisca. Este evento es extensional y favoreció las intrusiones magmáticas en etapas tardías de la Orogenia Varisca., Este trabajo fue financiado por el IGME, y el IEA y por el proyecto “ERDF A way of making Europe”, PID2020-114273GB-C22 financiado por el MCIN/AEI/10.13039/501100011033, Ministerio de Ciencia e Innovación. Este estudio es una contribución del Grupo de Investigación GeoAp (E01-23R) del gobierno de Aragón., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

La Maladeta and Bono granites at depth from geophysical data (Central Pyrenees), Los granitos de La Maladeta y Bono en profundidad a partir de datos geofísicos (Pirineo Central)

  • Soto, Ruth
  • Clariana, Pilar
  • Ayala, C.
  • Piña-Varas, Perla
  • García-García, Arturo
  • Martín-León, Juliana
  • Gamisel-Muzás, África
  • Mochales López, Tania
  • Rey-Mora, Carmen
  • Rubio, Félix
[EN] This work aims to show a compilation of geophysical data (gravi-ty, magnetic and magnetotelluric data) to determine the upper crus-tal structure and geometry at depth of the La Maladeta and Bono granites (Central Pyrenees). La Maladeta granite is interpreted as an asymmetric granitic complex 8 km-thick formed by two differen-tiated bodies and with a clearly northwards deepening. By contrast, the Bono granite shows a laminar geometry and its thickness does not reach 1.5 km. Both granites show higher areal extension at depth than that showed by their outcrops at surface., [ES] Este trabajo tiene como principal objetivo mostrar una compila-ción de datos geofísicos (datos gravimétricos, magnéticos y magne-totelúricos) para caracterizar la estructura de la corteza superior y la geometría en profundidad de los granitos de La Maladeta y Bono (Pirineo Central). El granito de La Maladeta se interpreta como un complejo granítico asimétrico de 8 km de espesor y formado por dos cuerpos diferenciados. Por otro lado, el granito de Bono presenta una geometría laminar y un espesor menor de 1.5 km. Ambos gra-nitos presentan un volumen en profundidad mayor que el que se observa en superficie., This work is part of the research pro-ject PID2020-114273GB-C22 funded by MCIN/EI/10.13039/501100011033 from the Spanish Ministry of Science and Innovation. This study represents a contribution to GeoAp Research Group (E01-20R) (Aragón Government)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The geological structures of the Pyrenees and their peripheral basins examined through EMAG2v2 magnetic data

  • Gamisel-Muzás, África
  • Soto, Ruth
  • Ayala, C.
  • Mochales López, Tania
  • Rubio, Félix M.
  • Clariana, Pilar
  • Rey-Moral, Carmen
  • Martín-León, Juliana
The major goal of this work is to provide insight into the structural and geological anatomy of the Pyrenees based on the magnetic anomalies and inferred lineaments from Earth Magnetic Anomaly Grid 2 arcmin resolution (EMAG2v2) magnetic data. We focus on providing qualitative and semi-quantitative evidence of the magnetic signature of the Pyrenees mountain range domains and structures. The integration of reduced-to-the-pole and processed maps, as well as the Bouguer anomaly map with geological data, has proved to be significantly useful in order to shed light on the main anomaly sources. Considering their magnetic response and texture, several anomalies can be linked to buried geological bodies or changes in the magnetic character of the basement. We have estimated their source bodies' depth through Euler and power spectrum calculations. We have identified and confirmed eight magnetic zones with different features and interpreted them in terms of the geological and structural setting of the area: one on the Aquitaine Basin with the highest magnetic response in the area, linked to the Sub-Pyrenean Thrust; three along the North Pyrenean Zone linked to mantle materials; one to the east of the Axial Zone representing the boundary between the Pyrenean mountain range and the Mediterranean Sea; two more located in the Catalan Coastal Range related to the volcanic fields in the area; and one in the Gulf of Lyon caused by a thicker crustal block. The result is an overall interpretation of the Pyrenees main magnetic domains., This research has been supported by the Ministerio de Ciencia e Innovación (grant no. MCIN/AEI/10.13039/501100011033). We also received support from the Severo Ochoa Extraordinary Grants for Excellence for IGME-CSIC (AECEX2021). The article processing charges for this open-access publication were covered by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., This study is part of the work developed during the “Plan de recuperación, transformación y resiliencia, del Programa Investigo (Convocatoria 2022, Orden de 25 de marzo de 2022, del Consejero de Economía, Hacienda y Empleo, de la Comunidad de Madrid)” and the “High-resolution imaging of the cristal scale structure of the Central Pyrenees and role of Variscan inheritance on its geodynamic evolution” (IMAGYN) project (PID2020114273GB-C22). The authors of this paper are part of CSIC-HUBs (Connections CSIC) – Geosciences for a Sustainable Planet., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Influencia del grado metamórfico en la densidad de las rocas metasedimentarias paleozoicas de los Pirineos Centrales, Influence of the metamorphic grade on the density of Palaeozoic metasedimentary rocks of the Central Pyrenees

  • Clariana, Pilar
  • Salgado Blanco, Iban
  • Soto, Ruth
  • Margalef, A.
  • Izquierdo Llavall, Esther
  • Mochales López, Tania
  • Pueyo Morer, Emilio Luis
  • Ayala, C.
Comunicación presentada en la LXXVII Sesión Científica / SGE, Boltaña, 29 de noviembre de 2024., [EN] Systematic sampling of Palaeozoic metasedimentary rocks in a sector of the central Pyrenees has been carried out within the framework of two projects focused on the geophysical investigation of potential fields. This sampling, whose objective was the study of petrophysical properties, has allowed the analysis of rock density data obtained from 290 samples. At the same time, the density variation has been analysed as a function of the metamorphic grade of each lithostratigraphic units and the protolith composition. The results show that the High-Temperature and Low-Pressure (HT-LP) metamorphism in the area influenced the rock density, generally producing an increase in density with respect to that of the protolith., [ES] En el marco de dos proyectos centrados en la investigación geofísica de campos potenciales se ha llevado a cabo el muestreo sistemático de las rocas metasedimentarias paleozoicas de un sector de los Pirineos centrales. Este muestreo, cuyo objetivo era el estudio de las propiedades petrofísicas, ha permitido el análisis de los datos de densidad de las rocas obtenidos a partir de 290 muestras. A su vez, se ha analizado la variación de esta propiedad en función del grado metamórfico que afecta a las unidades litoestratigráficas y de la composición inicial de las mismas. Este estudio ha puesto de manifiesto que el metamorfismo de Alta temperatura y baja presión (AT-BP) existente en la zona influye en la densidad de las rocas produciendo, generalmente un aumento de la misma con respecto a la del protolito., Este trabajo ha sido financiado por el Proyecto PID2020-114273GB-C22 financiado por MCIN/AEI-/10.13039/501100011033 del Ministerio de Ciencia Innovación y Universidades. Este estudio representa una contribución al grupo de investigación GeoAp (E01-23R) (Gobierno de Aragón). Los autores del trabajo forman parte de la Conexión Geociencias para un Planeta Sostenible (CSIC-HUBs)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Paleogeographic imprint of a piggy-back basin rotation: the Ainsa Basin (South-central Pyrenees), Huella paleogeográfica de la rotación de una cuenca piggy-back: la Cuenca de Aínsa (vertiente sur del Pirineo central)

  • Barnolas Cortina, Antonio
  • Mochales López, Tania
Comunicación presentada en la LXXVII Sesión Científica / SGE, Boltaña, 29 de noviembre de 2024., [EN] Sedimentary geometries and paleocurrent distribution from the Ainsa basin support the paleomagnetic data about its rotation and chronology. The Ypresian foreland platform margin, folded in the Boltaña anticline, predates thrusting and related piggyback basin transport. An early Lutetian initiation for the thrust–fold of the Boltaña – Balces system is consistent with the onlap geometries on the east limb of the Boltaña anticline. In the mid Lutetian, growth strata followed by an angular unconformity in the carbonate west limb of the Balces anticline postdates the fault-propagation folding in the Boltaña-Balces system. The forced deltaic progradation that filled the Ainsa basin following the syncline geometry during the mid to late Lutetian (Sobrarbe Fm) track this mid-Lutetian unconformity. The Campodarbe Group, including the Escanilla Fm (Bartonian – middle Priabonian), is connected to the hinterland tectonic uplifting by the Gavarnie thrust with a new palaeogeography and basin configuration. Sedimentary data reinforce a post-Lutetian (Bartonian – middle Priabonian) main event of rotation., [ES] La geometría sedimentaria y distribución de paleocorrientes en la Cuenca de Aínsa, son coherentes con los datos paleomagnéticos de la rotación y su cronología. El margen de la plataforma de antepaís Ypresiense, plegado por el anticlinal de Boltaña, es anterior al cabal-gamiento y emplazamiento de la cuenca piggyback asociada. Un ini-cio del cabalgamiento y pliegues asociados del sistema Boltaña-Balces para el Luteciense inferior, es coherente con la geometría en onlap en el flanco oriental del anticlinal de Boltaña. La discordancia progresiva y angular de las calizas del Luteciense medio del flanco occidental del anticlinal del Balces postdata el sistema de pliegues de propagación de falla de Boltaña-Balces. La progradación deltaica forzada del Lu-teciense medio y superior que rellena la cuenca de Ainsa siguiendo la geometría del sinclinal es posterior a la discordancia del Luteciense medio. El Grupo Campodarbe, incluida la Fm Escanilla (Bartoniense - Priaboniense medio) está relacionado con el levantamiento tectónico del margen activo por el cabalgamiento de Gavarnie, con una nueva configuración paleogeográfica de la cuenca. La información sedimen-taria apoya una edad post-Luteciense (Bartoniense– Priaboniense medio) para el evento principal de rotación., The original data acquisition was sponsored by a PhD IGME fellowship (T. Mochales), a 2015 Research Grant from the Sobrarbe Geopark (GEO/3.2.1.3), and financial support of CGL-2006-2289-BTE MEC and CGL2008-00809/BTE MICINN research projects. This work is supported by projects PID2020-114273GB-C22 and PID2019-108753GB-C22.The contribution of A. Barno-las to this work is supported by PID2021-122467NB-C21 and PID2021-123917OB-I00 Projects (Agencia Estatal de Investigación)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Paleomagnetic and magnetic data of the Lusitanian basin

  • Calvín, P.
  • Oliva-Urcia, Belén
  • Kullberg, Jose
  • Torres-López, S.
  • Casas-Sainz, Antonio M.
  • Villalaín, Juan J.
  • Soto, Ruth
Paleomagnetic and magnetic fabrics (AMS) from 45 sites of Mesozoic rocks of the Lusitanian basin, as well as waypoints of the sites. Associated to the article Calvín, P., Oliva-Urcia, B., Kullberg, J. C., Torres-López, S., Casas-Sainz, A., Villalaín, J. J., & Soto, R. (2023). Applying magnetic techniques to determine the evolution of reactive diapirs: A case study of the Lusitanian basin. Tectonophysics, 868, 230088. https://doi.org/10.1016/j.tecto.2023.230088, Ministerio de Ciencia, Innovación y Universidades FJC2019-041058-I Ministerio de Ciencia, Innovación y Universidades PID2019-108753GB-C22 Ministerio de Ciencia, Innovación y Universidades PID2020-114273GB-C22 Ministerio de Ciencia, Innovación y Universidades MCIN/AEI/10.13039/501100011033 Ministerio de Ciencia, Innovación y Universidades PTA2017-14779-I, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Secondary precipitation of Fe–Ti oxides as a source for strongly changing magnetic properties in ancient volcanic rocks (Cadí Basin, Pyrenees)

  • Simón-Muzás, Ana
  • Casas-Sainz, Antonio M.
  • Soto, Ruth
  • Oliva-Urcia, Belén
[EN] Strong changes of magnetic properties (magnetic susceptibility and natural magnetic remanence) affecting large volumes of rocks can be conditioned by a series of factors, including circulation of hydrothermal fluids or meteoric waters, often favored by the primary porosity of the rock or pervasive fracturing. In the Late Carboniferous-Permian Cadí Basin, in the Eastern Pyrenees, there are volcanic rocks that show a unique pattern of magnetic anomalies up to 200 nT in amplitude revealing a heterogeneous distribution of their magnetic properties. To unravel the origin of these anomalies, we performed a detailed study of the magnetic properties of the volcanic and volcaniclastic rocks, combined with magnetic surveying and analysis of brittle structures. The results indicate that the origin of the strong variations in the magnetic properties is linked to: (i) lithological changes within the volcanic series, and (ii) the inhomogeneous secondary precipitation of ferromagnetic minerals. As a result of these secondary processes, magnetic fabrics do not reliably record either the volcanic paleoflow or the deformation imprint. The mineralogical composition can be interpreted as the result of a strong hydrothermal alteration that took place during early diagenetic stages, which was also responsible for the neoformation of magnetite crystals with variable titanium content. Random fluid circulation during the Late-Variscan stage could be the origin of these strong variations in magnetic properties., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. This study has been supported by Project grants PID2020-114273GB-C22, PID2019-108753GB-C22, PID2023-148256NB-I00 and FPU19/02353 funded by MCIN/ AEI/10.13039/501100011033 “ERDF Away of making Europe” and “ESF Investing in your future”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Interplay of caldera and tectonic subsidence in an inverted Late Carboniferous–Permian basin (Central Pyrenees)

  • Simón-Muzás, Ana
  • Soto, Ruth
  • García-Lasanta, C.
  • Housen, Bernard
  • Gisbert Aguilar, Josep
  • Casas-Sainz, Antonio M.
24 p., [EN] Deposits of thick volcanic and volcaniclastic series can be interpreted as either related to regional tectonics (commonly extensional or transtensional tectonics) or local volcanic mechanisms (caldera collapse). In order to distinguish between these two end-member mechanisms, we propose the use of magnetic techniques, namely analysis of Anisotropy of Magnetic Susceptibility (AMS) and paleomagnetism, and analysis of geological structures. These techniques have been applied to the Estac Basin (Central Pyrenees), an inverted Late Carboniferous-Permian basin now involved in the antiformal stack of the Pyrenean belt. AMS data provide directions of flow of volcanic rocks that can be interpreted in terms of palaeo-slopes and therefore can be related to structures contemporary with deposition and Late Carboniferous-Permian volcanic activity. The maximum of the magnetic lineation (i.e. volcanic paleoflow) direction is bimodal, with (i) an absolute maximum (as occurring in most South-Pyrenean Late Carboniferous-Permian basins) along a WNW-ESE direction and (ii) a secondary magnetic lineation along an N-S direction. Paleomagnetic data obtained from the volcanic products show a primary magnetization or early remagnetization compatible with the Late Carboniferous-Permian paleomagnetic reference direction and allow us to reconstruct an early folding probably related to the warping of the basin. The magnetic and structural data can be interpreted according to a volcano-tectonic subsidence model in which E-W faults played a major role and caldera collapse contributed to the important thickness of the volcaniclastic deposits., This study has been supported by Project grants PID2020-114273 GB-C22, PID2019-108753 GB-C22, FPU19/02353 and EST22/00287 for the mobility and stage at Western Washington University funded by MCIN/ AEI/10.13039/501100011033, "ERDF Away of making Europe" and "ESF Investing in your future"., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

New geochronological and structural evidence of Alpine deformation overlapping existing Variscan structures (Pyrenean Axial Zone)

  • García-Sansegundo, Joaquín
  • Clariana, Pilar
  • Rubio Ordóñez, A.
  • Soto, Ruth
16 p., [EN] The Pyrenean Axial Zone, composed of Precambrian and Paleozoic rocks, lies at the core of the Alpine orogen and records deformation from both the Variscan and Alpine orogenies. Separating these events is challenging due to limited geochronological constraints and the scarcity of post-Permian rocks that would exclusively reflect Alpine deformation. In this study, we present new U–Pb zircon geochronological data from an andesite-dacite sill folded within the regional Variscan foliation (S<inf>1</inf>) affecting Silurian black shales. The sill, located between the Garona Dome and the Aran Valley Synclinorium, yields an early–middle Permian age of 274 ± 1.5 Ma, confirming its emplacement after Variscan deformation (ca. 380–290 Ma). The folds affecting the sill are therefore Alpine in origin and are associated with a penetrative crenulation lineation observed in the Garona Dome. This suggests that the dome's macrostructural geometry (interpreted as Variscan by some authors) may instead be Alpine. Additionally, ductile Alpine structures have been characterised in this sector, further supporting the reinterpretation of key features in the Axial Zone. These findings highlight the importance of integrating precise geochronological data to reliably interpret complex deformation histories in regions shaped by multiple orogenic phases., This work has been funded by the projects: PID2020-114273 GB-C22, High-resolution imaging of the crustal-scale structure of the Central Pyrenees and role of Variscan inheritance on its geodynamic evolution (IMAGYN) and PID2020-118228RB-C21; Multi-scale observatory of lithospheric and surface processes in a poly-orogenic system and their societal impacts: the Cantabrian natural laboratory (CANALAB), funded by MICIU/AEI/10.13039/501100011033; the Counseling of Science, Innovation and Universities of the Principado de Asturias/Foundation for the Promotion of Applied Scientific Research and Technology in Asturias (FICYT), reference: SV-PA-21-AYUD/2021/51293., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Gravity data on the Central Pyrenees: a step forward to help a better understanding of the Pyrenean structures

  • Ayala, C.
  • Rey-Moral, C.
  • Rubio, F.
  • Soto, R.
  • Clariana, P.
  • Martin-Leon, J.
  • Bellmunt, F.
  • Gabas, A.
  • Macau, A.
  • Casas, A.M.
  • Marti, J.
  • Pueyo, E.L.
  • Benjumea, B.
In this work, we present new Bouguer and residual Bouguer anomaly maps of the Central Pyrenees calculated from 3590 stations, of which 1141 are new observations acquired from surveys performed between 2018 and 2019. The most prominent feature of the Bouguer anomaly is the long wavelength elongated minimum in its central part that continues to the W and ends towards the E with a positive gradient that seems to envelope the minimum. Other short and medium wavelength minima are superimposed, some placed over the batholithic outcrops. In the residual Bouguer, the main relative minima are related with outcrops of batholiths or interpreted buried granites except for the prominent minimum South of La Maladeta Granite, associated with Triassic evaporitic accumulations. These maps (shown on the Main Map) will help characterizing the Permo-Carboniferous batholiths of the Central Pyrenees, in particular La Maladeta and Andorra Mont-Louis granites in order to add constraints to the mechanism of their emplacement.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Axial longitudinal flow in volcaniclastic materials of the Late-Carboniferous-Permian Cadí basin (Southern Pyrenees) determined from Anisotropy of Magnetic Susceptibility

  • Simón-Muzás Ana
  • Casas-Sainz, Antonio
  • Soto, Ruth
  • Gisbert Aguilar, Josep
  • Román-Berdiel, Teresa
  • Oliva-Urcia, Belén
  • Pueyo, Emilio L.
  • Beamud, Elisabeth
The aim of this work is the application of the anisotropy of magnetic susceptibility (AMS) to the study of volcanic materials from the Late Carboniferous-Permian Cadí basin (southern Pyrenees) in order to (i) explore the limits of this technique in ancient volcanic materials that have undergone strong chemical alteration and a complex tectonic evolution and (ii) provide new insights on the deposition of volcanic materials in this tectonically controlled sedimentary basin. To establish a comparison with the petrofabric of rocks, AMS was complemented with observations and orientation analyses at the outcrop scale, in oriented polished blocks and in thin sections under the microscope. High resolution sampling (620 specimens from 56 sites located in five transects along a sequence 150 m thick) allowed to characterize the volcaniclastic and lava flow series. The AMS results show a fairly constant average magnetic lineation oriented WNW-ESE (in situ and tilt-corrected) and two secondary maxima (N-S to NE-SW in some areas). The magnetic mineralogy analyses indicate the contribution of paramagnetic and ferromagnetic (magnetite, Tc 580 °C) phases to susceptibility. The magnetic fabric has a close relationship with the spatial distribution and orientation of the mineral and grain components of the studied rocks, mainly controlled by depositional processes, with a negligible contribution of the tectonic imprint. Therefore, the magnetic lineation (i.e. K1 axes) can be reliably used as a paleoflow indicator. Nevertheless, it was not possible to establish a clear correspondence between lithological and magnetic fabric types. The results obtained indicate that the AMS approach represents a powerful tool to infer the paleoflow pattern in ancient volcanic and volcaniclastic rocks, even under a priori unfavourable conditions.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Petrophysical Characterization of Non-Magnetic Granites; Density and Magnetic Susceptibility Relationships

  • Pueyo, Emilio L.
  • Román-Berdiel, Teresa
  • Calvín, Pablo
  • Bouchez, Jean Luc
  • Beamud, Elisabet
  • Ayala, Conxi
  • Loi, Francesca
  • Soto, Ruth
  • Clariana, Pilar
  • Margalef, Aina
  • Bach, Nuria
  • Schamuells, Nia
  • Rubio, Félix M.
  • Gimeno, Ana
  • Fernández de Arévalo, Elena
  • Rey-Moral, Carmen
  • García, Arturo
  • Martí, Joan
  • Casas, Antonio M.
  • García-Lobón, José Luis
In this work we establish reliable correlations between density and magnetic susceptibility in three paramagnetic granites from the Pyrenees. In total, 128 sites (310 density measurements and >2600 susceptibility ones) were studied in the Mont Louis-Andorra, Maladeta and Marimanha granitic plutons covering the main range of variability of magnetic susceptibility. Regressions were calculated for every granitic body and an integrated linear function was obtained for the entire dataset: \u03c1 (kgm3) = 2566 (kgm3) + 0.541\u03ba (10\u22126 S.I.) (R:0.97). This relationship is only valid in the paramagnetic domain, where iron is mostly fractioned in iron-bearing phyllosilicates and the occurrence of magnetite is negligible (or at least its contribution to the bulk susceptibility). This relationship, likely different in other bodies, allows for transforming magnetic susceptibility data into density data, helping to constrain gravity modelling when density data from rock samples are scarce. Given the large amount of AMS studies worldwide, together with the quickness and cost-effectiveness of susceptibility measurements with portable devices, this methodology allows for densifying and homogenizing the petrophysical data when modelling granite rock volumes based on both magnetic and gravimetric signals.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Basement and cover architecture in the Central Pyrenees constrained by gravity data

  • Clariana, P.
  • Soto, R.
  • Ayala, C.
  • Casas-Sainz, A. M.
  • Román-Berdiel, T.
  • Oliva-Urcia, B.
  • Pueyo, E. L.
  • Beamud, E.
  • Rey-Moral, C.
  • Rubio, F.
  • Margalef, A.
  • Schamuells, S.
  • Bach, N.
  • Martí, J.
A new gravity survey (1164 gravity stations and 180 samples for density analysis) combined with two new geological cross sections has been carried out in a sector of the Central Pyrenees in order to improve the characterization of basement and cover architecture. From North to South, the study area comprises the southern half of the Axial Zone and the northernmost part of the South-Pyrenean Zone. New gravity data were combined with previous existing databases to obtain the Bouguer and residual anomaly maps of the study area. The two cross sections, oriented NNE–SSW, were built from field data and previous surficial and subsurface data and cross the La Maladeta plutonic complex. The residual anomaly map shows values ranging from -18 to 16 mGal and anomalies mainly oriented N120E. The two 2.5D modelled cross sections show similar observed gravity curves coinciding with similar interpreted structural architecture. Data show a gravity high oriented N120E coinciding with the Orri basement thrust sheet and an important gravity depression, with the same orientation, coinciding with the leading edge at depth of the Rialp basement thrust sheet and interpreted as linked to a large subsurface accumulation of Triassic evaporites. The volume at depth of the La Maladeta and Arties granites has been constrained through gravity modelling. This work highlights that the combination of structural geology and gravity modelling can help to determine the structural architecture of an orogen and localize accumulations of evaporites at depth. © 2021, The Author(s).
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Dyke or pipe? Contributions of magnetic fabrics to the reconstruction of the geometry of an eroded subvolcanic body (Cadí basin, Pyrenees)

  • Simón-Muzás, A.
  • Casas-Sainz, A.
  • Soto, R.
  • Beamud, E.
  • Gisbert, J.
The reconstruction of the geometry of igneous bodies in inverted basins is often a difficult task, because most of their volume can be either below or above the topographic surface. Indirect methods, such as the determination of their internal fabric can give clues to constrain geometrical reconstructions. The Sant Salvador intrusion, located in the Late Carboniferous-Permian Cadí basin (Central-Eastern Pyrenees), is a good example for testing the application of magnetic fabrics to shallow igneous bodies because of (i) its characteristics in terms of crystal composition/orientation, showing a homogeneous petrofabric controlled by plagioclase crystals 0.4 mm in size, (ii) its good, though partial, preservation, (iii) its position in the stratigraphical succession, between volcaniclastic sediments and unconformably overlying red beds, and (iv) the many unknown factors related to the intrusion, including the geometry of the body and its depth and the amount of erosion after intrusion. Furthermore, the Sant Salvador intrusion provides opportunity for checking the correspondence between the petrofabric and the magnetic fabrics when the magnetic carriers of susceptibility (with an average value of 5217·10−6 SI) are mainly ferromagnetic. In this case the main magnetic carriers are magnetite and also hematite, the latter resulting from oxidation processes at the paleosurface. The results of Anisotropy of Magnetic Susceptibility show a bimodality in the K1 disposition after bedding restitution: vertical in the deeper areas of the intrusion and subhorizontal, E-W, in the uppermost stratigraphic positions with an intermediate necking zone in which transition from vertical to horizontal flow is interpreted to occur. Bands deflecting the mineral foliation at the micro scale have also a tectonic or thermal origin but do not seem to interfere with the magnetic ellipsoid axes. Columnar jointing is interpreted to be parallel to the long axis of the intrusion (and therefore to magma flow, and perpendicular to the paleosurface. All these features indicate that the Sant Salvador intrusion can be interpreted as a subvertical pipe feeding a sill that was eroded before the sedimentation of the overlying red beds.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Applying magnetic techniques to determine the evolution of reactive diapirs: A case study of the Lusitanian basin

  • Calvín, Pablo
  • Oliva-Urcia, Belén
  • Kullberg, José C.
  • Torres-López, Sara
  • Casas-Sainz, Antonio
  • Villalaín, Juan J.
  • Soto, Ruth
The western Iberian margin underwent complex evolution during the Mesozoic and Cenozoic. It was subjected to successive extensional and compressional phases, where salt tectonics played a significant role in both. The role of onshore structures during basin formation and inversion is not fully understood, and different chronological relationships between structures have been proposed. To better understand the history of salt body emplacement, we present paleomagnetic and magnetic fabric data from Jurassic carbonates, comprising cover rocks of the diapiric system. Magnetic fabrics show two types of behavior. Type 1 fabrics show magnetic foliation parallel to bedding—the magnetic lineation, after bedding correction, is horizontal and parallel to the diapiric contacts. This fabric is a consequence of overpressure during salt migration, whose effect is limited to the area near the diapirs. Type 2 fabric is characterized by a magnetic lineation parallel to the strike of bedding and—the intermediate and minimum magnetic axes are dispersed on a vertical girdle parallel to the shortening direction. This is interpreted as a compressional fabric that developed during basin inversion. Paleomagnetic results reveal a stable paleomagnetic component carry by magnetite with characteristic unblocking temperatures (175–450 °C) and coercivities (30–100 mT). Twelve of the 14 calculated mean directions show homogeneous behavior in their magnetic properties and directions, with positive inclinations, northward directions, with synfolding to postfolding behavior. We calculated the remagnetization direction (Dec: 347.5°, Inc.: 51.3°) and compare it to the APWP. It was likely acquired during the Cretaceous Normal Superchron, following the extensional deformation phase and prior to basin inversion. The paleodips (i.e., the bedding at remagnetization times) indicate that tilting occurred mainly during the extensional stage, meaning that the diapirs had already been developed. This indicates a strong Mesozoic salt tectonic component in the present-day structuring of this sector of the Lusitanian basin.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Paleomagnetic study of Late-Carboniferous-Permian rocks from the Cadí Basin (Eastern Pyrenees): Tectonic implications

  • Simón-Muzás, Ana
  • Casas-Sainz, Antonio M.
  • Soto, Ruth
  • Pueyo, Emilio L.
  • Beamud, Elisabet
  • Oliva-Urcia, Belén
We have carried out a detailed paleomagnetic study of volcanic rocks (18 sites) and red beds (10 sites) from the Late-Carboniferous-Permian series of the Cadí Basin (Eastern Pyrenees). The study provides reliable Late Carboniferous-Permian paleomagnetic directions, in an area where paleomagnetic studies are scarce. The main characteristic component in both rock types shows a SSE direction with a shallow inclination and a dominant reverse polarity. The magnetic carriers, both in the volcanic rocks and the red beds, are magnetite and hematite. The main component is interpreted as a primary magnetization of Permian age in the red beds; in the Late Carboniferous volcanic rocks, the main component likely represents primary magnetization or early remagnetization. These results are consistent with the poles for the Iberian plate during the Permian and indicate an absence of regional vertical axis rotations for the Orri nappe, in whose hanging wall the Cadí Basin was transported southwards during the Pyrenean orogeny.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Origin of oblique structures controlled by pre-tectonic thickness variations in frictional and salt-bearing fold-and-thrust belts: Insights from analogue modelling

  • Santolaria, Pablo
  • Izquierdo-Llavall, Esther
  • Soto, Ruth
  • Román-Berdiel, Teresa
  • Casas-Sainz, Antonio
This work includes, first, a synthesis of experimental analogue modelling programs assessing the influence of along-strike thickness variations in the development of oblique structures in fold-and-thrust belts. As a second part, we present a new experimental program testing, systematically, the influence of tapered décollement-cover thrust wedges. Previous experiments show that frictional, brittle models feature numerous, short-wavelength structures where the cover is thinner. Deformation fronts are totally or locally oblique to the backstop when the cover thinning is progressive or sharp, respectively. Low (<30°) or higher structural obliquities occur when thickness variations are progressive or sharp, respectively. The addition of a basal or intermediate décollement, commonly entails the transference of deformation towards its external pinch-out. Consequently salients occur and transfer zones and oblique structures form over décollement boundaries. Their location and orientation strongly depend on the pre-compressional shape of the décollements. Furthermore, as demonstrated by our modelling results, tapered brittle covers over viscous décollements result in asymmetric thrust wedges formed by structures that end or change their vergence laterally, resulting in obliquities generally <30°. Two natural case studies, showing strong (South Pyrenean Central Salient) or moderately oblique (Keping Shan fold-and-thrust belt) structures are revisited and compared to the described analogue models.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Geology of the Late Carboniferous, Permian and Early Triassic basins of the Eastern Pyrenees

  • Gisbert, Josep
  • Simón-Muzás, Ana
  • Casas-Sainz, Antonio
  • Soto, Ruth
We present a detailed geological map of the Upper Carboniferous, Permian and Triassic rocks of the southern border of the Axial Zone in the Eastern Pyrenees. These units were deposited in three intra-mountain, terrestrial basins, characterized by the emplacement/deposition of volcanic, sub-volcanic and volcaniclastic units (ca. 1000 m thick) together with continental red beds. The map is based on unpublished drafts, sketches and structural data. This previous information was complemented with new structural, petrologic and stratigraphic data. The geological map is presented together with three cross-sections, a detailed lithological description, and a stratigraphic correlation panel to help understand the stratigraphy, volcanism and structure and, ultimately, the geometry and origin of the highly subsident areas of this segment of the chain in post-Variscan times. The geological map gives new clues for reconstructing the geometry of these basins and the distribution of the volcanic episodes during the Late Carboniferous and Permian.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Salt distribution in the South Pyrenean Central Salient: Insights from gravity anomalies

  • Santolaria, P.
  • Ayala, C.
  • Soto, R.
  • Clariana, P.
  • Rubio, F. M.
  • Martín-León, J.
  • Pueyo, E. L.
  • Muñoz, J. A.
Triassic evaporites represent the regional décollement of the Pyrenees and form two salt provinces north and south of the South Pyrenean Central Salient (SPCS). We present an updated Bouguer and residual Bouguer anomaly map built upon the homogenization of available gravity data of the SPCS together with four new and representative cross‐sections, constrained by geological data acquired in the field, seismic, well, and gravity data (gravity forward modeling). Gravity anomaly maps and cross‐sections are used to characterize the present‐day uneven distribution of Triassic evaporites. Outcropping Triassic evaporites is not necessarily associated with an underlying evaporite accumulation and the absence of it at surface does not involves its non‐existence at depth. Northwest of the salient, a major accumulation of Triassic evaporites floors a thick syn‐orogenic Upper Cretaceous basin. South of it, Triassic rocks core salt‐detached anticlines related to the Pyrenean orogeny. Along the southernmost (and youngest) thrust sheet of the salient, diapirs, and evaporite accumulations are associated with a salt‐inflated area.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Imprint of paleocurrents, extensional and compressional deformation in the magnetic fabrics of the Permo-Triassic red beds of the Cadí Basin (Eastern Pyrenees)

  • Simón-Muzás, Ana
  • Soto, Ruth
  • Pueyo, Emilio L.
  • Beamud, Elisabet
  • Oliva-Urcia, Belén
  • Casas-Sainz, Antonio M.
A magnetic fabric study was carried out in Permo-Triassic continental sedimentary red beds from the Cadí Basin (Eastern Pyrenees). These rocks were deposited on the top of a volcanic sequence when the regional tectonic regime changed from transtension to extension. Standard paleomagnetic cores (cylinders), cubes and irregular fragments were obtained for this study in 25 sites distributed throughout the basin. The “fragment methodology”, using oriented irregular fragments in claystones, is demonstrated to be successful and replicable. The aims of this study are (i) to interpret the magnetic fabrics in red beds according to sedimentary or tectonic models; (ii) to establish the relationship between the magnetic fabrics in the sedimentary red beds and the magnetic fabrics previously obtained in the underlying volcanic series, and (iii) to compare magnetic fabrics in continental sediments with other basins of the same age to interpret the tectonic scenario in the Iberian plate during Permian and Triassic times. The results obtained reveal a primary magnetic fabric that recorded a syn-sedimentary stretching in two nearly perpendicular directions, WNW-ESE and N-S, linked to basin development. Other sedimentary and tectonic factors, such as paleocurrents and deformation derived from the Alpine compression did not have a significant influence on the development of magnetic fabrics. The geodynamic scenario of the Iberian plate during Late Permian to Triassic times can be explained according to regional trajectories of extensional stress due to the activity of the North-Pyrenean fault zone.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Foliación y fábricas magnéticas asociadas a interferencia de pliegues en la Zona Axial Pirenaica (La Seu d’Urgell, Lleida)

  • Simón Muzás, Ana
  • Casas Sainz, Antonio
  • Soto, Ruth
  • Clariana, Pilar
  • Margalef, Aina
La zona de estudio, en las inmediaciones de La Seu d’Urgell (Zona Axial pirenaica), está constituida por una serie estratigráfica de rocas Cambro-Ordovícicas, en su mayoría detríticas, donde la discordancia Sarda se identifica claramente entre la Serie de Jujols y la Fm. Conglomerados de la Rabassa. Las principales estructuras son pliegues N-S de plano axial subhorizontal que muestran una foliación asociada, bien desarrollada en los niveles pelíticos (y claramente visibles en lámina delgada) y pobremente desarrollada en los niveles de arenisca. En los conglomerados suprayacentes a la discordancia Sarda (Fm. Conglomerados de la Rabassa) la foliación regional se caracteriza por tener sobreimpuestas bandas de cizalla conjugadas que rodean los clastos. Las fábricas magnéticas (principalmente paramagnéticas) son coherentes con las microestructuras observadas a pesar de que la correspondencia entre los ejes de las fábricas magnéticas y los ejes de las estructuras observadas en el campo no es sencilla. El máximo de las direcciones de lineación es bimodal (N-S y E-W), lo cual puede ser interpretado como el resultado de una interferencia de pliegues (tipo 2 de Ramsay).
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Secondary precipitation of Fe–Ti oxides as a source for strongly changing magnetic properties in ancient volcanic rocks (Cadí Basin, Pyrenees)

  • Simón-Muzás, Ana
  • Casas-Sainz, Antonio M.
  • Soto, Ruth
  • Oliva-Urcia, Belén
Abstract Strong changes of magnetic properties (magnetic susceptibility and natural magnetic remanence) affecting large volumes of rocks can be conditioned by a series of factors, including circulation of hydrothermal fluids or meteoric waters, often favored by the primary porosity of the rock or pervasive fracturing. In the Late Carboniferous-Permian Cadí Basin, in the Eastern Pyrenees, there are volcanic rocks that show a unique pattern of magnetic anomalies up to 200 nT in amplitude revealing a heterogeneous distribution of their magnetic properties. To unravel the origin of these anomalies, we performed a detailed study of the magnetic properties of the volcanic and volcaniclastic rocks, combined with magnetic surveying and analysis of brittle structures. The results indicate that the origin of the strong variations in the magnetic properties is linked to: (i) lithological changes within the volcanic series, and (ii) the inhomogeneous secondary precipitation of ferromagnetic minerals. As a result of these secondary processes, magnetic fabrics do not reliably record either the volcanic paleoflow or the deformation imprint. The mineralogical composition can be interpreted as the result of a strong hydrothermal alteration that took place during early diagenetic stages, which was also responsible for the neoformation of magnetite crystals with variable titanium content. Random fluid circulation during the Late-Variscan stage could be the origin of these strong variations in magnetic properties. Graphical Abstract
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Interplay of caldera and tectonic subsidence in an inverted Late Carboniferous–Permian basin (Central Pyrenees)

  • Simón-Muzás, Ana
  • Soto, Ruth
  • García-Lasanta, Cristina
  • Housen, Bernard
  • Gisbert, Josep
  • Casas-Sainz, Antonio
Deposits of thick volcanic and volcaniclastic series can be interpreted as either related to regional tectonics (commonly extensional or transtensional tectonics) or local volcanic mechanisms (caldera collapse). In order to distinguish between these two end-member mechanisms, we propose the use of magnetic techniques, namely analysis of Anisotropy of Magnetic Susceptibility (AMS) and paleomagnetism, and analysis of geological structures. These techniques have been applied to the Estac Basin (Central Pyrenees), an inverted Late Carboniferous–Permian basin now involved in the antiformal stack of the Pyrenean belt. AMS data provide directions of flow of volcanic rocks that can be interpreted in terms of palaeo-slopes and therefore can be related to structures contemporary with deposition and Late Carboniferous–Permian volcanic activity. The maximum of the magnetic lineation (i.e. volcanic paleoflow) direction is bimodal, with (i) an absolute maximum (as occurring in most South-Pyrenean Late Carboniferous–Permian basins) along a WNW–ESE direction and (ii) a secondary magnetic lineation along an N–S direction. Paleomagnetic data obtained from the volcanic products show a primary magnetization or early remagnetization compatible with the Late Carboniferous–Permian paleomagnetic reference direction and allow us to reconstruct an early folding probably related to the warping of the basin. The magnetic and structural data can be interpreted according to a volcano-tectonic subsidence model in which E–W faults played a major role and caldera collapse contributed to the important thickness of the volcaniclastic deposits.