Pasar al contenido principal

EVOLUCION MESOZOICA DEL TETHYS OCCIDENTAL A PARTIR DE FABRICAS MAGNETICAS: RELACION CON LA ROTACION DE IBERIA

PID2019-108753GB-C22

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2019
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE ZARAGOZA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 46
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Axial longitudinal flow in volcanic materials of the Late Carboniferous-Permian Cadí basin (Southern Pyrenees) determined from anisotropy of magnetic susceptibility

  • Simón-Muzás, Ana
  • Casas-Sainz, Antonio M.
  • Soto, Ruth
  • Gisbert, Josep
  • Román-Berdiel, T.
  • Oliva-Urcia, Belén
  • Pueyo Morer, Emilio Luis
  • Beamud, Elisabet
The aim of this work is the application of the anisotropy of magnetic susceptibility (AMS) to the study of volcanic materials from the Late Carboniferous-Permian Cadí basin (southern Pyrenees) in order to (i) explore the limits of this technique in ancient volcanic materials that have undergone strong chemical alteration and a complex tectonic evolution and (ii) provide new insights on the deposition of volcanic materials in this tectonically controlled sedimentary basin. To establish a comparison with the petrofabric of rocks, AMS was complemented with observations and orientation analyses at the outcrop scale, in oriented polished blocks and in thin sections under the microscope. High resolution sampling (620 specimens from 56 sites located in five transects along a sequence 150 m thick) allowed to characterize the volcaniclastic and lava flow series. The AMS results show a fairly constant average magnetic lineation oriented WNW-ESE (in situ and tilt-corrected) and two secondary maxima (N-S to NE-SW in some areas). The magnetic mineralogy analyses indicate the contribution of paramagnetic and ferromagnetic (magnetite, Tc 580 °C) phases to susceptibility. The magnetic fabric has a close relationship with the spatial distribution and orientation of the mineral and grain components of the studied rocks, mainly controlled by depositional processes, with a negligible contribution of the tectonic imprint. Therefore, the magnetic lineation (i.e. K1 axes) can be reliably used as a paleoflow indicator. Nevertheless, it was not possible to establish a clear correspondence between lithological and magnetic fabric types. The results obtained indicate that the AMS approach represents a powerful tool to infer the paleoflow pattern in ancient volcanic and volcaniclastic rocks, even under a priori unfavourable conditions., This work was supported by projects grants CGL2017-84901-C2-2-P, PID2020-114273GB-C22, PID2019-108753GB-C22 and FPU19/02353 funded by MCIN/AEI/10.13039/501100011033, “ERDF A way of making Europe” and “ESF Investing in your future”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Tectonic Evolution of the Moroccan High Atlas: a Paleomagnetic Perspective : Magnetic Techniques (Anisotropy of Magnetic Susceptibility and Paleomagnetism) Applied to the Understanding of the Evolution of an Intra-Plate Mountain Chain

  • Calvín, P.
  • Casas-Sainz, Antonio M.
  • Román-Berdiel, T.
  • Villalaín, Juan J.
XXII, 646 p., [EN] This book presents a significant amount of structural, paleomagnetic and magnetic fabric data in the Central High Atlas (Morocco). The authors thoroughly described and analyzed the present-day structure of this intraplate chain through 22 of cross-sections, potential field data analysis and 3D reconstruction. In addition, the authors propose a palinspastic reconstruction of the structure of the basin at 100 Ma (i.e., post-extension and pre-compression) to finally evaluate its Mesozoic and Cenozoic geodynamic evolution. This books presents (1) a unique three-dimensional model at the chain scale, (2) an analysis of the ca. 100 Ma remagnetization, to perform palinspastic restorations of most representative structures, (3) as well as the interpretation of the magnetic fabrics in order to unravel the tectonic or deformation setting that the rocks underwent in different parts of the basin. This book is of interest to structural geologists in Northern Africa, the Mediterranean and Iberia, as well as to those interested in inverted intraplate basins and paleomagnetists from around the planet. Also, this book is intended to help students to understand better the geological evolution of the Atlas and therefore Morocco and surrounding areas., This work is part of the I+D+i research projects CGL2009-10840, CGL2009-8969, CGL2012-38481, CGL2016-77560-C2 (C21 and C22) and PID2019-108753GB-C2 (C21 and C22), funded by MICIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”. Sara Torres acknowledges funding from BES-2010-029970 contract (AEI-Spain). Pablo Calvín acknowledges funding from BES-2013-062988 and PTA2017-14779-I contracts (AEI-Spain)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Structure of the Central High Atlas (Morocco): constraints from Potential Field Data and 3D Models

  • Casas-Sainz, Antonio M.
  • Santolaria, Pablo
  • Mochales López, Tania
  • Pocoví Juan, Andrés
  • Izquierdo Llavall, Esther
  • El-Ouardi, Hmidou
  • Moussaid, B.
  • Manar, Ahmed
  • Ruiz-Martínez, V.C.
  • Marcén Albero, Marcos
  • Torres-López, S.
  • Gil Imaz, Andrés
  • Román-Berdiel, T.
  • Oliva-Urcia, Belén
  • Calvín, P.
[EN] From a 3-D reconstruction based on serial cross-sections, structural observations, and potential field geophysical data we characterize the major structural frame of the Moroccan Central High Atlas. Its overall structure shows two fold-and-thrust systems (each one showing particular features) at the northern and southern borders of the chain, resulting from the inversion of the Mesozoic basin. Five more zones can be distinguished in the inner part of the chain, according to their structural features, ranging from basement-involved structures in the westernmost sector to completely detached structures in the eastern part. Most compressional structures show an ENE-WSW (atlasic) trend, also pinpointed by the orientation of pressure-solution and slaty cleavage associated with the compressional stage. Large-scale faults of crustal or lithospheric reach can be inferred from the aeromagnetic maps, that show that the gabbro intrusions (some of them showing sigmoidal shape) are aligned in an E-W direction, oblique to the main trend. The overall compressional structure is controlled by a main, low-angle, South-verging thrust involving both the Mesozoic cover and the Paleozoic basement thrusting over the southern foreland of the chain. Branching on this surface there is a series of back-thrusts and faults, some of them resulting from re-activation of extensional structures., This research was financed by projects CGL2016-77560-C2 (C21 and C22) and PID2019-108753GB-C2 (C21 and C22), funded by MICIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Magnetic Properties of the Jurassic Sedimentary Rocks of the Central High Atlas Affected by a Regional Chemical Remagnetization

  • Calvín, P.
  • Bógalo, María Felicidad
  • Villalaín, Juan J.
  • Román-Berdiel, T.
  • Falcón, Irene
  • Torres-López, S.
  • Mochales López, Tania
  • Herrejón, A.
This chapter presents the results of numerous rock experiments carried out on Jurassic marine carbonates and red beds from the Central High Atlas, which have been affected by a regional remagnetization related to burial. As in other sedimentary rocks affected by chemical remagnetizations, the analyzed samples show a characteristic magnetic fingerprint. The dominant magnetic mineralogy of carbonates is composed of non-interacting uniaxial magnetite, in the superparamagnetic (SP) and stable single domain (SSD) states. Besides, a variable contribution of pyrrhotite is present in most of the samples. The combined presence of neoformed magnetite and pyrrhotite seems to be indicative that these rocks have reached temperatures around 200–250 °C, compatible with previous studies of illite crystallinity. ARM and IRM unmixing curves define a very characteristic pattern for remagnetized carbonates differentiated from other rocks types bearing magnetite. On the other hand, the high temperature susceptibility curves used to characterize the magnetic anisotropy studies show different contribution of paramagnetic and ferromagnetic (s.l.) minerals. Among paramagnetic phases, it is expected the presence of phyllosilicates and pyrite that can be the precursors of the neoformation of magnetite and pyrrhotite both during burial in natural conditions and in the different performed experiments. With regard to the ferromagnetic (s.l.) fractions, magnetite is the dominant phase with a minor contribution of pyrrhotite. In red beds, rock magnetic experiments show a dominance of hematite with different contribution of magnetite. In general, the susceptibility curves show a dominance of paramagnetic signal to the bulk susceptibility., This work is part of the I+D+i research projects CGL2016-77560-C2 (C21 and C22) and PID2019-108753GB-C2 (C21 and C22), funded by MICIN/AEI/https://doi.org/10.13039/501100011033 and by “ERDF A way of making Europe”. Pablo Calvín acknowledges funding from PTA2017-14779-I and FJC2019-041058-I (AEI-Spain) contracts. I. Falcón acknowledges the contract UBU-19-B (Personal Técnico de Apoyo a la Investigación) from the Junta de Castilla y León. S. Torres acknowledges the founding from BES-2010-029970 (MICINN) contract and program of grants Margarita Salas., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Paleomagnetism of the Central High Atlas: the Widespread Cretaceous Remagnetization and Structural Implications

  • Villalaín, Juan J.
  • Calvín, P.
  • Falcón, Irene
  • Torres-López, S.
  • Bógalo, María Felicidad
  • Moussaid, B.
  • Ruiz-Martínez, V.C.
  • Sánchez Moreno, E.M.
Previous works developed by our research group have shown that the Jurassic rocks of the Central high Atlas (CHA) have recorded a Cretaceous widespread remagnetization. In this chapter, a high resolution paleomagnetic study on 424 new paleomagnetic sites in Mesozoic units of CHA is presented. This work provides new information about the Cretaceous magnetic overprint of the CHA, as well as contributes to the knowledge of the geodynamic evolution of the Atlas. The new results confirm the extent of remagnetization throughout the study area (10,000 km2) in both carbonates (carried by magnetite) and red beds (carried by hematite) showing systematically normal polarity and an inter-folding acquisition. By using small circle techniques, the remagnetization direction (n = 531, Dec = 335.4°, Inc = 42.7° for carbonates and n = 62, Dec = 344.4°, Inc = 41.7° for red beds) and the age of acquisition (100 Ma ± 5 Ma for limestones) have been determined. The remagnetization properties in the carbonates and their paleomagnetic direction are maintained throughout the studied area and the different stratigraphic units. The small but statistically significant difference between the directions of remagnetization in carbonates and red beds suggests a delay in the acquisition in red beds. Remagnetization directions have been restored using small circle techniques, allowing to generate a set of 593 paleo-dips of the beds at 100 Ma. This valuable information has been used in Chap. “ Kinematics of Structures and Basin Evolution in the Central High Atlas. Constraints from AMS and Paleomagnetic Data ” to elaborate palinspastic reconstructions and to study the evolution of the different structures of the CHA. For this purpose, a new diagram (paleo-dip evolution diagram, PED) is here proposed., This work was financed by research projects CGL2009-10840 (MICIN), CGL2012-38481 (MINECO), CGL2016-77560-C2 (MINECO) and PID2019-108753GB-C2 funded by MICIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”. P. Calvín acknowledges funding from PTA2017-14779-I and FJC2019- 041058-I (AEI-Spain) contracts. I. Falcón acknowledges the contract UBU-19-B (Personal Técnico de Apoyo a la Investigación) from the Junta de Castilla y León. S. Torres acknowledges the founding from BES-2010-029970 (MICINN) contract and program of grants Margarita Salas. E. M. Sánchez acknowledges the post-doctoral grant FCT (Portugal) CEECIND/04004/2018 and program of grants María Zambrano., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Geodynamic Evolution During the Mesozoic and Cenozoic in the Central High Atlas of Morocco from Anisotropy of Magnetic Susceptibility

  • Román-Berdiel, T.
  • Oliva-Urcia, Belén
  • Casas-Sainz, Antonio M.
  • Calvín, P.
  • Moussaid, B.
  • Soto, Ruth
  • Marcén Albero, Marcos
  • El-Ouardi, Hmidou
  • Pocoví Juan, Andrés
  • Gil Imaz, Andrés
Material suplementario en https://static-content.springer.com/esm/chp%3A10.1007%2F978-3-031-16693-8_5/MediaObjects/535914_1_En_5_MOESM1_ESM.zip y en https://static-content.springer.com/esm/chp%3A10.1007%2F978-3-031-16693-8_5/MediaObjects/535914_1_En_5_MOESM2_ESM.zip, [EN] The anisotropy of magnetic susceptibility provides valuable information on the imprint of the different tectonic processes occurred in the Central High Atlas (CHA), complementing the structural analysis and paleomagnetic information. Different types of magnetic ellipsoids, related with extensional, diapiric or intrusive processes occurred during the Mesozoic, or with the Cenozoic compression, can be recognized. The predominance of one or another type of fabric varies spatially, and a transition can be observed from bedding-related fabrics in Western and Eastern sectors, to more abundant, modified magnetic fabrics in the Central sectors and in the Southern border of the CHA. Extensional fabrics are characterized by the orientation of the kmin axes normal to bedding and the kmax axes clustered in a NW–SE direction within the bedding plane. This direction represents the regional (and local) extension, perpendicular to the main faults. Compressional magnetic fabrics show their kmin axes in NW–SE or N-S directions and/or kmax axes sub-horizontal and clustered in the NE-SW direction, consistently with the shortening direction inferred from the trend of compressional structures (folds and thrusts). Compressional tectonic fabrics are unequivocally interpreted in areas showing regional cleavage. Magnetic lineations vertical or close to the bedding dip direction are found near thrust planes or near the core of narrow and tight anticlines and are related to transport direction or re-tightening of structures, in many cases nucleated in relation to salt tectonics features., This work is part of the I+D+i research projects CGL2016-77560-C2 (C21 and C22) and PID2019-108753GB-C2 (C21 and C22), funded by MICIN/AEI/https://doi.org/10.13039/501100011033 and by “ERDF A way of making Europe”. Pablo Calvín acknowledges funding from PTA2017-14779-I and FJC2019-041058-I (AEI-Spain) contracts., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Kinematics of Structures and Basin Evolution in the Central High Atlas: constraints from AMS and Paleomagnetic Data

  • Casas-Sainz, Antonio M.
  • Villalaín, Juan J.
  • Román-Berdiel, T.
  • Calvín, P.
  • Marcén Albero, Marcos
  • Izquierdo Llavall, Esther
  • Santolaria, Pablo
  • Pocoví Juan, Andrés
  • Mochales López, Tania
  • Oliva-Urcia, Belén
  • El-Ouardi, Hmidou
  • Moussaid, B.
[EN] From the application of the magnetic techniques (Anisotropy of Magnetic Susceptibility and paleomagnetism) it can be seen that to determine the age (and origin) of structures in the Moroccan Central High Atlas is not straightforward from geometrical features only and that similar structures can have different origins, or that the two limbs of a particular structure can have developed at different times. A classification of structures is proposed showing all these possibilities. As a general rule, many structures were initiated before compression and, with local exceptions associated with salt structures, paleo-dips were shallow at the remagnetization stage. This has allowed the restoration of structures and the characterization of the overall geometry of the atlasic basin as a narrow, steer’s head strongly subsiding basin whose geometry strongly conditioned its tectonic inversion during the Cenozoic compressional stage. As a synthesis, the Central High Atlas constitutes a good example of intra-plate chain in which different models of basin formation (continental rifting, salt tectonics, transtension) and inversion (thrust tectonics, transpression, buttressing and internal deformation…) can be tested and visualized., This work is part of the I+D+i research projects CGL2009-10840, CGL2009-8969, CGL2012-38481, CGL2016-77560-C2 (C21 and C22) and PID2019-108753GB-C2 (C21 and C22), funded by mICIN/AEI/https://doi.org/10.13039/501100011033 and by “ERDF A way of making Europe”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Dyke or pipe? Contributions of magnetic fabrics to the reconstruction of the geometry of an eroded subvolcanic body (Cadí basin, Pyrenees)

  • Simón-Muzás, Ana
  • Casas-Sainz, Antonio M.
  • Soto, Ruth
  • Beamud, Elisabet
  • Gisbert, Josep
The reconstruction of the geometry of igneous bodies in inverted basins is often a difficult task, because most of their volume can be either below or above the topographic surface. Indirect methods, such as the determination of their internal fabric can give clues to constrain geometrical reconstructions. The Sant Salvador intrusion, located in the Late Carboniferous-Permian Cadí basin (Central-Eastern Pyrenees), is a good example for testing the application of magnetic fabrics to shallow igneous bodies because of (i) its characteristics in terms of crystal composition/orientation, showing a homogeneous petrofabric controlled by plagioclase crystals 0.4 mm in size, (ii) its good, though partial, preservation, (iii) its position in the stratigraphical succession, between volcaniclastic sediments and unconformably overlying red beds, and (iv) the many unknown factors related to the intrusion, including the geometry of the body and its depth and the amount of erosion after intrusion. Furthermore, the Sant Salvador intrusion provides opportunity for checking the correspondence between the petrofabric and the magnetic fabrics when the magnetic carriers of susceptibility (with an average value of 5217·10 SI) are mainly ferromagnetic. In this case the main magnetic carriers are magnetite and also hematite, the latter resulting from oxidation processes at the paleosurface. The results of Anisotropy of Magnetic Susceptibility show a bimodality in the K disposition after bedding restitution: vertical in the deeper areas of the intrusion and subhorizontal, E-W, in the uppermost stratigraphic positions with an intermediate necking zone in which transition from vertical to horizontal flow is interpreted to occur. Bands deflecting the mineral foliation at the micro scale have also a tectonic or thermal origin but do not seem to interfere with the magnetic ellipsoid axes. Columnar jointing is interpreted to be parallel to the long axis of the intrusion (and therefore to magma flow, and perpendicular to the paleosurface. All these features indicate that the Sant Salvador intrusion can be interpreted as a subvertical pipe feeding a sill that was eroded before the sedimentation of the overlying red beds., This work was supported by projects grants PID2020-114273 GB-C22, PID2019-108753 GB-C22 and FPU19/02353 funded by MCIN/AEI/10.13039/501100011033, “ERDF Away of making Europe” and “ESF Investing in your future”. EB thanks the Geomodels Research Institute (UB) and GGAC 2021 SGR00076 (AGAUR)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Paleomagnetic study of Late-Carboniferous-Permian rocks from the Cadí Basin (Eastern Pyrenees): Tectonic implications

  • Simón-Muzás, Ana
  • Casas-Sainz, Antonio M.
  • Soto, Ruth
  • Pueyo Morer, Emilio Luis
  • Beamud, Elisabet
  • Oliva-Urcia, Belén
We have carried out a detailed paleomagnetic study of volcanic rocks (18 sites) and red beds (10 sites) from the Late-Carboniferous-Permian series of the Cadí Basin (Eastern Pyrenees). The study provides reliable Late Carboniferous-Permian paleomagnetic directions, in an area where paleomagnetic studies are scarce. The main characteristic component in both rock types shows a SSE direction with a shallow inclination and a dominant reverse polarity. The magnetic carriers, both in the volcanic rocks and the red beds, are magnetite and hematite. The main component is interpreted as a primary magnetization of Permian age in the red beds; in the Late Carboniferous volcanic rocks, the main component likely represents primary magnetization or early remagnetization. These results are consistent with the poles for the Iberian plate during the Permian and indicate an absence of regional vertical axis rotations for the Orri nappe, in whose hanging wall the Cadí Basin was transported southwards during the Pyrenean orogeny., This work was supported by projects grants PID2020-114273GB-C22, PID2019-108753GB-C22, and PID2019-104693GB-I00 funded by MCIN/AEI/10.13039/501100011033, “ERDF Away of making Europe” and grant FPU19/02353 funded by MCIN/AEI/10.13039/501100011033, “ERDF Away of making Europe” and funded by “ESF Investing in your future”. This study represents a contribution from the GeoAp (E01-20R) and the GeoTransfer (E32-20R) Research Groups (Aragón Government). EB thanks the Geomodels Research Institute and AGAUR 2021SGR00076., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Magnetic fabrics in sedimentary Permian red beds in the Cadí basin (Southern Pyrenees), Fábricas magnéticas en rocas sedimentarias del Pérmico de la cuenca del Cadí (Pirineos Orientales)

  • Simón-Muzás, Ana
  • Casas-Sainz, Antonio M.
  • Soto, Ruth
  • Pueyo Morer, Emilio Luis
  • Beamud, Elisabet
  • Gisbert, Josep
  • Oliva-Urcia, Belén
In the Cadí basin (southern Pyrenees) a magnetic fabrics study has been carried out in detrital continental sediments from the Permian Lower Red and Upper Red Units (20 sites) in red siltstones, shales and medium-coarse grain sandstones, obtaining cylinders and oriented fragments. The magnetic foliation is parallel to the bedding plane. The maximum susceptibility axis, K1, is arranged in two subhorizontal maxima after tectonic correction: 1) with N-S direction and 2) with E-W direction. The palaeocurrents are arranged from an E-W to a WNW-ESE direction, thus indicating both sedimentary and tectonic conditionings., Se ha llevado a cabo en la cuenca del Cadí (Pirineos Orientales) un estudio de fábricas magnéticas en los sedimentos detríticos continentales de las unidades pérmicas Roja Inferior y Roja Superior (20 estaciones) en limolitas, lutitas y areniscas de grano medio-grueso extrayendo cilindros y fragmentos orientados. La foliación magnética es paralela al plano de estratificación. El eje de máxima susceptibilidad K1 se dispone en dos máximos subhorizontales tras la corrección tectónica: 1) con dirección N-S y 2) con dirección E-W. Las paleocorrientes se disponen en un abanico desde el E-W hasta el WNW-ESE. Se interpreta que las direcciones de la lineación magnética podrían estar condicionadas tanto por la sedimentación como por la tectónica., El presente trabajo ha sido financiado por los proyectos y ayudas a la investigación PID2020-114273GB-C22, PID2019-108753GB-C22, FPU19/02353, y MCIN/AEI/10.13039/501100011033, “ERDF Away of making Europe” y “ESF Investing in your future”. EB agradece a GGAC 2021 SGR00076 (AGAUR) y el Institut de Recerca Geomodels UB., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Paleomagnetic study of Late-Carboniferous-Permian rocks from the Cadí Basin (Eastern Pyrenees): Tectonic implications

  • Simón-Muzás, Ana
  • Casas-Sainz, Antonio M.
  • Soto, Ruth
  • Pueyo Morer, Emilio Luis
  • Beamud, Elisabet
  • Oliva-Urcia, Belén
[EN] We have carried out a detailed paleomagnetic study of volcanic rocks (18 sites) and red beds (10 sites) from the Late-Carboniferous-Permian series of the Cadí Basin (Eastern Pyrenees). The study provides reliable Late Carboniferous-Permian paleomagnetic directions, in an area where paleomagnetic studies are scarce. The main characteristic component in both rock types shows a SSE direction with a shallow inclination and a dominant reverse polarity. The magnetic carriers, both in the volcanic rocks and the red beds, are magnetite and hematite. The main component is interpreted as a primary magnetization of Permian age in the red beds; in the Late Carboniferous volcanic rocks, the main component likely represents primary magnetization or early remagnetization. These results are consistent with the poles for the Iberian plate during the Permian and indicate an absence of regional vertical axis rotations for the Orri nappe, in whose hanging wall the Cadí Basin was transported southwards during the Pyrenean orogeny., This work was supported by projects grants PID2020-114273GB-C22, PID2019-108753GB-C22, and PID2019-104693GB-I00 funded by MCIN/AEI/10.13039/501100011033, “ERDF Away of making Europe” and grant FPU19/02353 funded by MCIN/AEI/10.13039/501100011033, “ERDF Away of making Europe” and funded by “ESF Investing in your future”. This study represents a contribution from the GeoAp (E01-20R) and the GeoTransfer (E32-20R) Research Groups (Aragón Government). EB thanks the Geomodels Research Institute and AGAUR 2021SGR00076., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Applying magnetic techniques to determine the evolution of reactive diapirs: A case study of the Lusitanian basin

  • Calvín, P.
  • Oliva-Urcia, Belén
  • Kullberg, J. C.
  • Torres-López, S.
  • Casas-Sainz, Antonio M.
  • Villalaín, Juan J.
  • Soto, Ruth
[EN] The western Iberian margin underwent complex evolution during the Mesozoic and Cenozoic. It was subjected to successive extensional and compressional phases, where salt tectonics played a significant role in both. The role of onshore structures during basin formation and inversion is not fully understood, and different chronological relationships between structures have been proposed. To better understand the history of salt body emplacement, we present paleomagnetic and magnetic fabric data from Jurassic carbonates, comprising cover rocks of the diapiric system. Magnetic fabrics show two types of behavior. Type 1 fabrics show magnetic foliation parallel to bedding—the magnetic lineation, after bedding correction, is horizontal and parallel to the diapiric contacts. This fabric is a consequence of overpressure during salt migration, whose effect is limited to the area near the diapirs. Type 2 fabric is characterized by a magnetic lineation parallel to the strike of bedding and—the intermediate and minimum magnetic axes are dispersed on a vertical girdle parallel to the shortening direction. This is interpreted as a compressional fabric that developed during basin inversion. Paleomagnetic results reveal a stable paleomagnetic component carry by magnetite with characteristic unblocking temperatures (175–450 °C) and coercivities (30–100 mT). Twelve of the 14 calculated mean directions show homogeneous behavior in their magnetic properties and directions, with positive inclinations, northward directions, with synfolding to postfolding behavior. We calculated the remagnetization direction (Dec: 347.5°, Inc.: 51.3°) and compare it to the APWP. It was likely acquired during the Cretaceous Normal Superchron, following the extensional deformation phase and prior to basin inversion. The paleodips (i.e., the bedding at remagnetization times) indicate that tilting occurred mainly during the extensional stage, meaning that the diapirs had already been developed. This indicates a strong Mesozoic salt tectonic component in the present-day structuring of this sector of the Lusitanian basin., This work was supported by projects PID2020-114273GB-C22 funded by MCIN/AEI/10.13039/501100011033, PID2019-108753GB-C22 of the Spanish Government (Ministerio de Ciencia e Innovación) and “Severo Ochoa” extraordinary grants for excellence IGME-CSIC (AECEX2021). Pablo Calvín acknowledges funding from PTA2017-14779-I and FJC2019-041058-I (Ministerio de Ciencia e Innovación, Spain) contracts., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Geology of the Late Carboniferous, Permian and Early Triassic basins of the Eastern Pyrenees

  • Gisbert, Josep
  • Simón-Muzás, Ana
  • Casas-Sainz, Antonio M.
  • Soto, Ruth
[EN] We present a detailed geological map of the Upper Carboniferous, Permian and Triassic rocks of the southern border of the Axial Zone in the Eastern Pyrenees. These units were deposited in three intra-mountain, terrestrial basins, characterized by the emplacement/deposition of volcanic, sub-volcanic and volcaniclastic units (ca. 1000 m thick) together with continental red beds. The map is based on unpublished drafts, sketches and structural data. This previous information was complemented with new structural, petrologic and stratigraphic data. The geological map is presented together with three cross-sections, a detailed lithological description, and a stratigraphic correlation panel to help understand the stratigraphy, volcanism and structure and, ultimately, the geometry and origin of the highly subsident areas of this segment of the chain in post-Variscan times. The geological map gives new clues for reconstructing the geometry of these basins and the distribution of the volcanic episodes during the Late Carboniferous and Permian., The authors thank the financial support from the projects grants PID2020-114273GB-C22, PID2019-108753GB-C22 and FPU19/02353 funded by MCIN/ AEI/10.13039/501100011033, ‘ERDF Away of making Europe’ and ‘ESF Investing in your future’., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Origin of oblique structures controlled by pre-tectonic thickness variations in frictional and salt-bearing fold-and-thrust belts: Insights from analogue modelling

  • Santolaria, Pablo
  • Izquierdo Llavall, Esther
  • Soto, Ruth
  • Román-Berdiel, T.
  • Casas-Sainz, Antonio M.
[EN] This work includes, first, a synthesis of experimental analogue modelling programs assessing the influence of along-strike thickness variations in the development of oblique structures in fold-and-thrust belts. As a second part, we present a new experimental program testing, systematically, the influence of tapered décollement-cover thrust wedges. Previous experiments show that frictional, brittle models feature numerous, short-wavelength structures where the cover is thinner. Deformation fronts are totally or locally oblique to the backstop when the cover thinning is progressive or sharp, respectively. Low (<30°) or higher structural obliquities occur when thickness variations are progressive or sharp, respectively. The addition of a basal or intermediate décollement, commonly entails the transference of deformation towards its external pinch-out. Consequently salients occur and transfer zones and oblique structures form over décollement boundaries. Their location and orientation strongly depend on the pre-compressional shape of the décollements. Furthermore, as demonstrated by our modelling results, tapered brittle covers over viscous décollements result in asymmetric thrust wedges formed by structures that end or change their vergence laterally, resulting in obliquities generally <30°. Two natural case studies, showing strong (South Pyrenean Central Salient) or moderately oblique (Keping Shan fold-and-thrust belt) structures are revisited and compared to the described analogue models., This work is part of the I+D+i research projects CGL2016-77560-C2, PID2019-108753 GB-C2 and PID2020-114273 GB-C22 funded by MICIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Imprint of paleocurrents, extensional and compressional deformation in the magnetic fabrics of the Permo-Triassic red beds of the Cadí Basin (Eastern Pyrenees)

  • Simón Muzás, Ana
  • Soto, Ruth
  • Pueyo Morer, Emilio Luis
  • Beamud, Elisabet
  • Oliva-Urcia, Belén
  • Casas Sainz, Antonio
A magnetic fabric study was carried out in Permo-Triassic continental sedimentary red beds from the Cadí Basin (Eastern Pyrenees). These rocks were deposited on the top of a volcanic sequence when the regional tectonic regime changed from transtension to extension. Standard paleomagnetic cores (cylinders), cubes and irregular fragments were obtained for this study in 25 sites distributed throughout the basin. The ¿fragment methodology¿, using oriented irregular fragments in claystones, is demonstrated to be successful and replicable. The aims of this study are (i) to interpret the magnetic fabrics in red beds according to sedimentary or tectonic models; (ii) to establish the relationship between the magnetic fabrics in the sedimentary red beds and the magnetic fabrics previously obtained in the underlying volcanic series, and (iii) to compare magnetic fabrics in continental sediments with other basins of the same age to interpret the tectonic scenario in the Iberian plate during Permian and Triassic times. The results obtained reveal a primary magnetic fabric that recorded a syn-sedimentary stretching in two nearly perpendicular directions, WNW-ESE and N-S, linked to basin development. Other sedimentary and tectonic factors, such as paleocurrents and deformation derived from the Alpine compression did not have a significant influence on the development of magnetic fabrics. The geodynamic scenario of the Iberian plate during Late Permian to Triassic times can be explained according to regional trajectories of extensional stress due to the activity of the North-Pyrenean fault zone., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. Funding from this work comes from projects grants PID2020-114273 GB-C22, PID2019-108753 GB-C22 and FPU19/02353 funded by MCIN/ AEI/10.13039/501100011033, “ERDF A way of making Europe” and “ESF Investing in your future”.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Paleogeographic imprint of a piggy-back basin rotation: the Ainsa Basin (South-central Pyrenees), Huella paleogeográfica de la rotación de una cuenca piggy-back: la Cuenca de Aínsa (vertiente sur del Pirineo central)

  • Barnolas Cortina, Antonio
  • Mochales López, Tania
Comunicación presentada en la LXXVII Sesión Científica / SGE, Boltaña, 29 de noviembre de 2024., [EN] Sedimentary geometries and paleocurrent distribution from the Ainsa basin support the paleomagnetic data about its rotation and chronology. The Ypresian foreland platform margin, folded in the Boltaña anticline, predates thrusting and related piggyback basin transport. An early Lutetian initiation for the thrust–fold of the Boltaña – Balces system is consistent with the onlap geometries on the east limb of the Boltaña anticline. In the mid Lutetian, growth strata followed by an angular unconformity in the carbonate west limb of the Balces anticline postdates the fault-propagation folding in the Boltaña-Balces system. The forced deltaic progradation that filled the Ainsa basin following the syncline geometry during the mid to late Lutetian (Sobrarbe Fm) track this mid-Lutetian unconformity. The Campodarbe Group, including the Escanilla Fm (Bartonian – middle Priabonian), is connected to the hinterland tectonic uplifting by the Gavarnie thrust with a new palaeogeography and basin configuration. Sedimentary data reinforce a post-Lutetian (Bartonian – middle Priabonian) main event of rotation., [ES] La geometría sedimentaria y distribución de paleocorrientes en la Cuenca de Aínsa, son coherentes con los datos paleomagnéticos de la rotación y su cronología. El margen de la plataforma de antepaís Ypresiense, plegado por el anticlinal de Boltaña, es anterior al cabal-gamiento y emplazamiento de la cuenca piggyback asociada. Un ini-cio del cabalgamiento y pliegues asociados del sistema Boltaña-Balces para el Luteciense inferior, es coherente con la geometría en onlap en el flanco oriental del anticlinal de Boltaña. La discordancia progresiva y angular de las calizas del Luteciense medio del flanco occidental del anticlinal del Balces postdata el sistema de pliegues de propagación de falla de Boltaña-Balces. La progradación deltaica forzada del Lu-teciense medio y superior que rellena la cuenca de Ainsa siguiendo la geometría del sinclinal es posterior a la discordancia del Luteciense medio. El Grupo Campodarbe, incluida la Fm Escanilla (Bartoniense - Priaboniense medio) está relacionado con el levantamiento tectónico del margen activo por el cabalgamiento de Gavarnie, con una nueva configuración paleogeográfica de la cuenca. La información sedimen-taria apoya una edad post-Luteciense (Bartoniense– Priaboniense medio) para el evento principal de rotación., The original data acquisition was sponsored by a PhD IGME fellowship (T. Mochales), a 2015 Research Grant from the Sobrarbe Geopark (GEO/3.2.1.3), and financial support of CGL-2006-2289-BTE MEC and CGL2008-00809/BTE MICINN research projects. This work is supported by projects PID2020-114273GB-C22 and PID2019-108753GB-C22.The contribution of A. Barno-las to this work is supported by PID2021-122467NB-C21 and PID2021-123917OB-I00 Projects (Agencia Estatal de Investigación)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Paleomagnetic and magnetic data of the Lusitanian basin

  • Calvín, P.
  • Oliva-Urcia, Belén
  • Kullberg, Jose
  • Torres-López, S.
  • Casas-Sainz, Antonio M.
  • Villalaín, Juan J.
  • Soto, Ruth
Paleomagnetic and magnetic fabrics (AMS) from 45 sites of Mesozoic rocks of the Lusitanian basin, as well as waypoints of the sites. Associated to the article Calvín, P., Oliva-Urcia, B., Kullberg, J. C., Torres-López, S., Casas-Sainz, A., Villalaín, J. J., & Soto, R. (2023). Applying magnetic techniques to determine the evolution of reactive diapirs: A case study of the Lusitanian basin. Tectonophysics, 868, 230088. https://doi.org/10.1016/j.tecto.2023.230088, Ministerio de Ciencia, Innovación y Universidades FJC2019-041058-I Ministerio de Ciencia, Innovación y Universidades PID2019-108753GB-C22 Ministerio de Ciencia, Innovación y Universidades PID2020-114273GB-C22 Ministerio de Ciencia, Innovación y Universidades MCIN/AEI/10.13039/501100011033 Ministerio de Ciencia, Innovación y Universidades PTA2017-14779-I, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Deformation and magnetic fabrics in isoclinal folds of the Variscan Pyrenees

  • Oliva-Urcia, Belén
  • Román-Berdiel, T.
  • Clariana, Pilar
  • Soto, Ruth
  • Izquierdo Llavall, Esther
  • Casas-Sainz, Antonio M.
23 p., [EN] Magnetic fabrics are used as strain markers since they reflect the orientation-distribution of grains in a rock. In this work we analyzed, from the point of view of anisotropy of magnetic susceptibility (at low-temperature and room temperature), Devonian (29 sites) and Ordovician-Silurian (3 sites) sedimentary rocks in the Pyrenean Axial Zone, totalling 611 samples. The main target is to determine the strain in relation to the Variscan (polyphased) and Alpine orogenies in limestones and shales. The magnetic information also derives from thermomagnetic curves, acquisition of the isothermal remanent magnetization (IRM) and coercivity of the remanence analyses, together with hysteresis loops and stepwise thermal demagnetization of induced IRM in 3 axes techniques. The analyses of magnetic properties were complemented with optical microscopy observations and calcimetries. In two of the sample areas (Sen and Llisat valleys), the minimum axes of the magnetic susceptibility ellipsoid (k<inf>min</inf> axes) are mostly perpendicular to bedding whereas in the other two (Zinqueta valley and near Posets peak area), a more developed tectonic fabric is found: the k<inf>min</inf> axes are not completely perpendicular to bedding, and the magnetic susceptibility ellipsoid relates to the foliation plane. Different minerals carry a concordant magnetic fabric with pyrrhotite, magnetite (ferromagnetic s.l.) and phyllosilicates (paramagnetic), and little influence of calcite grains (diamagnetic). The magnetic fabric is interpreted to form at the early stages of the Variscan deformation, prior to the dextral transpression synchronous with granite emplacement that characterizes the late stages of the Variscan Orogeny. However, contact metamorphism and associated fluid circulation can enhance or obliterate the primary magnetic fabric., Field work and thin section preparation was possible thanks to the “Ayuda a la Investigación de la Comarca de Sobrarbe” and National Project CGL 2017-90632-REDT. Project PID 2019-108753 GB-C22, funded by MICIN/AEI/10.3039/501100011033 and by “ERDF A way of making Europe” is also aknowledged. Proyecto del Gobierno de Aragón (E32_20R: Grupo de Investigación Geotransfer)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Secondary precipitation of Fe–Ti oxides as a source for strongly changing magnetic properties in ancient volcanic rocks (Cadí Basin, Pyrenees)

  • Simón-Muzás, Ana
  • Casas-Sainz, Antonio M.
  • Soto, Ruth
  • Oliva-Urcia, Belén
[EN] Strong changes of magnetic properties (magnetic susceptibility and natural magnetic remanence) affecting large volumes of rocks can be conditioned by a series of factors, including circulation of hydrothermal fluids or meteoric waters, often favored by the primary porosity of the rock or pervasive fracturing. In the Late Carboniferous-Permian Cadí Basin, in the Eastern Pyrenees, there are volcanic rocks that show a unique pattern of magnetic anomalies up to 200 nT in amplitude revealing a heterogeneous distribution of their magnetic properties. To unravel the origin of these anomalies, we performed a detailed study of the magnetic properties of the volcanic and volcaniclastic rocks, combined with magnetic surveying and analysis of brittle structures. The results indicate that the origin of the strong variations in the magnetic properties is linked to: (i) lithological changes within the volcanic series, and (ii) the inhomogeneous secondary precipitation of ferromagnetic minerals. As a result of these secondary processes, magnetic fabrics do not reliably record either the volcanic paleoflow or the deformation imprint. The mineralogical composition can be interpreted as the result of a strong hydrothermal alteration that took place during early diagenetic stages, which was also responsible for the neoformation of magnetite crystals with variable titanium content. Random fluid circulation during the Late-Variscan stage could be the origin of these strong variations in magnetic properties., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. This study has been supported by Project grants PID2020-114273GB-C22, PID2019-108753GB-C22, PID2023-148256NB-I00 and FPU19/02353 funded by MCIN/ AEI/10.13039/501100011033 “ERDF Away of making Europe” and “ESF Investing in your future”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Interplay of caldera and tectonic subsidence in an inverted Late Carboniferous–Permian basin (Central Pyrenees)

  • Simón-Muzás, Ana
  • Soto, Ruth
  • García-Lasanta, C.
  • Housen, Bernard
  • Gisbert Aguilar, Josep
  • Casas-Sainz, Antonio M.
24 p., [EN] Deposits of thick volcanic and volcaniclastic series can be interpreted as either related to regional tectonics (commonly extensional or transtensional tectonics) or local volcanic mechanisms (caldera collapse). In order to distinguish between these two end-member mechanisms, we propose the use of magnetic techniques, namely analysis of Anisotropy of Magnetic Susceptibility (AMS) and paleomagnetism, and analysis of geological structures. These techniques have been applied to the Estac Basin (Central Pyrenees), an inverted Late Carboniferous-Permian basin now involved in the antiformal stack of the Pyrenean belt. AMS data provide directions of flow of volcanic rocks that can be interpreted in terms of palaeo-slopes and therefore can be related to structures contemporary with deposition and Late Carboniferous-Permian volcanic activity. The maximum of the magnetic lineation (i.e. volcanic paleoflow) direction is bimodal, with (i) an absolute maximum (as occurring in most South-Pyrenean Late Carboniferous-Permian basins) along a WNW-ESE direction and (ii) a secondary magnetic lineation along an N-S direction. Paleomagnetic data obtained from the volcanic products show a primary magnetization or early remagnetization compatible with the Late Carboniferous-Permian paleomagnetic reference direction and allow us to reconstruct an early folding probably related to the warping of the basin. The magnetic and structural data can be interpreted according to a volcano-tectonic subsidence model in which E-W faults played a major role and caldera collapse contributed to the important thickness of the volcaniclastic deposits., This study has been supported by Project grants PID2020-114273 GB-C22, PID2019-108753 GB-C22, FPU19/02353 and EST22/00287 for the mobility and stage at Western Washington University funded by MCIN/ AEI/10.13039/501100011033, "ERDF Away of making Europe" and "ESF Investing in your future"., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Salt tectonics vs. inversion tectonics: The anticlines of the western Maestrazgo revisited (eastern Iberian Chain, Spain)

  • Liesa, Carlos L.
  • Casas-Sainz, Antonio M.
  • Aurell, Marcos
  • Simón, José L.
  • Soria, Ana R.
Many works in the last decades underline the role of evaporites, not just as a conditioning factor but as the engine for subsidence and eventually basin inversion. The western Mediterranean alpine ranges are being investigated in this regard because of the presence of discontinuous units of Permian to Triassic evaporites, deposited in the western Tethys basins. This work presents a thorough analysis of two particular structures (Cañada Vellida and Miravete anticlines) in the intraplate Maestrazgo basin (eastern Iberian Chain, Spain) in which evidence to support their reinterpretation as salt-driven structures have been recently reported. Our analysis includes (i) a comprehensive stratigraphic and structural study of the folds along their entire trace, (ii) the compilation of thickness and distribution of evaporite–bearing and supraevaporite units, paying special attention to changes in the thickness of units in relation to anticlines, and (iii) the study of fault patterns, sometimes in relation to the mechanical stratigraphy. All three aspects are also documented and discussed on a regional scale. The new data and interpretations reported here reinforce the extensional origin of the Late Jurassic–Early Cretaceous basins, and the role of regional extensional tectonics as the responsible for the development of first-order syn-sedimentary normal fault zones driving the formation and evolution of sub-basins. These basins were subsequently inverted and deformed, including the formation of complex, box-geometry anticlines that, in their turn, controlled deposition in Cenozoic basins. The review of the arguments that support the alternative of salt tectonics for the origin of such anticlines has allowed us to delve into the sedimentary and tectonic evolution of the inverted extensional basins and to propose a specific model for the development of these faulted anticlines. The role of salt levels and other interlayered detachments in the structuring of sedimentary basins and their inversion is also pondered. The observations in the eastern Iberian Chain reported here have implications to assess ongoing reinterpretations in terms of salt tectonics in other alpine basins and ranges of the western Mediterranean.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

El magmatismo de Atienza (NW de la Cordillera Ibérica): edad, origen y arquitectura del sistema magmático

  • Majarena, U.
  • Galé, C.
  • Esteban, J. J.
  • Lago, M.
  • Gil-Imaz, A.
A sill covering an area of more than 15 km2, several dykes up to 5 m thick and a volcanoclastic deposit crop out with similar petrology in the sector of Atienza (NW Iberian Chain, Spain). They consist of calc-alkaline porphyritic andesites with phenocrysts of plagioclase, amphibole, biotite, garnet and orthopyroxene. Based on U–Pb zircon analysis, an age of 290 ± 3 Ma (Sakmarian-Artinskian in the Cisuralian) has been calculated for this magmatism. The chemistry and geothermobarometry on amphibole crystals revealed crystallisation at different depths between 31 and 16 km, involving several events of magma recharge and fractional crystallisation. Magma ascent led to destabilisation of the amphibole crystals, their replacement by biotite, and the formation of thick microcrystalline coronas. Whole-rock trace element and isotopic compositions support a strong crustal influence in the origin of the magma. Crustal melting was produced by heating generated after lithospheric thinning, delamination, and asthenospheric rise produced after the uplift of the Variscan Orogen and the oroclinal folding of the Iberian Massif.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Dyke or pipe? Contributions of magnetic fabrics to the reconstruction of the geometry of an eroded subvolcanic body (Cadí basin, Pyrenees)

  • Simón-Muzás, A.
  • Casas-Sainz, A.
  • Soto, R.
  • Beamud, E.
  • Gisbert, J.
The reconstruction of the geometry of igneous bodies in inverted basins is often a difficult task, because most of their volume can be either below or above the topographic surface. Indirect methods, such as the determination of their internal fabric can give clues to constrain geometrical reconstructions. The Sant Salvador intrusion, located in the Late Carboniferous-Permian Cadí basin (Central-Eastern Pyrenees), is a good example for testing the application of magnetic fabrics to shallow igneous bodies because of (i) its characteristics in terms of crystal composition/orientation, showing a homogeneous petrofabric controlled by plagioclase crystals 0.4 mm in size, (ii) its good, though partial, preservation, (iii) its position in the stratigraphical succession, between volcaniclastic sediments and unconformably overlying red beds, and (iv) the many unknown factors related to the intrusion, including the geometry of the body and its depth and the amount of erosion after intrusion. Furthermore, the Sant Salvador intrusion provides opportunity for checking the correspondence between the petrofabric and the magnetic fabrics when the magnetic carriers of susceptibility (with an average value of 5217·10−6 SI) are mainly ferromagnetic. In this case the main magnetic carriers are magnetite and also hematite, the latter resulting from oxidation processes at the paleosurface. The results of Anisotropy of Magnetic Susceptibility show a bimodality in the K1 disposition after bedding restitution: vertical in the deeper areas of the intrusion and subhorizontal, E-W, in the uppermost stratigraphic positions with an intermediate necking zone in which transition from vertical to horizontal flow is interpreted to occur. Bands deflecting the mineral foliation at the micro scale have also a tectonic or thermal origin but do not seem to interfere with the magnetic ellipsoid axes. Columnar jointing is interpreted to be parallel to the long axis of the intrusion (and therefore to magma flow, and perpendicular to the paleosurface. All these features indicate that the Sant Salvador intrusion can be interpreted as a subvertical pipe feeding a sill that was eroded before the sedimentation of the overlying red beds.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Applying magnetic techniques to determine the evolution of reactive diapirs: A case study of the Lusitanian basin

  • Calvín, Pablo
  • Oliva-Urcia, Belén
  • Kullberg, José C.
  • Torres-López, Sara
  • Casas-Sainz, Antonio
  • Villalaín, Juan J.
  • Soto, Ruth
The western Iberian margin underwent complex evolution during the Mesozoic and Cenozoic. It was subjected to successive extensional and compressional phases, where salt tectonics played a significant role in both. The role of onshore structures during basin formation and inversion is not fully understood, and different chronological relationships between structures have been proposed. To better understand the history of salt body emplacement, we present paleomagnetic and magnetic fabric data from Jurassic carbonates, comprising cover rocks of the diapiric system. Magnetic fabrics show two types of behavior. Type 1 fabrics show magnetic foliation parallel to bedding—the magnetic lineation, after bedding correction, is horizontal and parallel to the diapiric contacts. This fabric is a consequence of overpressure during salt migration, whose effect is limited to the area near the diapirs. Type 2 fabric is characterized by a magnetic lineation parallel to the strike of bedding and—the intermediate and minimum magnetic axes are dispersed on a vertical girdle parallel to the shortening direction. This is interpreted as a compressional fabric that developed during basin inversion. Paleomagnetic results reveal a stable paleomagnetic component carry by magnetite with characteristic unblocking temperatures (175–450 °C) and coercivities (30–100 mT). Twelve of the 14 calculated mean directions show homogeneous behavior in their magnetic properties and directions, with positive inclinations, northward directions, with synfolding to postfolding behavior. We calculated the remagnetization direction (Dec: 347.5°, Inc.: 51.3°) and compare it to the APWP. It was likely acquired during the Cretaceous Normal Superchron, following the extensional deformation phase and prior to basin inversion. The paleodips (i.e., the bedding at remagnetization times) indicate that tilting occurred mainly during the extensional stage, meaning that the diapirs had already been developed. This indicates a strong Mesozoic salt tectonic component in the present-day structuring of this sector of the Lusitanian basin.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Paleomagnetic study of Late-Carboniferous-Permian rocks from the Cadí Basin (Eastern Pyrenees): Tectonic implications

  • Simón-Muzás, Ana
  • Casas-Sainz, Antonio M.
  • Soto, Ruth
  • Pueyo, Emilio L.
  • Beamud, Elisabet
  • Oliva-Urcia, Belén
We have carried out a detailed paleomagnetic study of volcanic rocks (18 sites) and red beds (10 sites) from the Late-Carboniferous-Permian series of the Cadí Basin (Eastern Pyrenees). The study provides reliable Late Carboniferous-Permian paleomagnetic directions, in an area where paleomagnetic studies are scarce. The main characteristic component in both rock types shows a SSE direction with a shallow inclination and a dominant reverse polarity. The magnetic carriers, both in the volcanic rocks and the red beds, are magnetite and hematite. The main component is interpreted as a primary magnetization of Permian age in the red beds; in the Late Carboniferous volcanic rocks, the main component likely represents primary magnetization or early remagnetization. These results are consistent with the poles for the Iberian plate during the Permian and indicate an absence of regional vertical axis rotations for the Orri nappe, in whose hanging wall the Cadí Basin was transported southwards during the Pyrenean orogeny.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Los Montes Obarenes: diapirismo e inversión tectónica en el margen sur de la Cuenca Vasco-Cantábrica

  • Mirumbrales Ayllón, Sergio
  • Casas Sainz, Antonio M.
  • Román-Berdiel, Teresa
La Sierra de Cantabria y los Montes Obarenes suponen el límite meridional de la Cuenca Vasco-Cantábrica, cuya inversión tectónica se produjo como consecuencia de la Orogenia Alpina. En este estudio se presenta un análisis estructural de las principales estructuras de un sector de los Montes Obarenes, poniendo especial énfasis en la geometría y evolución del Cabalgamiento Frontal de Sierra de Cantabria-Montes Obarenes. Con este fin, se ha realizado una cartografía geológica a escala 1:25.000, así como la toma de datos estructurales que han permitido construir cuatro cortes geológicos y definir las estructuras presentes. Se concluye que el área de estudio se caracteriza por un sistema de pliegues y cabalgamientos de dirección localmente E-W y vergencia sur. Este cinturón formado por materiales mesozoicos se encuentra despegado del basamento suponiendo un caso de tectónica de piel fina en el que el Keuper actúa como nivel de despegue principal. Desde el punto de vista geométrico, el frente de cabalgamiento presenta rasgos resultantes tanto de la inversión de estructuras extensionales previas como del aplastamiento de diapiros mesozoicos alineados con el margen de la cuenca. Los estados de esfuerzos inferidos a partir de lineaciones de disolución de clastos indican la existencia de una cierta componente direccional.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Multiple compression directions and basinal response in a rhomb-shaped terrestrial basin: The Cuevas de Cañart syncline (Iberian Chain, eastern Spain)

  • Steel Hart, Lourenço
  • Casas-Sainz, Antonio M.
  • Simón, José L.
Rhomb-shaped basins have been commonly attributed to strike-slip tectonics, linked to fault bends and jogs (pull-apart basins). The case-study presented in this work (Las Cuevas de Cañart basin, Iberian Chain) is a 2 km × 5 km continental basin that shows a particular combination of geometric and sedimentary features. It shows a syncline geometry with steeply-dipping limbs, thickness of syn-tectonic sedimentary continental filling of about 1000 m, high amplitude/wavelength ratio, and different fold trends, some of them oblique to the main trend of the Iberian Chain. All these features make it an interesting case of a mixed-type basin, sharing both compressional and strike-slip features. The Cuevas de Cañart basin shows a Mesozoic, pre-compressional sequence linked to the extensional processes dominating in the marginal zones of the Maestrazgo basin, with a series up to 1500 m thick of limestones, sandstones and shales. These units overlie a detachment level (Upper Triassic Keuper facies) and show thickness variations controlled by NW-SE and NE-SW striking normal faults. During the Cenozoic compression, both fault systems were re-activated, and newly formed E-W folds (perpendicular to one of the dominant shortening directions) also appeared in the southern basin margin. The detailed structural study of this basin evidences the role of different types of structures (basement faults, thrusts formed under different compression directions) and the relevance of the detachment level in the evolution of compressional basins and thin-skinned fold-and-thrust belts.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Origin of oblique structures controlled by pre-tectonic thickness variations in frictional and salt-bearing fold-and-thrust belts: Insights from analogue modelling

  • Santolaria, Pablo
  • Izquierdo-Llavall, Esther
  • Soto, Ruth
  • Román-Berdiel, Teresa
  • Casas-Sainz, Antonio
This work includes, first, a synthesis of experimental analogue modelling programs assessing the influence of along-strike thickness variations in the development of oblique structures in fold-and-thrust belts. As a second part, we present a new experimental program testing, systematically, the influence of tapered décollement-cover thrust wedges. Previous experiments show that frictional, brittle models feature numerous, short-wavelength structures where the cover is thinner. Deformation fronts are totally or locally oblique to the backstop when the cover thinning is progressive or sharp, respectively. Low (<30°) or higher structural obliquities occur when thickness variations are progressive or sharp, respectively. The addition of a basal or intermediate décollement, commonly entails the transference of deformation towards its external pinch-out. Consequently salients occur and transfer zones and oblique structures form over décollement boundaries. Their location and orientation strongly depend on the pre-compressional shape of the décollements. Furthermore, as demonstrated by our modelling results, tapered brittle covers over viscous décollements result in asymmetric thrust wedges formed by structures that end or change their vergence laterally, resulting in obliquities generally <30°. Two natural case studies, showing strong (South Pyrenean Central Salient) or moderately oblique (Keping Shan fold-and-thrust belt) structures are revisited and compared to the described analogue models.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Magnetic surveying as a proxy for defining cyclicity in thick sedimentary fillings: Application to the Cretaceous Cameros Basin (N Spain)

  • Casas, Antonio M.
  • Muñoz, Arsenio
  • Tella, Alberto
  • Liesa, Carlos L.
This work proposes the application of magnetic surveying to the study of cyclicity in sedimentary basins. This application is favoured by the particular bed attitude/topography relationships found in the eastern sector of the Cretaceous Cameros Basin, N Spain. Both the measured total magnetic field (after diurnal correction) and the vertical magnetic gradient, provide a profile (14 cm separation between measurements, in average) of the short-wavelength magnetic anomalies associated with the sedimentary sequence. These anomalies depend on the magnetic susceptibility (dominant for low Koenigsberger ratios, a common scenario in sedimentary rocks), and the magnetic remanence (whose orientation is fairly constant in remagnetised basins) of the different sedimentary units. The comparison with direct measurements of magnetic susceptibility (in the field and in the laboratory) provided a successful double-check. The cyclostratigraphic analysis of magnetic profiles of this 6 km-thick series indicates the existence of cycles of 405 kyr (long eccentricity) and 100–125 kyr (short eccentricity), as well as other lower and higher frequency cycles. Cycles with similar, but slightly different, periodicities are the result of different sedimentation rates (mean of ∼0.2 mm/yr, with values ranging between ∼0.1 and ∼0.36 mm/yr). These results provide and indirect method for dating the basin fill, between the Tithonian–Berriasian boundary and the basalmost Albian (∼143.2–∼112.6 Ma), and impose new constraints for basin evolution. The results obtained open a promising field for quick and reliable determination of magnetic properties and cyclicity in thick sedimentary sequences.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

The Taguelft syncline (Moroccan Central High Atlas) an example of extension-related mini-basin evidenced by paleomagnetic data

  • Moussaid, B.
  • Villalaín, J.J.
  • El Ouardi, H.
  • Casas-Sainz, A.
  • Oliva-Urcia, B.
  • Torres-López, S.
  • Román-Berdiel, T.
  • Bouya, N.
  • Soto, R.
The purpose of this work is to use paleomagnetic data to determine the tectonic evolution of the inverted High Atlas basin in the area of the Taguelft syncline. This syncline shows two well defined rock types of Jurassic age: marly limestones and red beds, and therefore provides the opportunity of comparing paleomagnetic results from rocks with different magnetic mineralogy. Forty-three sites, in an area of 250 km2 were the subject of a paleomagnetic and rock magnetic study. Both lithologies display a stable interfolding remagnetization, alternatively carried by magnetite in marly-limestones and hematite in red beds. The small circle intersections (SCI) method applied separately to the mean directions of the two rock types indicate a synchronous record of remagnetization, that can be dated as Mid-Cretaceous (100 Ma) by comparing the direction (SCI) with the expected directions obtained from the Global Apparent Wander Path in African coordinates. Small circle techniques were used to reconstruct the syncline geometry at the remagnetization time. Paleodips quantification reveals that this area behaved as an extension-related mini-basin, with strong control by salt migration, before and during the sedimentation of Bathonian red beds.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Geology of the Late Carboniferous, Permian and Early Triassic basins of the Eastern Pyrenees

  • Gisbert, Josep
  • Simón-Muzás, Ana
  • Casas-Sainz, Antonio
  • Soto, Ruth
We present a detailed geological map of the Upper Carboniferous, Permian and Triassic rocks of the southern border of the Axial Zone in the Eastern Pyrenees. These units were deposited in three intra-mountain, terrestrial basins, characterized by the emplacement/deposition of volcanic, sub-volcanic and volcaniclastic units (ca. 1000 m thick) together with continental red beds. The map is based on unpublished drafts, sketches and structural data. This previous information was complemented with new structural, petrologic and stratigraphic data. The geological map is presented together with three cross-sections, a detailed lithological description, and a stratigraphic correlation panel to help understand the stratigraphy, volcanism and structure and, ultimately, the geometry and origin of the highly subsident areas of this segment of the chain in post-Variscan times. The geological map gives new clues for reconstructing the geometry of these basins and the distribution of the volcanic episodes during the Late Carboniferous and Permian.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Imprint of paleocurrents, extensional and compressional deformation in the magnetic fabrics of the Permo-Triassic red beds of the Cadí Basin (Eastern Pyrenees)

  • Simón-Muzás, Ana
  • Soto, Ruth
  • Pueyo, Emilio L.
  • Beamud, Elisabet
  • Oliva-Urcia, Belén
  • Casas-Sainz, Antonio M.
A magnetic fabric study was carried out in Permo-Triassic continental sedimentary red beds from the Cadí Basin (Eastern Pyrenees). These rocks were deposited on the top of a volcanic sequence when the regional tectonic regime changed from transtension to extension. Standard paleomagnetic cores (cylinders), cubes and irregular fragments were obtained for this study in 25 sites distributed throughout the basin. The “fragment methodology”, using oriented irregular fragments in claystones, is demonstrated to be successful and replicable. The aims of this study are (i) to interpret the magnetic fabrics in red beds according to sedimentary or tectonic models; (ii) to establish the relationship between the magnetic fabrics in the sedimentary red beds and the magnetic fabrics previously obtained in the underlying volcanic series, and (iii) to compare magnetic fabrics in continental sediments with other basins of the same age to interpret the tectonic scenario in the Iberian plate during Permian and Triassic times. The results obtained reveal a primary magnetic fabric that recorded a syn-sedimentary stretching in two nearly perpendicular directions, WNW-ESE and N-S, linked to basin development. Other sedimentary and tectonic factors, such as paleocurrents and deformation derived from the Alpine compression did not have a significant influence on the development of magnetic fabrics. The geodynamic scenario of the Iberian plate during Late Permian to Triassic times can be explained according to regional trajectories of extensional stress due to the activity of the North-Pyrenean fault zone.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Edad del magmatismo cisuraliense en el Anticlinal de Montalbán (Cordillera Ibérica, Teruel)

  • Majarena, Urbez
  • Esteban, José Julián
  • Galé, Carlos
  • Lago, Marceliano
  • Gil, Andrés
En este trabajo se presentan las tres primeras dataciones radiométricas (U-Pb en circón) de las intrusiones subvolcánicas del Anticlinal de Montalbán (Cordillera Ibérica). Los resultados obtenidos indican una edad de 292 ± 2 Ma para un dique andesítico en Segura de Baños, 291 ± 8 para un sill andesítico en Hoz de la Vieja y 293 ± 3 Ma para un sill dacítico en Montalbán (Teruel). Estos resultados evidencian que el magmatismo del anticlinal de Montalbán estuvo activo entre los 293 y 291 Ma (Sakmariense). Las dataciones realizadas permiten integrar las intrusiones estudiadas en el magmatismo calco-alcalino de composición predominantemente intermedia que se produjo durante el inicio del Cisuraliense a lo largo de todo el SO del Orógeno Varisco Europeo.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Evolución tectónica del entorno del Cabalgamiento de la Sierra de Arcos (Ariño, Cordillera Ibérica nororiental)

  • Ruiz Blasco, Daniel
  • Román Berdiel, Teresa
El área de Ariño (Rama Aragonesa de la Cordillera Ibérica, borde norte de la cuenca de Oliete) muestra un conjunto de macroestructuras que resultan de la evolución tectónica de la misma: pliegues con orientación variada (NNO-SSE, E-O y NO-SE), fallas normales conjugadas, y un cabalgamiento plurikilométrico (cabalgamiento de la Sierra de Arcos) enraizado en las evaporitas del Triásico superior. El análisis de estas estructuras permite proponer dos hipótesis acerca de la evolución tectónica de este sector de la Cordillera Ibérica. La primera versa sobre la existencia de varios episodios compresivos de distinta orientación en sus ejes de esfuerzo, que generaron las estructuras tectónicas presentes en la zona de estudio en el contexto de la Orogenia Alpina. La segunda se centra en la existencia de un solo campo de esfuerzos, de orientación N-NNE, y la anisotropía en la orientación de sus elementos, fruto de la presencia de estructuras de origen extensional cretácicas relacionadas con fallas de zócalo.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Foliación y fábricas magnéticas asociadas a interferencia de pliegues en la Zona Axial Pirenaica (La Seu d’Urgell, Lleida)

  • Simón Muzás, Ana
  • Casas Sainz, Antonio
  • Soto, Ruth
  • Clariana, Pilar
  • Margalef, Aina
La zona de estudio, en las inmediaciones de La Seu d’Urgell (Zona Axial pirenaica), está constituida por una serie estratigráfica de rocas Cambro-Ordovícicas, en su mayoría detríticas, donde la discordancia Sarda se identifica claramente entre la Serie de Jujols y la Fm. Conglomerados de la Rabassa. Las principales estructuras son pliegues N-S de plano axial subhorizontal que muestran una foliación asociada, bien desarrollada en los niveles pelíticos (y claramente visibles en lámina delgada) y pobremente desarrollada en los niveles de arenisca. En los conglomerados suprayacentes a la discordancia Sarda (Fm. Conglomerados de la Rabassa) la foliación regional se caracteriza por tener sobreimpuestas bandas de cizalla conjugadas que rodean los clastos. Las fábricas magnéticas (principalmente paramagnéticas) son coherentes con las microestructuras observadas a pesar de que la correspondencia entre los ejes de las fábricas magnéticas y los ejes de las estructuras observadas en el campo no es sencilla. El máximo de las direcciones de lineación es bimodal (N-S y E-W), lo cual puede ser interpretado como el resultado de una interferencia de pliegues (tipo 2 de Ramsay).
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Cisuralian calc-alkaline magmatism in the Herrera Unit of the Iberian Chain (Cantabrian Zone of the Iberian Massif, Spain): age and geodynamic constraints from U–Pb laser ablation inductively coupled plasma mass spectrometry zircon analysis

  • Majarena, Urbez
  • Esteban, José Julián
  • Galé, Carlos
  • Gil-Imaz, Andrés
  • Lago, Marceliano
The Herrera Unit of the Iberian Chain (Cantabrian Zone, Iberian Massif) exhibits hundreds of outcrops of calc-alkaline igneous rocks that have been classically attributed to the Upper Carboniferous and the Lower Permian, although only two absolute radiometric ages have been reported. This work, with six new zircon laser ablation inductively coupled plasma mass spectrometry ages obtained from some of the most representative outcrops, provides the most complete age repository for the calc-alkaline magmatism of the prolongation of the Cantabrian Zone within the Iberian Chain. The obtained ages range between 294 and 288 Ma (Cisuralian Epoch) and show a well-defined peak at 290 Ma, which can be attributed to a main magmatic activity stage. This result allows us to correlate and integrate this magmatism within the widespread SW European calc-alkaline magmatism province developed under strike-slip tectonics. Therefore, the Iberian Chain magmatism and its age can be considered as a good temporal marker for the upper limit of the compressive tectonics associated with the Variscan Orogeny and the onset of the extensional tectonics linked to Permo-Triassic rifting.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Pliegues, zonas de cizalla, cabalgamientos y mecanismos de deformación en estructuras alpinas de la cubeta de Cuevas de Cañart (Cordillera Ibérica)

  • De Matos Domingues Steel Hart, Lourenço
  • Casas-Sainz, Antonio
The sequence in the development of structures in the Cuevas de Cañart (CC) syncline (Linking zone in the Iberian Chain), provides an opportunity to understand the distribution of deformation mechanisms in thrusts at shallow crustal levels. The CC basin shows three different structural trends that resulted in the folding of structures with Iberian direction (NW-SE), by subsequent folds showing an E W direction. The third structural trend, NE-SW, is dominant in the area. The two studied structures are folded thrusts that, at present day, appear as strike slip faults, parallel or slightly oblique to bedding. Both of them become thrusts after restoring of the second folding stage. The present beds attitudes help to decipher the different mechanisms involved in the deformation along the stratigraphic column: the shallow-dipping thrust in the upper part of the sequence is linked to drag folds in both walls, whereas in the lower part (100 m below, approximately) deformation is resolved by means of a well-developed solution cleavage and brittle faults. The final stages of deformation probably involved the re-activation of some of these faults. La secuencia de desarrollo de estructuras en el sinclinal de Las Cuevas de Cañart (CC) (Zona de Enlace de la cordillera Ibérica), ofrece una oportunidad singular, para entender la distribución de mecanismos de deformación en cabalgamientos formados en niveles estructurales superficiales. La cuenca de CC contiene familias de estructuras con tres direcciones, resultantes de la superposición de pliegues asociados a cabalgamientos, inicialmente de dirección NW-SE, posteriormente plegados por pliegues de dirección E-W. La dirección estructural NE-SW es la dominante en la zona. Las dos estructuras estudiadas son cabalgamientos plegados, que aparecen actualmente como fallas de desgarre paralelas o ligeramente oblicuas a la estratificación. Las dos adquieren geometría de cabalgamientos, una vez restituida la posición de las capas a su posición original. Las orientaciones actuales ayudan a entender los mecanismos de deformación involucrados: A techo de la secuencia, un cabalgamiento de baja inclinación, relacionado con pliegues de arrastre en ambos bloques, y más abajo en la secuencia (aproximadamente 100 m), la deformación se resuelve mediante presión disolución y fallas inversas de fuerte buzamiento. Los últimos estadios de deformación probablemente están relacionados con la reactivación de estas fallas.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Deformation and magnetic fabrics in isoclinal folds of the Variscan Pyrenees

  • Oliva-Urcia, B.
  • Román-Berdiel, T.
  • Clariana, P.
  • Soto, R.
  • Izquierdo-Llavall, E.
  • Casas-Sainz, A.
Magnetic fabrics are used as strain markers since they reflect the orientation-distribution of grains in a rock. In this work we analyzed, from the point of view of anisotropy of magnetic susceptibility (at low-temperature and room temperature), Devonian (29 sites) and Ordovician-Silurian (3 sites) sedimentary rocks in the Pyrenean Axial Zone, totalling 611 samples. The main target is to determine the strain in relation to the Variscan (polyphased) and Alpine orogenies in limestones and shales. The magnetic information also derives from thermomagnetic curves, acquisition of the isothermal remanent magnetization (IRM) and coercivity of the remanence analyses, together with hysteresis loops and stepwise thermal demagnetization of induced IRM in 3 axes techniques. The analyses of magnetic properties were complemented with optical microscopy observations and calcimetries. In two of the sample areas (Sen and Llisat valleys), the minimum axes of the magnetic susceptibility ellipsoid (kmin axes) are mostly perpendicular to bedding whereas in the other two (Zinqueta valley and near Posets peak area), a more developed tectonic fabric is found: the kmin axes are not completely perpendicular to bedding, and the magnetic susceptibility ellipsoid relates to the foliation plane. Different minerals carry a concordant magnetic fabric with pyrrhotite, magnetite (ferromagnetic s.l.) and phyllosilicates (paramagnetic), and little influence of calcite grains (diamagnetic). The magnetic fabric is interpreted to form at the early stages of the Variscan deformation, prior to the dextral transpression synchronous with granite emplacement that characterizes the late stages of the Variscan Orogeny. However, contact metamorphism and associated fluid circulation can enhance or obliterate the primary magnetic fabric.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Sobre el origen de la fracturación de dirección NE-SW en la cuenca de Aínsa-Sierras Exteriores Aragonesas (Pirineo Central)

  • Bentué Lalueza, Lorena
  • Román-Berdiel, Teresa
  • Casas Sainz, Antonio
Se analiza un sistema de fracturas en la transición entre la cuenca de Aínsa y las Sierras Exteriores (Pirineo Central). Se presenta el análisis estructural de la geometría y orientación de las fracturas a lo largo de tres unidades estratigráficas: La Fm. calcárea de Guara, la Fm. Sobrarbe y la Fm. Escanilla. La estructura general se caracteriza por un monoclinal de escala kilométrica infrayacente al cabalgamiento surpirenaico. La cartografía y el análisis de la fracturación permiten definir tres conjuntos principales: el primero presenta una dirección NE-SW, el segundo una dirección NW-SE y el último una dirección N-S. Los indicadores cinemáticos del conjunto N-S indican un claro movimiento dextral, y los rasgos cartográficos muestran que el conjunto NE-SW está constituido por fallas normales de fuerte buzamiento con bloques hundidos hacia el SE. Los principales conjuntos de fracturas (NE-SW y N-S) pueden interpretarse como un sistema de fallas conjugadas inicialmente direccionales en el que el eje σ1 se sitúa alrededor de 020. Posteriormente, estas fallas podrían haberse reactivado como normales debido a la tectónica salina relacionada con la extrusión del Triásico Superior hacia el diapiro de Naval. A fracture system found in the Aínsa basin-External Sierras (Central Pyrenees) area is here analysed. This study performs a structural analysis of fracture geometry and orientation along three stratigraphic units: The calcareous Guara Fm., the Sobrarbe Fm., and the Escanilla Fm. The general structure is characterised by a kilometer-scale monocline underlain by the South Pyrenean main thrust. The mapping and the analysis of fractures data allows to define three main sets: the first set presents a NE-SW direction, the second one a NW-SE direction and the last one a N-S direction. Ki-nematic indicators of the N-S set indicate a clear dextral movement, and cartographic features show that the NE-SW set is constituted by steeply-dipping normal faults with downthrown blocks to the SE. The main fracture sets (NE-SW and N-S) can be interpreted as an initially conjugate strike-slip system where the σ1 axis is located around 020. Subsequently, these faults could be reactivated as steeply-dipping normal faults due to salt tectonics related to extrusion of the Upper Triassic towards the Naval diapir.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Comparing magnetic fabrics in in-basin and out-of-basin domains: The Mesozoic western Cameros Basin (N Spain)

  • Román-Berdiel, T.
  • Oliva-Urcia, B.
  • Torres, S.
  • Yenes, L.
  • Villalaín, J.J.
  • Marcén, M.
  • Casas-Sainz, A.M.
Anisotropy of magnetic susceptibility (AMS) is a very sensitive and accurate technique for determining deformation in rocks that show no other markers of deformation. In the Mesozoic-Cenozoic history of the Iberian plate, two stages have been clearly defined: an extensional period in which large sedimentary basins were generated (Late Jurassic-Early Cretaceous), and a tectonic inversion stage during the Cenozoic compression. However, details on the development and evolution of these stages, as well as the transition from extensional to compressional regime are not yet well understood. The western Cameros Basin provides the opportunity for testing the applicability of magnetic fabric to determine the tectonic regime at the transition between the syn-rift and the post-rift sequences in an area close to the out-of-basin domain and therefore, suitable for recording the far-field and the near-field constraints. Furthermore, the influence of the subsequent inversion on the magnetic fabrics in these two sequences can be also discussed. In this work, we have focused on the Jurassic (mostly limestones), Lower Cretaceous (mostly shales) and Upper Cretaceous (mostly limestones) rocks, taking a total of 575 samples from 47 sites. AMS results show the record of the Alpine compressional stage for most of the sites of the post-rift materials, while the syn-rift materials record a NE-SW stretching direction. This indicates that the extensional tectonic imprint remains in in-basin domains even after compression (and probably layer parallel shortening) provided that the intensity of extensional deformation is significant (i. e. linked to basin formation). Conversely, out-of-basin domains generally record compressional fabrics, both in the thinned syn-rift and post-rift sequences. Another key point in this work is the analysis of the out-of-phase anisotropy of magnetic susceptibility, which has allowed to improve to some extent the definition of the magnetic fabric in the, a priori, unfavorable lithologies for AMS studies, such as the limestones of the Jurassic and Upper Cretaceous.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Secondary precipitation of Fe–Ti oxides as a source for strongly changing magnetic properties in ancient volcanic rocks (Cadí Basin, Pyrenees)

  • Simón-Muzás, Ana
  • Casas-Sainz, Antonio M.
  • Soto, Ruth
  • Oliva-Urcia, Belén
Abstract Strong changes of magnetic properties (magnetic susceptibility and natural magnetic remanence) affecting large volumes of rocks can be conditioned by a series of factors, including circulation of hydrothermal fluids or meteoric waters, often favored by the primary porosity of the rock or pervasive fracturing. In the Late Carboniferous-Permian Cadí Basin, in the Eastern Pyrenees, there are volcanic rocks that show a unique pattern of magnetic anomalies up to 200 nT in amplitude revealing a heterogeneous distribution of their magnetic properties. To unravel the origin of these anomalies, we performed a detailed study of the magnetic properties of the volcanic and volcaniclastic rocks, combined with magnetic surveying and analysis of brittle structures. The results indicate that the origin of the strong variations in the magnetic properties is linked to: (i) lithological changes within the volcanic series, and (ii) the inhomogeneous secondary precipitation of ferromagnetic minerals. As a result of these secondary processes, magnetic fabrics do not reliably record either the volcanic paleoflow or the deformation imprint. The mineralogical composition can be interpreted as the result of a strong hydrothermal alteration that took place during early diagenetic stages, which was also responsible for the neoformation of magnetite crystals with variable titanium content. Random fluid circulation during the Late-Variscan stage could be the origin of these strong variations in magnetic properties. Graphical Abstract
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Medida de la fábrica magnética a partir de fragmentos irregulares orientados en un soporte cúbico mediante el puente de susceptibilidad Kappabridge

  • Higuero, Gustavo
  • Simón-Muzás, Ana
  • Casas, Antonio
Las innovaciones recientes del puente de susceptibilidad Kappabridge KL5 (Agico) permiten la medida de la anisotropía de la susceptibilidad magnética de especímenes estándar en una sola posición, ahorrando así tiempo sobre las medidas más lentas de tres posiciones, o 15 posiciones de los susceptómetros más antiguos. La necesidad de que sean especímenes estándar regulares (cúbicos o cilíndricos con medidas exactas) suele ser un inconveniente para el uso de los sistemas automatizados. Este factor, sumado a la necesidad creciente de muestreo de litologías finas (en el caso de rocas detríticas) o a la imposibilidad de muestrear rocas compactas mediante perforadoras portátiles (por ejemplo, rocas con fuerte fisibilidad) constituyen la motivación para fabricar soportes cúbicos de bajo coste mediante una impresora 3D. En este trabajo analizamos las propiedades magnéticas de los diferentes tipos (colores) de plástico utilizadas y ofrecemos una comparación entre los resultados obtenidos a partir de especímenes estándar y la técnica de fragmentos orientados propuesta.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Shortening-controlled magnetic fabrics in the Alpine thrust front of the Cantabrian Mountains

  • Oliva-Urcia, B.
  • Román Berdiel, T.
  • Torres-López, S.
  • Villalaín, J. J.
  • Casas-Sainz, A.
The magnetic fabrics (or anisotropy of magnetic susceptibility) are used in this work to decipher thrust kinematics in the Cantabrian (western) Pyrenees. Most of the analyzed rocks (total of 51 sites) correspond to the Mesozoic rifting and post-rifting stages (Triassic, Jurassic and Cretaceous) rocks in the Asturian-Leonese region, whose alpine structure is controlled by south-verging, basement-involved thrusts. Paramagnetic minerals are scarce as shown by the thermomagnetic analyses, and maghemite/hematite predominates as carriers of the magnetic fabric. The rifting phase is recorded by a primary fabric that remained unaltered during the alpine contraction, whereas the magnetic fabric of the Albian and Upper Cretaceous rocks show a reorientation due to contraction, which is better recorded in the fine grained continental facies of the Utrillas Group than in the carbonatic rocks overlying them. In the contractional fabrics found, the magnetic lineation delineates the thrust front enhancing the changes of the local shortening direction along. This reinforces the hypothesis of a strong control of the thrust direction by inherited structures.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Interplay of caldera and tectonic subsidence in an inverted Late Carboniferous–Permian basin (Central Pyrenees)

  • Simón-Muzás, Ana
  • Soto, Ruth
  • García-Lasanta, Cristina
  • Housen, Bernard
  • Gisbert, Josep
  • Casas-Sainz, Antonio
Deposits of thick volcanic and volcaniclastic series can be interpreted as either related to regional tectonics (commonly extensional or transtensional tectonics) or local volcanic mechanisms (caldera collapse). In order to distinguish between these two end-member mechanisms, we propose the use of magnetic techniques, namely analysis of Anisotropy of Magnetic Susceptibility (AMS) and paleomagnetism, and analysis of geological structures. These techniques have been applied to the Estac Basin (Central Pyrenees), an inverted Late Carboniferous–Permian basin now involved in the antiformal stack of the Pyrenean belt. AMS data provide directions of flow of volcanic rocks that can be interpreted in terms of palaeo-slopes and therefore can be related to structures contemporary with deposition and Late Carboniferous–Permian volcanic activity. The maximum of the magnetic lineation (i.e. volcanic paleoflow) direction is bimodal, with (i) an absolute maximum (as occurring in most South-Pyrenean Late Carboniferous–Permian basins) along a WNW–ESE direction and (ii) a secondary magnetic lineation along an N–S direction. Paleomagnetic data obtained from the volcanic products show a primary magnetization or early remagnetization compatible with the Late Carboniferous–Permian paleomagnetic reference direction and allow us to reconstruct an early folding probably related to the warping of the basin. The magnetic and structural data can be interpreted according to a volcano-tectonic subsidence model in which E–W faults played a major role and caldera collapse contributed to the important thickness of the volcaniclastic deposits.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Magnetic signature of the Camarena de la Sierra Jurassic magmatism in the SE Iberian chain (Teruel, Spain)

  • Oliva-Urcia, Belén
  • Casas-Sainz, Antonio
Magnetic fabrics are commonly studied to understand the magma flow in volcanic and hypovolcanic settings. In this work we present a magnetic fabric study in the Sierra de Javalambre (SE Iberian Chain), a geological unit that includes a swarm of Mesozoic volcanic intrusive and extrusive bodies associated with a hotspot and extensional deformation in Eastern Iberia during the Mesozoic. The sill sampled in this work is constituted by alkaline dolerites (ocean island basalts, OIB composition) and is a part of more than a hundred outcrops emplaced in Upper Triassic (Keuper facies) diapiric units and Jurassic limestones. The presence of Ti-poor titanomagnetite in the studied hypovolcanic rocks is inferred from temperature-dependent magnetic susceptibility curves and also from analyses of the three components isothermal remanent magnetization (IRM), since the decay of the magnetic susceptibility and the soft axis (0.12 mT) of the IRM occurs at 580°C. The magnetic susceptibility shows high values, in average 17554 × 10–6. The anisotropy of the magnetic susceptibility shows some dispersion of the maximum and intermediate axes on the bedding plane, whereas the minimum axes are clustered almost perpendicular to the bedding plane for the 158 standard analyzed samples. The magnetic lineation (clustering of the maximum axes of the anisotropy of magnetic susceptibility) is bimodal with WNW-ESE and NNE-SSW directions in the in-phase magnetic susceptibility, and can be interpreted as the flow direction of the magma controlled by the NW–SE and N-S extensional fault systems during the basinal (Jurassic) stage.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Emplacement kinematics of Cisuralian subvolcanic intrusions in the Iberian Chain (NE Spain): new insights from the structural and magnetic study of the Cerro Redondo dacitic intrusion

  • Majarena, U.
  • Pueyo, O.
  • Gil-Imaz, A.
  • Galé, C.
  • Lago, M.
  • Bauluz, B.
  • Rodríguez-Pintó, A.
A combined structural, petrological, and anisotropy of magnetic susceptibility (AMS) study of the Cisuralian (285 ± 2 Ma) Cerro Redondo dacitic intrusion (Iberian Chain, NE Spain) has been conducted to reconstruct its emplacement kinematics and determine its 3D geometry at the outcrop scale. This small igneous body, covering only 0.17 km2, displays a well-defined magmatic foliation that is affected by asymmetrical, steeply plunging folds at different scales. Our multidisciplinary analysis suggests that the Cerro Redondo intrusion formed through the emplacement of successive magma pulses, during which the original magmatic foliations were passively folded. Detailed AMS data reveal a superposition of three kinematic processes recorded in the magnetic fabric, all occurring prior to complete crystallization: the development of an early planar magmatic fabric, localized simple shear deformation, and subsequent folding of the magmatic foliation. This integrated structural, petrological, and AMS study indicates that the Cerro Redondo intrusion is a sub-vertical, asymmetric subvolcanic body, emplaced at upper crustal levels under the control of extensional (or transtensional) movements of the late-Variscan Pardos Fault.