Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Mineral and textural transformations in mixtures of Al-rich and Al–K-rich clays with firing: Refractory potential of the fired products

  • Laita, E.
  • Bauluz, B.
  • Mayayo, M.J.
  • Yuste, A.
The present work analyses a set of cylinders manufactured by pressing and fired from 1000 °C to 1270 °C, which are composed of pure Al-rich rocks (bauxite) and mixtures of bauxite with Al–K-rich clays. The aim of the study is to determine the mineral and textural transformations that take place in the mixtures with firing and their influence on the physical properties of the final products in order to evaluate their refractory potential by comparing them with various fired commercial bauxites. To this end, raw and fired samples were analysed by X-ray diffraction, X-ray fluorescence, and optical and field emission scanning electron microscopy, and significant physical properties (e.g. density, linear shrinkage, porosity, colour, water absorption, thermal conductivity and point load resistance) were determined in the fired cylinders. The raw bauxite was mainly formed by boehmite, kaolinite and hematite whereas the illite- and kaolinite-rich clay was formed by quartz, illite and kaolinite. Kaolinite, illite and boehmite are not detected at 1000 °C and, from this temperature upwards, mullite, corundum, ¿-Al2O3, hercynite, ilmenite, cristobalite and vitreous phase are formed. Changes in physical properties with rising temperature are associated with the mineralogical changes. The increases in density and linear shrinkage are related to the formation of vitreous phase and the crystallization of mullite, and correlate with the decrease in porosity, water absorption and thermal conductivity. The changes in the colour of the samples are related to the hematite content at each temperature, whereas the point load resistance is greater with higher corundum content. Both the firing temperature and the clay content play an important role in the refractory potential of the mixtures, since samples mixed with illite- and kaolinite-rich clay present similar properties at lower temperatures to those of the fired commercial bauxites.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Weathering events recorded in uppermost Hauterivian-lower Barremian clay-dominated continental successions from the NW Iberian Range: climatic vs. tectonic controls

  • Laita, E.
  • Bauluz, B.
  • Aurell, M.
  • Badenas, B.
  • Yuste, A.
The facies and clay mineral study of clay/marl-rich levels from the Torrelapaja Formation (latest Hauterivian-early Barremian, NW Iberian Range, NE Spain) allowed to establish the palaeoclimatic and palaeoenvironmental conditions under they were generated. The muddy levels and pisoids contained therein of two logs were sampled and studied by X-ray diffraction and optical and electron microscopy. A similar mineralogical upwards trend is recorded in both logs, with a decrease in calcite coupled with an increase in quartz and orthoclase content and constant proportions in goethite, hematite, diaspore, anatase, rutile, ilmenite, and clay mineral content. The lower muddy levels have higher kaolinite content than the upper levels, where illitic phases are the dominant clay minerals. Smectite and intergrowths of illitic phases and kaolinite are also detected upwards. The kaolinite and smectite textures indicate an authigenic origin, whereas the illitic phases are former phases acting as a substrate for kaolinite crystallization. Pisoids mineralogy and texture show an in-situ origin, but some are fractured, indicating reworking processes. The mineral association found in the muddy levels is characteristic of oxisols formed under warm and humid conditions. The upward decrease in kaolinite content is coeval with an increase in the illitic phases and quartz content, related to siliciclastic input, but is also coeval with the presence of authigenic smectite. This indicates a decrease in chemical weathering, not fully registered due to the siliciclastic contribution, which was possibly associated with a change to colder, drier conditions during the latest Hauterivian-early Barremian in the studied area.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

NanoSIMS as an analytical tool for measuring oxygen and hydrogen isotopes in clay minerals from palaeosols: Analytical procedure and preliminary results

  • Laita, Elisa
  • Subirana, Maria Angels
  • Schaumlöffel, Dirk
  • Yuste, Alfonso
  • Bauluz, Blanca
Oxygen and hydrogen isotope composition of neoformed clay minerals is commonly used as a palaeoclimatic proxy. Usually, sediments and rocks (including palaeosols) contain not only neoformed clay minerals, but also detrital and/or diagenetic ones. Together with the usually small size (micro- or nanometric) of the clay minerals in these materials, this can generate difficulties during isotopic analyses by conventional spectrometry. To avoid this problem, we used nanoscale secondary ion mass spectrometry (NanoSIMS) to analyse neoformed clay minerals included in palaeosol levels in early Barremian continental profiles located in NE Spain. The bottom levels of the profiles are rich in kaolinite, whereas the top levels contain smectite (beidellite-type). The isotopic compositions of pure powder standards of kaolinite and beidellite were measured in bulk by conventional mass spectrometry to obtain reference values for calibrating the instrumental mass fractionation. Two common preparation techniques for geological samples were tested (thin sections and thick polished sections), revealing that thin sections are more suitable for NanoSIMS analysis due to their lower resin content. The high spatial resolution of the instrument allowed the elemental mapping of the samples, permitting the localization of the minerals of interest and the measurement of isotopic ratios at selected points (1 x 1 μm2) within the samples. The preliminary isotopic results allowed to distinguish a decrease in the average 18O/16O and D/H ratios from the kaolinite in the bottom levels to the smectite in the top levels, reflecting a change in the climatic conditions. The average δ18O and δD values obtained for kaolinite (δ18OSMOW=18±15‰; δDSMOW=-82±36‰ and δ18OSMOW=14±4‰; δDSMOW=-97±37‰) and smectite (δ18OSMOW=13±14‰; δDSMOW=-167±87‰ and δ18OSMOW=11±6‰; δDSMOW=-180±40‰;), respectively, are consistent with the crystallization of the clays in weathering conditions. Despite the uncertainties of these preliminary isotopic measures, the results obtained allowed to estimate an average temperature for kaolinite formation of 21-22°C, and of 16-17°C for smectite. Given suitable calibration using pure isotopic standards and adequate sample preparation, NanoSIMS can thus have a great applicability in palaeoclimatic studies involving the oxygen and hydrogen isotopic composition of nanometre-sized clay minerals from palaeosols samples.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

The shrews (Soricidae, Mammalia) of the early and middle Pleistocene of Gran Dolina (Atapuerca, Spain): reassessing their paleontological record in the Iberian Peninsula

  • Moya-Costa, R.
  • Cuenca-Bescós, G.
  • Rofes, J.
Soricids are small mammals with a mainly invertebrate diet. They are generally termed insectivores and are part of the mammalian Order Eulipotyphla. Soricids of the Early-Middle Pleistocene postdating the Jaramillo subchron are poorly known in the Iberian Peninsula, except for Dolinasorex glyphodon, endemic to north Spain, and scattered records of Sorex minutus, Crocidura russula, Crocidura kornfeldi and indeterminate species of Crocidura, Sorex and Neomys. This is mainly due to the scarcity of sites and the fragmentary fossil remains. In contrast, the record of soricids in the rest of Europe during this period is wide: there are sites with up to ten different species in the same stratigraphic level. As Gran Dolina (Atapuerca, Spain) provides one of the best anthropological, archaeological and faunal records of the late-Early (post-Jaramillo) to early-Middle Pleistocene, and as this occurs in an excellent, well-studied stratigraphic sequence documenting terrestrial environments, we here undertake an exhaustive revision of 200 fragmentary mandibles of this group of small mammals. Nine soricid taxa were identified in this archaeo-paleontological site: Sorex minutus, Sorex ex gr. runtonensis-subaraneus, Sorex (Drepanosorex) ex gr. margaritodon-savini, Dolinasorex glyphodon, Asoriculus gibberodon, Neomys cf. newtoni, Neomys cf. fodiens, Neomyni cf. Macroneomys and Crocidura kornfeldi. This is the first record of Neomys cf. newtoni in the Iberian Peninsula, the second specimen of Neomyni cf. Macroneomys, and the youngest record of A. gibberodon worldwide. Some of these taxa exhibit particularities when compared to their counterparts in the rest of the continent, adding to the variability of the species. Relict populations of Asoriculus gibberodon endured in the Iberian Peninsula into post-Jaramillo times, even after they had already disappeared from the rest of Europe.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

The Paimogo Dinosaur Egg Clutch Revisited: Using One of Portugal\u2019s Most Notable Fossils to Exhibit the Scientific Method

  • Fernandes, Alexandra E.
  • Mateus, Octávio
  • Bauluz, Blanca
  • Coimbra, Rute
  • Ezquerro, Lope
  • Núñez-Lahuerta, Carmen
  • Suteu, Calin
  • Moreno-Azanza, Miguel
Found in the Upper Jurassic outcrops of Lourinhv£, Portugal, and first published in 1997, the Paimogo dinosaur egg clutch is one of Portugal‚Äôs most remarkable fossils, with over one hundred eggs preserved in association with embryonic bones, of the allosauroid theropod Lourinhanosaurus. However, many questions about it have remained unanswered, even until the present day. After its discovery, this extraordinary fossil became the keystone of a small local museum, greatly kick-starting regional tourism, while also holding the fossils in trust for future generations to study. More than 20¬†years later, continually sustained paleontological interest from the public has even given rise to both a highly successful dinosaur theme park in the region and an aspiring UNESCO Geopark. Recently, a multidisciplinary team of preparators, paleontologists, sedimentologists, mineralogists, and geochemists revisited an unopened jacket from the original excavation using an array of techniques to address various questions. Studies are ongoing, but the corpus of information obtained and the methodologies utilized to gather data have offered an opportunity to design an exhibit around the history of the Paimogo clutch, highlighting the scientific methods involved, and asserting the importance of preserving geological heritage for the future, when new tools will doubtlessly become available to provide yet another new look at old fossils. Here, we describe our analytical procedures and present an innovative exhibit designed to introduce to the public the latest advances on the research behind an iconic piece of Portuguese geoheritage, increasing its value both as a research item and as an educational resource.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Emplacement kinematics of Cisuralian subvolcanic intrusions in the Iberian Chain (NE Spain): new insights from the structural and magnetic study of the Cerro Redondo dacitic intrusion

  • Majarena, U.
  • Pueyo, O.
  • Gil-Imaz, A.
  • Galé, C.
  • Lago, M.
  • Bauluz, B.
  • Rodríguez-Pintó, A.
A combined structural, petrological, and anisotropy of magnetic susceptibility (AMS) study of the Cisuralian (285 ± 2 Ma) Cerro Redondo dacitic intrusion (Iberian Chain, NE Spain) has been conducted to reconstruct its emplacement kinematics and determine its 3D geometry at the outcrop scale. This small igneous body, covering only 0.17 km2, displays a well-defined magmatic foliation that is affected by asymmetrical, steeply plunging folds at different scales. Our multidisciplinary analysis suggests that the Cerro Redondo intrusion formed through the emplacement of successive magma pulses, during which the original magmatic foliations were passively folded. Detailed AMS data reveal a superposition of three kinematic processes recorded in the magnetic fabric, all occurring prior to complete crystallization: the development of an early planar magmatic fabric, localized simple shear deformation, and subsequent folding of the magmatic foliation. This integrated structural, petrological, and AMS study indicates that the Cerro Redondo intrusion is a sub-vertical, asymmetric subvolcanic body, emplaced at upper crustal levels under the control of extensional (or transtensional) movements of the late-Variscan Pardos Fault.