Pasar al contenido principal

ARCILLAS ALUMINICAS: DE LA GENESIS AL RECICLADO DE SUBPRODUCTOS

PID2021-123127OB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE ZARAGOZA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Estudio espectroscópico de lateritas y bauxitas kársticas del Cretácico Inferior de la Serranía de Cuenca (Cordillera Ibérica)

  • Elisa Laita
  • Ángel Santamaría
  • Ángel Santamaría
  • Alfonso Yuste
  • García-Romero, Emilia
  • Mercedes Suárez
En este trabajo se estudia la respuesta espectral de materiales de tipo laterítico y bauxítico que aparecen en la Serranía de Cuenca, en el sector suroccidental de la Cordillera Ibérica. Dichos materiales han sido citados por Meléndez et al., (1989) y Muñoz-García et al., (2012), y su caracterización mineralógica e hipótesis genética han sido realizados por Lorenzo et al., (2025). Las bauxitas estudiadas corresponden a la base de la Fm. Tragacete (Barremiense superior) y se formaron bajo condiciones climáticas subtropicales estacionales (Fregenal-Martínez et al., 2017). La mineralogía habitual de este tipo de depósitos, formada principalmente por hidróxidos de Al y filosilicatos del grupo de las arcillas, hace que resulten de particular interés para su estudio mediante espectroscopía en el visible e infrarrojo cercano y de onda corta (VNIR-SWIR de sus siglas en inglés) ya que, en este intervalo de longitudes de onda ambos grupos de minerales tienen una buena respuesta espectral debido a las absorciones producidas por las vibraciones M-OH, tanto en los hidróxidos como en la capa octaédrica de los minerales arcillosos. El objetivo del trabajo es el estudio de la respuesta espectral de un número significativo de muestras para, posteriormente, poder realizar estudios de campo con un espectrorradiómetro portátil o mediante técnicas remotas. Para ello se han estudiado 24 muestras procedentes de distintos perfiles mediante Difracción de Rayos-X y espectrorradiometría VNIR-SWIR., Esta investigación ha sido financiada por el Ministerio de Ciencia e Innovación (PID2021-123127OB-I00 y PID2023-147226OB-I00) y es parte de la ayuda JDC2022-048348-I financiada por MCIN/AEI/10.13039/501100011033 y por la Unión Europea “NextGenerationEU”/PRTR
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

NanoSIMS as an analytical tool for measuring oxygen and hydrogen isotopes in clay minerals from palaeosols: Analytical procedure and preliminary results

  • Laita, Elisa
  • Subirana, Maria Angels
  • Schaumlöffel, Dirk
  • Yuste, Alfonso
  • Bauluz, Blanca
Oxygen and hydrogen isotope composition of neoformed clay minerals is commonly used as a palaeoclimatic proxy. Usually, sediments and rocks (including palaeosols) contain not only neoformed clay minerals, but also detrital and/or diagenetic ones. Together with the usually small size (micro- or nanometric) of the clay minerals in these materials, this can generate difficulties during isotopic analyses by conventional spectrometry. To avoid this problem, we used nanoscale secondary ion mass spectrometry (NanoSIMS) to analyse neoformed clay minerals included in palaeosol levels in early Barremian continental profiles located in NE Spain. The bottom levels of the profiles are rich in kaolinite, whereas the top levels contain smectite (beidellite-type). The isotopic compositions of pure powder standards of kaolinite and beidellite were measured in bulk by conventional mass spectrometry to obtain reference values for calibrating the instrumental mass fractionation. Two common preparation techniques for geological samples were tested (thin sections and thick polished sections), revealing that thin sections are more suitable for NanoSIMS analysis due to their lower resin content. The high spatial resolution of the instrument allowed the elemental mapping of the samples, permitting the localization of the minerals of interest and the measurement of isotopic ratios at selected points (1 x 1 μm2) within the samples. The preliminary isotopic results allowed to distinguish a decrease in the average 18O/16O and D/H ratios from the kaolinite in the bottom levels to the smectite in the top levels, reflecting a change in the climatic conditions. The average δ18O and δD values obtained for kaolinite (δ18OSMOW=18±15‰; δDSMOW=-82±36‰ and δ18OSMOW=14±4‰; δDSMOW=-97±37‰) and smectite (δ18OSMOW=13±14‰; δDSMOW=-167±87‰ and δ18OSMOW=11±6‰; δDSMOW=-180±40‰;), respectively, are consistent with the crystallization of the clays in weathering conditions. Despite the uncertainties of these preliminary isotopic measures, the results obtained allowed to estimate an average temperature for kaolinite formation of 21-22°C, and of 16-17°C for smectite. Given suitable calibration using pure isotopic standards and adequate sample preparation, NanoSIMS can thus have a great applicability in palaeoclimatic studies involving the oxygen and hydrogen isotopic composition of nanometre-sized clay minerals from palaeosols samples.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

A time-space window between Eocene karst bauxite genesis and the first molasse deposition in the Dinaric Foreland Basin in the North Dalmatia, Croatia

  • Brcic, Vlatko
  • Dunkl, István
  • Mindszenty, Andrea
  • Brlek, Mihovil
  • Trinajstic, Nina
  • Bajo, Petra
  • Bauluz, Blanca
  • Mišur, Ivan
  • Karius, Volker
  • Šuica, Sanja
  • Kukoc, Duje
  • Yuste, Alfonso
  • Laita, Elisa
  • Von Eynatten, Hilmar
  • Zeh, Armin
Karst bauxite deposits in the North Dalmatian piggyback basin (NDPGB) are a part of the Mediterranean bauxite belt, which is the largest European bauxite deposit zone; however, there is a general lack of information regarding the genesis, age, and precursor of the bauxite deposits in this region. In this study, we combined detrital zircon U–Pb geochronology with compositional, mineralogical, and morphological data from four bauxite locations in the NDPGB to provide a new palaeogeographical and palaeoenvironmental evolution model for the Lutetian–Rupelian timeframe of the NDPGB. The Eocene climatic conditions began with the Palaeocene–Eocene Thermal Maximum event (∼56 Ma), followed by the Early Eocene Climatic Optimum (∼49 Ma) and Middle Eocene Climatic Optimum (∼40 Ma), and were completed as a cooling trend culminating around the Eocene/Oligocene boundary (∼34 Ma), with a shift towards an icehouse climate. These events were coeval with the continuous drift of the African continent towards Eurasia and the subsequent closure of the western part of the former Neo-Tethys Ocean associated with massive volcanic activity. Based on the bauxite deposits of the NDPGB, Early Eocene limestones formed in the last phase of the long-lasting Adriatic Carbonate Platform. The Middle Eocene orogenic activity resulted in an elevation in this area. High average temperatures, accelerated hydrological cycles and precipitation, and intensive continental weathering with increased volcanic carbon input resulted in favourable conditions for the development of karst bauxites at this time. Further Upper Eocene tectonic deformation of the NDPGB area resulted in the development of bauxite traps and enabled redeposition of the initial bauxite material. Subsequently, the bauxite deposits were covered with clastic carbonate molasse derived from the intensive erosion of the young Dinaric orogeny. The implications of this study are as follows. First, it provides new information on the timing of bauxitisation in the area by providing the first radiometric zircon geochronology, which refined and restricted the time window for bauxite formation in this region. Additionally, our results provide a new perspective on the possibility of aeolian precursors in karst bauxite formation and provide new constraints on the first tectonic marks of the initial Dinaric orogeny.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

The role of clay minerals in the concentration and distribution of critical metals in lateritic palaeosols from NE Iberia

  • Laita, Elisa
  • Bauluz, Blanca
  • Yuste, Alfonso
The intense chemical weathering processes that lead to the formation of laterites and bauxites result in the enrichment of critical metals (Sc, V, Co, Ga, Ge, Nb, In, Hf, Ta, W, and REEs), which are of great economic interest and are directly involved in the manufacture of various devices essential for the technology transition. This work focuses on combined geochemical and scanning transmission electron microscopy (STEM) studies of lateritic palaeosols developed in continental profiles (Lower Cretaceous, NE Iberia) in order to evaluate the distribution and concentration of critical metals and their possible relationship with weathering processes. In this study, we show that during the process of laterization the highest weathering produces the highest critical metal concentrations (reaching concentrations of 1914.80 ppm in the lateritic palaeosols and 926.30 ppm in the ferruginous macropisoids). Concentrations normalized to the upper continental crust (Taylor and McLennan, 1985) indicate that both the lateritic palaeosols and the macropisoids are enriched in LREEs (256.81 and 223.01 ppm, respectively) and HREEs (107.11and 110.53, respectively). In the lateritic palaeosols, the (La/Sm)c values are higher than those of (Gd/Yb)c, indicating that the LREEs exhibit higher fractionation with weathering, whereas the opposite occurs for the macropisoids, in which the HREEs have higher fractionation. These data indicate that the HREEs are less mobile than the LREEs during laterization. The critical metals present a good positive correlation with Fe, Ti, and Al, but a good negative correlation with K. STEM images and EDS analyses allowed us to identify REE-phases (including monazite, xenotime, and La, Ce and Nd oxides) and nanoparticles of gold adsorbed on the surface of kaolinite crystals. This shows not only that during the laterization process Fe and Ti oxides act as scavengers for the critical metals, but also that kaolinite controls their distribution.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

The Burela Kaolin Deposit (NW Spain): Genesis, Composition and Micro- and Nanotexture

  • Bauluz, Blanca
  • Yuste, Alfonso
  • Alvira, Sergio
  • García-Vicente, Andrea
A set of samples from the Monte Castelo kaolin deposits (Burela, NW Spain), corresponding to igneous acidic rocks affected by chemical weathering with variable intensity have been investigated in order to establish the mineralogical and chemical changes with weathering, and the micro- and nano-scale textures developed. For the study, XRD, FESEM, HRTEM and chemical analyses have been used. The more intense the weathering, the more the dissolution of aluminosilicates (albite, K feldspars and K micas) and the crystallization of kaolinite is favored. Kaolinite grows, forming booklets and generating a fine-grained matrix and, along the cleavages of muscovite, forming mica–kaolinite intergrowths. Bidimensional crystallographic continuity between mica and kaolinite has been observed and no intermediate phases have been identified as a consequence of the high W/R ratio. Kaolin mainly contains kaolinite with high crystallinity; however, when there are quartz impurities, they interfere with the ‘optimal’ reflections for the calculation of the Hinckley index. In this case, the use of the AGFI index almost eliminates the effect that the relative intensities of the quartz and feldspar impurities may have on those of kaolinite. With weathering, there is a progressive decrease in the contents of most chemical elements, except Al, TiO2, HREEs, Ta, Hf, Th, U, V, Cr, S, Zr, Mo and Sn.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

The Effects of Burning Intensity on the Soil C-Related Properties and Mineralogy of Two Contrasting Forest Soils from Chilean National Parks

  • Erazo, Karla
  • Martí-Dalmau, Clara
  • Badía-Villas, David
  • Quintana-Esteras, Silvia
  • Bauluz, Blanca
  • Merino, Carolina
Forest fires alter multiple soil properties, from those related to the carbon cycle to mineralogy; however, the responses of various soils to thermal impact remain unclear. This study examined the impact of fire-induced heating (300, 600, and 900 °C) on the properties of two contrasted soils (Andisol and Inceptisol) with regard to soil organic carbon (SOC), total organic carbon (TOC), dissolved organic carbon (DOC), recalcitrant organic carbon (ROC), soil pH, electrical conductivity (EC), soil water repellency (SWR), soil aggregate stability (SAS), and mineralogy using X-ray diffraction (XRD). SOC and TOC decreased as temperatures increased, with a more pronounced decrease in Andisol (90% loss) than in Inceptisol (80% loss). DOC and SWR peaked at 300 °C but disappeared above 600 °C. Further, ROC increased at 300 °C in both soils, but behaved differently at higher temperatures, remaining stable in Inceptisol and being eliminated in Andisol. Soil pH increased at 600 and 900 °C; meanwhile, EC increased progressively in Andisol but peaked at 300 °C in Inceptisol. SAS remained high in both soils (between 85 and 95%) despite heating. The mineralogical analysis demonstrated how heating induced transformations in iron minerals into more oxidized forms (as hematite and maghemite) in the Andisol, while clay minerals and gibbsite decreased feldspar and quartz accumulation promotion in the Inceptisol. In summary, the initial properties of each soil influenced their respective responses to fire.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Multi-episodic bauxitization in a karstic and rifted setting (Early Cretaceous, South-western Iberian Basin, Spain): An interdisciplinary approach

  • Laita, Elisa
  • Lorenzo, Alejandro
  • De La Horra, Raúl
  • Muñoz-García, María Belén
  • Yuste, Alfonso
  • Bauluz, Blanca
  • Fregenal-Martínez, Marian
Bauxitic deposits serve as valuable sedimentary archives, offering insights into paleoclimatic, paleogeographic, and geodynamic processes over time. A multidisciplinary analysis of bauxitic deposits in the Cuenca Domain (Iberian Ranges, central Spain) aims to reconstruct their genesis in the framework of the geological evolution of this region during the Late Jurassic-Early Cretaceous rift episode. The bauxitic deposits preserve paleosol profiles that show multi-episodic processes of sedimentation, reworking, erosion, pedogenesis, and bauxitization, reflecting a landscape's dynamics that was strongly influenced by episodic tectonic activity. The presence of book-type kaolinite aggregates, ferruginous pisoids and ooids, and soil horizons provide evidence of in situ bauxitization. On the other hand, the presence of fractured pisoids and ooids, brecciated textures, and bauxitic C horizons also points to some degree of reworking. Authigenic boehmite suggests optimal conditions for bauxitization, whereas ferruginous crusts and peds at the top of the deposits point to a later ferruginization phase. A subsequent kaolinitization episode, probably driven by the infiltration of silica-rich fluids, is also recorded. By integrating stratigraphic, sedimentological, and mineralogical data, a succession of genetic stages in bauxite development has been identified, shaped by the tectonic evolution of the area. The proposed stratigraphic and pedogenetic model enhances the regional significance of the findings and enables a refined chronology of its tectonic evolution. The results highlight the potential of bauxitic materials, not only as paleoclimatic indicators but also as robust tools for reconstructing paleogeographic and tectonic conditions in complex settings where the sedimentary record is apparently homogeneous and extremely incomplete.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Abyssal record of the Middle Eocene Climatic Optimum in the Tasman Sea: Insights from benthic foraminiferal and clay mineral assemblages

  • Peñalver-Clavel, Irene
  • Laita, Elisa
  • Dallanave, Edoardo
  • Sutherland, Rupert
  • Dickens, Gerald R.
  • Westerhold, Thomas
  • Bauluz, Blanca
  • Alegret, Laia
The Middle Eocene Climatic Optimum (MECO), a ∼500 kyr global warm interval at ∼40 Ma, interrupted the gradual cooling trend of the mid-late Eocene. Unlike Eocene hyperthermal events with rapid onsets and slow recoveries, the MECO began gradually, ended swiftly, and lacked a global negative carbon isotope excursion, raising questions about warming‑carbon cycling links. Here we report for the first time the response of benthic foraminifera, which are excellent palaeoenvironmental proxies, across the MECO at abyssal depths, integrating our results with a mineralogical analysis of the sediment. International Ocean Discovery Program Site U1511 (Tasman Abyssal Plain, SW Pacific) was deposited below the carbonate compensation depth during the Eocene, and calcareous microfossils are absent. Agglutinated benthic foraminifera indicate a gradual onset of the environmental perturbations associated with the MECO, followed by rapid recovery. Changes in their assemblages, including the temporary disappearance of Lazarus taxa, the decreased abundance of suspension feeders and dominance of opportunistic detritivores, indicate weaker bottom-water currents during MECO and increased stratification of the water column. Mineralogical changes reinforce this interpretation, with increased smectite content indicating warm, humid conditions in the source-area, and possibly a change in the deep-water source. The reappearance of Lazarus taxa after the MECO indicates rapid recovery of deep-sea environmental conditions. The comparison of Site U1511 with available studies from other regions reveals the complex and regionally diverse nature of benthic foraminiferal response to the MECO, emphasizing the critical role of ocean circulation and palaeogeography during Eocene warm intervals.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Exploring Lower Cretaceous Karst Bauxite from South-Central Pyrenean Unit (NE Spain): Genesis and Ceramic Potential

  • Yuste, Alfonso
  • Bauluz, Blanca
  • Laita, Elisa
This study investigates a karst bauxite deposit from NE Spain with a dual objective incorporating the novel aspect of directly linking genetic processes to industrial ceramic performance. First, the bauxite is mineralogically and texturally characterized using X-ray diffraction and field emission scanning electron microscopy. Second, the mineralogical and textural transformations of the bauxite during firing at 1000, 1200 and 1300 °C are analyzed, together with their effects on the physical properties of the fired products. The Lower Cretaceous bauxite is autochthonous, shows a pisolithic structure, and formed in situ under tropical monsoon conditions through intense chemical weathering involving dissolution–crystallization processes. For ceramic testing, the bauxite was mixed with illitic–kaolinitic clays in a 90/10 proportion. During firing, kaolinite and illite destabilize and transform into mullite, initially by solid-state reactions at 1000 °C and subsequently by crystallization from a vitreous phase at higher temperatures, producing larger crystals and composition closer to the empirical mullite formula. The formation of vitreous phase and mullite leads to reduced porosity and increased density and linear shrinkage, particularly between 1000 and 1200 °C. Specimens fired at 1300 °C show higher mechanical strength, related to higher mullite content and a larger size of its crystals. The results demonstrate the potential interest of these bauxites for ceramic manufacturing.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

First oxygen isotopic data of coexisting glauconite and celadonite by NanoSIMS

  • Laita, Elisa
  • Subirana, Maria Àngels
  • Schaumlöffel, Dirk
  • Reolid, Matías
  • Abad, Isabel
  • Nieto, Fernando
  • Bauluz, Blanca
This study presents the first nanoscale secondary ion mass spectrometry (NanoSIMS) oxygen isotopic analyses in coexisting glauconite and celadonite related to hydrothermal alteration of Jurassic pillow-lavas from the Subbetic (Betic Cordillera, South Spain). The slight differences in Fe and K content of these two micas allowed them to be differentiated by focused ion beam scanning electron microscopy (FIB-SEM) and extract them as separate 10 × 5 μm size and 1 μm thick lamellae of each mineral. This sample preparation eliminated the need of preliminary elemental mapping by NanoSIMS to identify the different minerals within the sample before the isotopic mapping. However, the small thickness of the studied lamellae caused their fast consumption during oxygen isotopic mapping. Together with the H-isotope fractionation that micas can undergo during heating and dehydroxylation this could prevent the later acquisition of deuterium measurements. NanoSIMS reported an average 18O/16O ratio for glauconite of 2.05 × 10−3 (±1.14 × 10−5), whereas the average ratio for celadonite was 2.02 × 10−3 (±1.43 × 10−5). The δ18OSMOW values obtained separately for glauconite (29 ‰ ±6) and celadonite (18 ‰ ±6), despite the standard deviations, demonstrate that NanoSIMS could be applicable for analysing the oxygen isotopic composition of coexisting small-size clay minerals within the same sample. According to these preliminary results, the studied glauconite and celadonite could have a partial overlap in their formation conditions, with celadonite beginning to crystallise just as glauconite crystallisation finishes.