RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación
Artículo científico (JournalArticle)
Rapid Laser-Based Deposition of PbI2/CsBr Inorganic Scaffolds for Hybrid Fabrication of Perovskite/Silicon Tandem Solar Cells
[EN] Rapid dry deposition of metal halide perovskites and inorganic scaffolds remains a key challenge for scalable vapor-phase fabrication. Here, we demonstrate fast vapor-phase growth of PbI2/CsBr inorganic scaffolds from a single composite target using pulsed laser deposition. Deposition rates exceeding 100 nm min-1, over an order of magnitude higher than comparable co-evaporated scaffolds, enable the deposition of similar to 540 nm-thick PbI2/CsBr inorganic scaffolds on textured silicon cells within 5 min. The PbI2/CsBr ratio is moreover maintained from the source target to the film, and the process delivers high material utilization. Proof-of-concept 1 cm2 fully textured perovskite/silicon tandem cells are demonstrated with the rapid PLD scaffolds converted with an organohalide solution to perovskite absorbers and passivated with piperazinium iodide. The material and device characterization demonstrates that laser-based vapor deposition is a promising route for rapid inorganic scaffold fabrication., This project was funded by the European Research Council
(ERC) under the European Union s Horizon 2020 Research
and Innovation Program (CREATE, Grant Agreement
No.852722), received by M.M.M., and the SolarLab within
SolarNL, a national research, innovation and industrial
development program funded by The Netherlands National
Growth Fund. S.K., M.M.M., K.A., and C.M.W. acknowledge
additional funding from the European Union s Horizon 2020
Research and Innovation Program (VIPERLAB, Grant No.
101006715, VLAB-234-00137). K.A. and C.M.W. further
acknowledge funding from the Swiss State Secretariat for
Education, Research and Innovation (SERI) (TRIUMPH,
101075725), the Swiss National Science Foundation (Radicals,
CRSII5_216647), the Swiss Federal Office of Energy
(PRESTO, PERSISTARS, BESTOBOT), and the ETH Domain through an AM grant (AMYS). P.P.B. and M.M.A.
acknowledge support from the predoctoral contract PRE2021-
099951, funded by MCIN/AEI/10.13039/501100011033
within the project PID2020-119628RB-C31.
Proyecto:
Agencia Estatal de Investigación / Plan Estatal de Investigación Científica y Técnica y de Innovación 2017-2020 PID2020-119628RB-C31
,
European Commission / H2020 101006715
,
European Commission / H2020 852722
,
European Commission / HE 101075725
,
Swiss National Science Foundation CRSII5_216647
,
Ministerio de Ciencia e Innovación PRE2021-099951