Pasar al contenido principal

PEROVSKITAS DE METAL HALURO: NUEVAS ESTRUCTURAS PARA NUEVOS RETOS

PRE2021-099951

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Desarrollar, Atraer y Retener Talento
Subprograma Subprograma Estatal de Formación
Convocatoria Contratos Predoctorales
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Rapid Laser-Based Deposition of PbI2/CsBr Inorganic Scaffolds for Hybrid Fabrication of Perovskite/Silicon Tandem Solar Cells

  • Kralj, Suzana
  • Artuk, Kerem
  • Nales, Marly
  • Hnapovskyi, Vladyslav
  • Minguez-Avellan, Miriam
  • Vishal, Badri
  • Said, Ahmed Ali
  • De Wolf, Stefaan
  • Wolff, Christian M.
  • Morales-Masis, Monica
  • Boix, Pablo P.|||0000-0001-9518-7549
[EN] Rapid dry deposition of metal halide perovskites and inorganic scaffolds remains a key challenge for scalable vapor-phase fabrication. Here, we demonstrate fast vapor-phase growth of PbI2/CsBr inorganic scaffolds from a single composite target using pulsed laser deposition. Deposition rates exceeding 100 nm min-1, over an order of magnitude higher than comparable co-evaporated scaffolds, enable the deposition of similar to 540 nm-thick PbI2/CsBr inorganic scaffolds on textured silicon cells within 5 min. The PbI2/CsBr ratio is moreover maintained from the source target to the film, and the process delivers high material utilization. Proof-of-concept 1 cm2 fully textured perovskite/silicon tandem cells are demonstrated with the rapid PLD scaffolds converted with an organohalide solution to perovskite absorbers and passivated with piperazinium iodide. The material and device characterization demonstrates that laser-based vapor deposition is a promising route for rapid inorganic scaffold fabrication., This project was funded by the European Research Council (ERC) under the European Union s Horizon 2020 Research and Innovation Program (CREATE, Grant Agreement No.852722), received by M.M.M., and the SolarLab within SolarNL, a national research, innovation and industrial development program funded by The Netherlands National Growth Fund. S.K., M.M.M., K.A., and C.M.W. acknowledge additional funding from the European Union s Horizon 2020 Research and Innovation Program (VIPERLAB, Grant No. 101006715, VLAB-234-00137). K.A. and C.M.W. further acknowledge funding from the Swiss State Secretariat for Education, Research and Innovation (SERI) (TRIUMPH, 101075725), the Swiss National Science Foundation (Radicals, CRSII5_216647), the Swiss Federal Office of Energy (PRESTO, PERSISTARS, BESTOBOT), and the ETH Domain through an AM grant (AMYS). P.P.B. and M.M.A. acknowledge support from the predoctoral contract PRE2021- 099951, funded by MCIN/AEI/10.13039/501100011033 within the project PID2020-119628RB-C31.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Triiodide Faujasites With Reactive, Ionic, Antimicrobial, and Catalytic Applications

  • Mingueza-Verdejo, Paloma
  • Minguez-Avellan, Miriam
  • Hernandez-Garrido, Juan C.
  • Balaguer-Grau, Adrián
  • Boix, Pablo P.|||0000-0001-9518-7549
  • Oliver-Meseguer, Judit|||0000-0003-1555-3583
  • Leyva Perez, Antonio|||0000-0003-1063-5811
[EN] Zeolites are microporous materials widely used in industry for hosting and exchanging molecules and cations, but the inclusion of anions is severely limited by the anionic nature of the zeolitic framework. Here, we show that commercially available alkyl iodides and faujasite zeolites (one of the representative zeolite families) react in a tandem dehydroiodination-oxidation process under open-air reaction conditions, to give triiodide anions (I3 -) inside the faujasite (I3 -@faujasite), after releasing the corresponding alkene of the alkyl iodide and water as only by-products. This clean postsynthetic solid reaction does not employ any additive, solvent, or protecting atmosphere and can be carried out in multigram scale, to obtain up to approximate to 25 wt% I3 - loadings inside the zeolites, bench stable for months. The I3 -@faujasites are studied here as water disinfection agents, bacteria and yeast antiseptics, solid electrolytes, and catalytic solids, and, in many cases, outperform the activity of the state-of-the-art materials for each application. Besides, the densely packaged I3 -@NaX does not disaggregate into hydrofluoric acid, which allows the stability of this zeolite in strong acidic media. This conceptually different anion incorporation methodology in faujasites open new avenues to the design of anion-containing microporous zeolitic materials, with controlled release if desired, for a wide variety of applications., This study was supported by the Ministerio de Ciencia, Innovacion y Universidades (PID2023-148441NB-I00, CEX2021-001230-S, RYC2022-036154-I, PRE2021-099951, PID2020-119628RB-C31) and Universitat Politecnica de Valencia (PAID 01-20).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Perovskite Nanocomposite: A Step Toward Photocatalytic Degradation of Organic Dyes

  • Minguez-Avellan, Miriam
  • Farinós-Navajas, Noemí
  • Noguera-Gómez, Jaume
  • Sagra Rodríguez,Victor
  • Vallés-Pelarda, Marta
  • Momblona, Cristina
  • Ripolles, Teresa S.
  • Abargues, Rafael
  • Boix, Pablo P.|||0000-0001-9518-7549
[EN] Metal halide perovskites offer a promising opportunity for transforming solar energy into chemical energy, thereby addressing pressing environmental challenges. While their excellent optoelectronic properties have been successfully applied in photovoltaics, their potential in photocatalysis remains relatively unexplored. Herein, we report a novel humidity-driven approach for the in situ synthesis of MAPbI3 nanocrystals (NCs) within a nickel acetate matrix, forming a nanocomposite thin film that enhances the system's stability and enables its use in photochemical reactions. UV-Vis spectroscopy and X-ray diffraction confirm the rapid and effective synthesis of NCs within the matrix after 1 min at 80% relative humidity (RH). Optimal photoconversion conditions are attained after 60 min of exposure at 80% RH, due to the increased porosity and nanocrystal size over time as revealed by electron microscopy. The MAPbI3-Ni(AcO)2 nanocomposite exhibits superior photocatalytic activity compared to standard polycrystalline MAPbI3 films for the decomposition of Sudan III under simulated sunlight. Furthermore, the nanocomposite demonstrates good recyclability over multiple cycles. Overall, this work highlights the potential of MHP-based nanocomposites for solar-driven catalytic systems in pollution mitigation.; This study presents a humidity-driven approach for synthesizing MAPbI3 nanocrystals within a nickel acetate matrix, forming a stable nanocomposite thin film. The MAPbI3-Ni(AcO)2 nanocomposite exhibits superior photocatalytic activity recyclability to degrade Sudan III, a dye model molecule, showing potential for solar-driven pollution mitigation.image (c) 2024 WILEY-VCH GmbH, We acknowledge the support of the Spanish MINECO through the project Nirvana (grant no. PID2020-119628RB-C31) by MCIN/AEI/10.13039/501100011033 and project Luminova (PDC2023-145936-I00) by MCIN/AEI/10.13039/501100011033 and Next GenerationEU/PRTR. Also, P.P.B. and T.S.R. acknowledge the financial support of Generalitat Valenciana through the CIDEGENT contracts (ref: CIDEGENT/2022/34 and CIDEGENT/2021/044). M.M.-A. acknowledges her predoctoral contract with reference PRE2021-099951 funded by MCIN/AEI/ 10.13039/501100011033 as part of the project PID2020-119628RB-C31. N.F.-N was supported by a predoctoral contract with reference CPI-23-488. J.N.G. acknowledges his FPU PhD contract with reference FPU19/04544. V.S.R. was supported by the predoctoral contract with reference CPI-22-810. M.V.-P. was supported by the "Margarita Salas" postdoctoral contract MGS/2022/16/(UP2021-021) financed by the European Union-NextGenerationEU. C.M. acknowledges the funding from the "Contratacion de personal investigador doctor con experiencia internacional CDEIGENT" (ref CDEIGENT/2021/2022) from the Conselleria de Innovacion, Universidades, Ciencia y Sociedad Digital de la Generalitat Valenciana, Spain.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Perovskite nanocomposite: A step toward photocatalytic degradation of organic dyes

  • Minguez-Avellan, Miriam
  • Farinós-Navajas, Noemi
  • Noguera-Gómez, Jaume
  • Sagra Rodríguez, Víctor
  • Vallés-Pelarda, Marta
  • Momblona, Cristina
  • Ripolles, Teresa S.
  • Boix, Pablo P.
  • Abargues, Rafael
Metal halide perovskites offer a promising opportunity for transforming solar energy into chemical energy, thereby addressing pressing environmental challenges. While their excellent optoelectronic properties have been successfully applied in photovoltaics, their potential in photocatalysis remains relatively unexplored. Herein, we report a novel humidity-driven approach for the in situ synthesis of MAPbI3 nanocrystals (NCs) within a nickel acetate matrix, forming a nanocomposite thin film that enhances the system's stability and enables its use in photochemical reactions. UV-Vis spectroscopy and X-ray diffraction confirm the rapid and effective synthesis of NCs within the matrix after 1 min at 80% relative humidity (RH). Optimal photoconversion conditions are attained after 60 min of exposure at 80% RH, due to the increased porosity and nanocrystal size over time as revealed by electron microscopy. The MAPbI3-Ni(AcO)2 nanocomposite exhibits superior photocatalytic activity compared to standard polycrystalline MAPbI3 films for the decomposition of Sudan III under simulated sunlight. Furthermore, the nanocomposite demonstrates good recyclability over multiple cycles. Overall, this work highlights the potential of MHP-based nanocomposites for solar-driven catalytic systems in pollution mitigation., We acknowledge the support of the Spanish MINECO through the project Nirvana (grant no. PID2020-119628RB-C31) by MCIN/AEI/10.13039/501100011033 and project Luminova (PDC2023-145936-I00) by MCIN/AEI/10.13039/501100011033 and Next GenerationEU/PRTR. Also, P.P.B. and T.S.R. acknowledge the financial support of Generalitat Valenciana through the CIDEGENT contracts (ref: CIDEGENT/2022/34 and CIDEGENT/2021/044). M.M.-A. acknowledges her predoctoral contract with reference PRE2021-099951 funded by MCIN/AEI/ 10.13039/501100011033 as part of the project PID2020-119628RB-C31. N.F.-N was supported by a predoctoral contract with reference CPI-23-488. J.N.G. acknowledges his FPU PhD contract with reference FPU19/04544. V.S.R. was supported by the predoctoral contract with reference CPI-22-810. M.V.-P. was supported by the “Margarita Salas” postdoctoral contract MGS/2022/16/(UP2021-021) financed by the European Union-NextGenerationEU. C.M. acknowledges the funding from the “Contratación de personal investigador doctor con experiencia internacional CDEIGENT” (ref CDEIGENT/2021/2022) from the Consellería de Innovación, Universidades, Ciencia y Sociedad Digital de la Generalitat Valenciana, Spain., Peer reviewed