Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 12
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

The concentration of nickel and cobalt from Agios Ioannis laterites by multi gravity separator

  • Eljoudiani, Amina
  • Medeiros Veras, Moacir
  • Hoffmann Sampaio, Carlos|||0000-0001-5840-1614
  • Oliva Moncunill, Josep|||0000-0001-6214-5713
  • Tampouris, Stylianos
  • Cortina Pallás, José Luis|||0000-0002-3719-5118
Asbolane represents a strategic secondary source of cobalt (Co) and manganese (Mn), both of which are essential for the production of high-performance alloys and batteries. In order to conserve high-grade resources, it is crucial to improve the utilization of low-grade ores, which typically contain 1.2% Co and ~14.7% Mn. However, the fine grinding required for these ores poses significant challenges for conventional gravity separation. This study hypothesizes that the Multi Gravity Separator (MGS) can effectively process finely disseminated asbolane ore associated with various gangue minerals. The research was conducted by testing two size fractions (-100 +50 µm and -50 µm from Agios Ioannis laterite in Greece) at the UPC/Bases Manresa Mineral Processing Laboratory, with the primary focus being the optimization of drum speed, Tilt L angle, and wash water flow. The aim of the study was to determine the impact of these three critical variables on the grade, recovery, and separation efficiency of the ore. The analysis was further enhanced by the implementation of response surface methodology (MGS) utilizing Python design. The findings suggest that it is feasible to enhance low-grade asbolane ore from a feed containing 2.6% Co and 32.5%, achieving an acceptable recovery of 82.1%. The optimization of process variables was conducted for each response, with the optimization of each response being conducted independently of the other responses. Further optimization of the variables was carried out with a multi-objective target, demonstrating its potential for efficient recovery from complex, low-grade ores while reducing overgrinding energy loss., The authors thank the company GMMSA Larco for the samples provided. This work was supported by the METALLICO project and by the development of upcycling approaches in the agri-food and process industries to promote on-site and sustainable chemicals production (Upcycling) project (PID2023-147160OB-C21), financed by the Spanish Research Agency (Agencia Estatal de Investigación, AEI)., This research was funded by the following project: 101091682-Metallico-HORIZON-CL4-2022-RESILIENCE-01., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Technological characterization of cobalt and nickel ores from Greece for metal recovery

  • Eljoudiani, Amina
  • Hoffmann Sampaio, Carlos|||0000-0001-5840-1614
  • Oliva Moncunill, Josep|||0000-0001-6214-5713
  • Veras, Moacir Medeiros
  • Alfonso Abella, María Pura|||0000-0002-1515-4999
  • Anticoi Sudzuki, Hernán Francisco|||0000-0003-4316-5203
  • Tampouris, Stylianos
  • Cortina Pallás, José Luis|||0000-0002-3719-5118
  • Escalante Salcedo, Percy Rodrigo|||0009-0000-2890-1335
Greece has mineral resources in which strategic elements such as nickel (Ni) and cobalt (Co) are present. In this study, characterizations of the metal concentrations of three laterite deposits, as well as minerals from a kiln originating from a mineral processing plant, were carried out. The aim of this research was to integrate technological characterization data on the quantities of cobalt (Co) and nickel (Ni) present in the lateritic profiles of three mineral deposits from Greece and in kiln dust. The study was conducted at the Mineral Processing Laboratory of UPC/Bases Manresa. Aliquots were constituted for particle-size distribution tests by wet sieving followed by laser granulometry. Scanning electron microscopy (SEM) was used to determine the mineralogical compositions. Sink–float tests were conducted to estimate the particle liberation. Mineral liberation analysis (MLA) was performed to understand the liberation and the association of minerals in the samples., This research was funded by the following project: 101091682-Metallico-HORIZON-CL4-2022-RESILIENCE-01., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Characterization of Tharsis mine tailings for ore reprocessing for potential critical materials recovery

  • Ochoa Freire, Gladys Alfonsina|||0009-0002-6191-0238
  • Alfonso Abella, María Pura|||0000-0002-1515-4999
  • Escalante Salcedo, Percy Rodrigo|||0009-0000-2890-1335
  • Medeiros Veras, Moacir
  • Hoffmann Sampaio, Carlos|||0000-0001-5840-1614
  • Oliva Moncunill, Josep|||0000-0001-6214-5713
  • Cortina Pallás, José Luis|||0000-0002-3719-5118
  • Hernández, Ana Belén
  • Sevilla, Manuel
This study characterizes and evaluates the potential recovery of metals from tailings of the Tharsis mine (Huelva, Spain), with a focus on critical raw materials (CRMs) essential for the energy transition. These tailings, generated during past sulfuric acid production from pyrite concentrates, are highly homogeneous, with over 40 % of particles finer than 60 µm. Chemical analyses revealed a uniform distribution of elements such as Cu (0,35 %), Zn (1,06 %), Pb (0,10 %), Co (244 ppm), and Ag (49 ppm), while Sb showed enrichment in finer fractions. Mineralogical results identified pyrite and quartz as the dominant phases across all size ranges. Quantitative mineralogy using the Advanced Mineral Identification and Characterization System (AMICS) and Mineral Liberation Analysis (MLA) confirmed that more than 90 % pyrite is liberated under 60 µm, which suggests strong potential for recovery through gravity concentration using multi-method approaches, including multi-gravity separation (MGS), air jet concentrators, and centrifugal jigs. In addition to exploring fiscal-chemical concentration techniques, such as froth flotation, where grinding to +75–200 µm was identified as the optimal size range for pyrite and quartz liberation, improving flotation performance. The results demonstrate that CRMs can be more sustainably recovered from secondary resources such as mine tailings. In contrast to previous studies, which have mainly focused on leaching, this work emphasizes the efficiency of pre-concentration methods for CRM recovery, thereby reducing the environmental risks associated with hazardous elements. Potential applications of recovered products include batteries, cement, paints, and ceramics, thereby supporting industrial supply chains while contributing to circular economy strategies., This research was supported by This research and was funded by the following project: 101091682-Metallico-HORIZON-CL4-2022-RESILIENCE-01 and by the Spanish Research Agency (AEI) through the project “Development of upcycling approaches in the agri‐food and process industries to promote on-site and sustainable chemicals production (UPCYCLING)” project PID2023-147160OB-C21. Moreover, this work was carried out within the framework of the Multiscale Center of Excellence, funded by the Marí a de Maeztu Program for Units of Excellence (CEX2023-001300-M), supported by MCIN/AEI/Ministerio de Universidades, Spain and the Catalan Government through the Riis research group (2021-SGR-GRC-01041) and the R2EM group (2021-SGR-GRC-00596). Support for the research of J.L. Cortina was also received through the “ICREA Academia” recognition for excellence in research funded by the Generalitat de Catalunya. The authors also acknowledge Minera Los Frailes for providing the AMW samples for performing the experimental work., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Pyrite concentration and associated polymetallic minerals from the Iberian Pyrite Belt through the multi-gravity separator

  • Eljoudiani, Amina
  • Medeiros Veras, Moacir
  • Hoffmann Sampaio, Carlos|||0000-0001-5840-1614
  • Oliva Moncunill, Josep|||0000-0001-6214-5713
  • Cortina Pallás, José Luis|||0000-0002-3719-5118
Waste deposits from the Iberian Pyrite Belt that are rich in pyrite are a valuable secondary resource for getting back sulphide minerals and important metals that go with them. This study assessed the efficacy of a Multi-Gravity Separator (MGS) in concentrating pyrite and related polymetallic minerals from sulphide waste material sourced from the Alonso mining district (Huelva, Spain). Bench-scale MGS tests were done on two particle size fractions (-500 µm and -50 µm) to see how the speed of the drum rotation, the angle of the tilt, and the flow rate of the wash water affected the separation efficiency. Mineral Liberation Analysis (MLA) showed that both size fractions had about 65.8 wt% pyrite, but the -50 µm fraction was much more liberated. Under the best operating conditions, the MGS was able to recover about 58% of the pyrite from the -500 µm fraction and about 64% from the -50 µm fraction. The mass recoveries were about 38% and 42%, respectively. There was also a better recovery of related metals like Co, Cu, Zn, and Mn, especially for the finer fraction. This shows the improvement of the liberation and stratification behaviour. The results show that MGS is a good way to pre-concentrate fine-grained pyrite-rich waste. The performance is heavily influenced by the size distribution of the particles and the operating parameters. These results suggest that improvements in gravity separation may offer a long-term pathway for the recycling of sulphide mine waste within a circular economy., This work was supported by the METALLICO (GAN 101091682) EU Project and by the Upcycling project (PID2023-147160OB-C21), financed by the Spanish Research Agency (AEI). This work is part of the María de Maeztu Unit of Excellence Programme CEX2023-001300-M funded by MICIU/AEI/10.13039/501100011033 and the Catalan Government through the R2EM group (2021-SGR-GRC-00596). Support for the research of J.L. Cortina was also received through the “ICREA Academia” recognition for excellence in research funded by the Generalitat de Catalunya. Finally, M. Sevilla and A. B. Hernandez from Tharsis Mining S.L. (Huelva, Spain) are acknowledged for mineral samples selection, collection and supply as well for their helpful discussions., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

MLA-based characterization of fine iron sulfide particles and implications for critical metal recoveries

  • Escalante Salcedo, Percy Rodrigo|||0009-0000-2890-1335
  • Oliva Moncunill, Josep|||0000-0001-6214-5713
  • Anticoi Sudzuki, Hernán Francisco|||0000-0003-4316-5203
  • Hoffmann Sampaio, Carlos|||0000-0001-5840-1614
  • Ochoa Freire, Gladys Alfonsina|||0009-0002-6191-0238
  • Cortina Pallás, José Luis|||0000-0002-3719-5118
Mineral Liberation Analysis (MLA) was applied to characterize a massive iron sulfide ore (FeS2) with the aim of assessing the recovery potential of critical metals, including copper, cobalt, zinc and manganese, in fine particles (<100 µm). The study focuses on particle attributes relevant to froth flotation, emphasizing the role of size, shape and mineral liberation. The results indicate a predominantly moderate recovery potential, with most recoveries ranging from 40 wt% to 70 wt%, associated with increased free surface area of mineral particles. Quantitative shape analysis reveals that particles with lower circularity and slightly elongated morphologies exhibit more favorable flotation behavior. These findings highlight the importance of detailed particle-scale characterization for understanding and optimizing the processing response of fine-grained, low-grade sulfide ores, contributing to improved flotation performance through a structure–property–process approach., The authors would like to thank the financial support provided by the METALLICO HE project (GA: 101091682) and by the Spanish Research Agency (AEI) through the UPCYCLING project PID2023-147160OB-C21. Moreover, this work is part of Maria de Maeztu Units of Excellence Programme CEX2023-001300-M / funded by MICIU/AEI /10.13039/501100011033, and the Catalan Government through the Riis research group (2021SGR-GRC-01041) and the R2EM group (2021- SGR-GRC-00596). Support for the research of J.L. Cortina was also received through the “ICREA Academia” recognition for excellence in research funded by the Generalitat de Catalunya. The authors also acknowledge Tharsis Mining for providing the samples for performing the experimental work., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Evaluation of pyrite recovery via bench-scale froth flotation from a sulfide ore deposit in southwestern Spain

  • Eljoudiani, Amina
  • Medeiros Veras, Moacir
  • Hoffmann Sampaio, Carlos|||0000-0001-5840-1614
  • Oliva Moncunill, Josep|||0000-0001-6214-5713
  • Cortina Pallás, José Luis|||0000-0002-3719-5118
In recent decades, there has been an upsurge in focus on the extraction of pyrite from sulfide ore deposits due to its vital role in the process of metal extraction and environmental management. This study explores the flotation behavior of pyrite in sulfide ores using mechanical-cell flotation. This study compared the performance of two commonly used flotation collectors, potassium butyl xanthate (KXT) and diethyl dithiophosphate (DTP), in the beneficiation of a sulfide ore from southwestern Spain. Statistical analysis performed using MiniTab 4.0 revealed that collector type, reagent dosage, and pulp pH were the principal factors affecting pyrite recovery. Under the tested conditions, KXT exhibited superior metallurgical performance and selectivity compared with DTP. The flotation kinetics demonstrate that the chemical was more efficacious throughout both the rougher and cleaner phases of the process. The findings robustly corroborate the notion that employing xanthate-based chemicals to enhance pyrite concentration facilitates metal extraction from the Sulfide Ore Deposit in southwestern Spain. The study sets out a basis for process growth, and it is proposed that further research be conducted under industrial water conditions to validate the findings., This work was supported by the METALLICO (GAN 101091682) EU project and by the Upcycling project (PID2023-147160OB-C21), financed by the Spanish Research Agency (AEI). Moreover, this work was carried out within the framework of the Multiscale Center of Excellence, funded by the María de Maeztu Program for Units of Excellence (CEX2023-001300-M), supported by MCIN/AEI/Ministerio de Universidades, Spain and the Catalan Government through the R2EM group (2021-SGR-GRC-00596). Support for the research of J.L. Cortina was also received through the “ICREA Academia” recognition for excellence in research funded by the Generalitat de Catalunya. Finally, M. Sevilla and A. B. Hernández from Tharsis Mining S.L. (Huelva, Spain) are strongly acknowledged for mineral samples selection, collection and supply as well by their helpful discussions., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Pyrite concentration and associated polymetallic minerals from the Iberian Pyrite Belt through the multi-gravity separator

  • Eljoudiani, Amina
  • Medeiros Veras, Moacir
  • Hoffmann Sampaio, Carlos
  • Oliva Moncunill, Josep
  • Cortina Pallás, José Luis
Waste deposits from the Iberian Pyrite Belt that are rich in pyrite are a valuable secondary resource for getting back sulphide minerals and important metals that go with them. This study assessed the efficacy of a Multi-Gravity Separator (MGS) in concentrating pyrite and related polymetallic minerals from sulphide waste material sourced from the Alonso mining district (Huelva, Spain). Bench-scale MGS tests were done on two particle size fractions (-500 µm and -50 µm) to see how the speed of the drum rotation, the angle of the tilt, and the flow rate of the wash water affected the separation efficiency. Mineral Liberation Analysis (MLA) showed that both size fractions had about 65.8 wt% pyrite, but the -50 µm fraction was much more liberated. Under the best operating conditions, the MGS was able to recover about 58% of the pyrite from the -500 µm fraction and about 64% from the -50 µm fraction. The mass recoveries were about 38% and 42%, respectively. There was also a better recovery of related metals like Co, Cu, Zn, and Mn, especially for the finer fraction. This shows the improvement of the liberation and stratification behaviour. The results show that MGS is a good way to pre-concentrate fine-grained pyrite-rich waste. The performance is heavily influenced by the size distribution of the particles and the operating parameters. These results suggest that improvements in gravity separation may offer a long-term pathway for the recycling of sulphide mine waste within a circular economy., This work was supported by the METALLICO (GAN 101091682) EU Project and by the Upcycling project (PID2023-147160OB-C21), financed by the Spanish Research Agency (AEI). This work is part of the María de Maeztu Unit of Excellence Programme CEX2023-001300-M funded by MICIU/AEI/10.13039/501100011033 and the Catalan Government through the R2EM group (2021-SGR-GRC-00596). Support for the research of J.L. Cortina was also received through the “ICREA Academia” recognition for excellence in research funded by the Generalitat de Catalunya. Finally, M. Sevilla and A. B. Hernandez from Tharsis Mining S.L. (Huelva, Spain) are acknowledged for mineral samples selection, collection and supply as well for their helpful discussions., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Characterization of Tharsis mine tailings for ore reprocessing for potential critical materials recovery

  • Ochoa Freire, Gladys Alfonsina
  • Alfonso Abella, María Pura
  • Escalante Salcedo, Percy Rodrigo
  • Medeiros Veras, Moacir
  • Hoffmann Sampaio, Carlos
  • Oliva Moncunill, Josep
  • Cortina Pallás, José Luis
  • Hernández, Ana Belén
  • Sevilla, Manuel
This study characterizes and evaluates the potential recovery of metals from tailings of the Tharsis mine (Huelva, Spain), with a focus on critical raw materials (CRMs) essential for the energy transition. These tailings, generated during past sulfuric acid production from pyrite concentrates, are highly homogeneous, with over 40 % of particles finer than 60 µm. Chemical analyses revealed a uniform distribution of elements such as Cu (0,35 %), Zn (1,06 %), Pb (0,10 %), Co (244 ppm), and Ag (49 ppm), while Sb showed enrichment in finer fractions. Mineralogical results identified pyrite and quartz as the dominant phases across all size ranges. Quantitative mineralogy using the Advanced Mineral Identification and Characterization System (AMICS) and Mineral Liberation Analysis (MLA) confirmed that more than 90 % pyrite is liberated under 60 µm, which suggests strong potential for recovery through gravity concentration using multi-method approaches, including multi-gravity separation (MGS), air jet concentrators, and centrifugal jigs. In addition to exploring fiscal-chemical concentration techniques, such as froth flotation, where grinding to +75–200 µm was identified as the optimal size range for pyrite and quartz liberation, improving flotation performance. The results demonstrate that CRMs can be more sustainably recovered from secondary resources such as mine tailings. In contrast to previous studies, which have mainly focused on leaching, this work emphasizes the efficiency of pre-concentration methods for CRM recovery, thereby reducing the environmental risks associated with hazardous elements. Potential applications of recovered products include batteries, cement, paints, and ceramics, thereby supporting industrial supply chains while contributing to circular economy strategies., This research was supported by This research and was funded by the following project: 101091682-Metallico-HORIZON-CL4-2022-RESILIENCE-01 and by the Spanish Research Agency (AEI) through the project “Development of upcycling approaches in the agri‐food and process industries to promote on-site and sustainable chemicals production (UPCYCLING)” project PID2023-147160OB-C21. Moreover, this work was carried out within the framework of the Multiscale Center of Excellence, funded by the Marí a de Maeztu Program for Units of Excellence (CEX2023-001300-M), supported by MCIN/AEI/Ministerio de Universidades, Spain and the Catalan Government through the Riis research group (2021-SGR-GRC-01041) and the R2EM group (2021-SGR-GRC-00596). Support for the research of J.L. Cortina was also received through the “ICREA Academia” recognition for excellence in research funded by the Generalitat de Catalunya. The authors also acknowledge Minera Los Frailes for providing the AMW samples for performing the experimental work., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

MLA-based characterization of fine iron sulfide particles and implications for critical metal recoveries

  • Escalante Salcedo, Percy Rodrigo
  • Oliva Moncunill, Josep
  • Anticoi Sudzuki, Hernán Francisco
  • Hoffmann Sampaio, Carlos
  • Ochoa Freire, Gladys Alfonsina
  • Cortina Pallás, José Luis
Mineral Liberation Analysis (MLA) was applied to characterize a massive iron sulfide ore (FeS2) with the aim of assessing the recovery potential of critical metals, including copper, cobalt, zinc and manganese, in fine particles (<100 µm). The study focuses on particle attributes relevant to froth flotation, emphasizing the role of size, shape and mineral liberation. The results indicate a predominantly moderate recovery potential, with most recoveries ranging from 40 wt% to 70 wt%, associated with increased free surface area of mineral particles. Quantitative shape analysis reveals that particles with lower circularity and slightly elongated morphologies exhibit more favorable flotation behavior. These findings highlight the importance of detailed particle-scale characterization for understanding and optimizing the processing response of fine-grained, low-grade sulfide ores, contributing to improved flotation performance through a structure–property–process approach., The authors would like to thank the financial support provided by the METALLICO HE project (GA: 101091682) and by the Spanish Research Agency (AEI) through the UPCYCLING project PID2023-147160OB-C21. Moreover, this work is part of Maria de Maeztu Units of Excellence Programme CEX2023-001300-M / funded by MICIU/AEI /10.13039/501100011033, and the Catalan Government through the Riis research group (2021SGR-GRC-01041) and the R2EM group (2021- SGR-GRC-00596). Support for the research of J.L. Cortina was also received through the “ICREA Academia” recognition for excellence in research funded by the Generalitat de Catalunya. The authors also acknowledge Tharsis Mining for providing the samples for performing the experimental work., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Technological characterization of cobalt and nickel ores from Greece for metal recovery

  • Eljoudiani, Amina
  • Hoffmann Sampaio, Carlos
  • Oliva Moncunill, Josep
  • Veras, Moacir Medeiros
  • Alfonso Abella, María Pura
  • Anticoi Sudzuki, Hernán Francisco
  • Tampouris, Stylianos
  • Cortina Pallás, José Luis
  • Escalante Salcedo, Percy Rodrigo
Greece has mineral resources in which strategic elements such as nickel (Ni) and cobalt (Co) are present. In this study, characterizations of the metal concentrations of three laterite deposits, as well as minerals from a kiln originating from a mineral processing plant, were carried out. The aim of this research was to integrate technological characterization data on the quantities of cobalt (Co) and nickel (Ni) present in the lateritic profiles of three mineral deposits from Greece and in kiln dust. The study was conducted at the Mineral Processing Laboratory of UPC/Bases Manresa. Aliquots were constituted for particle-size distribution tests by wet sieving followed by laser granulometry. Scanning electron microscopy (SEM) was used to determine the mineralogical compositions. Sink–float tests were conducted to estimate the particle liberation. Mineral liberation analysis (MLA) was performed to understand the liberation and the association of minerals in the samples., This research was funded by the following project: 101091682-Metallico-HORIZON-CL4-2022-RESILIENCE-01., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Evaluation of pyrite recovery via bench-scale froth flotation from a sulfide ore deposit in southwestern Spain

  • Eljoudiani, Amina
  • Medeiros Veras, Moacir
  • Hoffmann Sampaio, Carlos
  • Oliva Moncunill, Josep
  • Cortina Pallás, José Luis
In recent decades, there has been an upsurge in focus on the extraction of pyrite from sulfide ore deposits due to its vital role in the process of metal extraction and environmental management. This study explores the flotation behavior of pyrite in sulfide ores using mechanical-cell flotation. This study compared the performance of two commonly used flotation collectors, potassium butyl xanthate (KXT) and diethyl dithiophosphate (DTP), in the beneficiation of a sulfide ore from southwestern Spain. Statistical analysis performed using MiniTab 4.0 revealed that collector type, reagent dosage, and pulp pH were the principal factors affecting pyrite recovery. Under the tested conditions, KXT exhibited superior metallurgical performance and selectivity compared with DTP. The flotation kinetics demonstrate that the chemical was more efficacious throughout both the rougher and cleaner phases of the process. The findings robustly corroborate the notion that employing xanthate-based chemicals to enhance pyrite concentration facilitates metal extraction from the Sulfide Ore Deposit in southwestern Spain. The study sets out a basis for process growth, and it is proposed that further research be conducted under industrial water conditions to validate the findings., This work was supported by the METALLICO (GAN 101091682) EU project and by the Upcycling project (PID2023-147160OB-C21), financed by the Spanish Research Agency (AEI). Moreover, this work was carried out within the framework of the Multiscale Center of Excellence, funded by the María de Maeztu Program for Units of Excellence (CEX2023-001300-M), supported by MCIN/AEI/Ministerio de Universidades, Spain and the Catalan Government through the R2EM group (2021-SGR-GRC-00596). Support for the research of J.L. Cortina was also received through the “ICREA Academia” recognition for excellence in research funded by the Generalitat de Catalunya. Finally, M. Sevilla and A. B. Hernández from Tharsis Mining S.L. (Huelva, Spain) are strongly acknowledged for mineral samples selection, collection and supply as well by their helpful discussions., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

The concentration of nickel and cobalt from Agios Ioannis laterites by multi gravity separator

  • Eljoudiani, Amina
  • Medeiros Veras, Moacir
  • Hoffmann Sampaio, Carlos
  • Oliva Moncunill, Josep
  • Tampouris, Stylianos
  • Cortina Pallás, José Luis
Asbolane represents a strategic secondary source of cobalt (Co) and manganese (Mn), both of which are essential for the production of high-performance alloys and batteries. In order to conserve high-grade resources, it is crucial to improve the utilization of low-grade ores, which typically contain 1.2% Co and ~14.7% Mn. However, the fine grinding required for these ores poses significant challenges for conventional gravity separation. This study hypothesizes that the Multi Gravity Separator (MGS) can effectively process finely disseminated asbolane ore associated with various gangue minerals. The research was conducted by testing two size fractions (-100 +50 µm and -50 µm from Agios Ioannis laterite in Greece) at the UPC/Bases Manresa Mineral Processing Laboratory, with the primary focus being the optimization of drum speed, Tilt L angle, and wash water flow. The aim of the study was to determine the impact of these three critical variables on the grade, recovery, and separation efficiency of the ore. The analysis was further enhanced by the implementation of response surface methodology (MGS) utilizing Python design. The findings suggest that it is feasible to enhance low-grade asbolane ore from a feed containing 2.6% Co and 32.5%, achieving an acceptable recovery of 82.1%. The optimization of process variables was conducted for each response, with the optimization of each response being conducted independently of the other responses. Further optimization of the variables was carried out with a multi-objective target, demonstrating its potential for efficient recovery from complex, low-grade ores while reducing overgrinding energy loss., The authors thank the company GMMSA Larco for the samples provided. This work was supported by the METALLICO project and by the development of upcycling approaches in the agri-food and process industries to promote on-site and sustainable chemicals production (Upcycling) project (PID2023-147160OB-C21), financed by the Spanish Research Agency (Agencia Estatal de Investigación, AEI)., This research was funded by the following project: 101091682-Metallico-HORIZON-CL4-2022-RESILIENCE-01., Peer Reviewed, Postprint (published version)