Pasar al contenido principal

DESARROLLO DE PROPUESTAS DE UPCYCLING EN LAS INDUSTRIAS DE PROCESOS PARA FOMENTAR LA PRODUCCION ON-SITE Y SOSTENIBLE DE PRODUCTOS QUIMICOS

PID2023-147160OB-C21

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2023
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 23
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Beyond remediation: Evaluating the economic potential of recovering REEs and high-value metals from acidic mine drainage

  • Roa Torres, Alexandra|||0000-0003-3325-2709
  • Vinardell Cruañas, Sergi|||0000-0002-1976-9528
  • López Rodríguez, Julio|||0000-0001-6739-7960
  • Cortina Pallás, José Luis|||0000-0002-3719-5118
The rising demand for critical raw materials (CRMs) and limited European supply drive the search for alternative sources. Acidic mine waters (AMWs) are promising for metal recovery and water reclamation. Although treatment technologies exist, large-scale use is hindered by economic uncertainties. This study evaluates the technoeconomic feasibility of recovering CRMs from AMWs via an integrated process with selective precipitation, ion exchange, nanofiltration, and electrodialysis with bipolar membranes (EDBM). Five scenarios explore different recovery, regeneration, and purification setups. Under these conditions, approximately 1242 t/year of ZnS(s), 5147 t/year of Mg(OH)2(s), 6.65 t/year of heavy rare earth element (HREE) oxides, and 14.23 t/year of light rare earth element (LREE) oxides can be recovered. The results indicate that none of the recovery schemes can be economically viable, with annual net costs ranging from 6.6 million €/year to 12.7 million €/year. Metal precipitation (as hydroxide and sulfide) is the costliest stage, followed by reagent regeneration, where chemical use accounts for 23–90% of costs. Including EDBM increases electricity costs by up to 23%. Although the results highlight that AMW valorization as a circular approach can be useful for obtaining valuable raw materials, reducing supply risks, and reducing EU dependency, the economic results show the need for public subsidies or targeted policy incentives to bridge the viability gap., This project has been financed by the Spanish Agency of Research (AEI) through the projects Acidic Mining Waters as Resource for Sustainable Supply of Raw and CRMs (REEsources, PDC2021-120869-I00), Development of upcycling approaches in the agri-food and process industries to promote on-site and sustainable chemicals production (UPCYCLING, PID2023-147160OB-C21), and Integration of waste processing technologies to ensure a safe, circular and sustainable battery value chain by promoting urban and industrial mining (MET4LIBS, TED2021-131583B-I00), and by EIT Raw Materials through the project Metal influenced acid water as a source of valuable and critical raw materials (REEcovery, PN-21033). The work of A. Roa was supported by the Ministerio de Ciencia e Innovación (MCIN) and the AEI within the scope of the grant PRE-2021-097794. Support for the research of J. L. Cortina was also received through the “ICREA Academia” recognition for excellence in research funded by the Generalitat de Catalunya. Additionally, the authors acknowledge the project CEX2023-001300-M funded by MCIN/AEI /10.13039/501100011033. The Catalan Government (ref. 2021-SGR-596) is also acknowledged. Sergi Vinardell is a Serra-Húnter Lecturer fellow. We acknowledge the Editor, Professor Danielle Julie Carrier, and the anonymous reviewers for their constructive comments that have increased the quality of the paper. Finally, thanks are due to Minera Los Frailes for providing AMW samples.
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Integrated circular process for selective antimony and bismuth recovery and in-situ acid/base regeneration by using electrodialysis bipolar membranes from copper electrorefining effluents

  • Luo, Da-shuang|||0000-0002-8674-7548
  • López Rodríguez, Julio|||0000-0001-6739-7960
  • Cortina Pallás, José Luis|||0000-0002-3719-5118
Secondary waste streams are increasingly being investigated as alternative sources for the recovery of critical raw materials. A representative example is the hydrochloric acid eluate generated during copper electrorefining polishing operations, which is enriched in antimony and bismuth. Both elements can be recovered from the eluate (170–190 g/L HCl, 7–14 g/L Sb, 9–14 g/L Bi and 1–7 g/L As) via an integrated process that sequentially precipitates Sb and Bi as oxychlorides, followed by their conversion into high-purity oxides (Sb2O3(s) and Bi2O3(s)), yielding commercial-grade products with purities exceeding 97%. After metal recovery, the remaining effluent exhibits high salinity, resulting from the high chloride concentration and the alkali used (commonly NaHCO3, Na2CO3, or NaOH), and requires appropriate treatment. To enhance process circularity and minimize consumption of external reagents, electrodialysis with bipolar membranes (EDBM) was implemented to valorise this residual NaCl-rich stream by generating NaOH and HCl in-situ. These chemicals can be internally recycled into upstream process steps, including precipitation control and copper electrorefining polishing via ion-exchange resins, thereby effectively closing the chemical loop. At the laboratory scale, a synthetic high-salinity solution (5 M NaCl and 0.2 M Na2SO4), representative of the effluents generated after Sb and Bi recovery, was used to optimise EDBM operating conditions, including current density and the volume ratio of acid/base and salt compartments. Optimal performance was achieved at 500 A/m2 and an acid/base-to-salt compartment volume ratio of 0.5:2, yielding maximum concentrations of 1.84 M HCl and 2.26 M NaOH, with a specific energy consumption of 8.74 kWh/kg NaOH. Overall, this work demonstrates the technical feasibility and sustainability benefits of integrating critical metal recovery with in-situ reagent regeneration, offering a circular and resource-efficient solution for the non-ferrous metallurgical industry., This research has been supported by the RECOPPs project (PI-19119) funded by EIT RawMaterials under H2020, The Upcycling project (PID2023-147160OB-C21) is funded by the Spanish Research Agency (AEI), Spain. D. Luo acknowledges the China Scholarship Council for her PhD grant (CSC 202008420263). This research is part of the María de Maeztu Unit of Excellence Programme (CEX2023-001300-M) is funded by MICIU/AEI, Spain. Jose Luis Cortina received support for the research through the “ICREA Academia” recognition for excellence in research funded by the Generalitat de Catalunya. Finally, G. Rios and A. Mejía from Atlantic Copper (Huelva, Spain) are acknowledged for providing ion-exchange eluate samples and operating data for the copper electrorefining polishing stage. The authors acknowledge Vanesa Ligos Viadé for her help during the experimental work.
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

The concentration of nickel and cobalt from Agios Ioannis laterites by multi gravity separator

  • Eljoudiani, Amina
  • Medeiros Veras, Moacir
  • Hoffmann Sampaio, Carlos|||0000-0001-5840-1614
  • Oliva Moncunill, Josep|||0000-0001-6214-5713
  • Tampouris, Stylianos
  • Cortina Pallás, José Luis|||0000-0002-3719-5118
Asbolane represents a strategic secondary source of cobalt (Co) and manganese (Mn), both of which are essential for the production of high-performance alloys and batteries. In order to conserve high-grade resources, it is crucial to improve the utilization of low-grade ores, which typically contain 1.2% Co and ~14.7% Mn. However, the fine grinding required for these ores poses significant challenges for conventional gravity separation. This study hypothesizes that the Multi Gravity Separator (MGS) can effectively process finely disseminated asbolane ore associated with various gangue minerals. The research was conducted by testing two size fractions (-100 +50 µm and -50 µm from Agios Ioannis laterite in Greece) at the UPC/Bases Manresa Mineral Processing Laboratory, with the primary focus being the optimization of drum speed, Tilt L angle, and wash water flow. The aim of the study was to determine the impact of these three critical variables on the grade, recovery, and separation efficiency of the ore. The analysis was further enhanced by the implementation of response surface methodology (MGS) utilizing Python design. The findings suggest that it is feasible to enhance low-grade asbolane ore from a feed containing 2.6% Co and 32.5%, achieving an acceptable recovery of 82.1%. The optimization of process variables was conducted for each response, with the optimization of each response being conducted independently of the other responses. Further optimization of the variables was carried out with a multi-objective target, demonstrating its potential for efficient recovery from complex, low-grade ores while reducing overgrinding energy loss., The authors thank the company GMMSA Larco for the samples provided. This work was supported by the METALLICO project and by the development of upcycling approaches in the agri-food and process industries to promote on-site and sustainable chemicals production (Upcycling) project (PID2023-147160OB-C21), financed by the Spanish Research Agency (Agencia Estatal de Investigación, AEI)., This research was funded by the following project: 101091682-Metallico-HORIZON-CL4-2022-RESILIENCE-01., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Solar-Driven Photothermal Membrane Distillation: A holistic review of transport phenomena, fouling dynamics, and advanced simulation paradigms

  • Bazargan Harandi, Hesam|||0000-0001-8442-3024
  • Asadi, Anahita
  • Cortina Pallás, José Luis|||0000-0002-3719-5118
Solar-Driven Photothermal Membrane Distillation (SPMD) integrates solar energy using photothermal coatings on the hydrophobic membranes, such as carbon black nanoparticles coated on PVDF membranes, to achieve localized heating at the liquid–vapor interface. This approach enhances energy efficiency by mitigating temperature polarization and reducing thermal energy demands compared to conventional membrane distillation (MD). However, the challenges of fouling and scaling, which can significantly impair membrane performance, continue to be a serious concern, similar to other MD configurations. This comprehensive review establishes a unified framework connecting core transmembrane mass and heat transfer mechanisms with the thermodynamic pathways of surface fouling and scaling. We critically evaluate various strategies for mitigating scaling and fouling, including the development of omniphobic membranes, the introduction of nano/micro bubbles, the addition of anti-scalants and surfactants, and the implementation of chemical and mechanical pretreatments. Subsequently, the impact of photothermal coatings, applied to the feed–membrane interface in SPMD to absorb solar radiation, on scaling and fouling resistance is also discussed. Finally, we provide a comprehensive review of advanced computational paradigms, for both coupled radiative-thermal and dynamic fouling models—contrasting deterministic, physics-based multi-phase Computational Fluid Dynamics (CFD) with empirical Response Surface Methodology (RSM) and predictive Artificial Intelligence (AI) data-driven models. Beyond this survey, we identify and directly address a critical, previously unquantified gap in the field of SPMD: the absence of an explicit thermodynamic link between transmembrane heat/mass transfer and the nucleation and adhesion processes that govern scaling and fouling, and we further highlight the practical barriers—photothermal coating durability, economic feasibility, and technology readiness—that currently separate laboratory-scale SPMD from field deployment. This holistic synthesis charts future engineering strategies for scalable, fouling-resistant, and optimized solar-driven desalination infrastructure., This work is part of María de Maeztu Unit of Excellence Programme CEX2023-001300-M/funded by MICIU/AEI/10.13039/501100011033 (Upcycling) project (PID2023-147160OB-C21) financed by the Spanish Research Agency (AEI). Finally, J.L. Cortina also received through the “ICREA Academia” recognition for excellence in research funded by the Generalitat de Catalunya.
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Optimized ion selectivity in semiaromatic based nanofiltration membranes via PDADMAC and PSS layer-by-layer self-assembly

  • Moghadamfar, Tanaz
  • López Rodríguez, Julio|||0000-0001-6739-7960
  • Cortina Pallás, José Luis|||0000-0002-3719-5118
  • Valle Mendoza, Luis Javier del|||0000-0001-9916-1741
  • Reig i Amat, Mònica|||0000-0003-0225-2466
The increasing demand for water treatment in arid and semiarid areas has led to the exploration of the potential integration of polymeric nanofiltration membranes for selective separation of monovalent and multivalent ions from surface waters with high salinity. This study investigates the modification of semiaromatic-based polyamide nanofiltration membrane (Fortilife-XN™) using polyelectrolyte multilayers through the layer-by-layer (LbL) technique to enhance ion selectivity and cation rejection. Poly(diallyl dimethylammonium chloride) (PDADMAC) and poly(sodium-4-styrene sulfonate) (PSS) were used to coat the membranes, with varying bilayer numbers to assess their impact on membrane performance. Membranes were characterized and tested with synthetic solutions mimicking Llobregat river water (Spain) to determine membrane performance in terms of water flux and rejections. Besides, data was fitted to the Solution-Electro-Diffusion-Film model to determine membrane permeances to species. Results showed that the membrane coated with 5.5 bilayers exhibited the highest selectivity for monovalent and divalent cations, with significant improvements in ion rejection. Specifically, Mg(II) rejection increased to 93 %, and selectivity for K/Mg and Na/Mg rose by 42 % and 60 %, respectively. Furthermore, the selectivity for K/Ca and Na/Ca improved by 92 % and 140 %, with Ca(II) rejection reaching 91 %. The modified membranes exhibited water permeability comparable to the unmodified membrane, with the (PDADMAC/PSS)4.5 membrane showing the highest permeability, owing to its optimal balance of roughness (77 nm) and contact angle (20°). These findings highlight the effectiveness of polyelectrolyte multilayers in enhancing the selectivity capabilities of nanofiltration membranes for salinity reduction in surface water treatment for drinking water production as substitution of reverse osmosis., This research was supported by the Development of upcycling approaches in the agri-food and process industries to promote on-site and sustainable chemicals production (Upcycling) project (PID2023-147160OB-C21), Integration of waste processing technologies to ensure a safe, circular and sustainable battery value chain by promoting urban and industrial mining (MET4LIBS), (TED2021-131583B-I00) and (PID2022-140302OB-I00) financed by the Spanish Research Agency (AEI). This work is funded by the AGAUR-FI predoctoral program (2023 FI-100056) Joan Oró, supported by the Secretariat of Universities and Research under the Department of Research and Universities of the Generalitat de Catalunya. Additionally, the authors acknowledge the support of the Catalan Government through the R2EM group (2021-SGR-GRC-00596) and PSEP group (2021-SGR-01042). Moreover, this work was carried out within the framework of the Multiscale Center of Excellence, funded by the María de Maeztu Program for Units of Excellence (CEX2023-001300-M), supported by MCIN/AEI / Ministerio de Universidades, Spain. Finally, J.L. Cortina was also received through the “ICREA Academia” recognition for excellence in research funded by the Generalitat de Catalunya., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Characterization of Tharsis mine tailings for ore reprocessing for potential critical materials recovery

  • Ochoa Freire, Gladys Alfonsina|||0009-0002-6191-0238
  • Alfonso Abella, María Pura|||0000-0002-1515-4999
  • Escalante Salcedo, Percy Rodrigo|||0009-0000-2890-1335
  • Medeiros Veras, Moacir
  • Hoffmann Sampaio, Carlos|||0000-0001-5840-1614
  • Oliva Moncunill, Josep|||0000-0001-6214-5713
  • Cortina Pallás, José Luis|||0000-0002-3719-5118
  • Hernández, Ana Belén
  • Sevilla, Manuel
This study characterizes and evaluates the potential recovery of metals from tailings of the Tharsis mine (Huelva, Spain), with a focus on critical raw materials (CRMs) essential for the energy transition. These tailings, generated during past sulfuric acid production from pyrite concentrates, are highly homogeneous, with over 40 % of particles finer than 60 µm. Chemical analyses revealed a uniform distribution of elements such as Cu (0,35 %), Zn (1,06 %), Pb (0,10 %), Co (244 ppm), and Ag (49 ppm), while Sb showed enrichment in finer fractions. Mineralogical results identified pyrite and quartz as the dominant phases across all size ranges. Quantitative mineralogy using the Advanced Mineral Identification and Characterization System (AMICS) and Mineral Liberation Analysis (MLA) confirmed that more than 90 % pyrite is liberated under 60 µm, which suggests strong potential for recovery through gravity concentration using multi-method approaches, including multi-gravity separation (MGS), air jet concentrators, and centrifugal jigs. In addition to exploring fiscal-chemical concentration techniques, such as froth flotation, where grinding to +75–200 µm was identified as the optimal size range for pyrite and quartz liberation, improving flotation performance. The results demonstrate that CRMs can be more sustainably recovered from secondary resources such as mine tailings. In contrast to previous studies, which have mainly focused on leaching, this work emphasizes the efficiency of pre-concentration methods for CRM recovery, thereby reducing the environmental risks associated with hazardous elements. Potential applications of recovered products include batteries, cement, paints, and ceramics, thereby supporting industrial supply chains while contributing to circular economy strategies., This research was supported by This research and was funded by the following project: 101091682-Metallico-HORIZON-CL4-2022-RESILIENCE-01 and by the Spanish Research Agency (AEI) through the project “Development of upcycling approaches in the agri‐food and process industries to promote on-site and sustainable chemicals production (UPCYCLING)” project PID2023-147160OB-C21. Moreover, this work was carried out within the framework of the Multiscale Center of Excellence, funded by the Marí a de Maeztu Program for Units of Excellence (CEX2023-001300-M), supported by MCIN/AEI/Ministerio de Universidades, Spain and the Catalan Government through the Riis research group (2021-SGR-GRC-01041) and the R2EM group (2021-SGR-GRC-00596). Support for the research of J.L. Cortina was also received through the “ICREA Academia” recognition for excellence in research funded by the Generalitat de Catalunya. The authors also acknowledge Minera Los Frailes for providing the AMW samples for performing the experimental work., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Towards sustainable recovery of rare earth elements from acidic mine waters: a circular treatment approach integrating selective precipitation and ion exchange

  • Roa Torres, Alexandra|||0000-0003-3325-2709
  • López Rodríguez, Julio|||0000-0001-6739-7960
  • Cortina Pallás, José Luis|||0000-0002-3719-5118
Acidic Mine Waters (AMWs) pose a great environmental risk due to their acidity and metal content. Traditional treatments neutralize acidity but produce hazardous sludge. T his study introduces a sustainable, circular approach for treating AMWs, focusing on recovering valuable Rare Earth Elements (REEs) and other Critical Raw Materials (CRMs). Using AMWs from the Aznalcóllar Open Pit (SW, Spain), metals like Fe, Al, and Zn were removed through precipitation and sulfide formation, achieving >99% efficiency. Ion exchange resins separated heavy and light REEs, which were recovered as >90% pure oxalates. This eco-friendly process minimizes sludge, mitigates pollution, and supports CRM demand, demonstrating global applicability., This project has been financed by the Spanish Agency of Research (AEI) through the REEsources (PDC2021120869-I00), UPCYCLING (PID2023-147160OB-C21) and MET4LIBS (TED2021-131583B-I00) projects., as well as by the REEcovery project (PN-21033) financed by the EIT-Raw Materials. The work of A. Roa was supported by the Ministerio de Ciencia e Innovación (MCIN) and the AEI within the scope of the grant PRE2021-097794. Support for the research of J.L. Cortina was also received through the “ICREA Academia” recognition for excellence in research funded by the Generalitat de Catalunya. Additionally, the authors acknowledge the project CEX2023-001300-M funded by MCIN/AEI/10.13039/501100011033. Finally, the Catalan Government (ref. 2021-SGR-596) is also acknowledged. The authors also acknowledge Minera Los Frailes for providing the AMWs., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Role of polyelectrolyte concentration in layer-by-layer-modified sulfonated polyether sulfone nanofiltration membranes: implications for ion selectivity and pH resistance

  • Moghadamfar, Tanaz
  • Cortina Pallás, José Luis|||0000-0002-3719-5118
  • Valle Mendoza, Luis Javier del|||0000-0001-9916-1741
  • Reig i Amat, Mònica|||0000-0003-0225-2466
Layer-by-layer (LbL) modification of nanofiltration membranes using polyelectrolytes is widely studied, though the influence of PE concentration on flat-sheet polymeric membranes has been insufficiently explored. In this study, acidic-resistant sulfonated polyether sulfone (HYDRACoRe 70pHT) membranes were modified using poly(diallyldimethylammonium chloride) (PDADMAC) and poly(styrenesulfonate) (PSS) polyelectrolytes at concentrations of 0.01, 0.1, and 1.0 wt·%, applying 5.5 bilayers ending with PDADMAC. Membrane performance was evaluated by a nanofiltration setup based on hydraulic permeability, ion rejection, and selectivity. The membrane modified with a PE concentration of 0.01 wt·% demonstrated the best performance. At a transmembrane pressure of 12 bar, Mg(II) rejection increased from 73 ± 2% to 88 ± 1% (a 21% increase with respect to the virgin membrane) and Ca(II) rejection from 74 ± 2% to 87 ± 1% (a 18% increase). Selectivity improvements were also notable, with Mg(II) selectivity over Na(I) and K(I) increasing by 94% and 173%, respectively, and Ca(II) selectivity over Na(I) and K(I) increasing by 74% and 133%, respectively. Beyond membrane modification, the stability of the resulting membranes was thoroughly investigated. All membranes were soaked in 0.1 M HNO3 and NaOH solutions for 2 months after testing. Characterization via FTIR, contact angle, FE-SEM, XPS, and zeta potential confirmed successful multilayer formation and evaluated changes after exposure to an extreme pH environment. The optimized 0.01 wt·% membrane exhibited the highest stability under extreme pH conditions, despite partial degradation affecting all modified membranes., This research was supported by the Development of upcycling approaches in the agri-food and process industries to promote on-site and sustainable chemicals production (Upcycling) project (PID2023-147160OB-C21) was financed by the Spanish Research Agency (AEI). This work is funded by the AGAUR-FI predoctoral program (2023 FI-100056) Joan Oró, supported by the Secretariat of Universities and Research under the Department of Research and Universities of the Generalitat de Catalunya. Additionally, the authors acknowledge the support of the Catalan Government through the R2EM group (2021-SGR-GRC-00596) and PSEP group (2021-SGR-01042). Moreover, this work was carried out within the framework of the Multiscale Center of Excellence, funded by the María de Maeztu Program for Units of Excellence (CEX2023-001300-M), supported by MCIN/AEI/Ministerio de Universidades, Spain. Finally, J.L. Cortina received support through the “ICREA Academia” recognition for excellence in research funded by the Generalitat de Catalunya., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Integrating water reclamation and electrolysis processes for green hydrogen production: an economic evaluation

  • Vinardell Cruañas, Sergi|||0000-0002-1976-9528
  • Cortina Pallás, José Luis|||0000-0002-3719-5118
  • Valderrama Ángel, César Alberto|||0000-0001-6711-8183
In this work, the production of green hydrogen using an electrolyser fed with the water produced in a water reclamation process was economically evaluated. The water reclamation process was considered to be implemented in a municipal wastewater treatment plant (WWTP) and consisted of an ultrafiltration and multiple-pass reverse osmosis system. The results illustrated that specific water consumption and water production costs featured a minimal impact on the levelized cost of hydrogen (LCOH). Specifically, the LCOH was around 3 €/kgH2 regardless of the water reclamation scenario evaluated. These results point out that the levelized cost of producing hydrogen using water electrolysis would not experience noticeable variations after implementing an advanced water reclamation scheme in a WWTP. Overall, this study highlights the potential of integrating water reclamation and electrolysis processes to improve the sustainability and resource recovery of future WWTPs., The authors acknowledge the Spanish Agency of Research (AEI) through the project development of upcycling approaches in the agri-food and process industries to promote on-site and sustainable chemicals production (UPCYCLING) (PID2023-147160OB-C21) and Catalan Government for the project 2021-SGR-GRC-00596.
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Powering renewable hydrogen production with alternative water sources: Is it economically feasible?

  • Vinardell Cruañas, Sergi|||0000-0002-1976-9528
  • Cortina Pallás, José Luis|||0000-0002-3719-5118
  • Valderrama Ángel, César Alberto|||0000-0001-6711-8183
Limited access to freshwater is a barrier to implement water electrolysis processes regardless of the availability of renewable energy sources. The present work aims to evaluate the economic potential of green hydrogen production using high-quality water produced from alternative water sources. Specifically, the study focuses on two scenarios where desalted water for the electrolyser is produced from either treated urban wastewater or seawater using membrane technologies. The results illustrated that the water reclamation scheme featured substantially lower costs (0.81–1.02 €/m3) than the seawater desalination plant (1.09–1.58 €/m3). However, implementing a water production process before the electrolyser only represented a minor impact (< 2.4 %) on the levelized cost of hydrogen (LCOH) and specific energy consumption of the integrated system, even with water production costs as high as 10 €/m3. The contribution of the specific water consumption to the LCOH ranged between 0.10 and 1.80 % when considering water consumptions between 9 and 15 L/kgH2, respectively. The sensitivity analysis illustrated that the impact of water production on the LCOH was nearly negligible when compared with other operating factors, such as the electrolyser efficiency or the load factor. Overall, this study highlights that water production from alternative water sources has a minimal impact on the economic balance of the electrolyser, making it a viable option to support green hydrogen projects in water-scarce regions., We would like to acknowledge the Spanish Agency of Research (AEI) through the project development of upcycling approaches in the agri-food and process industries to promote on-site and sustainable chemicals production (UPCYCLING) (PID2023-147160OB-C21) funded by MICIU/AEI/10.13039/501100011033 and by FEDER, EU. The authors also acknowledge the Catalan Government for the project 2021-SGR-GRC-00596. Sergi Vinardell is a Serra Húnter fellow. Jose Luis Cortina received support for the research through the “ICREA Academia” recognition for excellence in research funded by the Generalitat de Catalunya. Additionally, the authors acknowledge the project CEX2023-001300-M funded by MCIN/AEI/10.13039/501100011033., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

MLA-based characterization of fine iron sulfide particles and implications for critical metal recoveries

  • Escalante Salcedo, Percy Rodrigo|||0009-0000-2890-1335
  • Oliva Moncunill, Josep|||0000-0001-6214-5713
  • Anticoi Sudzuki, Hernán Francisco|||0000-0003-4316-5203
  • Hoffmann Sampaio, Carlos|||0000-0001-5840-1614
  • Ochoa Freire, Gladys Alfonsina|||0009-0002-6191-0238
  • Cortina Pallás, José Luis|||0000-0002-3719-5118
Mineral Liberation Analysis (MLA) was applied to characterize a massive iron sulfide ore (FeS2) with the aim of assessing the recovery potential of critical metals, including copper, cobalt, zinc and manganese, in fine particles (<100 µm). The study focuses on particle attributes relevant to froth flotation, emphasizing the role of size, shape and mineral liberation. The results indicate a predominantly moderate recovery potential, with most recoveries ranging from 40 wt% to 70 wt%, associated with increased free surface area of mineral particles. Quantitative shape analysis reveals that particles with lower circularity and slightly elongated morphologies exhibit more favorable flotation behavior. These findings highlight the importance of detailed particle-scale characterization for understanding and optimizing the processing response of fine-grained, low-grade sulfide ores, contributing to improved flotation performance through a structure–property–process approach., The authors would like to thank the financial support provided by the METALLICO HE project (GA: 101091682) and by the Spanish Research Agency (AEI) through the UPCYCLING project PID2023-147160OB-C21. Moreover, this work is part of Maria de Maeztu Units of Excellence Programme CEX2023-001300-M / funded by MICIU/AEI /10.13039/501100011033, and the Catalan Government through the Riis research group (2021SGR-GRC-01041) and the R2EM group (2021- SGR-GRC-00596). Support for the research of J.L. Cortina was also received through the “ICREA Academia” recognition for excellence in research funded by the Generalitat de Catalunya. The authors also acknowledge Tharsis Mining for providing the samples for performing the experimental work., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Evaluation of nanofiltration membranes for promoting water reclamation in gypsum saturated acidic mine waters

  • Roa Torres, Alexandra|||0000-0003-3325-2709
  • López Rodríguez, Julio|||0000-0001-6739-7960
  • Cortina Pallás, José Luis|||0000-0002-3719-5118
Acidic Mine Waters (AMWs) are still considered the largest environmental challenge to be solved in the global mining industry. Even though there are treatment options for them, nowadays, the efforts are moving towards the implementation of membrane-based management schemes to treat AMW. More precisely, they are providing the possibilities to concentrate and recover valuable metals (e.g. Cu, Zn, Ni, Co, and rare earths), recover sulphate-rich streams and promote water reclamation. This study focuses on the evaluation of three commercially available nanofiltration membranes (NF270, NFX, and PRO-XS2) with synthetic solutions, mimicking different levels of pre-treatment of AMWs: i). containing Na+ and SO42-; ii) containing Ca2+, Na+, and SO42-; and iii) containing Mg2+, Mn2+, Ca2+, Na+, and SO42–. Later, the best-performing membrane was selected to evaluate its performance using a real pre-treated AMW. The results showed that higher fluxes, as well as higher rejections of sulphates/divalent metallic species (>90 %), were attained when the solution was pre-treated for both synthetic and real AMWs. In relation to the membrane performance as a function of permeate recovery, membrane scaling was observed at permeate recoveries higher than 50 %, mostly related to CaSO4:2H2O(s)., This project has been financed by the Spanish Agency of Research (AEI) through the projects Acidic Mining Waters as Resource for Sustainable Supply of Raw and CRMs (REEsources, PDC2021-120869-I00), Development of upcycling approaches in the agri-food and process industries to promote on-site and sustainable chemicals production (UPCYCLING, PID2023-147160OB-C21), and Integration of waste processing technologies to ensure a safe, circular and sustainable battery value chain by promoting urban and industrial mining project (MET4LIBS, TED2021-131583B-I00), and by EIT-Raw Material through the project Metal Influenced Acid Water as a source of valuable and critical raw materials (REEcovery, PN-21033). The work of A. Roa was supported by the Ministerio de Ciencia e Innovación (MCIN) and the AEI within the scope of the grant PRE-2021-097794. Support for the research of J.L. Cortina was also received through the “ICREA Academia” recognition for excellence in research funded by the Generalitat de Catalunya. Additionally, the authors acknowledge the project CEX2023-001300-M funded by MCIN/AEI / 10.13039/501100011033. Finally, the Catalan Government (ref. 2021-SGR-596) is also acknowledged. The authors also acknowledge Minera Los Frailes for providing the AMWs, and to A. Rapti and R. Giovannini for their help during the experimental work., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Solar-Driven Photothermal Membrane Distillation: A holistic review of transport phenomena, fouling dynamics, and advanced simulation paradigms

  • Bazargan Harandi, Hesam
  • Asadi, Anahita
  • Cortina Pallás, José Luis
Solar-Driven Photothermal Membrane Distillation (SPMD) integrates solar energy using photothermal coatings on the hydrophobic membranes, such as carbon black nanoparticles coated on PVDF membranes, to achieve localized heating at the liquid–vapor interface. This approach enhances energy efficiency by mitigating temperature polarization and reducing thermal energy demands compared to conventional membrane distillation (MD). However, the challenges of fouling and scaling, which can significantly impair membrane performance, continue to be a serious concern, similar to other MD configurations. This comprehensive review establishes a unified framework connecting core transmembrane mass and heat transfer mechanisms with the thermodynamic pathways of surface fouling and scaling. We critically evaluate various strategies for mitigating scaling and fouling, including the development of omniphobic membranes, the introduction of nano/micro bubbles, the addition of anti-scalants and surfactants, and the implementation of chemical and mechanical pretreatments. Subsequently, the impact of photothermal coatings, applied to the feed–membrane interface in SPMD to absorb solar radiation, on scaling and fouling resistance is also discussed. Finally, we provide a comprehensive review of advanced computational paradigms, for both coupled radiative-thermal and dynamic fouling models—contrasting deterministic, physics-based multi-phase Computational Fluid Dynamics (CFD) with empirical Response Surface Methodology (RSM) and predictive Artificial Intelligence (AI) data-driven models. Beyond this survey, we identify and directly address a critical, previously unquantified gap in the field of SPMD: the absence of an explicit thermodynamic link between transmembrane heat/mass transfer and the nucleation and adhesion processes that govern scaling and fouling, and we further highlight the practical barriers—photothermal coating durability, economic feasibility, and technology readiness—that currently separate laboratory-scale SPMD from field deployment. This holistic synthesis charts future engineering strategies for scalable, fouling-resistant, and optimized solar-driven desalination infrastructure., This work is part of María de Maeztu Unit of Excellence Programme CEX2023-001300-M/funded by MICIU/AEI/10.13039/501100011033 (Upcycling) project (PID2023-147160OB-C21) financed by the Spanish Research Agency (AEI). Finally, J.L. Cortina also received through the “ICREA Academia” recognition for excellence in research funded by the Generalitat de Catalunya., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Integrated circular process for selective antimony and bismuth recovery and in-situ acid/base regeneration by using electrodialysis bipolar membranes from copper electrorefining effluents

  • Luo, Da-shuang
  • López Rodríguez, Julio
  • Cortina Pallás, José Luis
Secondary waste streams are increasingly being investigated as alternative sources for the recovery of critical raw materials. A representative example is the hydrochloric acid eluate generated during copper electrorefining polishing operations, which is enriched in antimony and bismuth. Both elements can be recovered from the eluate (170–190 g/L HCl, 7–14 g/L Sb, 9–14 g/L Bi and 1–7 g/L As) via an integrated process that sequentially precipitates Sb and Bi as oxychlorides, followed by their conversion into high-purity oxides (Sb2O3(s) and Bi2O3(s)), yielding commercial-grade products with purities exceeding 97%. After metal recovery, the remaining effluent exhibits high salinity, resulting from the high chloride concentration and the alkali used (commonly NaHCO3, Na2CO3, or NaOH), and requires appropriate treatment. To enhance process circularity and minimize consumption of external reagents, electrodialysis with bipolar membranes (EDBM) was implemented to valorise this residual NaCl-rich stream by generating NaOH and HCl in-situ. These chemicals can be internally recycled into upstream process steps, including precipitation control and copper electrorefining polishing via ion-exchange resins, thereby effectively closing the chemical loop. At the laboratory scale, a synthetic high-salinity solution (5 M NaCl and 0.2 M Na2SO4), representative of the effluents generated after Sb and Bi recovery, was used to optimise EDBM operating conditions, including current density and the volume ratio of acid/base and salt compartments. Optimal performance was achieved at 500 A/m2 and an acid/base-to-salt compartment volume ratio of 0.5:2, yielding maximum concentrations of 1.84 M HCl and 2.26 M NaOH, with a specific energy consumption of 8.74 kWh/kg NaOH. Overall, this work demonstrates the technical feasibility and sustainability benefits of integrating critical metal recovery with in-situ reagent regeneration, offering a circular and resource-efficient solution for the non-ferrous metallurgical industry., This research has been supported by the RECOPPs project (PI-19119) funded by EIT RawMaterials under H2020, The Upcycling project (PID2023-147160OB-C21) is funded by the Spanish Research Agency (AEI), Spain. D. Luo acknowledges the China Scholarship Council for her PhD grant (CSC 202008420263). This research is part of the María de Maeztu Unit of Excellence Programme (CEX2023-001300-M) is funded by MICIU/AEI, Spain. Jose Luis Cortina received support for the research through the “ICREA Academia” recognition for excellence in research funded by the Generalitat de Catalunya. Finally, G. Rios and A. Mejía from Atlantic Copper (Huelva, Spain) are acknowledged for providing ion-exchange eluate samples and operating data for the copper electrorefining polishing stage. The authors acknowledge Vanesa Ligos Viadé for her help during the experimental work., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Optimized ion selectivity in semiaromatic based nanofiltration membranes via PDADMAC and PSS layer-by-layer self-assembly

  • Moghadamfar, Tanaz
  • López Rodríguez, Julio
  • Cortina Pallás, José Luis
  • Valle Mendoza, Luis Javier del
  • Reig i Amat, Mònica
The increasing demand for water treatment in arid and semiarid areas has led to the exploration of the potential integration of polymeric nanofiltration membranes for selective separation of monovalent and multivalent ions from surface waters with high salinity. This study investigates the modification of semiaromatic-based polyamide nanofiltration membrane (Fortilife-XN™) using polyelectrolyte multilayers through the layer-by-layer (LbL) technique to enhance ion selectivity and cation rejection. Poly(diallyl dimethylammonium chloride) (PDADMAC) and poly(sodium-4-styrene sulfonate) (PSS) were used to coat the membranes, with varying bilayer numbers to assess their impact on membrane performance. Membranes were characterized and tested with synthetic solutions mimicking Llobregat river water (Spain) to determine membrane performance in terms of water flux and rejections. Besides, data was fitted to the Solution-Electro-Diffusion-Film model to determine membrane permeances to species. Results showed that the membrane coated with 5.5 bilayers exhibited the highest selectivity for monovalent and divalent cations, with significant improvements in ion rejection. Specifically, Mg(II) rejection increased to 93 %, and selectivity for K/Mg and Na/Mg rose by 42 % and 60 %, respectively. Furthermore, the selectivity for K/Ca and Na/Ca improved by 92 % and 140 %, with Ca(II) rejection reaching 91 %. The modified membranes exhibited water permeability comparable to the unmodified membrane, with the (PDADMAC/PSS)4.5 membrane showing the highest permeability, owing to its optimal balance of roughness (77 nm) and contact angle (20°). These findings highlight the effectiveness of polyelectrolyte multilayers in enhancing the selectivity capabilities of nanofiltration membranes for salinity reduction in surface water treatment for drinking water production as substitution of reverse osmosis., This research was supported by the Development of upcycling approaches in the agri-food and process industries to promote on-site and sustainable chemicals production (Upcycling) project (PID2023-147160OB-C21), Integration of waste processing technologies to ensure a safe, circular and sustainable battery value chain by promoting urban and industrial mining (MET4LIBS), (TED2021-131583B-I00) and (PID2022-140302OB-I00) financed by the Spanish Research Agency (AEI). This work is funded by the AGAUR-FI predoctoral program (2023 FI-100056) Joan Oró, supported by the Secretariat of Universities and Research under the Department of Research and Universities of the Generalitat de Catalunya. Additionally, the authors acknowledge the support of the Catalan Government through the R2EM group (2021-SGR-GRC-00596) and PSEP group (2021-SGR-01042). Moreover, this work was carried out within the framework of the Multiscale Center of Excellence, funded by the María de Maeztu Program for Units of Excellence (CEX2023-001300-M), supported by MCIN/AEI / Ministerio de Universidades, Spain. Finally, J.L. Cortina was also received through the “ICREA Academia” recognition for excellence in research funded by the Generalitat de Catalunya., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Role of polyelectrolyte concentration in layer-by-layer-modified sulfonated polyether sulfone nanofiltration membranes: implications for ion selectivity and pH resistance

  • Moghadamfar, Tanaz
  • Cortina Pallás, José Luis
  • Valle Mendoza, Luis Javier del
  • Reig i Amat, Mònica
Layer-by-layer (LbL) modification of nanofiltration membranes using polyelectrolytes is widely studied, though the influence of PE concentration on flat-sheet polymeric membranes has been insufficiently explored. In this study, acidic-resistant sulfonated polyether sulfone (HYDRACoRe 70pHT) membranes were modified using poly(diallyldimethylammonium chloride) (PDADMAC) and poly(styrenesulfonate) (PSS) polyelectrolytes at concentrations of 0.01, 0.1, and 1.0 wt·%, applying 5.5 bilayers ending with PDADMAC. Membrane performance was evaluated by a nanofiltration setup based on hydraulic permeability, ion rejection, and selectivity. The membrane modified with a PE concentration of 0.01 wt·% demonstrated the best performance. At a transmembrane pressure of 12 bar, Mg(II) rejection increased from 73 ± 2% to 88 ± 1% (a 21% increase with respect to the virgin membrane) and Ca(II) rejection from 74 ± 2% to 87 ± 1% (a 18% increase). Selectivity improvements were also notable, with Mg(II) selectivity over Na(I) and K(I) increasing by 94% and 173%, respectively, and Ca(II) selectivity over Na(I) and K(I) increasing by 74% and 133%, respectively. Beyond membrane modification, the stability of the resulting membranes was thoroughly investigated. All membranes were soaked in 0.1 M HNO3 and NaOH solutions for 2 months after testing. Characterization via FTIR, contact angle, FE-SEM, XPS, and zeta potential confirmed successful multilayer formation and evaluated changes after exposure to an extreme pH environment. The optimized 0.01 wt·% membrane exhibited the highest stability under extreme pH conditions, despite partial degradation affecting all modified membranes., This research was supported by the Development of upcycling approaches in the agri-food and process industries to promote on-site and sustainable chemicals production (Upcycling) project (PID2023-147160OB-C21) was financed by the Spanish Research Agency (AEI). This work is funded by the AGAUR-FI predoctoral program (2023 FI-100056) Joan Oró, supported by the Secretariat of Universities and Research under the Department of Research and Universities of the Generalitat de Catalunya. Additionally, the authors acknowledge the support of the Catalan Government through the R2EM group (2021-SGR-GRC-00596) and PSEP group (2021-SGR-01042). Moreover, this work was carried out within the framework of the Multiscale Center of Excellence, funded by the María de Maeztu Program for Units of Excellence (CEX2023-001300-M), supported by MCIN/AEI/Ministerio de Universidades, Spain. Finally, J.L. Cortina received support through the “ICREA Academia” recognition for excellence in research funded by the Generalitat de Catalunya., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Characterization of Tharsis mine tailings for ore reprocessing for potential critical materials recovery

  • Ochoa Freire, Gladys Alfonsina
  • Alfonso Abella, María Pura
  • Escalante Salcedo, Percy Rodrigo
  • Medeiros Veras, Moacir
  • Hoffmann Sampaio, Carlos
  • Oliva Moncunill, Josep
  • Cortina Pallás, José Luis
  • Hernández, Ana Belén
  • Sevilla, Manuel
This study characterizes and evaluates the potential recovery of metals from tailings of the Tharsis mine (Huelva, Spain), with a focus on critical raw materials (CRMs) essential for the energy transition. These tailings, generated during past sulfuric acid production from pyrite concentrates, are highly homogeneous, with over 40 % of particles finer than 60 µm. Chemical analyses revealed a uniform distribution of elements such as Cu (0,35 %), Zn (1,06 %), Pb (0,10 %), Co (244 ppm), and Ag (49 ppm), while Sb showed enrichment in finer fractions. Mineralogical results identified pyrite and quartz as the dominant phases across all size ranges. Quantitative mineralogy using the Advanced Mineral Identification and Characterization System (AMICS) and Mineral Liberation Analysis (MLA) confirmed that more than 90 % pyrite is liberated under 60 µm, which suggests strong potential for recovery through gravity concentration using multi-method approaches, including multi-gravity separation (MGS), air jet concentrators, and centrifugal jigs. In addition to exploring fiscal-chemical concentration techniques, such as froth flotation, where grinding to +75–200 µm was identified as the optimal size range for pyrite and quartz liberation, improving flotation performance. The results demonstrate that CRMs can be more sustainably recovered from secondary resources such as mine tailings. In contrast to previous studies, which have mainly focused on leaching, this work emphasizes the efficiency of pre-concentration methods for CRM recovery, thereby reducing the environmental risks associated with hazardous elements. Potential applications of recovered products include batteries, cement, paints, and ceramics, thereby supporting industrial supply chains while contributing to circular economy strategies., This research was supported by This research and was funded by the following project: 101091682-Metallico-HORIZON-CL4-2022-RESILIENCE-01 and by the Spanish Research Agency (AEI) through the project “Development of upcycling approaches in the agri‐food and process industries to promote on-site and sustainable chemicals production (UPCYCLING)” project PID2023-147160OB-C21. Moreover, this work was carried out within the framework of the Multiscale Center of Excellence, funded by the Marí a de Maeztu Program for Units of Excellence (CEX2023-001300-M), supported by MCIN/AEI/Ministerio de Universidades, Spain and the Catalan Government through the Riis research group (2021-SGR-GRC-01041) and the R2EM group (2021-SGR-GRC-00596). Support for the research of J.L. Cortina was also received through the “ICREA Academia” recognition for excellence in research funded by the Generalitat de Catalunya. The authors also acknowledge Minera Los Frailes for providing the AMW samples for performing the experimental work., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Towards sustainable recovery of rare earth elements from acidic mine waters: a circular treatment approach integrating selective precipitation and ion exchange

  • Roa Torres, Alexandra
  • López Rodríguez, Julio
  • Cortina Pallás, José Luis
Acidic Mine Waters (AMWs) pose a great environmental risk due to their acidity and metal content. Traditional treatments neutralize acidity but produce hazardous sludge. T his study introduces a sustainable, circular approach for treating AMWs, focusing on recovering valuable Rare Earth Elements (REEs) and other Critical Raw Materials (CRMs). Using AMWs from the Aznalcóllar Open Pit (SW, Spain), metals like Fe, Al, and Zn were removed through precipitation and sulfide formation, achieving >99% efficiency. Ion exchange resins separated heavy and light REEs, which were recovered as >90% pure oxalates. This eco-friendly process minimizes sludge, mitigates pollution, and supports CRM demand, demonstrating global applicability., This project has been financed by the Spanish Agency of Research (AEI) through the REEsources (PDC2021120869-I00), UPCYCLING (PID2023-147160OB-C21) and MET4LIBS (TED2021-131583B-I00) projects., as well as by the REEcovery project (PN-21033) financed by the EIT-Raw Materials. The work of A. Roa was supported by the Ministerio de Ciencia e Innovación (MCIN) and the AEI within the scope of the grant PRE2021-097794. Support for the research of J.L. Cortina was also received through the “ICREA Academia” recognition for excellence in research funded by the Generalitat de Catalunya. Additionally, the authors acknowledge the project CEX2023-001300-M funded by MCIN/AEI/10.13039/501100011033. Finally, the Catalan Government (ref. 2021-SGR-596) is also acknowledged. The authors also acknowledge Minera Los Frailes for providing the AMWs., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

MLA-based characterization of fine iron sulfide particles and implications for critical metal recoveries

  • Escalante Salcedo, Percy Rodrigo
  • Oliva Moncunill, Josep
  • Anticoi Sudzuki, Hernán Francisco
  • Hoffmann Sampaio, Carlos
  • Ochoa Freire, Gladys Alfonsina
  • Cortina Pallás, José Luis
Mineral Liberation Analysis (MLA) was applied to characterize a massive iron sulfide ore (FeS2) with the aim of assessing the recovery potential of critical metals, including copper, cobalt, zinc and manganese, in fine particles (<100 µm). The study focuses on particle attributes relevant to froth flotation, emphasizing the role of size, shape and mineral liberation. The results indicate a predominantly moderate recovery potential, with most recoveries ranging from 40 wt% to 70 wt%, associated with increased free surface area of mineral particles. Quantitative shape analysis reveals that particles with lower circularity and slightly elongated morphologies exhibit more favorable flotation behavior. These findings highlight the importance of detailed particle-scale characterization for understanding and optimizing the processing response of fine-grained, low-grade sulfide ores, contributing to improved flotation performance through a structure–property–process approach., The authors would like to thank the financial support provided by the METALLICO HE project (GA: 101091682) and by the Spanish Research Agency (AEI) through the UPCYCLING project PID2023-147160OB-C21. Moreover, this work is part of Maria de Maeztu Units of Excellence Programme CEX2023-001300-M / funded by MICIU/AEI /10.13039/501100011033, and the Catalan Government through the Riis research group (2021SGR-GRC-01041) and the R2EM group (2021- SGR-GRC-00596). Support for the research of J.L. Cortina was also received through the “ICREA Academia” recognition for excellence in research funded by the Generalitat de Catalunya. The authors also acknowledge Tharsis Mining for providing the samples for performing the experimental work., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Evaluation of nanofiltration membranes for promoting water reclamation in gypsum saturated acidic mine waters

  • Roa Torres, Alexandra
  • López Rodríguez, Julio
  • Cortina Pallás, José Luis
Acidic Mine Waters (AMWs) are still considered the largest environmental challenge to be solved in the global mining industry. Even though there are treatment options for them, nowadays, the efforts are moving towards the implementation of membrane-based management schemes to treat AMW. More precisely, they are providing the possibilities to concentrate and recover valuable metals (e.g. Cu, Zn, Ni, Co, and rare earths), recover sulphate-rich streams and promote water reclamation. This study focuses on the evaluation of three commercially available nanofiltration membranes (NF270, NFX, and PRO-XS2) with synthetic solutions, mimicking different levels of pre-treatment of AMWs: i). containing Na+ and SO42-; ii) containing Ca2+, Na+, and SO42-; and iii) containing Mg2+, Mn2+, Ca2+, Na+, and SO42–. Later, the best-performing membrane was selected to evaluate its performance using a real pre-treated AMW. The results showed that higher fluxes, as well as higher rejections of sulphates/divalent metallic species (>90 %), were attained when the solution was pre-treated for both synthetic and real AMWs. In relation to the membrane performance as a function of permeate recovery, membrane scaling was observed at permeate recoveries higher than 50 %, mostly related to CaSO4:2H2O(s)., This project has been financed by the Spanish Agency of Research (AEI) through the projects Acidic Mining Waters as Resource for Sustainable Supply of Raw and CRMs (REEsources, PDC2021-120869-I00), Development of upcycling approaches in the agri-food and process industries to promote on-site and sustainable chemicals production (UPCYCLING, PID2023-147160OB-C21), and Integration of waste processing technologies to ensure a safe, circular and sustainable battery value chain by promoting urban and industrial mining project (MET4LIBS, TED2021-131583B-I00), and by EIT-Raw Material through the project Metal Influenced Acid Water as a source of valuable and critical raw materials (REEcovery, PN-21033). The work of A. Roa was supported by the Ministerio de Ciencia e Innovación (MCIN) and the AEI within the scope of the grant PRE-2021-097794. Support for the research of J.L. Cortina was also received through the “ICREA Academia” recognition for excellence in research funded by the Generalitat de Catalunya. Additionally, the authors acknowledge the project CEX2023-001300-M funded by MCIN/AEI / 10.13039/501100011033. Finally, the Catalan Government (ref. 2021-SGR-596) is also acknowledged. The authors also acknowledge Minera Los Frailes for providing the AMWs, and to A. Rapti and R. Giovannini for their help during the experimental work., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Integrating water reclamation and electrolysis processes for green hydrogen production: an economic evaluation

  • Vinardell Cruañas, Sergi
  • Cortina Pallás, José Luis
  • Valderrama Ángel, César Alberto
In this work, the production of green hydrogen using an electrolyser fed with the water produced in a water reclamation process was economically evaluated. The water reclamation process was considered to be implemented in a municipal wastewater treatment plant (WWTP) and consisted of an ultrafiltration and multiple-pass reverse osmosis system. The results illustrated that specific water consumption and water production costs featured a minimal impact on the levelized cost of hydrogen (LCOH). Specifically, the LCOH was around 3 €/kgH2 regardless of the water reclamation scenario evaluated. These results point out that the levelized cost of producing hydrogen using water electrolysis would not experience noticeable variations after implementing an advanced water reclamation scheme in a WWTP. Overall, this study highlights the potential of integrating water reclamation and electrolysis processes to improve the sustainability and resource recovery of future WWTPs., The authors acknowledge the Spanish Agency of Research (AEI) through the project development of upcycling approaches in the agri-food and process industries to promote on-site and sustainable chemicals production (UPCYCLING) (PID2023-147160OB-C21) and Catalan Government for the project 2021-SGR-GRC-00596., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Powering renewable hydrogen production with alternative water sources: Is it economically feasible?

  • Vinardell Cruañas, Sergi
  • Cortina Pallás, José Luis
  • Valderrama Ángel, César Alberto
Limited access to freshwater is a barrier to implement water electrolysis processes regardless of the availability of renewable energy sources. The present work aims to evaluate the economic potential of green hydrogen production using high-quality water produced from alternative water sources. Specifically, the study focuses on two scenarios where desalted water for the electrolyser is produced from either treated urban wastewater or seawater using membrane technologies. The results illustrated that the water reclamation scheme featured substantially lower costs (0.81–1.02 €/m3) than the seawater desalination plant (1.09–1.58 €/m3). However, implementing a water production process before the electrolyser only represented a minor impact (< 2.4 %) on the levelized cost of hydrogen (LCOH) and specific energy consumption of the integrated system, even with water production costs as high as 10 €/m3. The contribution of the specific water consumption to the LCOH ranged between 0.10 and 1.80 % when considering water consumptions between 9 and 15 L/kgH2, respectively. The sensitivity analysis illustrated that the impact of water production on the LCOH was nearly negligible when compared with other operating factors, such as the electrolyser efficiency or the load factor. Overall, this study highlights that water production from alternative water sources has a minimal impact on the economic balance of the electrolyser, making it a viable option to support green hydrogen projects in water-scarce regions., We would like to acknowledge the Spanish Agency of Research (AEI) through the project development of upcycling approaches in the agri-food and process industries to promote on-site and sustainable chemicals production (UPCYCLING) (PID2023-147160OB-C21) funded by MICIU/AEI/10.13039/501100011033 and by FEDER, EU. The authors also acknowledge the Catalan Government for the project 2021-SGR-GRC-00596. Sergi Vinardell is a Serra Húnter fellow. Jose Luis Cortina received support for the research through the “ICREA Academia” recognition for excellence in research funded by the Generalitat de Catalunya. Additionally, the authors acknowledge the project CEX2023-001300-M funded by MCIN/AEI/10.13039/501100011033., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

The concentration of nickel and cobalt from Agios Ioannis laterites by multi gravity separator

  • Eljoudiani, Amina
  • Medeiros Veras, Moacir
  • Hoffmann Sampaio, Carlos
  • Oliva Moncunill, Josep
  • Tampouris, Stylianos
  • Cortina Pallás, José Luis
Asbolane represents a strategic secondary source of cobalt (Co) and manganese (Mn), both of which are essential for the production of high-performance alloys and batteries. In order to conserve high-grade resources, it is crucial to improve the utilization of low-grade ores, which typically contain 1.2% Co and ~14.7% Mn. However, the fine grinding required for these ores poses significant challenges for conventional gravity separation. This study hypothesizes that the Multi Gravity Separator (MGS) can effectively process finely disseminated asbolane ore associated with various gangue minerals. The research was conducted by testing two size fractions (-100 +50 µm and -50 µm from Agios Ioannis laterite in Greece) at the UPC/Bases Manresa Mineral Processing Laboratory, with the primary focus being the optimization of drum speed, Tilt L angle, and wash water flow. The aim of the study was to determine the impact of these three critical variables on the grade, recovery, and separation efficiency of the ore. The analysis was further enhanced by the implementation of response surface methodology (MGS) utilizing Python design. The findings suggest that it is feasible to enhance low-grade asbolane ore from a feed containing 2.6% Co and 32.5%, achieving an acceptable recovery of 82.1%. The optimization of process variables was conducted for each response, with the optimization of each response being conducted independently of the other responses. Further optimization of the variables was carried out with a multi-objective target, demonstrating its potential for efficient recovery from complex, low-grade ores while reducing overgrinding energy loss., The authors thank the company GMMSA Larco for the samples provided. This work was supported by the METALLICO project and by the development of upcycling approaches in the agri-food and process industries to promote on-site and sustainable chemicals production (Upcycling) project (PID2023-147160OB-C21), financed by the Spanish Research Agency (Agencia Estatal de Investigación, AEI)., This research was funded by the following project: 101091682-Metallico-HORIZON-CL4-2022-RESILIENCE-01., Peer Reviewed, Postprint (published version)