Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Anderson disorder related p-type conductivity and metal-insulator transition in β-Ga2O3

  • Chi, Zeyu
  • Park, Se-Rim
  • Burdiladze, Luka
  • Tchelidze, Tamar
  • Chauveau, Jean-Michel
  • Dumont, Yves
  • Koo, Sang-Mo
  • Kushitashvili, Zurab
  • Bibilashvili, Amiran
  • Guillot, Gérard
  • Pérez-Tomás, Amador
  • Tsai, Xin-Ying
  • Tarntair, Fu Gow
  • Horng, Rayhua
  • Chikoidze, Ekaterine
The p-type doping is one of the main challenges of the emerging semiconductor β-Ga2O3 technology. Phosphorus (P) implantation has been recently reported as a novel route to achieve p-type conduction on Ga2O3 at room temperature. Here, P-implanted epilayers, grown onto c-plane sapphire revealed a pseudo-metallic behavior (ρ = 1.3–0.3 Ω cm) in the 300–600 K range with a hole carrier concentration of p ⁓ 4–6 × 1018 cm−3 and hole mobility of μ = 1.2–2.1 cm2/(V·s). At sufficiently low temperature, a metal-insulator transition arises together with an increase in the positive magnetoresistance, reaching up to 200 % (9 T) large positive magneto resistance effect at 2 K. It is suggested that an Anderson delocalization model explains the room temperature conduction, and the transition to an insulator state caused by random variation of potential related to the incorporated phosphorous in Ga2O3. We believe that the lack of shallow acceptors can be mitigated by promoting Anderson disorder through the incorporation of a high level of acceptor impurities., The present work is a part of “GALLIA” International Research Project, CNRS, France. GEMaC colleagues acknowledge financial support of French National Agency of Research (ANR), project "GOPOWER", CE-50 N0015-01. This work was partially funded by the France 2030 programme "ANR-11-IDEX-0003″ via Integrative Institute of Materials from Paris-Saclay University - 2IM@UPSaclay. This work was partially funded by EU HORIZON-CL5-2024-D3-01 Safer and More Reliable WBG/UWBG-Based MVDC Power Converters (SAFEPOWER) 101172940. We would acknowledge: GEMaC colleagues Dr.François Jomard and Dr. Estelle Loire contribution with SIMS analysis and David Hrabovsky, Sorbonne University for the PPMS measurements. This work is partially supported by Shota Rustaveli National Science Foundation of Georgia, Grant Number STEM-22-188, the Spanish Maria de Maeztu grant CEX2023-001397-M funded by MICIU/AEI/10.13039/501100011033 and project “OptoFET” (No PID2020-117201RB-C22). This study was also supported by National Science and Technology Council, Taiwan, R.O.C., under the grants Nos: 112-2622-E-A49 -011, 112-2221-E-A49-069-MY3., With funding from the Spanish government through the "Unit of Excellence Maria de Maeztu" accreditation (CEX2023-001397-M)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Single-Event Burnout Mitigation in Silicon VDMOS Power Devices: An Electro-Thermal TCAD Study

  • Rodrigo, Eusebio
  • Rebollo, José
  • Jordà, Xavier
  • Camps, José
  • Latorre, Llorenç
  • Vellvehi, Miquel
This article belongs to the Special Issue Radiation Effects of Advanced Electronic Devices and Circuits, 3rd Edition., Single-Event Burnout (SEB) is one of the most critical failure mechanisms in silicon power MOSFETs operating in radiation environments, particularly under heavy-ion irradiation, and often limits device operation through excessive voltage derating. In this work, SEB robustness of a silicon VDMOS power device is investigated using detailed electro-thermal transient simulations. The study evaluates two complementary device-level modifications: the introduction of a buffer layer between the epitaxial layer and the substrate, which has been reported in the past, and a new approach considering the incorporation of a novel highly doped boron BOX implant within the P-body region. Heavy-ion impacts are simulated using a physically based model implemented in SENTAURUS TCAD, accounting for ion energy deposition, impact position, and thermal effects. The results show that the buffer layer increases the second breakdown voltage and can suppress high-current operating points, while the BOX implant raises the parasitic BJT activation threshold by reducing the P-body resistance. When combined, both modifications lead to a significant reduction in the peak temperature reached during after-impact transients, without introducing measurable degradation of static electrical characteristics. These results demonstrate that combining buffer layer engineering with localized P-body resistance reduction is an effective strategy to improve SEB robustness in silicon VDMOS power devices without relying on excessive derating., This work was supported by the Ministry of Science, Innovation and Universities (MICIU), Spain, through the POWERCELLS project (Grant PID2024-160767OB-I00) and the GaO4Power project (Grant PID2023-151481OB-I00). It was also supported by the Horizon Europe programme through the SAFE-POWER project (Grant 101172940), and by Power Electronics S.L. under contract 20243890., Peer reviewed