DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación
Artículo científico (JournalArticle)
Single-Event Burnout Mitigation in Silicon VDMOS Power Devices: An Electro-Thermal TCAD Study
This article belongs to the Special Issue Radiation Effects of Advanced Electronic Devices and Circuits, 3rd Edition., Single-Event Burnout (SEB) is one of the most critical failure mechanisms in silicon power MOSFETs operating in radiation environments, particularly under heavy-ion irradiation, and often limits device operation through excessive voltage derating. In this work, SEB robustness of a silicon VDMOS power device is investigated using detailed electro-thermal transient simulations. The study evaluates two complementary device-level modifications: the introduction of a buffer layer between the epitaxial layer and the substrate, which has been reported in the past, and a new approach considering the incorporation of a novel highly doped boron BOX implant within the P-body region. Heavy-ion impacts are simulated using a physically based model implemented in SENTAURUS TCAD, accounting for ion energy deposition, impact position, and thermal effects. The results show that the buffer layer increases the second breakdown voltage and can suppress high-current operating points, while the BOX implant raises the parasitic BJT activation threshold by reducing the P-body resistance. When combined, both modifications lead to a significant reduction in the peak temperature reached during after-impact transients, without introducing measurable degradation of static electrical characteristics. These results demonstrate that combining buffer layer engineering with localized P-body resistance reduction is an effective strategy to improve SEB robustness in silicon VDMOS power devices without relying on excessive derating., This work was supported by the Ministry of Science, Innovation and Universities (MICIU), Spain, through the POWERCELLS project (Grant PID2024-160767OB-I00) and the GaO4Power project (Grant PID2023-151481OB-I00). It was also supported by the Horizon Europe programme through the SAFE-POWER project (Grant 101172940), and by Power Electronics S.L. under contract 20243890., Peer reviewed