Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Enhancing Supply Chain Efficiency Through Manufacturing Optimisation as a Service (MOaaS)

  • Almendros-Granero, Jordi
  • Mula, Josefa|||0000-0002-8447-3387
  • Poler, R.|||0000-0003-4475-6371
  • Moreno-Malo, Juan
  • Guerrero-Moreno, Blanca María|||0000-0002-8284-501X
  • Guerrero-Martínez, Marta|||0000-0001-8564-9316
[EN] Modern supply chains, particularly for small- and medium-sized enterprises (SMEs), face significant challenges due to globalisation, technological evolution and dynamic market demands. Traditional supply chain management (SCM) systems often fall short in addressing these complexities, especially for SMEs constrained by technological limitations, resource shortages and external pressures. This paper describes C2NET, a cloud-based platform that introduces manufacturing optimisation as a service (MOaaS), which provides businesses with access to advanced optimisation techniques without the need for extensive in-house infrastructure. By leveraging cloud computing, machine learning and collaborative frameworks, C2NET delivers scalable, cost-effective and sector-specific optimisation solutions. Through practical case studies, C2NET demonstrates significant solution development improvements. This work advances the C2NET platform by integrating machine learning-driven optimisation and auto-scaling cloud infrastructures, and by addressing gaps in prior studies that focus solely on algorithmic frameworks. Future implementations aim to integrate simulation tools, advanced machine learning techniques and predictive analytics to further solidify C2NET¿s role as a transformative tool in modern supply chain optimisation. This approach eliminates the need for costly infrastructure investments and specialised information and technology (IT) expertise, which makes advanced optimisation accessible to a broader range of businesses, particularly SMEs., This study was funded by the Horizon Europe Framework Programme (GA No. 101177842) Unified Modelling and Automated Scheduling for Manufacturing as a Service (UniMaaS).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Sustainable optimisation approaches for production planning and control to evolve towards industry 5.0

  • Guerrero-Moreno, Blanca María|||0000-0002-8284-501X
  • Mula, Josefa|||0000-0002-8447-3387
  • Poler, R.|||0000-0003-4475-6371
[EN] Industry 4.0 (I4.0) has led to a very high development potential in the optimisation of production planning and control problems in industrial companies. This study aims to analyse the existing scientific literature on the optimisation of planning, control and management problems, specifically in the production, operations and scheduling areas, to make industry more sustainable in accordance with the I4.0 context; that is, applying new digital technologies and I5.0 by integrating people into this digital transformation. Specifically, 77 research works were identified and analysed. The main findings conclude that the key setting of these optimisation problems lies in manufacturing contexts and highlight the use of modelling and solution techniques through mathematical programming and metaheuristics. These studies, which are mostly empirical, point out different software tools, and underline the use of MATLAB, optimisation with CPLEX, the Python programming language and simulation through AnyLogic. For I4.0 techniques, data analytics and big data, artificial intelligence, the Internet of Things, sensors and simulation and digital twins are the most studied. Proposals addressing worker ergonomics and a three-pillar approach to sustainability are particularly noteworthy. Finally, the main research gaps, challenges and trends for future research are recognised., This work was supported by Generalitat Valenciana: [Grant Number PROMETEO/2021/065]; Horizon 2020 Framework Programme: [Grant Numbers: 101177842 and 101177368]; Ministerio de Ciencia e Innovación: [Grant Number: PDC2022- 133957-I00].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Integrated Methods in Replenishment Planning Processes

  • Andres, B.|||0000-0002-7920-7711
  • MENGUAL RECUERDA, ANA|||0000-0003-4727-9099
  • Pérez-Molina, Ana Isabel|||0000-0002-1266-7027
  • Pérez Bernabeu, Elena|||0000-0002-9221-7623
[EN] Small and medium-sized enterprises (SMEs) face significant chal-lenges in digitalizing decision-making processes, particularly in demand forecast-ing, replenishment, and production planning. This study investigates the appli-cation of integrated methods in replenishment planning. A set of key hybrid approaches employed in replenishment planning, including deep reinforcement learning, hybrid machine learning forecasting models, and optimization model have been identified. The findings indicate that integrating data-driven models with knowledge-based systems enhances decision-making, optimizes inventory levels, and mitigates procurement risks. Despite the benefits of hybrid approaches, fur-ther research is needed to expand integrated replenishment models, particularly for industries with complex supply chains. Future developments should focus on combining rule-based models with AI-driven predictive analytics to improve replenishment efficiency and adaptability in dynamic markets., The research that led to these findings received funding from the Horizon Europe Framework Programme (HORIZON) with Grant Agreement No. 101177368 Agile Manufacturing as a Service through AI Autonomous Agents (MaaSAI) and with Grant Agreement No. 101177842 Unified Modeling and Automated Scheduling for Manufacturing as a Service (UniMaaS). From Aid for First Research Projects (PAID-06-24) and (PAID-11-24), by the Vicerectorate for Research of the Universitat Politècnica de València (UPV) and from Generalitat Valenciana Grants for doctoral researchers to work in companies in the Valencian Community (CIAEST2024/52).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A Conceptual Model to Integrate Operations Strategies Into Circular and Sustainable Global Supply Chains

  • Aldas, Darwin
  • Mula, Josefa|||0000-0002-8447-3387
  • Díaz-Madroñero Boluda, Francisco Manuel|||0000-0003-1693-2876
[EN] Rapidly increasing environmental degradation means that society seeks to adapt its activities to sustainable environments that comply with global requirements and regulations. The need arises to investigate what operations strategies companies use to be productive and sustainable. Currently, there is no conceptual model that integrates environmental sustainability strategies and circular economy principles into the entire supply chain. Here, a conceptual model, dubbed as the circular and sustainable-global supply chain, is proposed. To develop the conceptual proposal, a methodology consisting of the following phases was used: visualisation, analysis, conceptualisation, modelling, validation and proposal. According to the main literature review findings, the strategies of sustainable and circular operations most widely used by companies are defined. Then, the proposed model integrates these strategies at all supply chain levels, which are analysed based on sustainability dimensions by identifying inputs, outputs, drivers, constraints and external factors. Finally, the model is validated in six companies in the bus manufacturing industry in terms of levels of compliance and feasibility of applying the model's elements., This work was supported by the HORIZON EUROPE Framework Programme (101177842, 101138789). The Spanish Ministerio de Ciencia e Innovacion (PDC2022-133957-I00). The Generalitat Valenciana (PROMETEO/2021/065).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Impact of generative artificial intelligence on workload, efficiency and labour productivity

  • Caamaño-Gordillo, Daniel
  • Mula, Josefa|||0000-0002-8447-3387
  • Torre-Martínez, María Rocío de la|||0000-0002-8662-8901
[EN] In recent years, generative artificial intelligence (GAI) has gained significant importance in production and operations management (POM) due to its potential to enhance worker productivity. This article aims to characterise the impact of GAI on workload, efficiency and labour productivity across various industries. The research question was formulated and, using the CIMO framework (context, intervention, mechanism, outcome), the search and retrieval of articles were conducted in the Scopus and Web of Science (WoS) databases, and yielded 149 articles. After the selection, evaluation and content analysis of each study, 74 articles were ultimately included in the systematic literature review. Seven industries were identified in which GAI has demonstrated impacts on workload, efficiency and labour productivity, with four sectors accounting for 80% of the studies. The impacts of GAI reveal four trends, all of them key in POM: automation and optimisation of workflows; support in decision making; improvement in human-machine interactions; enhancement in communication. To fully apply the potential of this technology, it is necessary to continue researching and addressing the identified issues, including ethical, employment, privacy and information quality challenges., This work has been supported by Horizon Europe Framework Programme (HORIZON) with grant agreements: 101092612 Social and hUman ceNtered XR (SUN XR); and 101177842 Unified Modelling and Automated Scheduling for Manufacturing as a Service (UniMaaS).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Toward lean industry 5.0: a human-centered model for integrating lean and industry 4.0 in an automotive supplier

  • Hines, Peter
  • Magnani, Florian
  • Mula, Josefa|||0000-0002-8447-3387
  • Sanchis, R.|||0000-0002-5495-3339
[EN] This paper proposes a human-centered conceptual model integrating lean and Industry 4.0 based on the literature review and validated it through a case study in the context of an advanced automotive first-tier supplier. Addressing a significant gap in existing research on lean Industry 4.0 implementations, the study provides both theoretical insights and practical findings. It emphasises the importance of a human-centered approach, identifies key enablers and barriers. In the implementation process of the case study, it is considered at group level and model site level through operational, social and technological perspectives in a five-phase multi-method approach. It shows what effective human-centered lean Industry 4.0 implementation look like and how advanced lean tools can be digitised. It highlights 26 positive and 10 negative aspects of the case and their causal relation. With the appropriate internal and external technological know-how and people skills, it shows how successful implementation can benefit the organisation and employees based on the conceptual model that serves as a first step toward lean Industry 5.0., The research that led to these findings received funding from the MCIN/AEI/10.13039/501100011033 and by European Union Next Generation EU/PRTR with grant agreement PDC2022-133957-I00 (CADS4.0-II); the Regional Department of Innovation, Universities, Science and Digital Society of the Generalitat Valenciana entitled "Industrial Production and Logistics Optimization in Industry 4.0" (i4OPT) (Ref. PROM-ETEO/2021/065); and the Horizon Europe Framework Programme (HORIZON) with Grant Agreement No. 101177842 "Unified Modeling and Automated Scheduling for Manufacturing as a Service" (UniMaaS) and Grant Agreement No. 101177368 "Agile Manufacturing as a Service through AI Autonomous Agents" (MaaSAI).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Adopting Lean Industry 4.0: insights from Spanish manufacturing SMEs in an international context

  • Guerrero-Moreno, Blanca María|||0000-0002-8284-501X
  • Mula, Josefa|||0000-0002-8447-3387
  • Poler, R.|||0000-0003-4475-6371
  • Hines, Peter
  • Kumar, Maneesh
[EN] Lean approaches and Industry 4.0 (I4.0) offer a wide horizon of possibilities for improving production management efficiency. This study aims to analyse the state of lean I4.0 (LI4.0) in Spain's SMEs and compare it to the international context, i.e. other European countries and outside Europe. It analyses seven different aspects (departments involved, implementation maturity, motivations, maturity assessments and roadmap, enablers and challenges, people skills and competences, and institutional support) by a qualitative 29-question open-ended survey, answered by 179 Spanish SMEs, 123 from other European countries and 80 global companies, all from the secondary sector with fewer than 250 employees. The main findings highlight the need for context-specific approaches for LI4.0 adoption, noting that Spain's approach differs from broader European and global trends by implementing lean and I4.0 simultaneously. Key enablers include employee commitment and a stronger focus on market needs. Increased government support could enhance adoption in Spain, while global efforts seek to address post-implementation knowledge gaps and integration support. These outcomes can provide SMEs with future research and effective support in their search for efficiency through LI4.0, and also guide third-party support agencies, particularly national and regional governmental bodies., The research that has led to the present results has received funding from: the Generalitat Valenciana project INVEST/2022/249, within the framework of the European Union Next Generation EU/PRTR; the MCIN/AEI/10.13039/501100011033 and by European Union Next Generation EU/PRTR with grant agreement PDC2022-133957-I00 (CADS4.0-II); the Generalitat Valenciana with grant agreement PROMETEO/2021/065 (i4OPT); and the European project with grant number 101177842 (UniMaaS).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Enhancing supply chain antifragility in the face of uncertainty: an AI-driven approach in a circular intuitionistic fuzzy environment

  • Yazdani, Morteza
  • Alimohamadlou, Moslem
  • Mula, Josefa|||0000-0002-8447-3387
  • Díaz-Madroñero Boluda, Francisco Manuel|||0000-0003-1693-2876
[EN] Today's world faces numerous and complex challenges, including natural disasters, pandemics and geopolitical instability, which expose organizations to unprecedented levels of uncertainty and pressure. This article examines the antifragility concept as an approach to enhance supply chain resilience against such shocks. Using AI-driven approaches within a circular intuitionistic fuzzy framework, practical solutions for implementing antifragility in supply chains under uncertainty conditions are presented., The research leading to these results received funding from grants: PDC2022-133957-I00 funded by MCIN/AEI /10.13039/501100011033 and by European Union Next GenerationEU/PRTR (CADS4.0-II); and the HORIZON European project with grant number 101177842 (UniMaaS).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A Graph-Based Conceptual Model for MILP Modeling

  • Moreno-Malo, Juan
  • Mula, Josefa|||0000-0002-8447-3387
  • Poler, R.|||0000-0003-4475-6371
  • Almendros-Granero, Jordi
[EN] Production and supply chain optimization problems have grown increasingly complex due to advancements in computing power and mixed-integer linear programming (MILP) solvers. Algebraic modeling languages (AMLs) such as Pyomo, JuMP, AMPL and GAMS, enable researchers and practitioners to describe these problems in a high-level, declarative fashion in a given programming language. This paper presents a comparative analysis of these AMLs with an emphasis on their use in real-world problems. A conceptual framework that empowers traditional modeling languages is presented as a potential graph-based MILP modeling platform. It enables the creation of sets, variables, constraints and objectives as nodes on graph. A visual equation editor is proposed to increase the visibility, explainability and the modeling process. The framework also provides a solver and AML agnostic interfaces by allowing users to seamlessly switch between different solving environments. The article concludes with a discussion of further research directions., This study was funded by the Horizon Europe Framework Programme (GA No. 101177842) Unified Modeling and Automated Scheduling for Manufacturing as a Service (UniMaaS).