Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Study of light penetration depth of a Vis-NIR hyperspectral imaging system for the assessment of fruit quality. A case study in persimmon fruit

  • Rodriguez-Ortega, Alejandro|||0000-0003-4781-6368
  • Aleixos Borrás, María Nuria|||0000-0001-6051-3375
  • Albert Gil, Francisco Eugenio|||0000-0001-9452-614X
  • Munera, S|||0000-0003-3064-1186
  • Blasco, José
[EN] Hyperspectral imaging (HSI) is one of the most studied optical techniques to estimate the internal quality of fruits and vegetables. Absorbance and reflectance of the light radiation are specific to each biological tissue and are directly related to its chemical composition and physical characteristics. These properties are influenced by other extrinsic factors, such as the instrumentation or the light source, which can reduce the reproducibility of the experiments. Determining the actual depth of light penetration into tissue could help validate non-contact methods as accurate tools to assess quality properties based on optical properties. In the case of HSI systems, it is crucial to know how far the light penetrates at each wavelength. A non-destructive approach, based on the spatially resolved spectroscopic principle, was proposed to estimate the light penetration depth of a HSI system in a Vis-NIR configuration (in the range 450-1050 nm). This method was applied to measure the light penetration depth in persimmon fruit. The absorption (mu(a)) and scattering (mu'(s)) coefficients from Farrell's diffusion theory were estimated using the backscattered light measured at different distances from the incident point light at each wavelength in hyperspectral images of persimmon fruit. The actual light penetration depth was obtained by measuring the reflectance of cut pieces of persimmon fruit with different thicknesses. Linear regression was used to relate the depth of penetrability obtained by both protocols, the estimated or non-destructive protocol and the actual or destructive protocol, showing a high relationship (R-2 > 0.8 and RPD>2.5) in the range 610-1050 nm. This confirms that this non-destructive approach proposed for estimating the light penetration depth of a Vis-NIR HSI system in persimmon fruit is accurate, so it could be used as a valuable method to evaluate other HSI systems for different fruits., This work was co-funded by the projects AEI PID 2019-107347RRC31 and PID 2019-107347RR-C32, and GVA-PROMETEO CIPROM/2021/014. Sandra Munera thanks the postdoctoral contract Juan de la Cierva-Formacion (FJC2021-047786-I) co-funded by MCIN/AEI/ 10.13039/501100011033 and NextGenerationEU/PRTR.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Detection of Invisible Damages in `Rojo Brillante¿ Persimmon Fruit at Different Stages Using Hyperspectral Imaging and Chemometrics

  • Munera, S|||0000-0003-3064-1186
  • Rodriguez-Ortega, Alejandro|||0000-0003-4781-6368
  • Aleixos Borrás, María Nuria|||0000-0001-6051-3375
  • Cubero, Sergio
  • Gómez-Sanchis, Juan
  • Blasco, José
[EN] The main cause of flesh browning in 'Rojo Brillante' persimmon fruit is mechanical damage caused during harvesting and packing. Innovation and research on nondestructive techniques to detect this phenomenon in the packing lines are necessary because this type of alteration is often only seen when the final consumer peels the fruit. In this work, we have studied the application of hyperspectral imaging in the range of 450-1040 nm to detect mechanical damage without any external symptoms. The fruit was damaged in a controlled manner. Later, images were acquired before and at 0, 1, 2 and 3 days after damage induction. First, the spectral data captured from the images were analysed through an algorithm based on principal component analysis (PCA). The aim was to automatically separate intact and damaged fruit, and to detect the damage in the PC images when present. With this algorithm, 90.0% of intact fruit and 90.8% of damaged fruit were correctly detected. A model based on partial least squares-discriminant analysis (PLS-DA), was later calibrated using the mean spectrum of the pixels detected as damaged, to determine the moment when the fruit was damaged. The model differentiated fruit corresponding correctly to 0, 1, 2 and 3 days after damage induction, achieving a total accuracy of 99.4%., This work is co-funded by the projects AEI PID2019-107347RR-C31, PID2019-107347RR-C32, PID2019-107347RR-C33, IVIA-GVA 51918 and the European Union through the European Regional Development Fund (ERDF) of the Generalitat Valenciana 2014-2020.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Nir Spectral Techniques and Chemometrics Applied to Food Processing

  • Teixeira Badaró, Amanda
[ES] Las técnicas rápidas, no destructivas y libres de químicos tienen una demanda creciente en muchos campos de la industria. Las técnicas de espectroscopia de infrarrojo cercano (NIRS) y imágenes hiperespectrales NIR (NIR-HSI) han mostrado un gran potencial para determinar los parámetros de calidad de los alimentos, autenticar productos alimenticios, detectar el fraude, entre otras. En la NIRS, las medidas se toman en puntos específicos, detectando solo una pequeña porción; en la NIR-HSI, la información espectral y espacial se combinan, lo que la convierte en una opción adecuada para muchos productos alimenticios, ya que son matrices muy heterogéneas. Por lo tanto, este estudio tuvo como objetivo revisar la aplicación de NIRS (dispersivos), NIR de Transformada de Fourier (FT) y HSI en la evaluación de los parámetros de calidad de harina de trigo y productos a base de trigo, así como para la autenticación y determinación de la composición de estos productos. Además, este trabajo tuvo como objetivo identificar y clasificar diferentes tipos de muestras de fibra agregadas a la semolina y pasta producidas por estas formulaciones, y monitorear el proceso de cocción de esta pasta enriquecida en fibra mediante técnicas espectrales. Además, se objetivó aplicar HSI a otro producto en polvo, por lo que se cuantificó el contenido de pectina en las cáscaras de naranja. Primero, se adquirieron espectros NIR para comparar la precisión en la clasificación de muestras enriquecidas con fibra, para cuantificar la cantidad de estas fibras y verificar su distribución en muestras de semolina. Para la clasificación se utilizaron el Análisis de Componentes Principales (PCA) y el Soft Independent Modelling of Class Analogy (SIMCA). Los modelos de regresión de mínimos cuadrados parciales (PLSR) aplicados a espectros NIR-HSI mostraron R²P entre 0,85 y 0,98 y RMSEP entre 0,5 y 1, y los modelos se utilizaron para construir los mapas químicos para verificar la distribución de fibra en las superficies de las muestras. Además, se probó el NIR-HSI junto con Multivariate Curve Resolution-Alternating Least Squares (MCR-ALS) para investigar la capacidad de evaluación, resolución y cuantificación de la distribución de fibra en la pasta. Los resultados mostraron R²P entre 0.28 y 0.89,% de falta de ajuste (LOF) <6%, varianza explicada sobre 99% y similitud entre espectros puros y recuperados sobre 96% y 98%. Además, se probó VIS/NIR-HSI en el modo de transmisión como una alternativa objetiva para la clasificación de muestras de pasta según el tiempo de cocción. El análisis discriminante lineal (LDA) mostró valores de sensibilidad y especificidad entre 0,14-1,00 y 0,51-1,00, respectivamente, y una tasa de ausencia de error (NER) superior a 0,62. El análisis discriminante de mínimos cuadrados parciales (PLSDA) mostró valores de sensibilidad y especificidad entre 0,67-1,00 y 0,10-1,00, respectivamente, y NER superiores a 0,80. Los resultados de este trabajo mostraron que la técnica NIR-HSI se puede utilizar para la identificación y cuantificación de la fibra agregada a la semolina. Además, NIR-HSI y MCR-ALS pueden identificar la fibra en la pasta. La HSI en el modo de transmisión demostró ser una técnica adecuada como alternativa objetiva para la clasificación de muestras de pasta según el tiempo de cocción como una forma de automatizar la determinación de los atributos de la pasta. La determinación del contenido de pectina en cáscaras de naranja se investigó usando NIR-HSI. LDA mostró mejores resultados de discriminación considerando tres grupos: bajo (0-5%), intermedio (10-40%) y alto (50-100%) contenido. Los modelos PLSR basados en espectros completos mostraron mayor precisión (R2> 0,93, RMSEP entre 6,50 y 9,16% de pectina) que los basados en pocas longitudes de onda seleccionadas (R2 entre 0,92 y 0,94, RMSEP entre 8,03 y 9,73% de pectina). Los resultados demuestran el potencial de NIR-HSI para cuantificar el contenido de pectina en las cáscaras de naranja, proporcionando una técnica valiosa para los productores de naranja y las industrias de procesamiento., [CA] Les tècniques ràpides, no destructives i lliures de químics tenen una demanda creixent en molts camps de la indústria. Les tècniques d'espectroscopia d'infraroig proper (NIRS) i d'imatges hiperespectrals NIR (NIR-HSI) han demostrat tindre un gran potencial per a determinar paràmetres de qualitat d'aliments, autenticar productes alimentaris, detectar frau entre altres aplicacions. Mentre que en la NIRS proper les mesures es prenen en punts específics de la mostra i es detecta una porció menuda, en la HSI es combina informació espectral i espacial de tal manera que és una opció adient per a molts tipus de productes alimentaris, ja que són matrius molt heterogènies. Per tant, este estudi va tindre com objectiu revisar tota l'aplicació de NIRS (dispersius), NIR de Transformada de Fourier (FT) i HSI en l'avaluació dels paràmetres de qualitat de la farina de blat i els productes a base de blat, així com per a l'autenticació i determinació de la composició d'estos productes. A més a més, este estudi va tindre com objectiu identificar i classificar diferents tipus de mostres de fibra afegides a la semolina i pasta produïdes per formulació de fibra i semolina, i monitorar mitjançant tècniques espectrals el procés de cocció d'aquesta pasta enriquida amb fibra. A més, este treball va tindre com objectiu aplicar HSI a un altre producte en pols, de tal manera que es va quantificar el contingut de pectina en les corfes de taronja. Primer, es van adquirir espectres NIR per comparar la precisió en la classificació de mostres enriquides amb fibra, per quantificar estes fibres i verificar la seua distribució en mostres de sèmola. Per a la classificació es van emprar l'Anàlisi de Components Principals (PCA) i el SIMCA (Soft Independent Modelling of Class Analogy). Els models de regressió de mínims quadrats parcials (PLSR) aplicats a espectres NIR-HSI mostraren R²P entre 0,85 i 0,98 i RMSEP entre 0,5 i 1% de contingut de fibra, i els models s'utilitzaren per construir els mapes químics per verificar la distribució de fibra en les superficies de les mostres. Així mateix, es va provar NIR-HSI amb Multivariate Curve Resolution-Alternating Least Square (MCR-ALS) per a investigar la capacitat d'avaluació, resolució i quantificació de la distribució de fibra en la pasta enriquida. Els resultats mostraren un R²P entre 0,28 i 0,89%, lack of fit (LOF)<6%, variància explicada sobre 99% i similitud entre espectres purs i recuperats sobre 96% i 98%. D'altra part, es va provar VIS/NIR-HSI en el mode de transmissió com una alternativa objectiva per a la classificació de mostres de pasta segons el temps de cocció. L'anàlisi discriminant lineal (LDA) va mostrar valors de sensibilitat i especificitat entre 0,14-1,00 i 0,51-1,00 respectivament, i una taxa d'absència d'error (NER) superior a 0,62. L'anàlisi discriminant de mínims quadrats parcials (PLSDA) va mostrar valors de sensibilitat i especificitat entre 0,67-1,00 i 0,10-1,00 respectivament, i NER superiors a 0,80. Els resultats d'este treball mostraren que la tècnica NIR-HSI es pot emprar per a la identificació i quantificació de la fibra afegida a la semolina. A més a més, NIR-HSI i MCR-ALS poden identificar la fibra en la pasta. La HSI en mode de transmissió va demostrar ser una tècnica adient com a alternativa objectiva per a la classificació de mostres de pasta segons el temps de cocció com forma d'automatitzar la determinació dels atributs de la pasta. La determinació del contingut de pectina en corfa de taronja es va investigar emprant NIR-HSI. LDA va mostrar millors resultats de discriminació considerant tres grups: baix (0-5%), intermedi (10-40%) i alt (50-100%). Els models PLSR basats en espectres complets van mostrar major precisió (R2> 0,93, RMSEP entre 6,50 i 9,16% de pectina) que els basats en longituds d’ona seleccionades (R2 entre 0,92 i 0,94, RMSEP entre 8,03 i 9,73% de pectina). Els resultats demostren el potencial de NIR-HSI per a quantificar el contingut de pectina en corfa de taronja i proporcionen una tècnica valuosa per als productors de taronja i les indústries de processament., [EN] Fast, non-destructive and chemical-free techniques are in increasing demand in many fields of the industry. Near-infrared spectroscopy (NIRS) and NIR hyperspectral imaging (NIR-HSI) techniques have shown great potential in determining food quality parameters, authenticating food products, detecting food fraud, among many other applications. While in near infrared spectroscopy, the measurements are taken at specific points on the sample, detecting only a small portion; in hyperspectral imaging, spectral and spatial information are combined, making it a suitable choice for many food products, since they are very heterogeneous matrices. Therefore, this study aimed to review all the application of (dispersive) NIRS, Fourier Transform (FT) NIR, and HSI in assessing wheat flour and wheat-based products quality parameters, as well for the authentication and determination of composition of these products. Moreover, this work aimed to identify and classify different types of fibre samples added to the semolina and pasta produced by semolina-fibre formulations, and to monitor the cooking process of this fibre-enriched pasta by spectral techniques. In addition, this work had the aim of applying HSI to other powdered product, so the pectin content in orange peels was quantified. First, NIR spectra were acquired to compare the accuracy in the classification of fibre-enriched samples, to quantify the amount of these fibres and verify their distribution on semolina samples. Principal Component Analysis (PCA) and Soft Independent Modelling of Class Analogy (SIMCA) were used for classification. Partial Least Squares Regression (PLSR) models applied to NIR-HSI spectra showed R2P between 0.85 and 0.98, and RMSEP between 0.5 and 1% of fibre content, and the models were used to construct the chemical maps to check the fibre distribution on the samples surface. Moreover, NIR-HSI together with Multivariate Curve Resolution-Alternating Least Squares (MCR-ALS), was tested to investigate the ability for the evaluation, resolution and quantification of fibre distribution in enriched pasta. Results showed coefficient of determination of validation (R²V) between 0.28 and 0.89, % of lack of fit (LOF) <6%, variance explained over 99%, and similarity between pure and recovered spectra over 96% and 98% in models using pure flour and control as initial estimates, respectively. In addition, VIS/NIR-HSI in the transmission mode was tested as an objective alternative for the classification of pasta samples according to cooking time as way of automating the determination of pasta attributes. Linear Discriminant Analysis (LDA) showed values of sensitivity and specificity between 0.14-1.00 and 0.51-1.00, respectively, and non-error rate (NER) over 0.62. Partial Least Square Discriminant Analysis (PLSDA) showed values of sensitivity and specificity between 0.67 - 1.00 and 0.10-1.00, respectively, and NER over 0.80. The results of the first part of this work showed that NIR-HSI technique can be used for the identification and quantification of fibre added to semolina. Additionally, NIR-HSI and MCR-ALS are able to identify fibre in pasta. Hyperspectral imaging in the transmission mode demonstrated to be a suitable technique as an objective alternative for the classification of pasta samples according to the cooking time as a way of automating the determination of pasta attributes. Determination of pectin content in orange peels was investigated using NIR-HSI. LDA showed better discrimination results considering three groups:low(0-5%), intermediate(10-40%) and high(50-100%) pectin content. PLSR models based on full spectra showed higher precision (R²>0.93, RMSEP between 6.50 and 9.16% of pectin) than those based on few selected wavelengths (R² between 0.92 and 0.94, RMSEP between 8.03 and 9.73%). The results demonstrate the potential of NIR-HSI to quantify pectin content in orange peels, providing a valuable technique for orange producers and processing industries., This work was supported by the Coordenação de Aperfeiçoamento de Pessoal de Nível Superior- Brasil (CAPES) [Finance Code 001]; São Paulo Research Foundation (FAPESP) [grant numbers 2015/24351-2, 2017/17628-3, 2019/06842- 0]; and by projects AEI PID2019-107347RR-C31 and PID2019-107347RR-C32, and the European Union through the European Regional Development Fund (ERDF) of the Generalitat Valenciana 2014-2020. The authors would like to thank Nutrassim Food Ingredients company for the donation of the fibre samples, the support provided by Enrique Aguilar María, Carlos Alberto Velasquez Hernández, Diego Hernández Catalán, Carlos Ruiz Catalá and Andrés Estuardo Prieto López during system installation, experimental analysis and data acquisition.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Enhancing anthracnose detection in mango at early stages using hyperspectral imaging and machine learning

  • Velásquez, Carlos
  • Cubero, Sergio
  • Gomez-Sanchis, Juan
  • Prieto, Flavio
  • Blasco, José
  • Aleixos Borrás, María Nuria|||0000-0001-6051-3375
[EN] Anthracnose, caused by Colletotrichum sp. infections, poses a significant threat to mango production worldwide, resulting in substantial losses. This devastating disease is challenging to detect and control, primarily due to its ability to spread rapidly. The methods currently used to control anthracnose are primarily corrective, relying on disease detection in the late stages when the infection becomes visible. Hence, there is a need for tools to detect the infection at early stages, before symptoms appear. Hyperspectral imaging systems are promising for developing non-destructive solutions to assess and detect external and internal damage in fruit, including decay caused by anthracnose. These advanced imaging systems make early detection possible before the symptoms are visible, allowing for timely intervention and potentially more effective disease control. This work aims to evaluate the possibility of early detection of anthracnose in two mango cultivars using hyperspectral imaging and machine learning methods. Secondly, to establish correlations between specific wavelengths and the physicochemical symptoms associated with anthracnose. Lastly, to develop a robust model for the spectral detection of anthracnose on mango fruit. Mangoes were inoculated with spores of Colletotrichum gloeosporioides. Hyperspectral images of control and infected fruit were captured in the 450-970 nm spectral range. Five machinelearning models were used to obtain the method that best fits the spectral data. The best model achieved an accuracy = 0.961, recall = 0.961, specificity = 0.992, F1 = 0.961 and Matthews correlation coefficient (MCC) = 0.953 for 'Keitt', and an accuracy = 0.975, recall = 0.976, specificity = 0.995, F1 = 0.975 and MCC = 0.971 for 'Osteen', showing the feasibility to detect early anthracnose infection in mango fruit within 48 h after pathogen inoculation., This work was partially funded by the Ministerio de Ciencia y Tecnologia de Colombia (MINCIENCIAS) through its call "convocatoria 785 para doctorados nacionales 2017", Universidad Nacional de Colombia through its programmes "convocatoria nacional para el fomento de alianzas interdisciplinarias queue articulen investigacion, creacion, extension y formacion en la Universidad Nacional de Colombia 2019-2021" and through MICIN-AEI projects PID2019-107347RR-C31- C32-C33 with ERDF funds of the GVA 2021-2027, and GVA-PROMETEO CIPROM/2021/014. Authors thank Prof Dr Lluis Palou and Veronica Taberner, from the Postharvest Technology Center (CTP) of the IVIA, for providing the inoculum and technical suport.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Using Vis/NIR hyperspectral imaging and wavelength selection for accurate postharvest discrimination of loquat cultivars of similar appearance

  • Castillo-Gironés, Salvador
  • Cubero-García, Sergio
  • López-Chulià, Marina
  • Martínez-Onandi, Nerea
  • Blasco Ivars, Jose
  • Munera, S|||0000-0003-3064-1186
  • Rodriguez-Ortega, Alejandro|||0000-0003-4781-6368
  • Aleixos Borrás, María Nuria|||0000-0001-6051-3375
[EN] Fruit cultivars of similar appearance can be mixed in postharvest and sold as the same, whereas their quality might differ considerably. These differences in quality between cultivars can lead to rejection by consumers if the fruit does not meet their expectations. Thus, confusion must be avoided. Destructive methods to analyse composition are expensive and cannot be performed on all fruits. Alternatively, hyperspectral imaging is a non-destructive technology that has already been used to assess the internal quality of fruit. `Algerie¿ is a traditional cultivar known for its sweet taste, while `Xirlero¿ is a lower-quality new cultivar. Both cultivars are harvested in the same period and have a similar external appearance, making them difficult to distinguish. This work aims to find a non-destructive way to distinguish between these two cultivars, as the external appearance is similar, but the internal quality differs. 300 samples of `Xirlero¿ loquat and 259 `Algerie¿ were used in the experiments. Samples were harvested weekly in a commercial orchard for five weeks to obtain several maturity levels., This work was partially funded by project AEI PID2019-107347RR-C31, and C32 with the support of FEDER funds and GVA PROMETEO CIPROM/2021/014. Salvador Castillo thanks the MICIN-AEI grant PRE2020-094491, co-funded by EU ESF. Sandra Munera thanks the Juan de la Cierva-Formacio&#769; n (FJC2021-047786-I) co-funded by MCIN/AEI/10.13039/501100011033 and NextGenerationEU/PRTR.
ReDivia Repositorio Digital del Instituto Valenciano de Investigaciones Agrarias
Publicación Artículo científico (JournalArticle)

Quantifying the ultraviolet-induced fluorescence intensity in green mould lesions of diverse citrus varieties: Towards automated detection of citrus decay in postharvest

  • Munera, Sandra
  • Ancillo, Gema
  • Prieto, Andrés
  • Palou, Lluís
  • Aleixos, Nuria
  • Cubero, Sergio
  • Blasco, José
Citrus fungal infections developing during fruit storage and transportation can cause significant economic losses after harvest. The most important is caused by the fungus Penicillium digitatum, which infects the fruit through rind wounds and causes a rot lesion. The symptoms of decay are difficult to notice by the human eye in the initial stages of decay development because the colour of the lesion is very similar to that of the healthy rind. One method to detect this disease early is to illuminate the fruit with ultraviolet (UV) light since the disease causes visible fluorescence. Manual inspection exposes the workers to UV light, which is dangerous for their skin and eyes. An alternative is to use artificial vision systems. But not all varieties show the same level of fluorescence, and even some do not produce this phenomenon, making it challenging to create effective automatic detection systems based on image analysis. This work has studied and determined the fluorescence level of 104 varieties of oranges and mandarins using hyperspectral and colour imaging. The samples were inoculated with spores of the P. digitatum in controlled conditions. Images were captured exposing the fruit under UV light (380 nm) using a colour camera and a hyperspectral imaging system. The fluorescence level of each variety was measured using three colour coordinates and the hyperspectral images. Best correlations between the spectral and the colour-based systems were achieved using the green (G) colour coordinate of the RGB colour space (R2 =0.85). Navel and common oranges emit the most fluorescence, while 16 varieties (mostly blood oranges and other mandarins) have very low or undetectable fluorescence.
ReDivia Repositorio Digital del Instituto Valenciano de Investigaciones Agrarias
Publicación Artículo científico (JournalArticle)

Study of light penetration depth of a Vis-NIR hyperspectral imaging system for the assessment of fruit quality. A case study in persimmon fruit

  • García-García, José
  • Rodríguez-Ortega, Alejandro
  • Aleixos, Nuria
  • Blasco, José
  • Albert, Francisco
  • Munera, Sandra
Hyperspectral imaging (HSI) is one of the most studied optical techniques to estimate the internal quality of fruits and vegetables. Absorbance and reflectance of the light radiation are specific to each biological tissue and are directly related to its chemical composition and physical characteristics. These properties are influenced by other extrinsic factors, such as the instrumentation or the light source, which can reduce the reproducibility of the experiments. Determining the actual depth of light penetration into tissue could help validate non-contact methods as accurate tools to assess quality properties based on optical properties. In the case of HSI systems, it is crucial to know how far the light penetrates at each wavelength. A non-destructive approach, based on the spatially resolved spectroscopic principle, was proposed to estimate the light penetration depth of a HSI system in a Vis-NIR configuration (in the range 450–1050 nm). This method was applied to measure the light penetration depth in persimmon fruit. The absorption (μa) and scattering (μ's) coefficients from Farrell's diffusion theory were estimated using the backscattered light measured at different distances from the incident point light at each wavelength in hyperspectral images of persimmon fruit. The actual light penetration depth was obtained by measuring the reflectance of cut pieces of persimmon fruit with different thicknesses. Linear regression was used to relate the depth of penetrability obtained by both protocols, the estimated or non-destructive protocol and the actual or destructive protocol, showing a high relationship (R2 > 0.8 and RPD>2.5) in the range 610–1050 nm. This confirms that this non-destructive approach proposed for estimating the light penetration depth of a Vis-NIR HSI system in persimmon fruit is accurate, so it could be used as a valuable method to evaluate other HSI systems for different fruits.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Epitaxy of SrTiO3 on Silicon: The Knitting Machine Strategy

  • Saint-Girons, Guillaume
  • Gázquez, Jaume
  • Grenet, Geneviève
Saint-Girons, Guillaume et al., SrTiO3 (STO) crystalline layers grown on Si open unique perspectives for the monolithic integration of functional oxides in silicon-based devices, but their fabrication by molecular beam epitaxy (MBE) is challenging due to unwanted interfacial reactions. Here we show that the formation of single-crystal STO layers on Si by MBE at the moderate growth temperature imposed by these interface reactions results from the crystallization of a partially separated amorphous mixture of SrO and TiO2 activated by an excess of Sr. We identify the atomic pathway of this mechanism and show that it leads to an antiphase domain morphology. On the basis of these results, we suggest and test alternative STO growth strategies to avoid antiphase boundary formation and significantly improve the STO structural quality. The understanding provided by these results offers promising prospects to crystallize perovskite oxides on semiconductors at moderate temperature and circumvent the issue of parasitic interface reactions., This work was partly supported by the European projects SITOGA (STREP FP7, grant number 619456) and TIPS (ICT H2020, grant number 107347) as well as by the French ANR programs HIRIS and DIAMWAFEL., Peer reviewed