Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Processing Compostable PLA/Organoclay Bionanocomposite Foams by Supercritical CO2 Foaming for Sustainable Food Packaging

  • Faba, Simón
  • Arrieta, Marina P.
  • Agüero, Ángel
  • Torres, Alejandra
  • Romero, Julio
  • Rojas, Adrián
  • Galotto, María José
[EN] This article proposes a foaming method using supercritical carbon dioxide (scCO(2)) to obtain compostable bionanocomposite foams based on PLA and organoclay (C30B) where this bionanocomposite was fabricated by a previous hot melt extrusion step. Neat PLA films and PLA/C30B films (1, 2, and 3 wt.%) were obtained by using a melt extrusion process followed by a film forming process obtaining films with thicknesses between 500 and 600 mu m. Films were further processed into foams in a high-pressure cell with scCO(2) under constant conditions of pressure (25 MPa) and temperature (130 degrees C) for 30 min. Bionanocomposite PLA foams evidenced a closed cell and uniform cell structure; however, neat PLA presented a poor cell structure and thick cell walls. The thermal stability was significantly enhanced in the bionanocomposite foam samples by the good dispersion of nanoclays due to scCO(2), as demonstrated by X-ray diffraction analysis. The bionanocomposite foams showed improved overall mechanical performance due to well-dispersed nanoclays promoting increased interfacial adhesion with the polymeric matrix. The water uptake behavior of bionanocomposite foams showed that they practically did not absorb water during the first week of immersion in water. Finally, PLA foams were disintegrated under standard composting conditions at higher rates than PLA films, showing their sustainable character. Thus, PLA bionanocomposite foams obtained by batch supercritical foaming seem to be a sustainable option to replace non-biodegradable expanded polystyrene, and they represent a promising alternative to be considered in applications such as food packaging and other products., This research was funded by the National Commission for Scientific and Technological Research (ANID) through the Project Fondecyt Regular 12011301 and by the Spanish Ministry of Science and Innovation (MICINN) through the PID-AEI project (grant number PID2021-123753NAC32) funded by MCIN/AEI/10.13039/501100011033 and by ERDF "A way of making Europe" by the "European Union". Ph.D. student Simon Faba gratefully acknowledges ANID for its financial support from the National Doctoral Scholarship with the grant number 21200851 as well as with the research mobility fellow (number 75210123). Ph.D. Angel Aguero acknowledges the Margarita Salas postdoctoral grant from the Ministerio de Universidades, Spain, funded by the European Union-Next Generation EU.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Biodegradable nanocomposite poly(lacticacid) foams containing carvacrol-based cocrystal prepared by supercritical CO2 processing for controlled release in active food packaging

  • Faba, Simón
  • Arrieta, Marina P.
  • Romero, Julio
  • Agüero, Ángel
  • Torres, Alejandra
  • Martínez, Sara
  • Galotto, María José
  • E. Rayón|||0000-0002-0653-2046
[EN] Compounds derived from essential oils have been used in active packaging, but their volatility and degradability negatively affect stability and leads to high release rates. The present study aimed to develop PLA bionanocomposite foams loaded with carvacrol cocrystal by supercritical CO2 and its release into a food simulant for control release in food packaging. For this purpose, 4,4'-bipyridine was used as coformer and carvacrol as active agent. Cocrystallized closed cell foams were obtained using supercritical CO2 and were characterized in terms of their physicochemical and mechanical properties, and release kinetics to a D1 simulant were evaluated as well as the antioxidant ability. A better overall mechanical behavior due to the nanoclay promoting a higher interfacial adhesion with the polymeric matrix was revealed. A higher incorporation of carvacrol was observed in samples with higher C30B content. The incorporated cocrystals showed a decrease of one order of magnitude in the estimated effective diffusion coefficient of carvacrol and showed antioxidant activity. These results suggest that the nanocomposite foam containing carvacrolbased cocrystals could be used in active packaging systems with controlled release characteristics, especially with highly volatile compounds, and can be proposed for other fields such as biomedical applications., This work has been developed in the framework of the project FONDECYT (grant number 12011301), Ph.D. Simon Faba is gratefully acknowledged to the National Commission for Scientific and Technological Research, ANID, for its financial support from the National Doctoral Scholarship (grant number 21200851) . Authors thank the financial support of CEDENNA (AFB 220001 Project) and the Spanish Ministry of Science and Innovation (MICINN) through the PID-AEI project (grant PID2021-123753NA-C32) funded by MCIN/AEI/10.13039/501100011033 and by ERDF "A way of making Europe" by the "European Union". Moreover, authors thank the staff of the Laboratory of Membrane Separation Processes (LabProSeM) , USACH, Santiago (Chile) for their assistance with equipment and CO2 supercritical system. Ph.D. Angel Agueero acknowledges the Margarita Salas post-doctoral grant from the Ministerio de Universidades, Spain, funded by the European Union-Next Generation EU. Marina P. Arrieta thanks "Consolidacion Investigadora" project (grant CNS2022-136064) funded by MCIN/AEI/10.13039/501100011033 and by the "European Union NextGenerationEU/PRTR".