Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

Helvia. Repositorio Institucional de la Universidad de Córdoba
Publicación Artículo científico (JournalArticle)

Identification and simulation of atmospheric dispersion patterns of odour and VOCs generated by a waste treatment plant

  • Gutiérrez, M.C.
  • Hernández-Ceballos, Miguel Ángel
  • Márquez, P.
  • Chica Pérez, Arturo F.
  • Martín, M.A.
The impact of odorous gases emitted from waste treatment plants (WTP) has been a major concern of communities living near these facilities. This paper describes the methodology used to estimate the dispersion of odorous and volatile organic compound (VOC) emissions from a WTP situated in Vacarisses (Barcelona). The steps are as follows: (1) collection of gaseous samples at the WTP chimney outlet to the atmosphere; (2) olfactometric and chemical characterization of gaseous samples; (3) identification of the main atmospheric dispersion patterns using air mass trajectories and (4) modelling of the WTP emissions using a dispersion model. The impact on nearby populations such as Tarrasa, Esparraguera, Martorell, Castellar del Vall´es and Manresa (Catalonia, Spain) was evaluated. The mean removal efficiency of the WTP biofilter was 37.0 ± 5.0%. Therefore, the remaining 63.0 ± 5.0% accounted for emissions into the atmosphere for average odorous (1,700,000 ouE/s) and VOC emissions (1,476,500 μg/s). VOCs were classified into 19 chemical families, of which terpenes, ketones, alcohols and aliphatic hydrocarbons were the most abundant, with concentrations ranging from 4000 to 8000 μg/m3. The air mass trajectory analysis identified six airflow patterns from the WTP with a clear seasonal distribution. The simulation of the dispersion revealed that Tarrasa (to the southeast) was the most affected community, with odorous and VOC impacts of approximately 4.0 ou/m3 and 3.5 μg/m3 (in summer, wind speed = 1.51 m/s). Although these values are not relevant for the safety and well-being of humans, they do deteriorate air quality.
Helvia. Repositorio Institucional de la Universidad de Córdoba
Publicación Artículo científico (JournalArticle)

A Review on the Applications of Coffee Waste Derived from Primary Processing: Strategies for Revalorization

  • Serna-Jiménez, Johanna
  • Siles López, José Ángel
  • Martín, M.A.
  • Chica Pérez, Arturo F.
Coffee is an extremely popular beverage worldwide. To obtain it, the berry must be depulped, fermented, washed, dried, and roasted, producing residues: pulp and husk, mucilage, and parchment. Recently there has been an interest in generating high-value products. In this article, advances in the valorization process are critically reviewed, including an overview of the composition of residues derived from primary processing, uses in food, biocomposite, and biofuel production (thermochemical conversion). With an increasing production of coffee projected in the coming years, there is an urgent need to balance it with the appropriate use and industrial application of coffee wastes and by-products, which are renewable resources rich in carbohydrates, proteins, pectin, and bioactive compounds (polyphenols). The applications described above, together with those that will undoubtedly be developed in the future, represent promising opportunities to take advantage of agro-industrial residues derived from primary processing of Coffea spp. and develop more efficient and sustainable systems through biorefinery approaches and the circular economy.
Helvia. Repositorio Institucional de la Universidad de Córdoba
Publicación Artículo científico (JournalArticle)

Impact of D‑Limonene in the technical and economic feasibility of the anaerobic digestion applied in biorefineries

  • Gutiérrez, M.C.
  • Serrano, A.
  • Alonso-Fariñas, B.
  • Siles López, José Ángel
  • Martín Santos, María Ángeles
This study evaluates the impact of D-Limonene on the anaerobic digestion (AD) in terms of stability, methane yield and process kinetics, with a focus on the economic viability of a biorefinery based on D-Limonene extraction using steam explosion from orange peel waste (OPW) followed by AD. The experiments were carried out at laboratory scale using mesophilic (35 ± 1 °C) completely stirred tank reactors that operated in semicontinuous mode. As a result, reduction in methane production of 57% and a marked variation in biogas composition were observed with the addition of D-Limonene. Although the process was stable in terms of pH and alkalinity, the accumulation of nondegraded acidic organic matter was directly related to the decrease of the microbial concentration in the reactors. The process kinetics was also affected, with a reduction in the apparent kinetic constant K′ from 0.6 d− 1 to 0.1 d− 1. The digestion carried out on the free-D-Limonene orange peel waste (FL-OPW) (with 70% of D-Limonene removed) increased the methane coefficient by 27% with a value of 232 mL CH4/ g volatile solids (VS). According to the economic evaluation, the proposed biorefinery system would be profitable for methane yield coefficient values higher than 223 mL CH4/ g VS. Therefore, the extraction of D-Limonene, which has a wide range of applications in different industrial sectors, might be suitable to avoid the microbial inhibition and diminish of the methane production, ensuring the profitability of the valorisation system within the frame of circular economy.
Helvia. Repositorio Institucional de la Universidad de Córdoba
Publicación Capítulo o parte de un libro (BookPart)

Use of Omics Techniques for Assessing Water Quality: Omics to Evaluate Water Quality

  • Alhama, José
  • Barbudo Lunar, Marina
  • Michán, Carmen
Embargado hasta 02/01/2027, Assessing chemical pollution in water environments is crucial to prevent or even reverse its negative effects on ecosystems, including the health of humans and other living beings. Chemical analysis of pollutants needs previous knowledge of the contaminating menaces and does not provide information on their biological effects. Thus, they are not useful for the detection of emerging pollutants or for evaluating the effects of compounds that do not present a monotonic dose-effect relationship. As an alternative, the presence, absence, or changes in the abundance of sentinel organisms (bioindicators) can be used to detect water pollution. Furthermore, biological parameters (biomarkers) evaluated in these organisms at their biochemical, histological, immunological, physiological, or organismic levels are routinely used to detect and assess the negative effect of pollutants. Many of these parameters are related to oxidative stress, as pollutants commonly exert their toxicity and produce pathogenic damages by increasing the levels of reactive oxidative species. However, the number of biomarkers is limited, and their use requires prior knowledge of their mechanism of action, making them inefficient for the evaluation of new or unknown chemicals. Omics allow us to analyse all the biomolecules from a certain sample, what makes them ideal approaches for assessing pollution in an unbiased manner. They can be used to analyse DNA (genomics), mRNA (transcriptomics), proteins (proteomics), or metabolites (metabolomics). Moreover, they can also be utilised to study biomolecules with a spatial perspective (mass spectrometry imaging, MSI) to relate changes with morphological or physiological alterations in multicellular organisms. At the micro-scale, microbes are pivotal for the health of all different types of aquatic ecosystems (i.e. marine, lakes, rivers, wetlands, estuaries, and ponds) and are present even in the most extreme conditions. Analysing microbial alterations using metaomic techniques, mainly based on the taxonomic resolution by rDNA amplicon sequencing, which informs about the composition, structure, and diversity of the microbiome, is to date the most promising method to assess the health status of aquatic environments. Nevertheless, methodological improvements are needed to assure efficient and specific extraction/isolation protocols, and complete reference databases are also imperative for precise bacterial identification. Alterations in the functional capacity of the microbiome in response to pollution can easily be inferred using bioinformatic tools as FAPROTAX or Tax4Fun. This approach has proven to be particularly useful for wastewater-based epidemiology to identify health menaces in aquatic environments. Bacterial community biotic indexes (e.g. microgAMBI) can also be calculated to assess the ecological status of water bodies. In summary, metaomics are proving to be powerful tools for assessing the health of aquatic environments, also providing key information for the effective implementation of corrective bioremediation strategies. Moreover, the increasing development of artificial intelligence tools promises to generate ever more complete databases, faster and more precise identifications, and more accurate biological indexes to evaluate environmental alterations.