Pasar al contenido principal

INTEGRACION DEL IOT EN LA OPTIMIZACION DE LA RECOGIDA URBANA DE RESIDUOS BASADA EN EL IMPACTO OLOROSO

PID2020-117438RB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE CORDOBA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

Helvia. Repositorio Institucional de la Universidad de Córdoba
Publicación Artículo científico (JournalArticle)

Odour impact simulation of a large urban wastewater treatment plant through the numerical solution of a Eulerian model

  • Márquez, Pedro
  • Muñoz Serrano, Encarnación
  • Siles López, José Ángel
  • Martín Santos, María Ángeles
  • Gutiérrez Martín, María del Carmen
This study aims to develop a solver to calculate the dispersion of emitted odour from the main sources located in a large urban wastewater treatment plant (WWTP). Its seasonal odour impact on surrounding areas, including nearby populations, was also evaluated. Different seasons of the year were studied using the prevailing meteorological conditions in each case, within the framework of a Eulerian model. Dynamic olfactometry was used to measure the odour concentration (OC) of the main emission sources of the WWTP, with such data being input parameters of the model. The calculations were carried out by a robust and precise fully-implicit-temporal-discretisation scheme and an exponential spatial scheme (in the control volume formulation), which was solved using the Modified Strongly Implicit (MSI) method. A code in the programming language Fortran90 was developed to calculate the odour immission concentration (OIC). Odour emissions from the WWTP were found to derive mainly from the wastewater line, which contributed with 98.86% of the total emission of the facility, with odour emission rates (OERs) as high as 62,100 ouE/s, 55,800 ouE/s, 88,400 ouE/s and 11,300 ouE/s in the pre-treatment header, sand and fat removal, primary settling and biological treatment, respectively. Such values corresponded to summer, which is the season that registered the most intense emissions. The first two odour sources and the units for gravity thickening, flotation thickening and sludge dehydration consisted of odour treatment systems based on adsorption by granular activated carbon (GAC). Gravity thickening achieved the highest OER value (1500 ouE/s) in the sludge line, but this only contributed with 1.14% to the total emission of the WWTP. Similar OER values were observed in other seasons of the year, although somewhat lower. The highest odour impact (538 ou/m3) was predicted in the south direction in autumn, which corresponded to the lowest wind speed in the main direction (1.23 m/s).
Helvia. Repositorio Institucional de la Universidad de Córdoba
Publicación Artículo científico (JournalArticle)

A renaissance for lithium-sulfur batteries through low-cost, efficient, and sustainable biomass cathodes

  • Benítez, Almudena
  • Brandell, Daniel
Although lithium-ion batteries face material sustainability issues, one promising alternative—lithium-sulfur (Li-S) batteries—suffers from destructive chemical reactions. Recently in Chem, Hou et al. proposed one viable solution: an encapsulating lithium polysulfide electrolyte. We discuss this advance and the potential role of biomass as an alternative sustainable material for Li-S battery cathodes.
Helvia. Repositorio Institucional de la Universidad de Córdoba
Publicación Artículo científico (JournalArticle)

Identification and simulation of atmospheric dispersion patterns of odour and VOCs generated by a waste treatment plant

  • Gutiérrez, M.C.
  • Hernández-Ceballos, Miguel Ángel
  • Márquez, P.
  • Chica Pérez, Arturo F.
  • Martín, M.A.
The impact of odorous gases emitted from waste treatment plants (WTP) has been a major concern of communities living near these facilities. This paper describes the methodology used to estimate the dispersion of odorous and volatile organic compound (VOC) emissions from a WTP situated in Vacarisses (Barcelona). The steps are as follows: (1) collection of gaseous samples at the WTP chimney outlet to the atmosphere; (2) olfactometric and chemical characterization of gaseous samples; (3) identification of the main atmospheric dispersion patterns using air mass trajectories and (4) modelling of the WTP emissions using a dispersion model. The impact on nearby populations such as Tarrasa, Esparraguera, Martorell, Castellar del Vall´es and Manresa (Catalonia, Spain) was evaluated. The mean removal efficiency of the WTP biofilter was 37.0 ± 5.0%. Therefore, the remaining 63.0 ± 5.0% accounted for emissions into the atmosphere for average odorous (1,700,000 ouE/s) and VOC emissions (1,476,500 μg/s). VOCs were classified into 19 chemical families, of which terpenes, ketones, alcohols and aliphatic hydrocarbons were the most abundant, with concentrations ranging from 4000 to 8000 μg/m3. The air mass trajectory analysis identified six airflow patterns from the WTP with a clear seasonal distribution. The simulation of the dispersion revealed that Tarrasa (to the southeast) was the most affected community, with odorous and VOC impacts of approximately 4.0 ou/m3 and 3.5 μg/m3 (in summer, wind speed = 1.51 m/s). Although these values are not relevant for the safety and well-being of humans, they do deteriorate air quality.
Helvia. Repositorio Institucional de la Universidad de Córdoba
Publicación Artículo científico (JournalArticle)

A Review on the Applications of Coffee Waste Derived from Primary Processing: Strategies for Revalorization

  • Serna-Jiménez, Johanna
  • Siles López, José Ángel
  • Martín, M.A.
  • Chica Pérez, Arturo F.
Coffee is an extremely popular beverage worldwide. To obtain it, the berry must be depulped, fermented, washed, dried, and roasted, producing residues: pulp and husk, mucilage, and parchment. Recently there has been an interest in generating high-value products. In this article, advances in the valorization process are critically reviewed, including an overview of the composition of residues derived from primary processing, uses in food, biocomposite, and biofuel production (thermochemical conversion). With an increasing production of coffee projected in the coming years, there is an urgent need to balance it with the appropriate use and industrial application of coffee wastes and by-products, which are renewable resources rich in carbohydrates, proteins, pectin, and bioactive compounds (polyphenols). The applications described above, together with those that will undoubtedly be developed in the future, represent promising opportunities to take advantage of agro-industrial residues derived from primary processing of Coffea spp. and develop more efficient and sustainable systems through biorefinery approaches and the circular economy.
Helvia. Repositorio Institucional de la Universidad de Córdoba
Publicación Artículo científico (JournalArticle)

Impact of D‑Limonene in the technical and economic feasibility of the anaerobic digestion applied in biorefineries

  • Gutiérrez, M.C.
  • Serrano, A.
  • Alonso-Fariñas, B.
  • Siles López, José Ángel
  • Martín Santos, María Ángeles
This study evaluates the impact of D-Limonene on the anaerobic digestion (AD) in terms of stability, methane yield and process kinetics, with a focus on the economic viability of a biorefinery based on D-Limonene extraction using steam explosion from orange peel waste (OPW) followed by AD. The experiments were carried out at laboratory scale using mesophilic (35 ± 1 °C) completely stirred tank reactors that operated in semicontinuous mode. As a result, reduction in methane production of 57% and a marked variation in biogas composition were observed with the addition of D-Limonene. Although the process was stable in terms of pH and alkalinity, the accumulation of nondegraded acidic organic matter was directly related to the decrease of the microbial concentration in the reactors. The process kinetics was also affected, with a reduction in the apparent kinetic constant K′ from 0.6 d− 1 to 0.1 d− 1. The digestion carried out on the free-D-Limonene orange peel waste (FL-OPW) (with 70% of D-Limonene removed) increased the methane coefficient by 27% with a value of 232 mL CH4/ g volatile solids (VS). According to the economic evaluation, the proposed biorefinery system would be profitable for methane yield coefficient values higher than 223 mL CH4/ g VS. Therefore, the extraction of D-Limonene, which has a wide range of applications in different industrial sectors, might be suitable to avoid the microbial inhibition and diminish of the methane production, ensuring the profitability of the valorisation system within the frame of circular economy.
Helvia. Repositorio Institucional de la Universidad de Córdoba
Publicación Artículo científico (JournalArticle)

Odor emission assessment of different WWTPs with Extended Aeration Activated Sludge and Rotating Biological Contactor technologies in the province of Cordoba (Spain)

  • Ruiz Muñoz, Alberto
  • Siles López, José Ángel
  • Márquez, P.
  • Toledo Padrón, Manuel
  • Gutiérrez, M.C.
  • Martín, M.A.
In this study, five urban WWTPs (Wastewater Treatment Plant) with different biological treatment (Extended Aeration Activated Sludge – EAAS; Rotating Biological Contactor – RBC), wastewater type (Urban; Industrial) and size, were jointly evaluated. The aim was twofold: (1) to analyze and compare their odor emissions, and (2) to identify the main causes of its generation from the relationships between physico-chemical, respirometric and olfactometric variables. The results showed that facilities with EAAS technology were more efficient than RBC, with elimination yields of organic matter higher than 90%. In olfactometric terms, sludge managements facilities (SMFs) were found to be the critical odor source in all WWTPs compared to the Inlet point (I) or Post primary treatment (PP), and for seasonal periods with ambient temperature higher than 25 ◦C. Moreover, the global odor emissions quantified in all SMFs revealed that facilities with EAAS (C-WWTP, V-WWTP and Z-WWTP) had a lower odor contribution (19,345, 14,800 and 11,029 ouE/s⋅m2, respectively) than for those with RBC technology (P-WWTP and NC-WWTP) which accounted for 19,747 ouE/s⋅m2 and 80,061 ouE/s⋅m2, respectively. In addition, chemometric analysis helped to find groupings and differences between the WWTPs considering the wastewater (71.27% of total variance explained) and sludge management (64.52% of total variance explained) lines independently. Finally, odor emissions were adequately predicted from the physico-chemical and respirometric variables in the wastewater (r2 = 0.8738) and sludge (r2 = 0.9373) lines, being pH, volatile acidity and temperature (wastewater line), and pH, moisture, temperature, SOUR (Specific Oxygen Uptake Rate) and OD20 (Cumulative Oxygen Demand at 20 h) (sludge line) the most influential variables.
Helvia. Repositorio Institucional de la Universidad de Córdoba
Publicación Capítulo o parte de un libro (BookPart)

Composting: an alternative with marked potential for organic waste management

  • Gutiérrez, M.C.
  • Márquez García, P.
  • Siles López, José Ángel
  • Martín Santos, María Ángeles
  • Chica Pérez, Arturo F.
Composting is one of the most used technologies for biowaste valorisation due the low cost and simplicity of the process. However, its implementation has been ineffective in most of developing countries because the limited research and resources available. Therefore, there is a need for more sustainable waste management strategies involving policy makers, industry, private sector services and local communities. Recent literature reports the progress in research on biowaste composting specially in large cities, which mainly focuses on: (1) physico-chemical analysis of abundant residual substrates such as agro-industrial, urban solid waste or green pruning, (2) assessment of alternatives to improve the process and the product quality, (3) technological improvement of the valorisation facilities, and (4) implementation of product quality standards. The progress on such research field might be considered markedly promising for positioning composting as a suitable alternative to manage biowaste in developing countries.
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Comprehensive characterization of gelatin-pullulan blend films incorporated with bacteriophages: assessing physicochemical, mechanical, optical, thermal, and antimicrobial properties

  • Entezari, Asma
  • Costa, Jean Carlos Correia Peres
  • Morcillo-Martín, Ramón
  • Rincón, Esther
  • Espinosa, Eduardo
  • Sedaghat, Nasser
  • Shakeri, Golshan
  • Rodríguez, Alejandro
  • Pérez-Rodríguez, Fernando
The use of bacteriophages in foods as a bioprotective strategy to control harmful pathogens has gained increasing interest over the last few years. Among the possible application methods, integrating bacteriophages into packaging materials is preferred because it can improve bacteriophage stability and increase efficacy against the target microorganisms. This study aims at assessing the effect and performance of incorporating a lytic bacteriophage cocktail, targeted against Salmonella spp., into co-polymer films made up of gelatin (GEL) and pullulan (PUL) in various proportions (GEL:PUL; 100:0, 80:20, 60:40, 40:60, 20:80, and 0:100). Results indicated that the incorporation of bacteriophages did not disrupt the material structure, and mechanical properties such as tensile strength and Youngʼs modulus of the GEL:PUL blended films were preserved. In the case of the elongation at break, it improved when bacteriophages were formulated (80%). Moreover, the presence of bacteriophages in the polymeric matrices resulted in almost total UV-light blocking capacity (> 99%). The stability of bacteriophages, incorporated into the film, and their antimicrobial effect remained in all films for 5 weeks, producing Salmonella reductions higher than 2 log cfu/mL for GEL40:PUL60 and GEL20:PUL80 films. Bacteriophage release from the films into aqueous media at 4 °C was lower than at 25 °C. Moreover, the combination of suitable proportions of GEL and PUL (e.g., 40:60, 20:80) resulted in a high and stable release capacity over time. Overall, findings in this study demonstrate that integrating bacteriophages into suitable packaging materials can result in stable and effective antimicrobial packaging systems, able to exert activity over prolonged periods during food storage., This work was supported by the BiofreshCloud project, with reference PRIMA-S2-2019-PCI2020-112015, which is part of the PRIMA programme supported by the European Union and funded by MCIN/AEI/10.13039/501100011033 and European Union “NextGenerationEU/PRTR,” as well as by the AgroVal4PackFood project, with reference PID2020-117438RB-I00, supported by the Ministerio de Ciencia e Innovación (Government of Spain).
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Comprehensive characterization of gelatin-pullulan blend films incorporated with bacteriophages: assessing physicochemical, mechanical, optical, thermal, and antimicrobial properties

  • Entezari, Asma
  • Costa, Jean Carlos Correia Peres
  • Morcillo-Martín, Ramón
  • Rincón, Esther
  • Espinosa, Eduardo
  • Sedaghat, Nasser
  • Shakeri, Golshan
  • Rodríguez, Alejandro
  • Pérez-Rodríguez, Fernando
The use of bacteriophages in foods as a bioprotective strategy to control harmful pathogens has gained increasing interest over the last few years. Among the possible application methods, integrating bacteriophages into packaging materials is preferred because it can improve bacteriophage stability and increase efficacy against the target microorganisms. This study aims at assessing the effect and performance of incorporating a lytic bacteriophage cocktail, targeted against Salmonella spp., into co-polymer films made up of gelatin (GEL) and pullulan (PUL) in various proportions (GEL:PUL; 100:0, 80:20, 60:40, 40:60, 20:80, and 0:100). Results indicated that the incorporation of bacteriophages did not disrupt the material structure, and mechanical properties such as tensile strength and Youngʼs modulus of the GEL:PUL blended films were preserved. In the case of the elongation at break, it improved when bacteriophages were formulated (80%). Moreover, the presence of bacteriophages in the polymeric matrices resulted in almost total UV-light blocking capacity (> 99%). The stability of bacteriophages, incorporated into the film, and their antimicrobial effect remained in all films for 5 weeks, producing Salmonella reductions higher than 2 log cfu/mL for GEL40:PUL60 and GEL20:PUL80 films. Bacteriophage release from the films into aqueous media at 4 °C was lower than at 25 °C. Moreover, the combination of suitable proportions of GEL and PUL (e.g., 40:60, 20:80) resulted in a high and stable release capacity over time. Overall, findings in this study demonstrate that integrating bacteriophages into suitable packaging materials can result in stable and effective antimicrobial packaging systems, able to exert activity over prolonged periods during food storage., This work was supported by the BiofreshCloud project, with reference PRIMA-S2-2019-PCI2020-112015, which is part of the PRIMA programme supported by the European Union and funded by MCIN/AEI/10.13039/501100011033 and European Union “NextGenerationEU/PRTR,” as well as by the AgroVal4PackFood project, with reference PID2020-117438RB-I00, supported by the Ministerio de Ciencia e Innovación (Government of Spain).