Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Potential Key Factors, Policies, and Barriers for Rooftop Agriculture in EU Cities, Barcelona, Berlin, Bologna, and Paris

  • Zambrano Prado, Perla|||0000-0001-5911-3585
  • Orsini, Francesco|||0000-0001-6956-7054
  • Rieradevall, Joan|||0000-0003-3360-6829
  • Josa Garcia-Tornel, Alejandro|||0000-0003-1180-7910
  • Gabarrell Durany, Xavier|||0000-0003-1730-4337
The main objective of this study is to contribute a framework and to provide an overview of potential key factors, policies, and barriers associated with the integration of rooftop urban agriculture (RUA), building on stakeholders' perspectives in four European cities (Barcelona, Berlin, Bologna, and Paris). The research was developed in two phases, namely, a workshop and a survey of stakeholders involved in RUA from the four cities. Education, environmental, research, technological innovation, food production, and social factors play an important role in implementing RUA. Productive spaces, cultural values, social cohesion, social rural-urban links, and the high cost of urban land are highlighted as factors that "promote" RUA. In contrast, the cost of water and pollution are major contextual factors that constrain RUA. Policies related to food trade and urban planning are those that most limit RUA development. Major architectural and technical barriers related to the limits on building heights, historical buildings, a lack of specific building codes, building design and roof accessibility were identified. The high cost of infrastructure and policies that prohibit RUA product sales emerged as economic constraints. Major differences among the cities studied included the perceived effect of urban policies on RUA diffusion as well as the perceived relevance of economic and pollution factors. This study revealed that extensive dissemination and the development of appropriate information about RUA are needed. The creation of new regulations, as well as modifications to urban and building codes to support RUA, is also envisaged. This approach will consider a more flexible land-use policy that allows agriculture to take place in cities as well as marketing frameworks for RUA products. For future studies, it would be useful to apply the framework developed in this study to a larger sample. A study is also needed to confirm hypothetical differences between cities.
Dipòsit Digital de Documents de la UAB
Publicación Artículo de revisión (ReviewArticle)

Measuring the social impact of City-region food system initiatives (CRFSIs), A systematic review of indicators and metrics

  • Specht, K.
  • Iodice, Chiara|||0000-0003-2116-1930
  • Monticone, F.
  • Tonini, Pietro|||0000-0003-3113-619X
  • Petruzzelli, Mara|||0009-0000-3156-3322
  • Carotti, L.
  • Fox-Kämper, R.
  • Toboso-Chavero, Susana|||0000-0001-8475-5184
  • Orsini, Francesco|||0000-0001-6956-7054
  • Samoggia, A.
  • Vittuari, M.
City-region food system initiatives (CRFSIs) are crucial for sustainable urban development, as they bridge the gap between local producers and consumers, adapt and restructure city-regions, and improve urban food security. Although in political and scientific discourses, CRFSIs are generally associated with positive effects across all sustainability dimensions, research has begun to measure their actual impact. While many studies address their environmental and economic impacts, it is widely argued that social impacts are 'fuzzier' and more difficult to measure. This paper challenges the notion that social impacts are immeasurable by presenting social indicators and metrics in four social dimensions (education, health, community development and economy). For this purpose, a systematic literature review covering the period 2010-2020 was conducted via the PRISMA method. The analysis of n = 234 papers confirmed that social impacts are measurable through various indicators, including quantitative metrics (e.g., kg, €) and qualitative measures (e.g., Likert scales). Health-related indicators were present in 47 % of all analyzed papers. Across the 597 identified indicators, 249 indicators were health-related, followed by indicators related to education (151), economic aspects (105), and community development (92). This review highlights the strong correlations between these different social impact dimensions. It serves as a valuable resource for quantifying social impacts and enabling researchers to assess social sustainability of CRFSIs in the future.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Identifying potential applications for residual biomass from urban agriculture through eco-ideation, tomato stems from rooftop greenhouses

  • Manríquez-Altamirano, Ana
  • Sierra-Pérez, Jorge|||0000-0002-7660-3508
  • Muñoz Odina, Pere|||0000-0002-2931-6311
  • Gabarrell Durany, Xavier|||0000-0003-1730-4337
Considering that urban agriculture (UA) is currently on the rise due to its multiple benefits in addition to environmental ones, it would also be necessary to foresee the flow of solid waste it generates, which if not properly managed or used, could become a new waste problem within the cities. The main objective of this study is to take advantage of agro-urban solid waste (AUSW) from the perspective of Circular economy (CE) in order to, in addition to reducing the volume of AUSW within cities, to close the life cycle of UA allowing to continue with its multiple benefits. Starting from a previous study on the classification and quantification of the AUSW generated in rooftop greenhouse (RTG) tomato crop, where it was determined that the waste with the greatest potential for use was tomato stems, in this study a methodology is proposed that part of the eco-design to take advantage of the tomato stems adding value (upcycling) through the approach of "do-it-yourself" (DIY) for local use. First, the physical, chemical and mechanical characterization of the tomato stems was carried out and the materials with similar properties were identified using Ashby graphs., Afterwards, a creative session was held where specialists in order to identify possible applications of the stems through group techniques for the generation of ideas and the evaluation of concepts. Finally, tests were carried out with the material and a semi-quantitative evaluation of the resulting concepts was carried out using an eco-design metric. The resulting concepts were "Fences and trellises", "Packaging" and "Boards, panels and blocks". In addition to the results obtained on the possible applications of the stems in situ, this study provides data on the characterization of the stems of tomato plants that could also be used for the use of biomass in other contexts and scales such as conventional agriculture.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Analysis of urban agriculture solid waste in the frame of circular economy, case study of tomato crop in integrated rooftop greenhouse

  • Manríquez-Altamirano, Ana
  • Sierra-Pérez, Jorge|||0000-0002-7660-3508
  • Muñoz Odina, Pere|||0000-0002-2931-6311
  • Gabarrell Durany, Xavier|||0000-0003-1730-4337
Within urban agriculture (UA), integrated rooftop greenhouses (i-RTG) have great growth potential as they offer multiple benefits. Currently it is intended to improve environmental benefits by taking advantage of the water, nutrients and gases flows. On the other hand, solid waste (SW) generated by the UA is a new type of waste within cities that has not well been classified or quantified for its use. This could become a new problem for the waste management system within cities in the future, mainly the organic fraction. The objective of this research is to identify what type of i-RTG SW has the potential to be used from a circular economy (CE) perspective and propose a type of management for its material valorization. The results of the case study show that, of the SW generated in i-RTG, the biomass has the greatest potential to be used locally as an eco-material, particularly the tomato stems. Its use is proposed as a substrate for two experimental lettuce crops in i-RTG. The results show that tomato stems have a better yield as a substrate after a prewash treatment, since at first the values of electrical conductivity (EC) are very high with respect to the control substrate, which is expanded perlite. In conclusion, we can say that it is possible to increase the environmental benefits of i-RTG by taking advantage of its biomass locally, helping to foresee a possible future problem regarding the management of the residual biomass of i-RTG within cities. In this way, the paradigm about the perception of the SW of the UA could be changed to give them a by-product treatment from the beginning.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Investigating a repair workshop, the reuse of washing machines in Barcelona

  • Talens Peiró, Laura|||0000-0002-1131-1838
  • Garcia Fernandez, Beatriz
  • Gabarrell Durany, Xavier|||0000-0003-1730-4337
The reuse and repair of products are often good strategies from a holistic resource conservation perspective. Many organizations active in reuse concentrate in cities where a greater share of wasted electrical and electronic equipment is generated. The number of companies active in the reuse of these products is still limited, and information about the procedures and, more importantly, about the equipment effectively reused is not publicly available yet in many cases. This leads to imprecise knowledge about reuse in these organizations and unreliable data about the progress to a circular economy in cities and regions. The release of new standards on material efficiency represents a big step towards the harmonization of methods and indicators to monitor reuse and repair of products, but its use is challenging for existing workshops. This study examines the reuse of washing machines (WMs) at a local workshop with the objective of understanding the internal procedures for repair and reuse and defining indicators suitable to monitor these activities. The assessment at the company level shows that in 2018, approximately 77% of the WMs collected were recycled, 10% were repaired (80% of these needed multiple parts) and 2% were refurbished. At the product level, the proportion of reused components varies greatly from 4% to 14% when calculated by number on products to 60% when considering number balance. An economic analysis shows that using spare parts from wasted WMs increases the economic benefits up to 3-fold. In conclusion, the indicators proposed are useful to understand the performance of these workshops and potentially useful to quantify reuse at the city and regional scales.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Prospects on end of life electric vehicle batteries through 2050 in Catalonia

  • Sanclemente Crespo, Mateo|||0000-0003-0778-0946
  • Van Ginkel González, Marta
  • Talens Peiró, Laura|||0000-0002-1131-1838
As electric mobility gains prominence, the demand for electric vehicle batteries is rapidly rising. Although the amount of these batteries reaching their end of life is presently negligible, studies to quantify their flows and stocks will progressively gain importance as they have a high potential for reuse and contain some economic valuable materials. This study aims at forecasting the number of batteries due to be collected yearly from 2020 to 2050 in Catalonia (Northeast Spain). Product flow analyses are developed considering two different future electric vehicle sales, and two lifespan scenarios for batteries, assuming they follow a Weibull lifetime probability distribution. The volume of batteries reaching their first-use end of life will not reach significance until 2050, however strategies to optimise their use can be placed earlier to get prepared to the coming influxes. If future electric vehicle sales are to meet the Spanish Climate Change Law, influxes of batteries can increase up to 25-fold in 2030 and 72-fold in 2040. Under the extended battery service scenarios, the storage capacity is estimated to be 4 to 5 times larger than in scenarios where batteries are recycled earlier. The potential supply of secondary materials from end of life batteries will increase up to 80% of cobalt, copper and nickel, and 60% of lithium in 2050. The results urge to place proper management strategies for batteries in the coming years to help optimising their use and their potential recovery.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Environmental assessment of a new building envelope material derived from urban agriculture wastes, the case of the tomato plants stems

  • Llorach-Massana, Pere|||0000-0003-1162-8162
  • Cirrincione, Laura
  • Sierra-Pérez, Jorge|||0000-0002-7660-3508
  • Scaccianoce, Gianluca|||0000-0003-2193-8949
  • La Gennusa, Maria|||0000-0001-6450-7044
  • Peña Andrés, Javier
  • Rieradevall, Joan|||0000-0003-3360-6829
Purpose: Decarbonizing cities is one of today's biggest challenges. In this regard, particular attention has been paid on improving the environmental performance of buildings. In this framework, this work consists in assessing the environmental impact of an innovative building envelope component derived from urban agriculture (UA) wastes. In fact, rooftop UA seems to be a possible solution to the rising food demand due to increasing urban demographic growth. Consequently, rooftop UA wastes need to be treated in sustainable ways. Methods: This study aims to determine the carbon footprint and embodied energy of a new infill wall material, derived from UA wastes produced by a building rooftop greenhouse tomato crop, and evaluate the potential biogenic carbon that such by-product could fix temporally until its end of life. After an initial description of the manufacturing process of the new material, its carbon footprint and embodied energy have been calculated by means of the life cycle assessment (LCA) methodology according to the ISO 14044 and the ISO 14067 guidelines adapted to the analyzed context. In particular, the inventory analysis is based on data collected from the production of samples of the new material at the laboratory scale. Results and discussion: The results of the LCA indicate that, when the biogenic carbon fixed in the UA wastes is considered, a negative carbon footprint of - 0.2 kg CO2 eq. per kg of material can be obtained. Hence, it can be assumed that from a life cycle perspective the material is able to fix carbon emissions instead of emitting them. Specifically, for the considered scenario, approximately 0.42 kg CO2 eq./m2 per year could be sequestered. However, the crop area required to produce enough waste to manufacture a unit of material is quite high. Therefore, future studies should focus on individuate solutions to reduce the density of the new component, and also different urban crops with higher waste production rates. Conclusions: The outcomes of the study put in evidence the potential of the new proposed infill wall component in fixing carbon emissions from UA, allowing to also compensate those relating to the production and transportation stages of the component life cycle. Moreover, producing by-products with UA wastes, hence temporally storing the carbon fixed by crops, may contribute to reduce the carbon cycles speed conversely to traditional waste management solutions, other than lower new raw materials depletion.