Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Advancing in the analysis of materials in electr(on)ic equipment

  • Talens Peiró, Laura|||0000-0002-1131-1838
  • Baiguera, Francesco
  • Sanclemente Crespo, Mateo|||0000-0003-0778-0946
  • colledani, marcello
  • Gabarrell Durany, Xavier|||0000-0003-1730-4337
Despite there is a great effort to support strategies for a circular economy of electr(on)ics as maintenance, repair, remanufacture and reuse, recycling keeps being the final ultimate stage reached by them. As the supply of materials has become a key issue for the economic and technology development, more information about the content of materials in electr(on)ics is in order. This is especially for printed circuit boards contained in the majority of electr(on)ics which have a great variety of materials with a significant economic value. This paper discusses two methodologies to quantify the material composition of these parts. The first methodology quantifies the material content using two algorithms to identify the typologies of electr(on)ics components, and the average material composition of some typologies of electr(on)ic components given by original manufacturers. The second methodology uses the Database of SEmiconductors (DoSE) which contains the full material composition of about 250 different electr(on)ic components of printed circuit boards. A case study based on the analysis of two models of battery management systems contained in the batteries of electric vehicles is developed to compare the material composition results obtained from the two methodologies. Although the analysis is limited to some electr(on)ic components, mainly the integrated circuit and capacitors, the results of the composition of the battery management system are given for a list of materials including aluminum, copper, iron, gold, lead, nickel and tantalum. For two of the most economically relevant materials, copper and gold, the results obtained by the two methodologies differ 2% for copper and 4% for gold. To advance towards more automatized and systematic methodologies to estimate the material composition of the battery management systems, there are some further developments needed: to increase datasets for other electr(on)ic components as connectors, and better quantification of the number of layers and finishing of the circuit boards as they are made of significant quantities of copper and gold.
TECNALIA Publications
Publicación Contribución de congreso (ConferenceOutput)

Compounding process optimization for recycled materials using machine learning algorithms

  • Lopez-Garcia, Pedro
  • Barrenetxea, Xabier
  • García-Arrieta, Sonia
  • Sedano, Iñigo
  • Palenzuela, Luis
  • Usatorre, Luis
The sustainable manufacturing of goods is one of the factors to minimize natural resource depletion and CO2 emissions. In the last decade a big effort has been done to transition from linear economy to circular economy. This transition requires to implement re-manufacturing processes into the current industrial manufacturing framework, replacing the sourcing of raw materials by re-manufacturing technologies. However, this transition is very challenging since it requires the transformation of the companies and more specially their processes, from traditional to circular. To speed up this transformation, the use of tools provided by the 4th industrial revolution are crucial. In particular, the use of artificial intelligence techniques enables the optimization of the re-manufacturing processes and make those optimizations available to all the stakeholders. This paper presents an optimization system for re-manufacturing of recycled fiber through compounding processes with materials that come from composite waste or end of life of products. The proposed approach has been trained with the data collected from several experiments carried out with a compounding machine under different specifications, fiber reinforcement grades, and output material properties. The system will allow to set up a compounding machine for different types of reinforced plastics needless of setting point experiments. The algorithms have been tested with previously unseen scenarios and they have proved to be efficient for giving the optimal material characteristics.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Investigating a repair workshop, the reuse of washing machines in Barcelona

  • Talens Peiró, Laura|||0000-0002-1131-1838
  • Garcia Fernandez, Beatriz
  • Gabarrell Durany, Xavier|||0000-0003-1730-4337
The reuse and repair of products are often good strategies from a holistic resource conservation perspective. Many organizations active in reuse concentrate in cities where a greater share of wasted electrical and electronic equipment is generated. The number of companies active in the reuse of these products is still limited, and information about the procedures and, more importantly, about the equipment effectively reused is not publicly available yet in many cases. This leads to imprecise knowledge about reuse in these organizations and unreliable data about the progress to a circular economy in cities and regions. The release of new standards on material efficiency represents a big step towards the harmonization of methods and indicators to monitor reuse and repair of products, but its use is challenging for existing workshops. This study examines the reuse of washing machines (WMs) at a local workshop with the objective of understanding the internal procedures for repair and reuse and defining indicators suitable to monitor these activities. The assessment at the company level shows that in 2018, approximately 77% of the WMs collected were recycled, 10% were repaired (80% of these needed multiple parts) and 2% were refurbished. At the product level, the proportion of reused components varies greatly from 4% to 14% when calculated by number on products to 60% when considering number balance. An economic analysis shows that using spare parts from wasted WMs increases the economic benefits up to 3-fold. In conclusion, the indicators proposed are useful to understand the performance of these workshops and potentially useful to quantify reuse at the city and regional scales.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Prospects on end of life electric vehicle batteries through 2050 in Catalonia

  • Sanclemente Crespo, Mateo|||0000-0003-0778-0946
  • Van Ginkel González, Marta
  • Talens Peiró, Laura|||0000-0002-1131-1838
As electric mobility gains prominence, the demand for electric vehicle batteries is rapidly rising. Although the amount of these batteries reaching their end of life is presently negligible, studies to quantify their flows and stocks will progressively gain importance as they have a high potential for reuse and contain some economic valuable materials. This study aims at forecasting the number of batteries due to be collected yearly from 2020 to 2050 in Catalonia (Northeast Spain). Product flow analyses are developed considering two different future electric vehicle sales, and two lifespan scenarios for batteries, assuming they follow a Weibull lifetime probability distribution. The volume of batteries reaching their first-use end of life will not reach significance until 2050, however strategies to optimise their use can be placed earlier to get prepared to the coming influxes. If future electric vehicle sales are to meet the Spanish Climate Change Law, influxes of batteries can increase up to 25-fold in 2030 and 72-fold in 2040. Under the extended battery service scenarios, the storage capacity is estimated to be 4 to 5 times larger than in scenarios where batteries are recycled earlier. The potential supply of secondary materials from end of life batteries will increase up to 80% of cobalt, copper and nickel, and 60% of lithium in 2050. The results urge to place proper management strategies for batteries in the coming years to help optimising their use and their potential recovery.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

The many faces of heating transitions. Deeper understandings of future systems in Sweden and beyond

  • Martin, Nick|||0000-0001-9023-9696
  • Zinck thellufsen, Jakob|||0000-0001-6119-4572
  • Chang, Miguel
  • Talens Peiró, Laura|||0000-0002-1131-1838
  • Madrid, Cristina|||0000-0002-4969-028X
Swedish buildings require additional heating inputs for many months each year, much of which comes from district heating systems fed by fuel combustion, electrical devices and recycled heat sources; localised heating is also generated within individual buildings. Optimised projections using the EnergyPLAN model for a so-called "smart energy" scenario predict dramatic reductions in biomass use accompanied by increases in electricity, recycled heat and biogas. Electricity generation routes are also predicted to change, shifting away from nuclear and biomass sources towards wind, solar and biogas technologies. While such transitions are expected to lower greenhouse gas emissions, current assessment methods rarely examine the breadth of other environmental and material supply aspects at play. Here, a novel new approach provides deeper insights into current and future Swedish heating scenarios for 11 key indicators by considering heat production processes over their full life cycles. Results suggest that favourable reductions are likely in five of these indicators, but these benefits are offset by unfavourable outcomes in others, including all three raw material supply indicators. Ultimately, the study provides a novel example of ways in which additional tools can complement existing modelling techniques and expand the scope of available information used to assist heating transition decisions.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Circularity scoring system, A product specific application to lithium-ion batteries of electric vehicles

  • Cruz Ugalde, José Daniel
  • Talens Peiró, Laura|||0000-0002-1131-1838
The transition towards electric mobility has gained significant momentum in recent years, raising concerns on the environmental and social implications of lithium-ion batteries. Specifically, there are ongoing challenges related to the future supply of critical raw materials and the sustainable management of used batteries with remaining capacity. To address this, a 'Circularity Scoring System' is proposed. The method aims to evaluate specific aspects of the battery design and the manufacturer's support infrastructure that currently hamper the implementation of circular economy strategies. A comprehensive list of 25 evaluation criteria was initially compiled from existing standards on material efficiency. Then, 9 criteria were ultimately selected, weighted, and defined to evaluate a battery's potential to undergo three distinct pathways: repair and reuse, remanufacturing and repurpose, or recycling. Through this method, a final score is generated for each circular strategy, providing valuable insights for continually enhancing battery design and, subsequently, their sustainability.