Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 18
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación

Overlooked factors in predicting the transition to clean electricity

  • Martin, Nick|||0000-0001-9023-9696
  • Madrid, Cristina|||0000-0002-4969-028X
  • Villalba, Gara|||0000-0001-6392-0902
  • Talens Peiró, Laura|||0000-0002-1131-1838
The transition to clean energy will require significant increases in electricity sourced from renewable energy technologies. While wind and solar photovoltaic sources are generally expected to overtake hydropower to dominate the renewable electricity supply market, numerous other technologies vie for a share in this rapidly evolving arena. To date, predicting the emergence of different technologies has relied on large-scale energy models that employ simplified optimisations of economic and emissions reductions outcomes. This is problematic as many additional factors, largely underrepresented in current models, are likely to co-determine technological emergence storylines in the real world. Here, we present a summary of the best available information for five key factors as they apply to the seven most common renewable electricity technology categories. The findings suggest that wind and solar photovoltaic technologies remain the most likely to dominate the market going forward but could face considerable raw material supply risk issues. Other potentially more desirable alternatives exist but face their own geographic and environmental limitations. Ultimately, the study demonstrates the potential and importance of expanding the use of other relevant factors in the forecasting of energy transition pathways and in the field of energy modelling as a whole.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

The optimal is not always the best, Life cycle impacts of near-optimal energy systems

  • de Tomás Pascual, Alexander|||0009-0002-4826-9685
  • Pérez-Sánchez, Laura|||0000-0002-6772-8456
  • Sierra i Montoya, Miquel|||0000-0002-7006-8911
  • Lombardi, Francesco|||0000-0002-7624-5886
  • Pfenninger-Lee, Stefan|||0000-0002-8420-9498
  • Campos, Inês|||0000-0001-5677-875X
  • Madrid, Cristina|||0000-0002-4969-028X
Energy system optimization models (ESOMs) can be used to guide long-term energy transitions but often overlook environmental impacts and the diversity of solutions close to the cost-optimal one. Here, we combine an ESOM using Modelling to Generate Alternatives (MGA) with Life Cycle Assessment (LCA) to evaluate 260 near-optimal and technologically diverse carbon-neutral energy system designs for Portugal in 2050 across five environmental indicators: climate change, land use, water use, ecotoxicity, and materials. Using the Calliope energy modelling framework and ENBIOS for environmental assessment, we find that system designs whose cost is within 10 % of the minimum feasible cost provide up to 50 % lower environmental impacts. Our results reveal a trade-off between technological diversity and environmental performance, showing that while diversity enhances resilience, this may come with a significant increase in environmental drawbacks. Solar photovoltaic and battery technologies dominate the environmental impacts, particularly in water consumption and critical material use. This study shows that traditional cost-optimal energy system designs may not be environmentally optimal. Exploring near-optimal alternatives reveals lower-impact solutions and supports more inclusive planning for energy transitions.
UVaDOC. Repositorio Documental de la Universidad de Valladolid
Publicación Artículo científico (JournalArticle)

Perspective of comprehensive and comprehensible multi-model energy and climate science in Europe

  • Nikas, Alexandros
  • Gambhir, Ajay J.
  • Trutnevyte, Evelina
  • Koasidis, Konstantinos
  • Lund, Henrik
  • Thellufsen, Jakob Zinck
  • Mayer, D
  • Zachmann, Georg
  • Miguel González, Luis Javier
  • Ferreras Alonso, Noelia
  • Sognnaes, Ida
  • Peters, Glen P.
  • Colombo, Emanuela
  • Howells, Mark I.
  • Hawkes, Adam
  • Van den Broek, M.
  • Van de Ven, Dirk Jan
  • González Eguino, Mikel
  • Flamos, Alexandros
  • Doukas, Haris
Producción Científica, Europe’s capacity to explore the envisaged pathways that achieve its near- and long-term energy and climate objectives needs to be significantly enhanced. In this perspective, we discuss how this capacity is supported by energy and climate-economy models, and how international modelling teams are organised within structured communication channels and consortia as well as coordinate multi-model analyses to provide robust scientific evidence. Noting the lack of such a dedicated channel for the highly active yet currently fragmented European modelling landscape, we highlight the importance of transparency of modelling capabilities and processes, harmonisation of modelling parameters, disclosure of input and output datasets, interlinkages among models of different geographic granularity, and employment of models that transcend the highly harmonised core of tools used in model inter-comparisons. Finally, drawing from the COVID-19 pandemic, we discuss the need to expand the modelling comfort zone, by exploring extreme scenarios, disruptive innovations, and questions that transcend the energy and climate goals across the sustainability spectrum. A comprehensive and comprehensible multi-model framework offers a real example of “collective” science diplomacy, as an instrument to further support the ambitious goals of the EU Green Deal, in compliance with the EU claim to responsible research., H2020 European Commission Projects “PARIS REINFORCE” under Grant Agreement No. 820846, “LOCOMOTION” under Grant Agreement No. 821105, “SENTINEL” under Grant Agreement No. 837089, and “NAVIGATE” under Grant Agreement No. 821124.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Perspective of comprehensive and comprehensible multi-model energy and climate science in Europe

  • Nikas, A.
  • Gambhir, A.
  • Trutnevyte, E.
  • Koasidis, K.
  • Lund, H.
  • Thellufsen, J.Z.
  • Mayer, D.
  • Zachmann, G.
  • Miguel, L.J.
  • Ferreras-Alonso, N.
  • Sognnaes, I.
  • Peters, G.P.
  • Colombo, E.
  • Howells, M.
  • Hawkes, A.
  • van den Broek, M.
  • Van de Ven, Dirk-Jan
  • González-Eguino, Mikel
  • Flamos, A.
  • Doukas, H.
Europe’s capacity to explore the envisaged pathways that achieve its near- and long-term energy and climate objectives needs to be significantly enhanced. In this perspective, we discuss how this capacity is supported by energy and climate-economy models, and how international modelling teams are organised within structured communication channels and consortia as well as coordinate multi-model analyses to provide robust scientific evidence. Noting the lack of such a dedicated channel for the highly active yet currently fragmented European modelling landscape, we highlight the importance of transparency of modelling capabilities and processes, harmonisation of modelling parameters, disclosure of input and output datasets, interlinkages among models of different geographic granularity, and employment of models that transcend the highly harmonised core of tools used in model inter-comparisons. Finally, drawing from the COVID-19 pandemic, we discuss the need to expand the modelling comfort zone, by exploring extreme scenarios, disruptive innovations, and questions that transcend the energy and climate goals across the sustainability spectrum. A comprehensive and comprehensible multi-model framework offers a real example of “collective” science diplomacy, as an instrument to further support the ambitious goals of the EU Green Deal, in compliance with the EU claim to responsible research., This work was supported by the H2020 European Commission Projects “PARIS REINFORCE” under Grant Agreement No. 820846 , “LOCOMOTION” under Grant Agreement No. 821105, “SENTINEL” under Grant Agreement No. 837089, and “NAVIGATE” under Grant Agreement No. 821124. The sole responsibility for the content of this paper lies with the authors; the paper does not necessarily reflect the opinion of the European Commission.
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Spatial integration for firm and load-following wind generation

  • López Prol, Javier
  • DeLlano-Paz, Fernando
  • Calvo-Silvosa, Anxo
  • Pfenninger, Stefan
  • Staffell, Iain
[Abstract]: Wind power has considerable potential to decarbonise electricity systems due to its low cost and wide availability. However, its variability is one factor limiting uptake. We propose a simple analytical framework to optimise the distribution of wind capacity across regions to achieve a maximally firm or load-following profile. We develop a novel dataset of simulated hourly wind capacity factors (CFs) with bias correction for 111 Chinese provinces, European countries and US states spanning ten years (∼10 million observations). This flexible framework allows for near-optimal analysis, integration of demand, and consideration of additional decision criteria without additional modelling. We find that spatial integration of wind resources optimising the distribution of capacities provides significant benefits in terms of higher CF or lower residual load and lower variability at sub-, quasi- and inter-continental levels. We employ the concept of firmness as achieving a reliable and certain generation profile and show that, in the best case, the intercontinental interconnection between China, Europe and the US could restrict wind CFs to within the range of 15%–40% for 99% of the time. Smaller configurations corresponding to existing electricity markets also provide more certain and reliable generation profiles than isolated individual regions, J L P gratefully acknowledges the support of the Green Finance Specialist Education and training Program of the Korea Ministry of Environment, which partially funded this research. S P and I S were funded through the European Union’s Horizon 2020 research and innovation programme under Grant Agreement No.837089. I S also acknowledges support from EPSRC via EP/R045518/1
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Wind-solar technological, spatial and temporal complementarities in Europe: A portfolio approach

  • López Prol, Javier
  • DeLlano-Paz, Fernando
  • Calvo-Silvosa, Anxo
  • Pfenninger, Stefan
  • Staffell, Iain
[Abstract]: Climate change and geopolitical risks call for the rapid transformation of electricity systems worldwide, with Europe at the forefront. Wind and solar are the lowest cost, lowest risk, and cleanest energy sources, but their variability poses integration challenges. Combining both technologies and integrating regions with dissimilar generation patterns optimizes the trade-off between maximizing energy output and minimizing its variability, which respectively give the lowest levelized cost and lowest integration cost. We apply the Markowitz meanvariance framework to a rich multi-decade dataset of wind and solar productivity to quantify the potential benefits of spatially integration of renewables across European countries at hourly, daily and monthly timescales. We find that optimal cross-country coordination of wind and solar capacities across Europe’s integrated electricity system increases capacity factor by 22% while reducing hourly variability by 26%. We show limited benefits to solar integration due to consistent output profiles across Europe. Greater wind integration yields larger benefits due to the diversity of regional weather patterns. This framework shows the importance of considering renewable projects not in isolation, but as interconnected parts of a pan-continental system. Our results can guide policymakers towards strategic energy plans that reduce system-wide costs of renewable electricity, accelerating the clean energy transition, JLP gratefully acknowledges the support of the Green Finance Specialist Education and Training Program of the Korea Ministry of Environment, which partially funded this research. IS and SP were funded through the European Union’s Horizon 2020 research and innovation programme under grant agreement No 837089. IS also acknowledges support from EPSRC via EP/R045518/1., United Kingdom. Engineering and Physical Sciences Research Council; EP/R045518/1
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Global and regional estimation and evaluation of suitable roof area for solar and green roof applications

  • Ürge-Vorsatz, Diana
  • Chatterjee, Souran
  • Cabeza, Luisa F.
  • Molnár, Gergely
Buildings contribute to 40% of energy consumption and 30% of CO2 emissions in 2019 globally, therefore it is necessary to exploit different solutions to decrease the corresponding energy demand, including green and cool roofs as well as on-site energy generation. To evaluate the potential of such technologies, one major input data for models and calculations is the available roof area, yet the literature shows a huge knowledge gap in this regard. Therefore, this paper contributes to filling this gap by estimating the roof availability over the period 2022-2060, using the detailed regional projections of the BISE (Building Integrated Solar Energy) model. Our results show that the roof area is likely to increase globally and in most of the analysed regions over the forthcoming decades, driven primarily by newly built tertiary buildings. In European context, the future increase of commercial/public rooftops is projected to be more pronounced for the western countries, although the overall growth is predicted to be slightly offset by shrinking residential rooftops both in the western and eastern regions. This study also demonstrates that despite the shading-related uncertainties of the estimation, the dimension of the available rooftop area could ensure significant potential for energy production and thermal regulation., This paper is based on research conducted within the EC funded Horizon 2020 Framework Programme for Research and Innovation (EU H2020) Project titled “Sustainable Energy Transitions Laboratory” (SENTINEL)- Grant Agreement No. 837089. Dr. Ürge-Vorsatz, Dr. Chatterjee and Dr. Molnár would like to acknowledge the support from the EC. The content of the paper is the sole responsibility of its authors and does not necessarily reflect the views of the EC. Dr. Ürge-Vorsatz and Dr. Chatterjee also received funding from the Energy Demand changes Induced by Technological and Social innovations (EDITS) project, which is part of the initiative coordinated by the Research Institute of Innovative Technology for the Earth (RITE) and International Institute for Applied Systems Analysis (IIASA) (and funded by Ministry of Economy, Trade, and Industry (METI), Japan). Dr. Cabeza would like to thank the Catalan Government for the quality accreditation given to her research group (2021 SGR 01615). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Modelling the building-related photovoltaic power production potential in the light of the EU's Solar Rooftop Initiative

  • Molnár, Gergely
  • Cabeza, Luisa F.
  • Chatterjee, Souran
  • Ürge-Vorsatz, Diana
Decarbonizing the building sector is key to meet the EU climate goals by 2050. Although the recent policies recognized the importance of on-site solar energy production in the energy transition, there are only a few modelling studies analyzing how much the gap between the technically possible and policy-driven power generation of rooftop photovoltaic (PV) panels can be reduced. This study, therefore, uses geospatial techniques and the high-resolution Building Integrated Solar Energy (BISE) supply model to estimate the main spatial and temporal characteristics of the rooftop PV energy production potential. To support decision-making, important implications of the Solar Rooftop Initiative action plan of the European Commission on the future dimension of the PV electricity supply are also assessed in the context of the achievable potential. The modelling results indicate that the current rooftop PV technical potential could be about 2.7 PWh, being in similar extent with the EU power consumption. The largest country-level PV potentials can be found in Germany, France, Italy and Poland, with an increase of 30% by 2060. Our findings also underline that by following the latest policies, major improvement could be achieved in the EU's rooftop solar energy production by around 2040, depending greatly on the structure and energy efficiency niveau of the future building stock., This paper is based on research conducted within the EC funded Horizon 2020 Framework Programme for Research and Innovation (EU H2020) Project titled “Sustainable Energy Transitions Laboratory” (SENTINEL)- Grant Agreement No. 837089. Dr. Ürge-Vorsatz, Dr. Chatterjee, and Dr. Molnár would like to acknowledge the support from the EC. The content of the paper is the sole responsibility of its authors and does not necessarily reflect the views of the EC. Dr. Ürge-Vorsatz and Dr. Chatterjee have also received funding from the Energy Demand changes Induced by Technological and Social innovations (EDITS) project, which is part of the initiative coordinated by the Research Institute of Innovative Technology for the Earth (RITE) and International Institute for Applied Systems Analysis (IIASA) (and funded by Ministry of Economy, Trade, and Industry (METI), Japan). This work is partially supported by ICREA under the ICREA Academia programme. Dr. Cabeza would like to thank the Catalan Government for the quality accreditation given to her research group (2017 SGR 1537). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

The potential of local food, energy, and water production systems on urban rooftops considering consumption patterns and urban morphology

  • Toboso-Chavero, S.
  • Montealegre, A. L.
  • García-Pérez, S.
  • Sierra-Pérez, J.
  • Muñoz-Liesa, J.
  • Gabarrell Durany, X.
  • Villalba, G.
  • Madrid-López, C.
The external resource dependency of urban areas results in the externalization of environmental and socioeconomic impacts. Implementing food, energy and water production systems on urban rooftops (roof mosaics) can potentially help cities become more self-sufficient but depends on the city's urban morphology. We studied the supply potential and impacts of four roof mosaic scenarios for different urban forms in Cerdanyola, a 58 thousand-inhabitant town in the metropolitan area of Barcelona. We combined spatial analysis of potential rooftops, metabolism analysis, and social and environmental impacts. The municipality has an average rooftop/household potential of 31 m2 on which to implement any of the mosaic scenarios, with the highest potential in the single-family housing typology. The highest level of vegetable self-sufficiency was found in housing estates (32%), and the lowest in originary fabrics (28%). Regarding electricity and water self-sufficiency, the highest self-sufficiency level was found in the single-family housing typology (51% and 14%, respectively) and the lowest in housing estates (26% and 8%, respectively). Regarding impacts, the implementation of the electricity and rainwater harvesting systems depicts the most positive indicators in single-family housing areas. However, for housing estates and originary fabrics typologies, the best performance is shown to be in the implementation of rooftop farming systems.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Modelling the building-related photovoltaic power production potential in the light of the EU's Solar Rooftop Initiative

  • Molnár, Gergely
  • Cabeza, Luisa F.
  • Chatterjee, Souran
  • Ürge-Vorsatz, Diana
Decarbonizing the building sector is key to meet the EU climate goals by 2050. Although the recent policies recognized the importance of on-site solar energy production in the energy transition, there are only a few modelling studies analyzing how much the gap between the technically possible and policy-driven power generation of rooftop photovoltaic (PV) panels can be reduced. This study, therefore, uses geospatial techniques and the high-resolution Building Integrated Solar Energy (BISE) supply model to estimate the main spatial and temporal characteristics of the rooftop PV energy production potential. To support decision-making, important implications of the Solar Rooftop Initiative action plan of the European Commission on the future dimension of the PV electricity supply are also assessed in the context of the achievable potential. The modelling results indicate that the current rooftop PV technical potential could be about 2.7 PWh, being in similar extent with the EU power consumption. The largest country-level PV potentials can be found in Germany, France, Italy and Poland, with an increase of 30% by 2060. Our findings also underline that by following the latest policies, major improvement could be achieved in the EU's rooftop solar energy production by around 2040, depending greatly on the structure and energy efficiency niveau of the future building stock., This paper is based on research conducted within the EC funded Horizon 2020 Framework Programme for Research and Innovation (EU H2020) Project titled “Sustainable Energy Transitions Laboratory” (SENTINEL)- Grant Agreement No. 837089. Dr. Ürge-Vorsatz, Dr. Chatterjee, and Dr. Molnár would like to acknowledge the support from the EC. The content of the paper is the sole responsibility of its authors and does not necessarily reflect the views of the EC. Dr. Ürge-Vorsatz and Dr. Chatterjee have also received funding from the Energy Demand changes Induced by Technological and Social innovations (EDITS) project, which is part of the initiative coordinated by the Research Institute of Innovative Technology for the Earth (RITE) and International Institute for Applied Systems Analysis (IIASA) (and funded by Ministry of Economy, Trade, and Industry (METI), Japan). This work is partially supported by ICREA under the ICREA Academia programme. Dr. Cabeza would like to thank the Catalan Government for the quality accreditation given to her research group (2017 SGR 1537). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Global and regional estimation and evaluation of suitable roof area for solar and green roof applications

  • Ürge-Vorsatz, Diana
  • Chatterjee, Souran
  • Cabeza, Luisa F.
  • Molnár, Gergely
Buildings contribute to 40% of energy consumption and 30% of CO2 emissions in 2019 globally, therefore it is necessary to exploit different solutions to decrease the corresponding energy demand, including green and cool roofs as well as on-site energy generation. To evaluate the potential of such technologies, one major input data for models and calculations is the available roof area, yet the literature shows a huge knowledge gap in this regard. Therefore, this paper contributes to filling this gap by estimating the roof availability over the period 2022-2060, using the detailed regional projections of the BISE (Building Integrated Solar Energy) model. Our results show that the roof area is likely to increase globally and in most of the analysed regions over the forthcoming decades, driven primarily by newly built tertiary buildings. In European context, the future increase of commercial/public rooftops is projected to be more pronounced for the western countries, although the overall growth is predicted to be slightly offset by shrinking residential rooftops both in the western and eastern regions. This study also demonstrates that despite the shading-related uncertainties of the estimation, the dimension of the available rooftop area could ensure significant potential for energy production and thermal regulation., This paper is based on research conducted within the EC funded Horizon 2020 Framework Programme for Research and Innovation (EU H2020) Project titled “Sustainable Energy Transitions Laboratory” (SENTINEL)- Grant Agreement No. 837089. Dr. Ürge-Vorsatz, Dr. Chatterjee and Dr. Molnár would like to acknowledge the support from the EC. The content of the paper is the sole responsibility of its authors and does not necessarily reflect the views of the EC. Dr. Ürge-Vorsatz and Dr. Chatterjee also received funding from the Energy Demand changes Induced by Technological and Social innovations (EDITS) project, which is part of the initiative coordinated by the Research Institute of Innovative Technology for the Earth (RITE) and International Institute for Applied Systems Analysis (IIASA) (and funded by Ministry of Economy, Trade, and Industry (METI), Japan). Dr. Cabeza would like to thank the Catalan Government for the quality accreditation given to her research group (2021 SGR 01615). GREiA is certified agent TECNIO in the category of technology developers from the Government of Catalonia. This work is partially supported by ICREA under the ICREA Academia programme.
Dipòsit Digital de Documents de la UAB
Publicación Estudio, informe, memoria (Report)

Deliverable 2.4. Model development to match models to user needs, Sustainable Energy Transitions Laboratory (SENTINEL) project

  • Madrid, Cristina|||0000-0002-4969-028X
  • Talens Peiró, Laura|||0000-0002-1131-1838
  • Martin, Nick|||0000-0001-9023-9696
  • Süsser, Diana|||0000-0002-9757-3491
  • Lilliestam, Johan|||0000-0001-6913-5956
  • Stavrakas, Vassilis|||0000-0003-1073-4561
  • Flamos, Alexandros|||0000-0001-9279-9638
Although energy models advance rapidly in termsof technical and techno-economic details, social and political aspects and environmental burdensbeyond greenhouse gas emissions are currently underrepresented. However, in light of the European Green Deal and the EU Energy Union Strategy, models must advance in terms of social and environmental considerations to support decision-and policymakers in adequately addressing that environmental burdenand to put "citizens at its core" of the energy transition. In this deliverable, we present key user-needs for environmentaland social aspects that need to be better represented in energy system models (Section 2), and how we have developed and adapted the modelling tools ENVIRO, QTDIAN, and ATOM in response to the identifieduserneeds. We showthree main userneeds regarding social aspects, specifically(i)social impacts on energy politics and policies, (ii) the social acceptance of energy technologiesand infrastructure, and (iii) consumers'behavior in energy models. We furthermore show that users consider relevant the following factors within the environmental aspects of energy scenarios: (iv) demandof raw materials/circularity, (v) the implications on nature and biodiversity, as well as (vi) full life-cycle impactsand externalization.ENVIRO and QTDIANare being developed within SENTINEL in a participatory process by engaging with stakeholdersin the information and development stagesof the model implementation. In contrast, ATOM is adapted by consideringuser-needs especially in the implementationstage. We conclude that we have benefited from the insights of model users and other stakeholders, and that this will allow us to make our modelling tools fit-for-purpose. All three modelling tools will support decision-makers by answering the most importantof the questions usershave risenwithin the SENTINEL stakeholder engagement process. Model-linking within the WP2 and other WPs will ensure that the understanding of environmental and social aspects is strengthened in energy system models and will be embedded in the overall SENTINEL platform.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Integration of raw materials aspects of energy technologies into energy system models

  • Talens Peiró, Laura|||0000-0002-1131-1838
  • Martin, Nick|||0000-0001-9023-9696
  • Villalba, Gara|||0000-0001-6392-0902
  • Madrid, Cristina|||0000-0002-4969-028X
Raw materials and their related environmental impacts will play a key role in the implementation of renewable energy infrastructures for decarbonization. Despite the growing amount of data quantifying raw materials for energy production technologies, few examples of these data sources are being included in current energy system models. Accordingly, this paper introduces possible pathways for integrating material-specific life cycle assessment outputs and material metabolism indicators into energy system models so that raw material requirements, and their associated impacts, can be accounted for. The paper discusses the availability of life cycle inventories, impact assessment methods and important output indicators. The material metabolism indicators most relevant to the current policy debate surrounding the European Green Deal-namely, material supply risk and contribution of recycled materials to total supply-are also discussed alongside the value of adding this information to energy system models. A methodology for using data from both approaches is offered and operationalised using four sub-technologies of both wind turbines and solar photovoltaic panels as case studies. The results show that considerable variation exists between and within the two groups for all indicators. The technologies with the lowest global warming potential, cumulative energy demand and supply risk are turbines with gearbox double-fed induction generators and cadmium telluride photovoltaics. Furthermore, wind turbines exhibit significantly higher recycling rates than photovoltaics. Ultimately, the integration of such methodologies into energy system models could greatly increase the awareness of raw material issues and guide policies that maximise compatibilities between resource availability and cleaner energy systems.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Why energy models should integrate social and environmental factors, Assessing user needs, omission impacts, and real-word accuracy in the European Union

  • Süsser, Diana|||0000-0002-9757-3491
  • Martin, Nick|||0000-0001-9023-9696
  • Stavrakas, Vassilis|||0000-0003-1073-4561
  • Gaschnig, Hannes
  • Talens Peiró, Laura|||0000-0002-1131-1838
  • Flamos, Alexandros|||0000-0001-9279-9638
  • Madrid, Cristina|||0000-0002-4969-028X
  • Lilliestam, Johan|||0000-0001-6913-5956
Energy models are used to inform and support decisions within the transition to climate neutrality. In recent years, such models have been criticised for being overly techno-centred and ignoring environmental and social factors of the energy transition. Here, we explore and illustrate the impact of ignoring such factors by comparing model results to model user needs and real-world observations. We firstly identify concrete user needs for better representation of environmental and social factors in energy modelling via interviews, a survey and a workshop. Secondly, we explore and illustrate the effects of omitting non-techno-economic factors in modelling by contrasting policy-targeted scenarios with reality in four EU case study examples. We show that by neglecting environmental and social factors, models risk generating overly optimistic and potentially misleading results, for example by suggesting transition speeds far exceeding any speeds observed, or pathways facing hard-to-overcome resource constraints. As such, modelled energy transition pathways that ignore such factors may be neither desirable nor feasible from an environmental and social perspective, and scenarios may be irrelevant in practice. Finally, we discuss a sample of recent energy modelling innovations and call for continued and increased efforts for improved approaches that better represent environmental and social factors in energy modelling and increase the relevance of energy models for informing policymaking.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

New Techniques for Assessing Critical Raw Material Aspects in Energy and Other Technologies

  • Martin, Nick|||0000-0001-9023-9696
  • Madrid, Cristina|||0000-0002-4969-028X
  • Villalba, Gara|||0000-0001-6392-0902
  • Talens Peiró, Laura|||0000-0002-1131-1838
Transitioning to more sustainable energy technologies is a vital step in the move toward reducing global greenhouse gas emissions. However, several physical constraints could hinder the implementation of these technologies, and many of the raw materials required to produce new infrastructure are scarce, nonrenewable, and nonsubstitutable. Various factors relating to material extraction and processing activities may also affect the security and sociopolitical aspects of future supply lines. Here, we introduce methods for quantifying three key indicators relating to raw material supplies for specific production processes: (1) overall supply risk, (2) environmental impacts from sourcing raw materials, and (3) environmental justice threats at sourcing locations. The use of the proposed methods is demonstrated via an exploratory case study examining projected electricity production scenarios within the European Union. Results suggest that renewable sources of electricity─particularly wind, solar, and geothermal technologies─are more likely to exacerbate supply risks and environmental issues than other technologies. Furthermore, projected expansions of wind and solar technologies mean that all three indicators appear likely to rise significantly systemwide by 2050. Ultimately, the methods represent a much-needed first attempt at providing practitioners with simple and robust approaches for integrating factors relating specifically to raw material supply into energy modeling and other applications.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

An energy future beyond climate neutrality, Comprehensive evaluations of transition pathways

  • Martin, Nick|||0000-0001-9023-9696
  • Talens Peiró, Laura|||0000-0002-1131-1838
  • Villalba, Gara|||0000-0001-6392-0902
  • Nebot-Medina, Rafael
  • Madrid, Cristina|||0000-0002-4969-028X
Many of the long-term policy decisions surrounding the sustainable energy transition rely on models that fail to consider environmental impacts and constraints beyond direct greenhouse gas emissions and land occupation. Such assessments offer incomplete and potentially misleading information about the true sustainability issues of transition pathways. Meanwhile, although decision-makers desire greater access to a broader range of environmental, material and socio-economic indicators, few tools currently address this gap. Here, we introduce ENBIOS, a framework that integrates a broader range of such indicators into energy modelling and policymaking practices. By calculating sustainability-related indicators across hierarchical levels, we reach deeper understandings of the potential energy systems to be derived. With ENBIOS, we analyse a series of energy pathways designed by the Calliope energy system optimization model for the European energy system in 2030 and 2050. Although overall emissions will drop significantly, considerable rises in land, labour and critical raw material requirements are likely. These outcomes are further reflected in unfavourable shifts in key metabolic indicators during this period; energy metabolic rate of the system will drop by 25.6%, land requirement-to-energy will quadruple, while the critical raw material supply risk-to-energy ratio will rise by 74.2%. Heat from biomass and electricity from wind and solar are shown to be the dominant future processes across most indicator categories.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

The potential of local food, energy, and water production systems on urban rooftops considering consumption patterns and urban morphology

  • Toboso-Chavero, Susana|||0000-0001-8475-5184
  • Montealegre, Antonio Luis
  • García Pérez, Sergio|||0000-0002-1672-4965
  • Sierra-Pérez, Jorge|||0000-0002-7660-3508
  • Muñoz Liesa, Joan|||0000-0001-8442-6399
  • Gabarrell Durany, Xavier|||0000-0003-1730-4337
  • Villalba, Gara|||0000-0001-6392-0902
  • Madrid, Cristina|||0000-0002-4969-028X
The external resource dependency of urban areas results in the externalization of environmental and socioeconomic impacts. Implementing food, energy and water production systems on urban rooftops (roof mosaics) can potentially help cities become more self-sufficient but depends on the city's urban morphology. We studied the supply potential and impacts of four roof mosaic scenarios for different urban forms in Cerdanyola, a 58 thousand-inhabitant town in the metropolitan area of Barcelona. We combined spatial analysis of potential rooftops, metabolism analysis, and social and environmental impacts. The municipality has an average rooftop/household potential of 31 m2 on which to implement any of the mosaic scenarios, with the highest potential in the single-family housing typology. The highest level of vegetable self-sufficiency was found in housing estates (32%), and the lowest in originary fabrics (28%). Regarding electricity and water self-sufficiency, the highest self-sufficiency level was found in the single-family housing typology (51% and 14%, respectively) and the lowest in housing estates (26% and 8%, respectively). Regarding impacts, the implementation of the electricity and rainwater harvesting systems depicts the most positive indicators in single-family housing areas. However, for housing estates and originary fabrics typologies, the best performance is shown to be in the implementation of rooftop farming systems.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

The many faces of heating transitions. Deeper understandings of future systems in Sweden and beyond

  • Martin, Nick|||0000-0001-9023-9696
  • Zinck thellufsen, Jakob|||0000-0001-6119-4572
  • Chang, Miguel
  • Talens Peiró, Laura|||0000-0002-1131-1838
  • Madrid, Cristina|||0000-0002-4969-028X
Swedish buildings require additional heating inputs for many months each year, much of which comes from district heating systems fed by fuel combustion, electrical devices and recycled heat sources; localised heating is also generated within individual buildings. Optimised projections using the EnergyPLAN model for a so-called "smart energy" scenario predict dramatic reductions in biomass use accompanied by increases in electricity, recycled heat and biogas. Electricity generation routes are also predicted to change, shifting away from nuclear and biomass sources towards wind, solar and biogas technologies. While such transitions are expected to lower greenhouse gas emissions, current assessment methods rarely examine the breadth of other environmental and material supply aspects at play. Here, a novel new approach provides deeper insights into current and future Swedish heating scenarios for 11 key indicators by considering heat production processes over their full life cycles. Results suggest that favourable reductions are likely in five of these indicators, but these benefits are offset by unfavourable outcomes in others, including all three raw material supply indicators. Ultimately, the study provides a novel example of ways in which additional tools can complement existing modelling techniques and expand the scope of available information used to assist heating transition decisions.