Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 12
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Automated synthesis of transmission lines loaded with complementary split ring resonators (CSRRs) and open complementary split ring resonators (OCSRRs) through aggressive space mapping (ASM)

  • Selga Ruiz, Jordi|||0000-0002-1660-500X
  • Rodríguez, Ana
  • Orellana Gutiérrez, Marco Antonio
  • Boria, Vicente E.
  • Martín, Ferran|||0000-0002-1494-9167
This paper is focused on the application of space mapping optimization to the automated synthesis of transmission lines loaded with complementary split ring resonators (CSRRs) and open complementary split ring resonators (OCSRRs). These structures are of interest for the implementation of resonant-type metamaterial transmission lines and for the design of planar microwave circuits based on such complementary resonators. The paper presents a method to generate the layouts of CSRR- and OCSRR-loaded microstrip lines from the elements of their equivalent circuit models. Using the so-called aggressive space mapping, a specific implementation that uses quasi-Newton type iteration, we have developed synthesis algorithms that are able to provide the topology of these CSRR- and OCSRR-loaded lines in few steps. The most relevant aspect, however, is that this synthesis process is completely automatic, i.e., it does not require any action from the designers, other than initiating the algorithm. Moreover, this technique can be translated to other electrically small planar elements described by lumped element equivalent circuit models.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Effects of inter-resonator coupling in split ring resonator loaded metamaterial transmission lines

  • Naqui Garolera, Jordi|||0000-0001-5660-1516
  • Fernández-Prieto, Armando|||0000-0002-1158-6049
  • Mesa Ledesma, Francisco
  • Medina, Francisco|||0000-0002-9947-506X
  • Martín, Ferran|||0000-0002-1494-9167
This paper investigates the effects of inter-resonator coupling in metamaterial transmission lines loaded with split ring resonators (SRRs). The study is performed from Bloch mode theory applied to the multiport equivalent circuit model of the unit cell of such artificial lines. From this analysis, it follows that the stopband bandwidth, inherent to SRR-loaded lines, is enhanced as inter-resonator coupling strengthens, and this enhancement is attributed to the presence of complex modes. The theoretical results are corroborated through calculation of the dispersion relation using a full-wave eigenmode solver, and also by measuring the frequency response of SRR-loaded lines with different inter-resonator distance and, hence, coupling.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Selective mode suppression in microstrip differential lines by means of electric-LC (ELC) and magnetic-LC (MLC) resonators

  • Naqui Garolera, Jordi|||0000-0001-5660-1516
  • Durán-Sindreu, Miguel|||0000-0002-1459-9857
  • Martín, Ferran|||0000-0002-1494-9167
In this paper, it is demonstrated that the so-called electric-LC (ELC) resonators, and their dual counterparts, the magnetic-LC (MLC) resonators, are useful for the selective suppression of either the differential or the common mode in microstrip differential lines. The key point to mode suppression is the alignment of the resonator with the electric (differential mode) or magnetic (common mode) wall of the line. It is shown that by simply rotating the resonators 90∘ we can selectively choose the suppressed mode in the vicinity of the resonator's fundamental resonance frequency. The theory is validated through full-wave electromagnetic simulation, the lumped element equivalent circuit models of the proposed structures and experimental data.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Compact dual-band differential power splitter with common-mode suppression and filtering capability based on differential-mode composite right/left-handed transmission-line metamaterials

  • Vélez, Paris|||0000-0001-6502-5987
  • Durán-Sindreu, Miguel|||0000-0002-1459-9857
  • Fernández-Prieto, Armando|||0000-0002-1158-6049
  • Bonache, Jordi|||0000-0002-7225-5737
  • Medina, Francisco|||0000-0002-9947-506X
  • Martín, Ferran|||0000-0002-1494-9167
This letter presents a compact differential-mode (balanced) power splitter with filtering capability and dual-band functionality. This multifunctional device is based on differential-mode composite right/left-handed (DM-CRLH) transmission lines specifically designed to achieve the dual-band behavior and to suppress the common-mode noise over a broad frequency band. The DM-CRLH lines are implemented by means of pairs of CRLH lines with series connected interdigital capacitors and strip inductors in the series branches and mirrored step impedance resonators (SIRs) in the shunt branches. For the differential mode, the SIRs are described by parallel resonant tanks, and the resulting equivalent circuit model is the canonical circuit of a CRLH line, which can be used for designing the dual-band balanced splitter/filter. However, the SIRs are opened under common-mode operation, introducing transmission zeros for that mode. By tailoring the position of these transmission zeros, the common mode can be effectively rejected over a frequency band that covers the splitter operating frequencies. The fabricated dual-band balanced power splitter exhibits a measured matching level better than -11 dB, and measured insertion losses (power splitting) lower than 4.1 dB at the design frequencies (f₁=1.8 GHz and f₂=2.4 GHz). The common-mode suppression at f₁ and f₂ is better than 30 dB.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Two-dimensional alignment and displacement sensor based on movable broadside-coupled split ring resonators

  • Karami-Horestani, Ali|||0000-0002-7747-2554
  • Naqui Garolera, Jordi|||0000-0001-5660-1516
  • Shaterian, Zahra
  • Abbott, Derek|||0000-0002-0945-2674
  • Fumeaux, Cristophe
  • Martín, Ferran|||0000-0002-1494-9167
This paper proposes a two-dimensional alignment and displacement sensor based on movable broadside-coupled split ring resonators (BC-SRRs). As a basis for this sensor, a one-dimensional displacement sensor based on a microstrip line loaded with BC-SRRs is presented firstly. It is shown that compared to previously published displacement sensors, based on SRR-loaded coplanar waveguides, the proposed one-dimensional sensor benefits from a much wider dynamic range. Secondly, it is shown that with modifications in the geometry of the BC-SRRs, the proposed one-dimensional sensor can be modified and extended by adding a second element to create a high-dynamic range two-dimensional displacement sensor. Since the proposed sensors operate based on a split in the resonance frequency, rather than the resonance depth, they benefit from a high immunity to environmental noise. Furthermore, since the sensors' principle of operation is based on the deviation from symmetry, they are more robust to ambient conditions such as changes in the temperature, and thus they can be used as alignment sensors as well. A prototype of the proposed two-dimensional sensor is fabricated and the concept and simulation results are validated through experiment.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Common-mode suppressed differential bandpass filter based on open complementary split ring resonators fabricated in microstrip technology without ground plane etching

  • Vélez, Paris|||0000-0001-6502-5987
  • Durán-Sindreu, Miguel|||0000-0002-1459-9857
  • Naqui Garolera, Jordi|||0000-0001-5660-1516
  • Bonache, Jordi|||0000-0002-7225-5737
  • Martín, Ferran|||0000-0002-1494-9167
A differential (or balanced) bandpass filter based on open complementary split ring resonators (OCSRRs) coupled through admittance inverters is presented in this article. Pairs of OCSRRs are symmet- rically placed in a mirror configuration between the strips of the differential line and are modeled by means of two series connected parallel resonators. For the differential (odd) mode, there is a virtual ground at the connecting plane between the OCSRR pairs, and the structure is roughly described by the canonical model of a bandpass filter, consisting of a cascade of shunt resonators coupled through admittance inverters. It is demonstrated that, through a proper design of the OCSRR stages, the common mode noise in the vicinity of the differential filter pass band can be efficiently suppressed. Due to the differential mode operation of the filter, it is not necessary to incorporate metallic vias to ground the OCSRRs. Moreover, as compared to other differential filters based on OCSRRs, defected ground structures are not present in the proposed filters. To illustrate the potential of the approach, two balanced bandpass filters are designed, fabricated, and characterized.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Angular displacement and velocity sensors based on electric-LC (ELC) loaded microstrip lines

  • Naqui Garolera, Jordi|||0000-0001-5660-1516
  • Martín, Ferran|||0000-0002-1494-9167
Planar microwave angular displacement and angular velocity sensors implemented in microstrip technology are proposed. The transducer element is a circularly shaped divider/combiner, whereas the sensing element is an electricLC resonator, attached to the rotating object and magnetically coupled to the circular (active) region of the transducer. The angular variables are measured by inspection of the transmission characteristics, which are modulated by the magnetic coupling between the resonator and the divider/combiner. The degree of coupling is hence sensitive to the angular position of the resonator. As compared with coplanar waveguide angular displacement and velocity sensors, the proposed microstrip sensors do not require air bridges, and the ground plane provides backside isolation.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

S-shaped complementary split ring resonators and their application to compact differential bandpass filters with common-mode suppression

  • Karami-Horestani, Ali|||0000-0002-7747-2554
  • Durán-Sindreu, Miguel|||0000-0002-1459-9857
  • Naqui Garolera, Jordi|||0000-0001-5660-1516
  • Fumeaux, Cristophe
  • Martín, Ferran|||0000-0002-1494-9167
This letter presents an S-shaped complementary split ring resonator (S-CSRR) for application in compact differential filters. The working principle of the proposed S-CSRR is explained and a circuit model is developed and validated through electromagnetic simulations. It is shown that an S-CSRR-loaded differential microstrip line with series gaps can be used in the design of compact differential bandpass filters (BPFs) with common-mode suppression. The filter design procedure is explained and the theoretical concept is validated through fabrication and measurement of a compact (0.09 λg 0.25 λg) third-order differential BPF with common-mode suppression.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Mechanically reconfigurable microstrip lines loaded with stepped impedance resonators and potential applications

  • Naqui Garolera, Jordi|||0000-0001-5660-1516
  • Martín, Ferran|||0000-0002-1494-9167
This paper is focused on exploring the possibilities and potential applications of microstrip transmission lines loaded with stepped impedance resonators (SIRs) etched on top of the signal strip, in a separated substrate. It is shown that if the symmetry plane of the line (a magnetic wall) is perfectly aligned with the electric wall of the SIR at the fundamental resonance, the line is transparent. However, if symmetry is somehow ruptured, a notch in the transmission coefficient appears. The notch frequency and depth can thus be mechanically controlled, and this property can be of interest for the implementation of sensors and barcodes, as it is discussed.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Analysis of transmission lines loaded with pairs of coupled resonant elements and application to sensors

  • Naqui Garolera, Jordi|||0000-0001-5660-1516
  • Su, Lijuan|||0000-0002-4753-9340
  • Mata Contreras, Francisco Javier|||0000-0001-6116-8681
  • Martín, Ferran|||0000-0002-1494-9167
This paper is focused on the analysis of transmission lines loaded with pairs of magnetically coupled resonators. We have considered two different structures: (i) a microstrip line loaded with pairs of stepped impedance resonators (SIRs), and (ii) a coplanar waveguide (CPW) transmission line loaded with pairs of split ring resonators (SRRs). In both cases, the line exhibits a single resonance frequency (transmission zero) if the resonators are identical (symmetric structure with regard to the line axis), and this resonance is different to the one of the line loaded with a single resonator due to inter-resonator coupling. If the structures are asymmetric, inter-resonator coupling enhances the distance between the two split resonance frequencies that arise. In spite that the considered lines and loading resonators are very different and are described by different lumped element equivalent circuit models, the phenomenology associated to the effects of coupling is exactly the same, and the resonance frequencies are given by identical expressions. The reported lumped element circuit models of both structures are validated by comparing the circuit simulations with extracted parameters with both electromagnetic simulations and experimental data. These structures can be useful for the implementation of microwave sensors based on symmetry properties.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Modeling metamaterial transmission lines loaded with pairs of coupled split-ring resonators

  • Su, Lijuan|||0000-0002-4753-9340
  • Naqui Garolera, Jordi|||0000-0001-5660-1516
  • Mata Contreras, Francisco Javier|||0000-0001-6116-8681
  • Martín, Ferran|||0000-0002-1494-9167
A lumped-element equivalent circuit model of the unit cell of metamaterial transmission lines loaded with pairs of coupled split-ring resonators (SRRs) is presented. It is assumed that the dominant coupling mechanism between the SRRs forming the pair is magnetic, and that the distance between SRRs of adjacent cells is high enough to neglect such additional inter-resonator coupling. SRRs are oriented with their symmetry plane orthogonal to the line axis. Under these conditions, the line-to-SRR coupling is also magnetic, the electric coupling being negligible. The presented model accounts for the rupture of symmetry that can be caused, for instance, by asymmetric dielectric loading of the SRRs. Thus, the analysis is carried out on a general model where the SRRs of the pair have different inductance and capacitance. Then, different cases are studied, in particular a line with identical SRRs, and a line with different SRRs, but with the same resonance frequency. It is shown that coupling between SRRs tends to far or split the resonance frequencies of the loaded lines (transmission zeros), except for the symmetric case, where only one resonance (different to the one of uncoupled SRRs) appears. The model is validated by comparing circuit simulations using extracted parameters with electromagnetic simulations and experimental data.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Differential microstrip lines with common-mode suppression based on electromagnetic band-gaps (EBGs)

  • Vélez, Paris|||0000-0001-6502-5987
  • Bonache, Jordi|||0000-0002-7225-5737
  • Martín, Ferran|||0000-0002-1494-9167
A technique for the suppression of the common mode in differential (balanced) microstrip lines, based on electromagnetic band-gaps (EBGs), is presented in this letter. It is demonstrated that by periodically modulating the common-mode characteristic impedance of the line and simultaneously forcing the differential-mode impedance to be uniform (and equal to the reference impedance of the differential ports), the common mode can be efficiently suppressed over a certain frequency band, while the line is transparent for the differential-mode. The main advantage of EBGs, as compared to other approaches for common-mode suppression in differential microstrip lines, is the fact that the ground plane is kept unaltered. Moreover, the design of the differential line is straightforward since the required level of common-mode suppression and bandwidth are given by simple approximate analytical expressions. As a design example, we report a four-stage common-mode suppressed differential line with 68% fractional bandwidth for the common-mode stopband centered at 2.4 GHz, and maximum common-mode rejection ratio (CMRR) of 19 dB at that frequency. Furthermore, we have designed and fabricated a six-stage double-tuned common-mode suppressed differential line in order to enhance the stopband bandwidth for the common mode around 2.4 GHz.