Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Effects of inter-resonator coupling in split ring resonator loaded metamaterial transmission lines

  • Naqui Garolera, Jordi|||0000-0001-5660-1516
  • Fernández-Prieto, Armando|||0000-0002-1158-6049
  • Mesa Ledesma, Francisco
  • Medina, Francisco|||0000-0002-9947-506X
  • Martín, Ferran|||0000-0002-1494-9167
This paper investigates the effects of inter-resonator coupling in metamaterial transmission lines loaded with split ring resonators (SRRs). The study is performed from Bloch mode theory applied to the multiport equivalent circuit model of the unit cell of such artificial lines. From this analysis, it follows that the stopband bandwidth, inherent to SRR-loaded lines, is enhanced as inter-resonator coupling strengthens, and this enhancement is attributed to the presence of complex modes. The theoretical results are corroborated through calculation of the dispersion relation using a full-wave eigenmode solver, and also by measuring the frequency response of SRR-loaded lines with different inter-resonator distance and, hence, coupling.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Selective mode suppression in microstrip differential lines by means of electric-LC (ELC) and magnetic-LC (MLC) resonators

  • Naqui Garolera, Jordi|||0000-0001-5660-1516
  • Durán-Sindreu, Miguel|||0000-0002-1459-9857
  • Martín, Ferran|||0000-0002-1494-9167
In this paper, it is demonstrated that the so-called electric-LC (ELC) resonators, and their dual counterparts, the magnetic-LC (MLC) resonators, are useful for the selective suppression of either the differential or the common mode in microstrip differential lines. The key point to mode suppression is the alignment of the resonator with the electric (differential mode) or magnetic (common mode) wall of the line. It is shown that by simply rotating the resonators 90∘ we can selectively choose the suppressed mode in the vicinity of the resonator's fundamental resonance frequency. The theory is validated through full-wave electromagnetic simulation, the lumped element equivalent circuit models of the proposed structures and experimental data.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Two-dimensional alignment and displacement sensor based on movable broadside-coupled split ring resonators

  • Karami-Horestani, Ali|||0000-0002-7747-2554
  • Naqui Garolera, Jordi|||0000-0001-5660-1516
  • Shaterian, Zahra
  • Abbott, Derek|||0000-0002-0945-2674
  • Fumeaux, Cristophe
  • Martín, Ferran|||0000-0002-1494-9167
This paper proposes a two-dimensional alignment and displacement sensor based on movable broadside-coupled split ring resonators (BC-SRRs). As a basis for this sensor, a one-dimensional displacement sensor based on a microstrip line loaded with BC-SRRs is presented firstly. It is shown that compared to previously published displacement sensors, based on SRR-loaded coplanar waveguides, the proposed one-dimensional sensor benefits from a much wider dynamic range. Secondly, it is shown that with modifications in the geometry of the BC-SRRs, the proposed one-dimensional sensor can be modified and extended by adding a second element to create a high-dynamic range two-dimensional displacement sensor. Since the proposed sensors operate based on a split in the resonance frequency, rather than the resonance depth, they benefit from a high immunity to environmental noise. Furthermore, since the sensors' principle of operation is based on the deviation from symmetry, they are more robust to ambient conditions such as changes in the temperature, and thus they can be used as alignment sensors as well. A prototype of the proposed two-dimensional sensor is fabricated and the concept and simulation results are validated through experiment.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Common-mode suppressed differential bandpass filter based on open complementary split ring resonators fabricated in microstrip technology without ground plane etching

  • Vélez, Paris|||0000-0001-6502-5987
  • Durán-Sindreu, Miguel|||0000-0002-1459-9857
  • Naqui Garolera, Jordi|||0000-0001-5660-1516
  • Bonache, Jordi|||0000-0002-7225-5737
  • Martín, Ferran|||0000-0002-1494-9167
A differential (or balanced) bandpass filter based on open complementary split ring resonators (OCSRRs) coupled through admittance inverters is presented in this article. Pairs of OCSRRs are symmet- rically placed in a mirror configuration between the strips of the differential line and are modeled by means of two series connected parallel resonators. For the differential (odd) mode, there is a virtual ground at the connecting plane between the OCSRR pairs, and the structure is roughly described by the canonical model of a bandpass filter, consisting of a cascade of shunt resonators coupled through admittance inverters. It is demonstrated that, through a proper design of the OCSRR stages, the common mode noise in the vicinity of the differential filter pass band can be efficiently suppressed. Due to the differential mode operation of the filter, it is not necessary to incorporate metallic vias to ground the OCSRRs. Moreover, as compared to other differential filters based on OCSRRs, defected ground structures are not present in the proposed filters. To illustrate the potential of the approach, two balanced bandpass filters are designed, fabricated, and characterized.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Angular displacement and velocity sensors based on electric-LC (ELC) loaded microstrip lines

  • Naqui Garolera, Jordi|||0000-0001-5660-1516
  • Martín, Ferran|||0000-0002-1494-9167
Planar microwave angular displacement and angular velocity sensors implemented in microstrip technology are proposed. The transducer element is a circularly shaped divider/combiner, whereas the sensing element is an electricLC resonator, attached to the rotating object and magnetically coupled to the circular (active) region of the transducer. The angular variables are measured by inspection of the transmission characteristics, which are modulated by the magnetic coupling between the resonator and the divider/combiner. The degree of coupling is hence sensitive to the angular position of the resonator. As compared with coplanar waveguide angular displacement and velocity sensors, the proposed microstrip sensors do not require air bridges, and the ground plane provides backside isolation.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

S-shaped complementary split ring resonators and their application to compact differential bandpass filters with common-mode suppression

  • Karami-Horestani, Ali|||0000-0002-7747-2554
  • Durán-Sindreu, Miguel|||0000-0002-1459-9857
  • Naqui Garolera, Jordi|||0000-0001-5660-1516
  • Fumeaux, Cristophe
  • Martín, Ferran|||0000-0002-1494-9167
This letter presents an S-shaped complementary split ring resonator (S-CSRR) for application in compact differential filters. The working principle of the proposed S-CSRR is explained and a circuit model is developed and validated through electromagnetic simulations. It is shown that an S-CSRR-loaded differential microstrip line with series gaps can be used in the design of compact differential bandpass filters (BPFs) with common-mode suppression. The filter design procedure is explained and the theoretical concept is validated through fabrication and measurement of a compact (0.09 λg 0.25 λg) third-order differential BPF with common-mode suppression.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Mechanically reconfigurable microstrip lines loaded with stepped impedance resonators and potential applications

  • Naqui Garolera, Jordi|||0000-0001-5660-1516
  • Martín, Ferran|||0000-0002-1494-9167
This paper is focused on exploring the possibilities and potential applications of microstrip transmission lines loaded with stepped impedance resonators (SIRs) etched on top of the signal strip, in a separated substrate. It is shown that if the symmetry plane of the line (a magnetic wall) is perfectly aligned with the electric wall of the SIR at the fundamental resonance, the line is transparent. However, if symmetry is somehow ruptured, a notch in the transmission coefficient appears. The notch frequency and depth can thus be mechanically controlled, and this property can be of interest for the implementation of sensors and barcodes, as it is discussed.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Recent advances in the modeling of transmission lines loaded with split ring resonators (SRRs)

  • Naqui Garolera, Jordi|||0000-0001-5660-1516
  • Martín, Ferran|||0000-0002-1494-9167
  • Su, Lijuan|||0000-0002-4753-9340
  • Mata Contreras, Francisco Javier|||0000-0001-6116-8681
This paper reviews the recent advances in the modeling of transmission lines loaded with split ring resonators (SRRs). It is well known that these artificial lines can exhibit a negative effective permeability in a narrow band above the SRR fundamental resonance, providing stopband functionality. By introducing shunt inductive elements to the line, the stopband can be switched to a pass band with left-handed (LH) wave propagation. For the design of microwave circuits based on these artificial lines, accurate circuit models are necessary. The former circuit model of SRR-loaded lines was presented more than one decade ago and is valid under restrictive conditions. This paper presents the progress achieved in the modeling of these artificial lines during the last years. The analysis, restricted to coplanar waveguide (CPW) transmission lines loaded only with SRRs (negative permeability transmission lines), includes the effects of SRR orientation, the coupling between adjacent resonators, and the coupling between the two SRRs constituting the unit cell. The proposed circuit models are validated through electromagnetic simulation and experimental data. It is also pointed out that the analysis can be easily extended to negative permittivity transmission lines based on complementary split ring resonators (CSRRs).
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Ultra-compact (80 mm2) differential-mode ultra-wideband (UWB) bandpass filters with common-mode noise suppression

  • Vélez, Paris|||0000-0001-6502-5987
  • Naqui Garolera, Jordi|||0000-0001-5660-1516
  • Fernández-Prieto, Armando|||0000-0002-1158-6049
  • Bonache, Jordi|||0000-0002-7225-5737
  • Mata Contreras, Francisco Javier|||0000-0001-6116-8681
  • Martel, Jesús
  • Medina, Francisco|||0000-0002-9947-506X
  • Martín, Ferran|||0000-0002-1494-9167
This paper presents a novel approach for the implementation of balanced ultra-wideband (UWB) bandpass filters with common-mode noise suppression. To a first-order approximation, the differential-mode filter response is described by the canonical circuit model of a bandpass filter, i.e., a cascade of series-connected resonators alternating with shunt-connected parallel resonant tanks. Thus, the series branches of the balanced filter are implemented by means of inductive strips and patch capacitors, whereas the shunt sections are realized through mirrored stepped-impedance resonators (SIRs) and low-impedance (i.e., capacitive) short transmission-line sections. For the differential mode, the symmetry plane is a virtual ground, the wide strip sections of the SIRs are effectively grounded, and the SIRs behave as grounded inductors parallel connected to capacitors. However, for the common mode, where the symmetry plane is an open (magnetic wall), the SIRs act as shunt-connected series resonators, thus providing transmission zeros at their resonance frequencies. By properly tailoring the location of these transmission zeros, rejection of the common mode over the differential filter passband can be achieved. To illustrate the potential of the approach, an order-5 balanced bandpass filter covering the regulated band for UWB communications (3.1-10.6 GHz) is designed and fabricated. The filter exhibits common-mode rejection above 10 dB over the whole differential filter passband, with differential-mode insertion losses lower than 1.9 dB and return losses better than 10 dB. Since the proposed design approach is based on planar semi-lumped components, filter size is as small as 10.5 mm X 7.6 mm.
Dipòsit Digital de Documents de la UAB
Publicación Artículo de revisión (ReviewArticle)

Microwave sensors based on symmetry properties of resonator-loaded transmission lines

  • Naqui Garolera, Jordi|||0000-0001-5660-1516
  • Martín, Ferran|||0000-0002-1494-9167
This review paper is focused on the design of microwave sensors using symmetry properties of transmission lines loaded with symmetric resonators. The operating principle of these sensors is presented and then several prototype devices are reported, including linear and angular displacement sensors and rotation speed sensors. The main advantage of the proposed sensors is the robustness against changing environmental conditions.