Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

DAU Arxiu Digital de la Universitat Ramon Llull
Publicación Artículo científico (JournalArticle)

Solid-state electrochemical sensor for hydrogen isotopes. Part II: Dual-mode simultaneous quantification of H2 and D2 in gas mixtures

  • Lujan, Enric
  • Hinojo, Antonio
  • Verdaguer, Ariadna
  • Colominas, Sergi
  • Abella, Jordi
Achieving effective fusion energy generation on Earth necessitates precise quantification of deuterium and tritium fuel. This is critical in various stages of the reaction process in Tokamak-type reactors, such as ITER or EU-DEMO. Accurate, rapid, and reliable measurement of tritium in the Tritium Extraction System (TES) and determining the proportions of deuterium and tritium in the fuel cycle system are particularly important. However, due to the significant similarities between these isotopes, current measurement tools reported in bibliography face challenges in distinguishing them when mixed. Electrochemical sensors based on proton-conducting materials exhibit high sensitivity and can operate at temperatures up to 1000°C. These materials have shown proton, deuteron, and triton conductivity, making them suitable for hydrogen quantification under the conditions of the TES and fuel cycle systems. In the present work, it is proposed a combined potentiometric and amperometric sensor to be able to quantify hydrogen and deuterium simultaneously from a mixture of both. The device was tested at 500°C in mixed hydrogen and deuterium atmospheres, demonstrating the feasibility of simultaneous isotope quantification., info:eu-repo/semantics/publishedVersion
DAU Arxiu Digital de la Universitat Ramon Llull
Publicación Artículo científico (JournalArticle)

Li6La3Ta1.5Y0.5O12 solid-state lithium sensor for molten alloys

  • Hinojo, Antonio
  • Nel-lo, Marc
  • Colominas, Sergi
  • Abella, Jordi
Different breeding blankets are proposed for tritium generation in nuclear fusion reactors. Some of the proposed strategies are based on the molten eutectic alloy Lithium - Lead. Since lithium will be consumed, this alloy's physical and chemical properties will vary as its composition changes. For this reason, analytical tools able to perform real-time and in-situ lithium monitoring are of great interest. Electrochemical sensors, based on lithium conducting solid-state electrolytes, are good candidates to fulfil these requirements and withstand the harsh chemical environment of the molten alloy. In this work, the synthesis and sintering conditions of the solid-state electrolyte Li6La3Ta1.5Y0.5O12 were optimized to obtain high-crystalline electrolyte pellets. XRD was used to verify the garnet structure needed for Li conduction. The quality of the sintering was evaluated using SEM-EDS and its ionic conductivity was measured using Electrochemical Impedance Spectroscopy (EIS) in argon, at temperatures between 30 °C and 200 °C. Finally, a lithium sensor was constructed and used in molten alloys. The obtained results were in good agreement with potentials calculated using the Nernst equation., info:eu-repo/semantics/acceptedVersion
DAU Arxiu Digital de la Universitat Ramon Llull
Publicación Artículo científico (JournalArticle)

Garnet-type lithium sensors for the monitoring and control of Pb-Li alloys in tritium breeding modules

  • Nel-lo, Marc
  • Lujan, Enric
  • Hinojo, Antonio
  • Colominas, Sergi
  • Abella, Jordi
During the EU-DEMO conceptualization, eutectic Pb-Li was considered as the prime candidate liquid breeding material. Nonetheless, the conversion of lithium into tritium through the breeding reaction will result in a decrease in the lithium concentration within the alloy. Then, the monitoring of the lithium concentration in Pb-Li alloys is critical for the optimal Tritium Breeding Blanket (TBB) performance, as lithium affects dissolution of structural materials, tritium inventory and extraction rates. Garnet-like ceramics possess desirable properties for their use in lithium sensors, like high lithium-ion conductivity, good chemical stability, low thermal expansion coefficient, and great mechanical strength. For these reasons, electrochemical sensors based on garnet-type ceramics offer advantages for measuring lithium in molten Pb-Li alloys, such as high selectivity and fast response. This work presents the development of lithium sensors based on the garnet-type ceramic Li6BaLa2Ta2O12. The material was characterized by XRD and SEM, exhibiting good crystallinity and a homogeneous microstructure. The sensors were evaluated in a potentiometric configuration in molten Pb-Li alloys with lithium concentrations ranging from 3 to 35 at% Li. Potentiometric measurements were used to obtain correlations that allow the determination of the lithium activity in the lead–lithium alloys studied., info:eu-repo/semantics/publishedVersion
DAU Arxiu Digital de la Universitat Ramon Llull
Publicación Artículo científico (JournalArticle)

High temperature potentiometric hydrogen sensor based on BaCe0.6Zr0.3Y0.1O3-α-ZnO

  • Lujan, Enric
  • Hinojo, Antonio
  • Colominas, Sergi
  • Abella, Jordi
One of the alternatives to carbon-based fuels is hydrogen. Hydrogen isotopes are expected to be used as a fuel for nuclear fusion power. The measurement of these isotopes in high-temperature environments (>350 °C) is of great interest. Electrochemical sensors based on solid-state electrolytes have been proved to be able to operate at elevated temperatures, with great physical and chemical stabilities. In the present work, BaCe0.6Zr0.3Y0.1O3-α (BCZY) was used as a proton-conducting solid-state electrolyte. The synthesized powder was shaped into pellets at 1400 °C for 30 h and 1650 °C for 6 h and adding 5 mol% ZnO as sintering aid at mild sintering conditions (1400 °C for 12 h). Electrochemical sensors were constructed and tested using these pellet shaped electrolytes. The sensors were used in a potentiometric configuration at 400 °C, 500 °C and 600 °C. Hydrogen concentrations in the working electrode ranged from 0.02 to 0.5 mbar H2 in Ar. The use of ZnO as sintering aid helped in the obtention of full dense ceramics, preserving the perovskite structure of the electrolyte. Moreover, the addition of ZnO yielded a sensor that practically fulfilled the Nernst equation and able to perform hydrogen measurements with a high accuracy and precision., info:eu-repo/semantics/acceptedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Solid-state electrochemical sensor for hydrogen isotopes. Part II: Dual-mode simultaneous quantification of H2 and D2 in gas mixtures

  • Lujan, Enric
  • Hinojo, Antonio
  • Verdaguer, Ariadna
  • Colominas, Sergi
  • Abella, Jordi
Achieving effective fusion energy generation on Earth necessitates precise quantification of deuterium and tritium fuel. This is critical in various stages of the reaction process in Tokamak-type reactors, such as ITER or EU-DEMO. Accurate, rapid, and reliable measurement of tritium in the Tritium Extraction System (TES) and determining the proportions of deuterium and tritium in the fuel cycle system are particularly important. However, due to the significant similarities between these isotopes, current measurement tools reported in bibliography face challenges in distinguishing them when mixed. Electrochemical sensors based on proton-conducting materials exhibit high sensitivity and can operate at temperatures up to 1000°C. These materials have shown proton, deuteron, and triton conductivity, making them suitable for hydrogen quantification under the conditions of the TES and fuel cycle systems. In the present work, it is proposed a combined potentiometric and amperometric sensor to be able to quantify hydrogen and deuterium simultaneously from a mixture of both. The device was tested at 500°C in mixed hydrogen and deuterium atmospheres, demonstrating the feasibility of simultaneous isotope quantification., info:eu-repo/semantics/publishedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Li6La3Ta1.5Y0.5O12 solid-state lithium sensor for molten alloys

  • Hinojo, Antonio
  • Nel-lo, Marc
  • Colominas, Sergi
  • Abella, Jordi
Different breeding blankets are proposed for tritium generation in nuclear fusion reactors. Some of the proposed strategies are based on the molten eutectic alloy Lithium - Lead. Since lithium will be consumed, this alloy's physical and chemical properties will vary as its composition changes. For this reason, analytical tools able to perform real-time and in-situ lithium monitoring are of great interest. Electrochemical sensors, based on lithium conducting solid-state electrolytes, are good candidates to fulfil these requirements and withstand the harsh chemical environment of the molten alloy. In this work, the synthesis and sintering conditions of the solid-state electrolyte Li6La3Ta1.5Y0.5O12 were optimized to obtain high-crystalline electrolyte pellets. XRD was used to verify the garnet structure needed for Li conduction. The quality of the sintering was evaluated using SEM-EDS and its ionic conductivity was measured using Electrochemical Impedance Spectroscopy (EIS) in argon, at temperatures between 30 °C and 200 °C. Finally, a lithium sensor was constructed and used in molten alloys. The obtained results were in good agreement with potentials calculated using the Nernst equation., info:eu-repo/semantics/acceptedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Garnet-type lithium sensors for the monitoring and control of Pb-Li alloys in tritium breeding modules

  • Nel-lo, Marc
  • Lujan, Enric
  • Hinojo, Antonio
  • Colominas, Sergi
  • Abella, Jordi
During the EU-DEMO conceptualization, eutectic Pb-Li was considered as the prime candidate liquid breeding material. Nonetheless, the conversion of lithium into tritium through the breeding reaction will result in a decrease in the lithium concentration within the alloy. Then, the monitoring of the lithium concentration in Pb-Li alloys is critical for the optimal Tritium Breeding Blanket (TBB) performance, as lithium affects dissolution of structural materials, tritium inventory and extraction rates. Garnet-like ceramics possess desirable properties for their use in lithium sensors, like high lithium-ion conductivity, good chemical stability, low thermal expansion coefficient, and great mechanical strength. For these reasons, electrochemical sensors based on garnet-type ceramics offer advantages for measuring lithium in molten Pb-Li alloys, such as high selectivity and fast response. This work presents the development of lithium sensors based on the garnet-type ceramic Li6BaLa2Ta2O12. The material was characterized by XRD and SEM, exhibiting good crystallinity and a homogeneous microstructure. The sensors were evaluated in a potentiometric configuration in molten Pb-Li alloys with lithium concentrations ranging from 3 to 35 at% Li. Potentiometric measurements were used to obtain correlations that allow the determination of the lithium activity in the lead–lithium alloys studied., info:eu-repo/semantics/publishedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

High temperature potentiometric hydrogen sensor based on BaCe0.6Zr0.3Y0.1O3-α-ZnO

  • Lujan, Enric
  • Hinojo, Antonio
  • Colominas, Sergi
  • Abella, Jordi
One of the alternatives to carbon-based fuels is hydrogen. Hydrogen isotopes are expected to be used as a fuel for nuclear fusion power. The measurement of these isotopes in high-temperature environments (>350 °C) is of great interest. Electrochemical sensors based on solid-state electrolytes have been proved to be able to operate at elevated temperatures, with great physical and chemical stabilities. In the present work, BaCe0.6Zr0.3Y0.1O3-α (BCZY) was used as a proton-conducting solid-state electrolyte. The synthesized powder was shaped into pellets at 1400 °C for 30 h and 1650 °C for 6 h and adding 5 mol% ZnO as sintering aid at mild sintering conditions (1400 °C for 12 h). Electrochemical sensors were constructed and tested using these pellet shaped electrolytes. The sensors were used in a potentiometric configuration at 400 °C, 500 °C and 600 °C. Hydrogen concentrations in the working electrode ranged from 0.02 to 0.5 mbar H2 in Ar. The use of ZnO as sintering aid helped in the obtention of full dense ceramics, preserving the perovskite structure of the electrolyte. Moreover, the addition of ZnO yielded a sensor that practically fulfilled the Nernst equation and able to perform hydrogen measurements with a high accuracy and precision., info:eu-repo/semantics/acceptedVersion