Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 30
Encontrada(s) 1 página(s)

DAU Arxiu Digital de la Universitat Ramon Llull
Publicación Artículo científico (JournalArticle)

Thermodynamic Characterization of Gas Mixtures for Non-Thermal Plasma CO2 Conversion Applications with Soft-SAFT

  • Mas Peiro, Cristina
  • Quinteros-Lama, Héctor
  • Pou, Josep Oriol
  • Llovell Ferret, Félix Lluís
Carbon dioxide (CO2) transformation into added-value products through non-thermal plasma (NTP) represents a novel technology of interest. The process involves, apart from CO2, mixtures of different gases such as carbon monoxide (CO), oxygen (O2), nitrogen (N2), argon (Ar), and hydrogen (H2) for subsequent CO2 methanation. In this work, a preliminary study of the thermodynamic representation of the mixtures relevant in the context of carbon capture, utilization, and storage (CCUS) processes, but focused on the NTP conversion, is presented. The thermodynamic characterization is achieved through the application of the polar soft-statistical associating fluid theory (SAFT) equation of state (EoS), which allows molecular parameterization of pure compounds and the description of mixtures at different conditions of temperature and pressure. An accurate parametrization of all gases is carried out by explicitly considering the quadrupolar nature of CO2, CO, and N2. The characterization is then used to describe several single-phase densities, derivative properties, second virial coefficients, and the vapor–liquid equilibrium (VLE) of CO2 binary mixtures with Ar, O2, CO, N2, and H2, as well as combinations between some of these gases. A parametric analysis of the impact of the binary parameters on the equilibria description is carried out to assess the temperature dependency. The results have overall shown good agreement to experimental data in most conditions using one or two binary parameters. Finally, ternary systems involving CO2, O2, Ar, and N2 have been predicted in good agreement with the experimental data, demonstrating the capacity of the model to evaluate the behavior of multicomponent gas mixtures., info:eu-repo/semantics/publishedVersion
DAU Arxiu Digital de la Universitat Ramon Llull
Publicación Artículo científico (JournalArticle)

Non-target metabolomic approach of the toxic effects of glyphosate in zebrafish (D. rerio)

  • Marí­n-Garcí­a, Marc
  • Bellot, Marina
  • Mandal, Rupasri
  • Wishart, David S
  • Tauler, Romà
  • Raldua, Demetrio
  • Barata, Carlos
  • Gomez, Cristian
Glyphosate (GLY) is the most widely used herbicide globally and is frequently detected in aquatic environments at low concentrations, raising concerns about its potential long-term effects on non-target organisms. However, the systemic metabolic disruptions of chronic GLY exposure in aquatic vertebrates remain poorly understood, especially at environmentally relevant concentrations. This study investigates the metabolic disruptions of GLY exposure in zebrafish (D. rerio) using a non-targeted metabolomic approach. Brain, gut, and fecal samples were analyzed after two weeks of exposure to environmentally relevant concentrations (0.3 and 3 μg L−1). Metabolic profiling was performed using LC-HRMS data processed via the Regions of Interest Multivariate Curve Resolution (ROIMCR) method, resolving up to 70 components per tissue and capturing >99 % of the experimental variance. Direct MSident annotation revealed diverse biomolecules, including amino acids, sugars, nucleotides, and organic acids. Tentative identification yielded 92, 182, and 117 metabolites in the brain, gut, and feces, respectively, further confirmed by the KEGG database. Statistical analysis revealed significant metabolic differences between control and GLY-treated groups, particularly at higher concentrations. Significantly altered metabolites were observed in the brain (37), gut (75), and feces (31), respectively. Fifteen overlapping metabolites between the studied brain and gut tissues suggest a GLY-induced gut-brain axis disruption. Functional enrichment analysis showed down-regulation of pathways related to amino acid, lipid, and energy metabolism, especially in gut and brain tissues, while fecal metabolites were generally up-regulated. These results demonstrate that GLY exposure induces tissue-specific and systemic metabolic disturbances in zebrafish, potentially linked to oxidative stress and neurotoxicity, with implications for aquatic health and environmental risk assessment., info:eu-repo/semantics/acceptedVersion
DAU Arxiu Digital de la Universitat Ramon Llull
Publicación Artículo científico (JournalArticle)

Thermophysical Characterization of Sustainable Pathways for Hydrofluorocarbons Separation Utilizing Deep Eutectic Solvents

  • Alencar, L.V.T.D.
  • González Barramuño, Bastián
  • Rodriguez Reartes, S.B.
  • Quinteros-Lama, Héctor
  • Garrido, J.M.
  • Codera, Victoria
  • Pou, Josep Oriol
  • Tavares, Frederico
  • González Olmos, Rafael
  • Llovell Ferret, Félix Lluís
The widespread use of hydrofluorocarbons (HFCs) in refrigeration ushered in a significant environmental challenge due to their high global warming potential. Effective recovery and separation techniques are imperative to mitigate their adverse impacts and promote sustainability. This study investigates the solubility behavior of four common HFCs (R-125, R-134a, R-32, and R143a) using choline chloride ([Ch]Cl) and tetramethylammonium chloride (TMAC) based Deep Eutectic Solvents (DESs) as ecofriendly, low-toxicity and low-cost alternatives, provided the promising selectivity exhibited by some of them in separating HFC mixtures. The new experimental data are completed by a comprehensive thermodynamic characterization employing the soft-SAFT equation. This modeling enables the description of the density and viscosity of pure DESs, enthalpy and entropy of dissolution, Henry’s constants, and ideal selectivity. From these results, the competitive selectivity among gases in multi-component blends and DESs is predicted. R-32 appears to have the highest affinity in DESs, followed by R-134a, R-143a, and R-125, while TMAC:EG (1:3) shows the highest absorption capacity for all HFCs. Despite relatively low absorption rates, DESs containing TMAC:GL (1:3) and [Ch]Cl:GL (1:3) + 10 wt% exhibit promising selectivity for separating HFCs mixtures, especially those containing R-32, which holds significance for applications in recovering commercial blends like R410A and R407F., info:eu-repo/semantics/publishedVersion
DAU Arxiu Digital de la Universitat Ramon Llull
Publicación Artículo científico (JournalArticle)

Advancing electrified CO2 capture: Material design strategies for magnetic adsorption composites

  • Stratil, Oliver
  • Cespedes, Oscar
  • Croquet, Olivier
  • Visart de Bocarmé, Thierry
  • González Olmos, Rafael
  • FERNANDEZ, JAVIER
This study investigates the design and performance of magnetic adsorption composites (MACs) for application in electrified CO2 capture with temperature swing adsorption from point sources. The MACs were composed of Fe3O4 as magnetic component to act as inductive heating source and zeolite 13× as a CO2 adsorbent. Three MAC configurations were prepared and evaluated under temperature feedback-loop control at different desorption temperatures ranging between 100−150°C: Homogeneous mixture of Fe3O4 and zeolite 13×, a core-shell structure with magnetic Fe3O4 core and zeolite 13× shell, and a mixed bed configuration containing separate heating and adsorbent beads. Resistive wall heated and room-temperature desorption experiments were conducted as references. In average, the heating experiments reached a steady-state effective working capacity after around 20 adsorption-desorption cycles. The homogenous mixture exhibited the most favorable performance, combining fast heating response, stable temperature control, and high CO2 desorption efficiency. When reaching steady state, it achieved 99% desorption within 94s and the highest productivity of 0.52 mgCO2 / gMAC*S with a theoretical regeneration energy of 3.0 MJ/kgCO2 [Formula presented]. The core-shell structure showed limited temperature control due to low heat transfer through the shell, while the mixed bed configuration achieved moderate performance. Compared with column wall heating, inductive heating improved thermal efficiency by delivering heat directly to the adsorbent region. However, efficient coupling of the magnetic field to the magnetic material remains the key challenge for energy efficient induction heated TSA., info:eu-repo/semantics/publishedVersion
DAU Arxiu Digital de la Universitat Ramon Llull
Publicación Artículo científico (JournalArticle)

Combining molecular modelling approaches for a holistic thermophysical characterisation of fluorinated refrigerant blends

  • Jovell, Daniel
  • Alonso, Gerard
  • Gamallo, Pablo
  • González Olmos, Rafael
  • Quinteros-Lama, Héctor
  • Llovell, Felix
After Montreal Protocol, hydrofluorocarbons (HFCs) appeared to be a permanent solution for replacing previous ozone-depleting substances. However, their utilisation has now progressively decreased following the Kigali Amendment application in 2016 due to their high global warming potential (GWP). Unsaturated HFCs, such as hydrofluoroolefins (HFOs), are considered feasible alternatives due to their high reaction rates and low atmospheric lifetimes, resulting in very low GWP. However, available data on their physicochemical behaviour still needs to be improved, even with the recent increase in the amount of new experimental data for these systems. In this direction, computational tools provide a quick pathway to screen their properties and complete the information obtained from experimental work. In this contribution, two different molecular modelling tools, molecular dynamics (MD) simulations and the soft-SAFT equation of state (EOS), are combined to compute the coexistence densities, vapour pressure, heat capacity, interfacial tension, and dynamic viscosity of several refrigerant blends based on 3rd and 4th generation compounds, in order to provide a thermodynamic analysis of the properties of these mixtures, addressing them for drop-in replacement purposes. Results from MD are compared with REFPROP data and those from soft-SAFT, where the capacities of both modelling methods are addressed. In general, quantitative agreement is achieved using the two approaches, offering a framework to screen these properties for new mixtures., info:eu-repo/semantics/publishedVersion
DAU Arxiu Digital de la Universitat Ramon Llull
Publicación Artículo científico (JournalArticle)

A Tribute to Ullmann’s Work: Expanding Copper Coil Reactor Applications toward the Hydroxylation of Aryl Bromides

  • Molins Colomer, Maite
  • FERNANDEZ, JAVIER
  • Berzosa, Xavier
Copper coil flow reactors represent an economic, abundant, and durable platform for conducting copper-catalyzed reactions. These have been used in the past for Ullmann-type reactions starting from aryl iodides. However, no procedures have been described for the activation of less reactive aryl bromides. In this work, we successfully developed a method for the hydroxylation of aryl bromides promoted by a copper coil reactor. Notably, the presence of both a diamine ligand and DMF is key for the reaction to proceed. An inorganic base such as Na2CO3 also improved the reaction yield by minimizing the formation of side products. The setup has been applied to a range of disubstituted aryl bromides in moderate to good yields and was tested under 24 h of continuous operation, showing stable yields, thus proving the robustness of the catalysis. Finally, the lifetime of a copper reactor operating under the described conditions has been calculated for the first time, proving that this technology is safe to operate at an industrial scale., info:eu-repo/semantics/publishedVersion
DAU Arxiu Digital de la Universitat Ramon Llull
Publicación Artículo científico (JournalArticle)

Bayesian Optimization of a Suzuki Coupling for the Industrial Synthesis of a Sartan Drug Intermediate

  • Molins Colomer, Maite
  • FERNANDEZ, JAVIER
  • Vázquez Vázquez, Daniel
  • Berzosa, Xavier
Sartans are an important family of drugs used to treat hypertension. A common characteristic of most of them is a biphenyl moiety, commonly obtained through a Suzuki-Miyaura cross-coupling reaction, of which thousands of tons are produced every year. Bayesian Optimization (BO), a machine-learning technique to find the optimum of complex unknown functions with a minimum number of test points, has been applied to optimize the reaction conditions in continuous flow with a focus on lowering the costs and increasing both the productivity and the sustainability of the process, as evaluated through its Process Mass Intensity (PMI). Although this is a common chemical transformation, the fact that it happens in a biphasic medium with organometallic catalysis makes its optimization more challenging. Six variables were identified as important for the reaction system: residence time, temperature, equivalents of the nonlimiting reactant, mol % of catalyst, mol % of ligand, and solvent volumes. With less than 40 experiments, the BO algorithm achieved solutions that increased the productivity up to 4 times compared to the initial results of the DOE experiments and reduced the cost by around 30%. A Pareto front with different optimal solutions was provided at the end of the optimization, and the point with the lowest cost and the lowest PMI was scaled up to increase productivity while keeping the unitary cost unchanged., info:eu-repo/semantics/publishedVersion
DAU Arxiu Digital de la Universitat Ramon Llull
Publicación Artículo científico (JournalArticle)

Direct UV photolysis of cloperastine in aqueous solution: Kinetic model and degradation pathway

  • Marí­n-Garcí­a, Marc
  • González Olmos, Rafael
  • Gómez-Canela, Cristian
The increasing production and release of synthetic organic chemicals, including pharmaceuticals, into our environment has allowed these substances to accumulate in our surface water systems. Current purification technologies have been unable to eliminate these pollutants, resulting in their ongoing release into aquatic ecosystems. This study focuses on cloperastine (CPS), a cough suppressant and antihistamine medication. The environmental impact of CPS usage has become a concern, mainly due to its increased detection during the COVID-19 pandemic. CPS has been found in wastewater treatment facilities, effluents from senior living residences, river waters, and sewage sludge. However, the photosensitivity of CPS and its photodegradation profile remain largely unknown. This study investigates the photodegradation process of CPS under simulated tertiary treatment conditions using UV photolysis, a method commonly applied in some wastewater treatment plants. Several transformation products were identified, evaluating their kinetic profiles using chemometric approaches (i.e., curve fitting and the hard-soft multivariate curve resolution-alternating least squares (HS-MCR-ALS) algorithm) and calculating the reaction quantum yield. As a result, three different transformation products have been detected and correctly identified. In addition, a comprehensive description of the kinetic pathway involved in the photodegradation process of the CPS drug has been provided, including observed kinetic rate constants., info:eu-repo/semantics/acceptedVersion
DAU Arxiu Digital de la Universitat Ramon Llull
Publicación Artículo científico (JournalArticle)

Integration of adsorption-based carbon capture with alkaline wastewater neutralization: Pilot-scale techno-economic and environmental assessment

  • García-Atencia, M.
  • Pujol, J.
  • FERNANDEZ, JAVIER
  • González Olmos, Rafael
The integration of carbon capture and utilization (CCU) technologies into industrial processes opens new pathways to mitigate climate change while aligning with the principles of the circular economy. This study evaluates the technical, environmental and economic performance of using CO2 captured via vacuum swing adsorption (VSA) for the on-site neutralization of alkaline wastewater generated in a food processing facility. The pilot-scale VSA unit of this study treated flue gas from a natural gas-fired boiler, producing 79 tons of CO2 per year with 76% (w/w) of CO2 purity, 67% of CO2 recovery and specific energy demand of 0.61 kWh/kgCO2, including energy for final CO2 compression. The captured CO2 was successfully used to neutralize the alkaline wastewater. A life cycle assessment (LCA) was carried out to compare three neutralization scenarios: (i) conventional treatment with sulfuric acid (H2SO4), (ii) the use of commercial CO2, and (iii) a circular scenario with the on-site reuse of the CO2 captured through VSA. The LCA results indicate that the circular scenario reduces the climate change impact by 65% and 48% compared to the commercial CO2 and H2SO4 scenarios, respectively. The environmental impact in the circular scenario is at least 78% lower than the worst-case scenario across nearly all impact categories. From an economic perspective, the circular scenario achieved similar costs to using H2SO4 while offering a 40% cost reduction compared to commercial CO2. These findings demonstrate that on-site CCU for alkaline wastewater treatment is technically feasible at pilot scale and a more sustainable alternative., info:eu-repo/semantics/publishedVersion
DAU Arxiu Digital de la Universitat Ramon Llull
Publicación Artículo científico (JournalArticle)

Electrifying CO2 temperature swing adsorption: A comparative review of resistive, induction, and microwave heating from material properties to process performance

  • Stratil, Oliver
  • Gonzalez Olmos, Rafael
  • FERNANDEZ, JAVIER
Electrified temperature swing adsorption (eTSA) has emerged as a promising approach for intensified post-combustion CO2 capture by enabling direct heat generation within the adsorption bed and thereby reducing the thermal limitations associated with conventional externally heated TSA systems. This review systematically compares the three main electrified heating approaches currently investigated for post-combustion CO2 capture: Resistive heating (RH), Induction heating (IH), and Microwave heating (MWH). To improve comparability across the fragmented and predominantly laboratory-scale eTSA literature, publications of comparable boundary conditions were analyzed using homogeneous evaluation criteria including working capacity, CO2/N2 selectivity, heating rate, temperature homogeneity, regeneration energy and electrical and thermal energy efficiencies. Among the reviewed adsorbents, physisorbents dominated the current eTSA literature, particularly metal-organic frameworks (MOFs), zeolites, and activated carbons (ACs). Mg-MOF-74 and Mg-Gallate exhibited the highest working capacities, followed by the zeolites 13X and NaUSY, while AC offers direct applicability for RH and MWH because of its conductive and microwave-responsive properties. However, humidity sensitivity remains a major limitation for high adsorption capacity physisorbents. All reviewed electrified heating approaches achieved substantially higher heating rates than conventional conductive wall heating or hot gas purge systems. RH has a potentially very high overall energy efficiency, although homogeneous current distribution remains challenging. IH provides high flexibility in adsorbent selection through magnetic heating additives and offers strong potential for homogeneous internal heating, while efficient magnetic field coupling remains the key challenge for energy-efficient operation. MWH enables extremely rapid heating without necessarily requiring additional heating materials but faces challenges regarding temperature homogeneity and electric-to-thermal energy efficiency. Overall, all electrified approaches still face important scale-up challenges regarding heat and field distribution, and electrical-to-thermal energy efficiency. This review highlights the strong potential of eTSA for flexible and intensified CO2 capture while identifying humidity-tolerant adsorbents, cyclic stability, heat-management optimization, and realistic process-scale evaluation as key priorities for future research and industrial implementation., info:eu-repo/semantics/publishedVersion
DAU Arxiu Digital de la Universitat Ramon Llull
Publicación Artículo científico (JournalArticle)

Non-thermal plasma CO2 conversion enhanced by CeO2-doped BaTiO3 and internal electrode cooling

  • Stratil, Oliver
  • Pou, Josep Oriol
  • Abad, Manuel David
  • González Olmos, Rafael
  • FERNANDEZ, JAVIER
This work investigates the combined impact of using cerium oxide (CeO2) as a catalyst and internal electrode cooling on CO2 conversion into CO in a non-thermal plasma reactor packed with barium titanate (BaTiO3). BaTiO3 is successfully modified with CeO2 via a wetness impregnation method, yielding samples with 0%, 3%, 17%, and 57% CeO2 loadings. It is observed that a low CeO2 loading of 3% increased the CO2 conversion and energy efficiency by up to 38% compared to the undoped BaTiO3, while higher loadings (17% and 57%) led to reduced performance. The use of a cooling strategy through the inner electrode, using air convection (passive cooling) or water flow (active cooling), increases both CO2 conversion and energy efficiency by strengthening plasma generation and reducing the recombination of CO and O2. Specifically, conversion increases from 18% without cooling to 36% with passive cooling, and further to 47% when combined with 3% CeO2 doping and active water cooling. In parallel, the energy efficiency increases from 0.3 - 2% (undoped, uncooled) to 0.5 - 16% with 3% CeO2 doping under both passive and active internal cooling., info:eu-repo/semantics/publishedVersion
DAU Arxiu Digital de la Universitat Ramon Llull
Publicación Artículo científico (JournalArticle)

Absolute environmental sustainability assessment of emerging working fluids in organic rankine cycles

  • Shirmohammadi, Reza
  • González Olmos, Rafael
  • Calvo Serrano, Raul
  • Llovell, Felix
  • González Olmos, Rafael
New working fluids (WFs) have been recently proposed to enhance the environmental performance of Organic Rankine Cycles (ORCs) in waste heat recovery systems. However, a critical gap remains in the comprehensive evaluation of their environmental impacts, particularly those associated with the production of these compounds and their use in ORC systems. This study performs a comprehensive absolute environmental sustainability assessment (AESA) to evaluate the environmental trade-offs of replacing traditional WFs, such as R245fa, with emerging alternatives in ORC systems. An innovative methodology, integrating process simulation, life cycle assessment (LCA), prospective analysis, and the planetary boundaries (PBs) framework, is employed to provide a holistic sustainability assessment. The results show that using emerging WFs reduces 85% of the carbon footprint of ORCs. Although this transition shifts environmental burdens to the ozone depletion impact category, the system remains within the PBs’ safe operating space. The burden of the other environmental impact categories studied is reduced by more than 15%. The prospective analysis highlights that the transition from current to alternative WFs for ORC systems could cut around 237 million tons of annual CO2 emissions by 2050., info:eu-repo/semantics/acceptedVersion
DAU Arxiu Digital de la Universitat Ramon Llull
Publicación Artículo científico (JournalArticle)

Copper Coils as Efficient and Inexpensive Reactors for the Synthesis of Tetrazoles in Flow Chemistry

  • Molins Colomer, Maite
  • Roig, Natàlia
  • FERNANDEZ, JAVIER
  • Berzosa, Xavier
Sartans are an important family of drugs used to treat hypertension. A common characteristic of most of them is a biphenyl moiety with a tetrazole ring in the ortho position of the phenyl–phenyl bond. This tetrazole is typically synthesized from the respective nitriles through a [3 + 2] azide-nitrile cycloaddition. However, the use of large amounts of azides at high temperatures for extended periods of time is inherently concerning, as serious accidents can occur if safety protocols are not thoroughly developed and implemented. The implementation of these procedures in continuous flow would therefore be beneficial from the safety perspective. In this article, a method is presented for the preparation of tetrazoles from the respective nitriles employing a copper coil as reactor and catalyst. The reaction parameters have been studied and optimized to maximize conversion. A variety of benzonitriles with different ring substituents have been transformed in moderate to good yields and copper leaching has been analyzed, showing that the copper leached is enough to catalyze this reaction. More interestingly, the method has been applied to obtain the tetrazole ring present in a key intermediate used in sartan manufacturing, a highly sterically hindered compound., info:eu-repo/semantics/acceptedVersion
DAU Arxiu Digital de la Universitat Ramon Llull
Publicación Artículo científico (JournalArticle)

Accumulation and dietary risks of perfluoroalkyl substances in fish and shellfish: A market-based study in Barcelona

  • Marí­n-Garcí­a, Marc
  • Fàbregas, Céline
  • Argenté, Carla
  • Diaz-Ferrero, Jordi
  • Gómez-Canela, Cristian
Since the 1940s, per- and polyfluoroalkyl substances (PFAS) have been widely produced and used in various applications due to their unique properties. Consequently, the principal exposure routes of PFAS have been broadly studied, leading to the conclusion that dietary exposure (more specifically, the consumption of fish and seafood) was one of their main contributors. Thus, developing an analytical method that determines the level of PFAS in fish and seafood has become a relevant subject. In this work, a previous analytical method has been optimized to determine 12 PFAS in fish muscle from salmon, tuna, cod, hake, sardine, anchovy, and sole, as well as in seven different seafood species (i.e., cuttlefish, octopus, squid, shrimp, Norway lobster, prawn, and mussel) by liquid chromatography coupled to tandem mass spectrometry (LC-MS/MS). Subsequently, the PFAS profile of the different species was studied to determine if it was consistent with that previously reviewed in the literature and to know the most relevant contribution of PFAS for each species. Finally, human exposure to PFAS through their consumption was estimated by the daily intake for seven different age/gender groups. PFAS were obtained from 0.014 to 0.818 ng g−1 wet weight in fish samples. Sardines, anchovies, and soles presented the highest PFAS levels. However, cod samples also showed some PFAS traces. Regarding seafood, PFAS levels range from 0.03 to 36.7 ng g−1 dry weight for the studied species. A higher concentration of PFAS has been found in the cephalopods' spleens and the crustaceans' heads. PFOS and PFBS were the predominant compounds in each seafood species, respectively. On the other hand, in the case of mussels, which are the less polluted species of the study, contamination by longer-chained PFAS was also observed. Finally, the total intake of PFAS due to fish and shellfish consumption for the Spanish adult population was estimated at 17.82 ng day−1. Nevertheless, none of the analyzed samples exceeded the European Food Safety Authority (EFSA) risk value for the supervised PFAS in any age/gender group reviewed., info:eu-repo/semantics/acceptedVersion
DAU Arxiu Digital de la Universitat Ramon Llull
Publicación Artículo científico (JournalArticle)

Computational Fluid Dynamic study of gas mixtures in a Non-Thermal Plasma reactor for CO2 conversion with Argon as diluent gas

  • Mas-Peiro, Cristina
  • Llovell, Felix
  • Llovell, Felix
CO2 utilization has been an emerging technology of increasing global interest due to its direct impact in limiting greenhouse gas emissions. In this contribution, the fluid dynamic behavior of a CO2 conversion non-thermal plasma (NTP) in a dielectric barrier discharge (DBD) reactor is studied through computational fluid dynamics (CFD) simulations.Calculations are provided in conjunction with experi-mental results and the thermodynamic characteriza-tion of the compounds and mixtures involved. This CFD study utilizes a well-established methodology that allows the optimization of fluid flow with limited computational burden.Firstly, results are presented for an Example Case, in which several variables are studied both at the final iteration as well as across iterations. Secondly, a range of Study Cases, changing the inlet composition and volume rate, are presented. Average velocity is one of the most significant variables to predict the reactor’s yield, while the temperature, density and pressure in the reactor remain, in most cases, almost constant.The resulting CFD computations describe the behavior of the fluids in the reactor in a predictive manner for future experimental results. Limitations in the fluid’s characterization occur due to not explicitly including the plasma reaction, which will be aimed at in future contributions., info:eu-repo/semantics/publishedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Accumulation and dietary risks of perfluoroalkyl substances in fish and shellfish: A market-based study in Barcelona

  • Marí­n-Garcí­a, Marc
  • Fàbregas, Céline
  • Argenté, Carla
  • Diaz-Ferrero, Jordi
  • Gómez-Canela, Cristian
Since the 1940s, per- and polyfluoroalkyl substances (PFAS) have been widely produced and used in various applications due to their unique properties. Consequently, the principal exposure routes of PFAS have been broadly studied, leading to the conclusion that dietary exposure (more specifically, the consumption of fish and seafood) was one of their main contributors. Thus, developing an analytical method that determines the level of PFAS in fish and seafood has become a relevant subject. In this work, a previous analytical method has been optimized to determine 12 PFAS in fish muscle from salmon, tuna, cod, hake, sardine, anchovy, and sole, as well as in seven different seafood species (i.e., cuttlefish, octopus, squid, shrimp, Norway lobster, prawn, and mussel) by liquid chromatography coupled to tandem mass spectrometry (LC-MS/MS). Subsequently, the PFAS profile of the different species was studied to determine if it was consistent with that previously reviewed in the literature and to know the most relevant contribution of PFAS for each species. Finally, human exposure to PFAS through their consumption was estimated by the daily intake for seven different age/gender groups. PFAS were obtained from 0.014 to 0.818 ng g−1 wet weight in fish samples. Sardines, anchovies, and soles presented the highest PFAS levels. However, cod samples also showed some PFAS traces. Regarding seafood, PFAS levels range from 0.03 to 36.7 ng g−1 dry weight for the studied species. A higher concentration of PFAS has been found in the cephalopods' spleens and the crustaceans' heads. PFOS and PFBS were the predominant compounds in each seafood species, respectively. On the other hand, in the case of mussels, which are the less polluted species of the study, contamination by longer-chained PFAS was also observed. Finally, the total intake of PFAS due to fish and shellfish consumption for the Spanish adult population was estimated at 17.82 ng day−1. Nevertheless, none of the analyzed samples exceeded the European Food Safety Authority (EFSA) risk value for the supervised PFAS in any age/gender group reviewed., info:eu-repo/semantics/acceptedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Computational Fluid Dynamic study of gas mixtures in a Non-Thermal Plasma reactor for CO2 conversion with Argon as diluent gas

  • Mas-Peiro, Cristina
  • Llovell, Felix
  • Llovell, Felix
CO2 utilization has been an emerging technology of increasing global interest due to its direct impact in limiting greenhouse gas emissions. In this contribution, the fluid dynamic behavior of a CO2 conversion non-thermal plasma (NTP) in a dielectric barrier discharge (DBD) reactor is studied through computational fluid dynamics (CFD) simulations.Calculations are provided in conjunction with experi-mental results and the thermodynamic characteriza-tion of the compounds and mixtures involved. This CFD study utilizes a well-established methodology that allows the optimization of fluid flow with limited computational burden.Firstly, results are presented for an Example Case, in which several variables are studied both at the final iteration as well as across iterations. Secondly, a range of Study Cases, changing the inlet composition and volume rate, are presented. Average velocity is one of the most significant variables to predict the reactor’s yield, while the temperature, density and pressure in the reactor remain, in most cases, almost constant.The resulting CFD computations describe the behavior of the fluids in the reactor in a predictive manner for future experimental results. Limitations in the fluid’s characterization occur due to not explicitly including the plasma reaction, which will be aimed at in future contributions., info:eu-repo/semantics/publishedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Thermodynamic Characterization of Gas Mixtures for Non-Thermal Plasma CO2 Conversion Applications with Soft-SAFT

  • Mas Peiro, Cristina
  • Quinteros-Lama, Héctor
  • Pou, Josep Oriol
  • Llovell Ferret, Félix Lluís
Carbon dioxide (CO2) transformation into added-value products through non-thermal plasma (NTP) represents a novel technology of interest. The process involves, apart from CO2, mixtures of different gases such as carbon monoxide (CO), oxygen (O2), nitrogen (N2), argon (Ar), and hydrogen (H2) for subsequent CO2 methanation. In this work, a preliminary study of the thermodynamic representation of the mixtures relevant in the context of carbon capture, utilization, and storage (CCUS) processes, but focused on the NTP conversion, is presented. The thermodynamic characterization is achieved through the application of the polar soft-statistical associating fluid theory (SAFT) equation of state (EoS), which allows molecular parameterization of pure compounds and the description of mixtures at different conditions of temperature and pressure. An accurate parametrization of all gases is carried out by explicitly considering the quadrupolar nature of CO2, CO, and N2. The characterization is then used to describe several single-phase densities, derivative properties, second virial coefficients, and the vapor–liquid equilibrium (VLE) of CO2 binary mixtures with Ar, O2, CO, N2, and H2, as well as combinations between some of these gases. A parametric analysis of the impact of the binary parameters on the equilibria description is carried out to assess the temperature dependency. The results have overall shown good agreement to experimental data in most conditions using one or two binary parameters. Finally, ternary systems involving CO2, O2, Ar, and N2 have been predicted in good agreement with the experimental data, demonstrating the capacity of the model to evaluate the behavior of multicomponent gas mixtures., info:eu-repo/semantics/publishedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Combining molecular modelling approaches for a holistic thermophysical characterisation of fluorinated refrigerant blends

  • Jovell, Daniel
  • Alonso, Gerard
  • Gamallo, Pablo
  • González Olmos, Rafael
  • Quinteros-Lama, Héctor
  • Llovell, Felix
After Montreal Protocol, hydrofluorocarbons (HFCs) appeared to be a permanent solution for replacing previous ozone-depleting substances. However, their utilisation has now progressively decreased following the Kigali Amendment application in 2016 due to their high global warming potential (GWP). Unsaturated HFCs, such as hydrofluoroolefins (HFOs), are considered feasible alternatives due to their high reaction rates and low atmospheric lifetimes, resulting in very low GWP. However, available data on their physicochemical behaviour still needs to be improved, even with the recent increase in the amount of new experimental data for these systems. In this direction, computational tools provide a quick pathway to screen their properties and complete the information obtained from experimental work. In this contribution, two different molecular modelling tools, molecular dynamics (MD) simulations and the soft-SAFT equation of state (EOS), are combined to compute the coexistence densities, vapour pressure, heat capacity, interfacial tension, and dynamic viscosity of several refrigerant blends based on 3rd and 4th generation compounds, in order to provide a thermodynamic analysis of the properties of these mixtures, addressing them for drop-in replacement purposes. Results from MD are compared with REFPROP data and those from soft-SAFT, where the capacities of both modelling methods are addressed. In general, quantitative agreement is achieved using the two approaches, offering a framework to screen these properties for new mixtures., info:eu-repo/semantics/publishedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Advancing electrified CO2 capture: Material design strategies for magnetic adsorption composites

  • Stratil, Oliver
  • Cespedes, Oscar
  • Croquet, Olivier
  • Visart de Bocarmé, Thierry
  • González Olmos, Rafael
  • FERNANDEZ, JAVIER
This study investigates the design and performance of magnetic adsorption composites (MACs) for application in electrified CO2 capture with temperature swing adsorption from point sources. The MACs were composed of Fe3O4 as magnetic component to act as inductive heating source and zeolite 13× as a CO2 adsorbent. Three MAC configurations were prepared and evaluated under temperature feedback-loop control at different desorption temperatures ranging between 100−150°C: Homogeneous mixture of Fe3O4 and zeolite 13×, a core-shell structure with magnetic Fe3O4 core and zeolite 13× shell, and a mixed bed configuration containing separate heating and adsorbent beads. Resistive wall heated and room-temperature desorption experiments were conducted as references. In average, the heating experiments reached a steady-state effective working capacity after around 20 adsorption-desorption cycles. The homogenous mixture exhibited the most favorable performance, combining fast heating response, stable temperature control, and high CO2 desorption efficiency. When reaching steady state, it achieved 99% desorption within 94s and the highest productivity of 0.52 mgCO2 / gMAC*S with a theoretical regeneration energy of 3.0 MJ/kgCO2 [Formula presented]. The core-shell structure showed limited temperature control due to low heat transfer through the shell, while the mixed bed configuration achieved moderate performance. Compared with column wall heating, inductive heating improved thermal efficiency by delivering heat directly to the adsorbent region. However, efficient coupling of the magnetic field to the magnetic material remains the key challenge for energy efficient induction heated TSA., info:eu-repo/semantics/publishedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A Tribute to Ullmann’s Work: Expanding Copper Coil Reactor Applications toward the Hydroxylation of Aryl Bromides

  • Molins Colomer, Maite
  • FERNANDEZ, JAVIER
  • Berzosa, Xavier
Copper coil flow reactors represent an economic, abundant, and durable platform for conducting copper-catalyzed reactions. These have been used in the past for Ullmann-type reactions starting from aryl iodides. However, no procedures have been described for the activation of less reactive aryl bromides. In this work, we successfully developed a method for the hydroxylation of aryl bromides promoted by a copper coil reactor. Notably, the presence of both a diamine ligand and DMF is key for the reaction to proceed. An inorganic base such as Na2CO3 also improved the reaction yield by minimizing the formation of side products. The setup has been applied to a range of disubstituted aryl bromides in moderate to good yields and was tested under 24 h of continuous operation, showing stable yields, thus proving the robustness of the catalysis. Finally, the lifetime of a copper reactor operating under the described conditions has been calculated for the first time, proving that this technology is safe to operate at an industrial scale., info:eu-repo/semantics/publishedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Copper Coils as Efficient and Inexpensive Reactors for the Synthesis of Tetrazoles in Flow Chemistry

  • Molins Colomer, Maite
  • Roig, Natàlia
  • FERNANDEZ, JAVIER
  • Berzosa, Xavier
Sartans are an important family of drugs used to treat hypertension. A common characteristic of most of them is a biphenyl moiety with a tetrazole ring in the ortho position of the phenyl–phenyl bond. This tetrazole is typically synthesized from the respective nitriles through a [3 + 2] azide-nitrile cycloaddition. However, the use of large amounts of azides at high temperatures for extended periods of time is inherently concerning, as serious accidents can occur if safety protocols are not thoroughly developed and implemented. The implementation of these procedures in continuous flow would therefore be beneficial from the safety perspective. In this article, a method is presented for the preparation of tetrazoles from the respective nitriles employing a copper coil as reactor and catalyst. The reaction parameters have been studied and optimized to maximize conversion. A variety of benzonitriles with different ring substituents have been transformed in moderate to good yields and copper leaching has been analyzed, showing that the copper leached is enough to catalyze this reaction. More interestingly, the method has been applied to obtain the tetrazole ring present in a key intermediate used in sartan manufacturing, a highly sterically hindered compound., info:eu-repo/semantics/acceptedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Thermophysical Characterization of Sustainable Pathways for Hydrofluorocarbons Separation Utilizing Deep Eutectic Solvents

  • Alencar, L.V.T.D.
  • González Barramuño, Bastián
  • Rodriguez Reartes, S.B.
  • Quinteros-Lama, Héctor
  • Garrido, J.M.
  • Codera, Victoria
  • Pou, Josep Oriol
  • Tavares, Frederico
  • González Olmos, Rafael
  • Llovell Ferret, Félix Lluís
The widespread use of hydrofluorocarbons (HFCs) in refrigeration ushered in a significant environmental challenge due to their high global warming potential. Effective recovery and separation techniques are imperative to mitigate their adverse impacts and promote sustainability. This study investigates the solubility behavior of four common HFCs (R-125, R-134a, R-32, and R143a) using choline chloride ([Ch]Cl) and tetramethylammonium chloride (TMAC) based Deep Eutectic Solvents (DESs) as ecofriendly, low-toxicity and low-cost alternatives, provided the promising selectivity exhibited by some of them in separating HFC mixtures. The new experimental data are completed by a comprehensive thermodynamic characterization employing the soft-SAFT equation. This modeling enables the description of the density and viscosity of pure DESs, enthalpy and entropy of dissolution, Henry’s constants, and ideal selectivity. From these results, the competitive selectivity among gases in multi-component blends and DESs is predicted. R-32 appears to have the highest affinity in DESs, followed by R-134a, R-143a, and R-125, while TMAC:EG (1:3) shows the highest absorption capacity for all HFCs. Despite relatively low absorption rates, DESs containing TMAC:GL (1:3) and [Ch]Cl:GL (1:3) + 10 wt% exhibit promising selectivity for separating HFCs mixtures, especially those containing R-32, which holds significance for applications in recovering commercial blends like R410A and R407F., info:eu-repo/semantics/publishedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Bayesian Optimization of a Suzuki Coupling for the Industrial Synthesis of a Sartan Drug Intermediate

  • Molins Colomer, Maite
  • FERNANDEZ, JAVIER
  • Vázquez Vázquez, Daniel
  • Berzosa, Xavier
Sartans are an important family of drugs used to treat hypertension. A common characteristic of most of them is a biphenyl moiety, commonly obtained through a Suzuki-Miyaura cross-coupling reaction, of which thousands of tons are produced every year. Bayesian Optimization (BO), a machine-learning technique to find the optimum of complex unknown functions with a minimum number of test points, has been applied to optimize the reaction conditions in continuous flow with a focus on lowering the costs and increasing both the productivity and the sustainability of the process, as evaluated through its Process Mass Intensity (PMI). Although this is a common chemical transformation, the fact that it happens in a biphasic medium with organometallic catalysis makes its optimization more challenging. Six variables were identified as important for the reaction system: residence time, temperature, equivalents of the nonlimiting reactant, mol % of catalyst, mol % of ligand, and solvent volumes. With less than 40 experiments, the BO algorithm achieved solutions that increased the productivity up to 4 times compared to the initial results of the DOE experiments and reduced the cost by around 30%. A Pareto front with different optimal solutions was provided at the end of the optimization, and the point with the lowest cost and the lowest PMI was scaled up to increase productivity while keeping the unitary cost unchanged., info:eu-repo/semantics/publishedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Electrifying CO2 temperature swing adsorption: A comparative review of resistive, induction, and microwave heating from material properties to process performance

  • Stratil, Oliver
  • Gonzalez Olmos, Rafael
  • FERNANDEZ, JAVIER
Electrified temperature swing adsorption (eTSA) has emerged as a promising approach for intensified post-combustion CO2 capture by enabling direct heat generation within the adsorption bed and thereby reducing the thermal limitations associated with conventional externally heated TSA systems. This review systematically compares the three main electrified heating approaches currently investigated for post-combustion CO2 capture: Resistive heating (RH), Induction heating (IH), and Microwave heating (MWH). To improve comparability across the fragmented and predominantly laboratory-scale eTSA literature, publications of comparable boundary conditions were analyzed using homogeneous evaluation criteria including working capacity, CO2/N2 selectivity, heating rate, temperature homogeneity, regeneration energy and electrical and thermal energy efficiencies. Among the reviewed adsorbents, physisorbents dominated the current eTSA literature, particularly metal-organic frameworks (MOFs), zeolites, and activated carbons (ACs). Mg-MOF-74 and Mg-Gallate exhibited the highest working capacities, followed by the zeolites 13X and NaUSY, while AC offers direct applicability for RH and MWH because of its conductive and microwave-responsive properties. However, humidity sensitivity remains a major limitation for high adsorption capacity physisorbents. All reviewed electrified heating approaches achieved substantially higher heating rates than conventional conductive wall heating or hot gas purge systems. RH has a potentially very high overall energy efficiency, although homogeneous current distribution remains challenging. IH provides high flexibility in adsorbent selection through magnetic heating additives and offers strong potential for homogeneous internal heating, while efficient magnetic field coupling remains the key challenge for energy-efficient operation. MWH enables extremely rapid heating without necessarily requiring additional heating materials but faces challenges regarding temperature homogeneity and electric-to-thermal energy efficiency. Overall, all electrified approaches still face important scale-up challenges regarding heat and field distribution, and electrical-to-thermal energy efficiency. This review highlights the strong potential of eTSA for flexible and intensified CO2 capture while identifying humidity-tolerant adsorbents, cyclic stability, heat-management optimization, and realistic process-scale evaluation as key priorities for future research and industrial implementation., info:eu-repo/semantics/publishedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Absolute environmental sustainability assessment of emerging working fluids in organic rankine cycles

  • Shirmohammadi, Reza
  • González Olmos, Rafael
  • Calvo Serrano, Raul
  • Llovell, Felix
  • González Olmos, Rafael
New working fluids (WFs) have been recently proposed to enhance the environmental performance of Organic Rankine Cycles (ORCs) in waste heat recovery systems. However, a critical gap remains in the comprehensive evaluation of their environmental impacts, particularly those associated with the production of these compounds and their use in ORC systems. This study performs a comprehensive absolute environmental sustainability assessment (AESA) to evaluate the environmental trade-offs of replacing traditional WFs, such as R245fa, with emerging alternatives in ORC systems. An innovative methodology, integrating process simulation, life cycle assessment (LCA), prospective analysis, and the planetary boundaries (PBs) framework, is employed to provide a holistic sustainability assessment. The results show that using emerging WFs reduces 85% of the carbon footprint of ORCs. Although this transition shifts environmental burdens to the ozone depletion impact category, the system remains within the PBs’ safe operating space. The burden of the other environmental impact categories studied is reduced by more than 15%. The prospective analysis highlights that the transition from current to alternative WFs for ORC systems could cut around 237 million tons of annual CO2 emissions by 2050., info:eu-repo/semantics/acceptedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Non-thermal plasma CO2 conversion enhanced by CeO2-doped BaTiO3 and internal electrode cooling

  • Stratil, Oliver
  • Pou, Josep Oriol
  • Abad, Manuel David
  • González Olmos, Rafael
  • FERNANDEZ, JAVIER
This work investigates the combined impact of using cerium oxide (CeO2) as a catalyst and internal electrode cooling on CO2 conversion into CO in a non-thermal plasma reactor packed with barium titanate (BaTiO3). BaTiO3 is successfully modified with CeO2 via a wetness impregnation method, yielding samples with 0%, 3%, 17%, and 57% CeO2 loadings. It is observed that a low CeO2 loading of 3% increased the CO2 conversion and energy efficiency by up to 38% compared to the undoped BaTiO3, while higher loadings (17% and 57%) led to reduced performance. The use of a cooling strategy through the inner electrode, using air convection (passive cooling) or water flow (active cooling), increases both CO2 conversion and energy efficiency by strengthening plasma generation and reducing the recombination of CO and O2. Specifically, conversion increases from 18% without cooling to 36% with passive cooling, and further to 47% when combined with 3% CeO2 doping and active water cooling. In parallel, the energy efficiency increases from 0.3 - 2% (undoped, uncooled) to 0.5 - 16% with 3% CeO2 doping under both passive and active internal cooling., info:eu-repo/semantics/publishedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Non-target metabolomic approach of the toxic effects of glyphosate in zebrafish (D. rerio)

  • Marí­n-Garcí­a, Marc
  • Bellot, Marina
  • Mandal, Rupasri
  • Wishart, David S
  • Tauler, Romà
  • Raldua, Demetrio
  • Barata, Carlos
  • Gomez, Cristian
Glyphosate (GLY) is the most widely used herbicide globally and is frequently detected in aquatic environments at low concentrations, raising concerns about its potential long-term effects on non-target organisms. However, the systemic metabolic disruptions of chronic GLY exposure in aquatic vertebrates remain poorly understood, especially at environmentally relevant concentrations. This study investigates the metabolic disruptions of GLY exposure in zebrafish (D. rerio) using a non-targeted metabolomic approach. Brain, gut, and fecal samples were analyzed after two weeks of exposure to environmentally relevant concentrations (0.3 and 3 μg L−1). Metabolic profiling was performed using LC-HRMS data processed via the Regions of Interest Multivariate Curve Resolution (ROIMCR) method, resolving up to 70 components per tissue and capturing >99 % of the experimental variance. Direct MSident annotation revealed diverse biomolecules, including amino acids, sugars, nucleotides, and organic acids. Tentative identification yielded 92, 182, and 117 metabolites in the brain, gut, and feces, respectively, further confirmed by the KEGG database. Statistical analysis revealed significant metabolic differences between control and GLY-treated groups, particularly at higher concentrations. Significantly altered metabolites were observed in the brain (37), gut (75), and feces (31), respectively. Fifteen overlapping metabolites between the studied brain and gut tissues suggest a GLY-induced gut-brain axis disruption. Functional enrichment analysis showed down-regulation of pathways related to amino acid, lipid, and energy metabolism, especially in gut and brain tissues, while fecal metabolites were generally up-regulated. These results demonstrate that GLY exposure induces tissue-specific and systemic metabolic disturbances in zebrafish, potentially linked to oxidative stress and neurotoxicity, with implications for aquatic health and environmental risk assessment., info:eu-repo/semantics/acceptedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Direct UV photolysis of cloperastine in aqueous solution: Kinetic model and degradation pathway

  • Marí­n-Garcí­a, Marc
  • González Olmos, Rafael
  • Gómez-Canela, Cristian
The increasing production and release of synthetic organic chemicals, including pharmaceuticals, into our environment has allowed these substances to accumulate in our surface water systems. Current purification technologies have been unable to eliminate these pollutants, resulting in their ongoing release into aquatic ecosystems. This study focuses on cloperastine (CPS), a cough suppressant and antihistamine medication. The environmental impact of CPS usage has become a concern, mainly due to its increased detection during the COVID-19 pandemic. CPS has been found in wastewater treatment facilities, effluents from senior living residences, river waters, and sewage sludge. However, the photosensitivity of CPS and its photodegradation profile remain largely unknown. This study investigates the photodegradation process of CPS under simulated tertiary treatment conditions using UV photolysis, a method commonly applied in some wastewater treatment plants. Several transformation products were identified, evaluating their kinetic profiles using chemometric approaches (i.e., curve fitting and the hard-soft multivariate curve resolution-alternating least squares (HS-MCR-ALS) algorithm) and calculating the reaction quantum yield. As a result, three different transformation products have been detected and correctly identified. In addition, a comprehensive description of the kinetic pathway involved in the photodegradation process of the CPS drug has been provided, including observed kinetic rate constants., info:eu-repo/semantics/acceptedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Integration of adsorption-based carbon capture with alkaline wastewater neutralization: Pilot-scale techno-economic and environmental assessment

  • García-Atencia, M.
  • Pujol, J.
  • FERNANDEZ, JAVIER
  • González Olmos, Rafael
The integration of carbon capture and utilization (CCU) technologies into industrial processes opens new pathways to mitigate climate change while aligning with the principles of the circular economy. This study evaluates the technical, environmental and economic performance of using CO2 captured via vacuum swing adsorption (VSA) for the on-site neutralization of alkaline wastewater generated in a food processing facility. The pilot-scale VSA unit of this study treated flue gas from a natural gas-fired boiler, producing 79 tons of CO2 per year with 76% (w/w) of CO2 purity, 67% of CO2 recovery and specific energy demand of 0.61 kWh/kgCO2, including energy for final CO2 compression. The captured CO2 was successfully used to neutralize the alkaline wastewater. A life cycle assessment (LCA) was carried out to compare three neutralization scenarios: (i) conventional treatment with sulfuric acid (H2SO4), (ii) the use of commercial CO2, and (iii) a circular scenario with the on-site reuse of the CO2 captured through VSA. The LCA results indicate that the circular scenario reduces the climate change impact by 65% and 48% compared to the commercial CO2 and H2SO4 scenarios, respectively. The environmental impact in the circular scenario is at least 78% lower than the worst-case scenario across nearly all impact categories. From an economic perspective, the circular scenario achieved similar costs to using H2SO4 while offering a 40% cost reduction compared to commercial CO2. These findings demonstrate that on-site CCU for alkaline wastewater treatment is technically feasible at pilot scale and a more sustainable alternative., info:eu-repo/semantics/publishedVersion