Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A conceptual model of polyoxymethylene dimethyl ether 3 (PODE3) spray combustion under compression ignition engine-like conditions

  • Xuan, Tiemin
  • Li, Haojie
  • Wang, Yutao
  • Chang, Yachao
  • Jia, Ming
  • He, Zhixia
  • Wang, Qian
  • Cao, Jiawei
  • Payri, Raul|||0000-0001-7428-5510
[EN] As one of the most popular synthetic fuels (E-fuels), Polyoxymethylene dimethyl ethers(PODEX) have garnered significant attention among researchers in the compression ignition engine field. This work aims to provide an exhaustive analysis of the combustion characteristics of PODE3, which typically constitutes the primary component of PODEX. This research seeks to deepen our understanding of the flame structure of PODE3, particularly in relation to ambient temperature variation, and unravel the underlying mechanisms driving the observed trends. To achieve this aim, a range of optical techniques was employed within a high-temperature high-pressure combustion vessel to quantify various general combustion parameters and assess OH* chemiluminescence, formaldehyde, and soot distribution. Two additional reference fuels, pure n-dodecane and a blend of 50 % vol n-dodecane and 50 % vol PODE3 were also tested. Additionally, some analysis from chemical kinetics and 1D spray model calculations were used to substantiate the experimental observations. The findings reveal that the flame structure of PODE3 differs significantly from traditional diffusion flames associated with diesel-like sprays. The flame lift-off length (LOL) of PODE3 aligns closely with that of n-dodecane, and maintains the twolobe structure under high-temperature conditions. In contrast, under low ambient temperatures, the LOL of PODE3 significantly extends, accompanied by a concentration of OH* radicals at the spray center. The notable sensitivity of PODE3 flames to temperature variation is related to the chemical kinetics of formaldehyde and CO. As a result of the analysis, conceptual models of PODE3 flames under varying temperatures were proposed in the end., This study was partially funded by the National Key Research and Development Program of China (2022YFE0199600) and the National Natural Science Foundation of China (52276116) .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Multiple combustion modes switching to realize full-load efficient energy conversion of n-butanol/diesel dual direct injection (DI2) engine

  • Cai, Yikang
  • Jia, Ming
  • Li, Yaopeng
  • Cao, Jingjie
  • García Martínez, Antonio|||0000-0001-5783-4936
  • Monsalve-Serrano, Javier|||0000-0001-8593-095X
[EN] The dual direct injection (DI2) engine system involves the in-cylinder co-direct injections of two fuels with the potential to address the operation limitations of traditional dual-fuel engines at part load conditions. However, for the DI2 engine, its optimal fueling strategies and combustion modes under different load conditions are still unknown. By selecting n-butanol and diesel as the test fuels, this study devotes to identifying the optimal combustion schemes of the DI2 engine at different loads using three-dimensional engine simulation combined with an improved genetic algorithm, and further revealing its optimal fuel stratification and auto-ignition characteristics. The results showed that for low load, the optimal DI2 strategy is to pre-inject a low proportion of diesel (near 20%) into the cylinder early in the compression stroke and then introduce n-butanol into this diesel atmosphere. On the contrary, the fuel injection sequence is reversed at mid load, in which n-butanol is first injected into the combustion chamber to form a partially premixed n-butanol/air mixture, followed by a late diesel injection at ¿ 50 to ¿ 20 ¿CA after top dead center (TDC). As for the high-load operation, n-butanol is still preferred to be partially premixed, but the diesel injection event is delayed until after TDC. The main factors driving the ignition under low load are the fuel reactivity and temperature, while at mid load the ignition is primarily initiated by fuel reactivity, however, the effect of temperature is highlighted under high load., The work was financially supported by the National Key Research and Development Program of China (Grand No. 2022YFE0199600).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Experimental optimization toward high efficiency and low emissions in an ammonia-fueled RCCI engine with various reactivity enhancements

  • Ding, Rui
  • Li, Yaopeng
  • Li, Haoran
  • Duan, Huiquan
  • Jia, Ming
  • García Martínez, Antonio|||0000-0001-5783-4936
  • Monsalve-Serrano, Javier|||0000-0001-8593-095X
[EN] Ammonia (NH3) is a carbon-free and renewable fuel for conventional diesel engines to effectively reduce carbon emissions. However, the low combustion efficiency, as well as high nitrous oxide (N2O) and nitrogen oxides (NOx) emissions, are the primary obstacles for ammonia applications. In this study, various combustion enhancements are applied to an ammonia-fueled reactivity-controlled compression ignition (RCCI) engine to improve performance by optimizing the reactivity of ignition trigger fuel and the spatial reactivity of premixed fuel/air mixture, as well as elevating the ambient temperature. Compared to diesel, using polyoxymethylene dimethyl ether (PODE) as the ignition trigger fuel reduces unburned NH3 by 13 %. Increasing intake temperature allows the engine to operate at an earlier start of injection (SOI) and a higher ammonia energy ratio (AER), contributing to higher indicated thermal efficiency (ITE). Advancing SOI or adopting split injection of PODE can improve the spatial reactivity, resulting in a maximum reduction of 71 % in unburned NH3. By adopting the three strategies of enhancements, the trade-off relationship among ITE, unburned NH3, and greenhouse gas (GHG) can be defeated to achieve satisfactory engine performances. Finally, ITE is increased by 7.56 %, the unburned NH3 is declined by 79.3 %, and GHG emissions are decreased by 25.4 % simultaneously., The work is financially supported by the National Science Fund for Distinguished Young Scholars (Grant No. 52325603), the National Natural Science Foundation of China (Grant No. 52406125), and the National Key Research and Development Program of China (Grant No.2022YFE0199600).