Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A conceptual model of polyoxymethylene dimethyl ether 3 (PODE3) spray combustion under compression ignition engine-like conditions

  • Xuan, Tiemin
  • Li, Haojie
  • Wang, Yutao
  • Chang, Yachao
  • Jia, Ming
  • He, Zhixia
  • Wang, Qian
  • Cao, Jiawei
  • Payri, Raul|||0000-0001-7428-5510
[EN] As one of the most popular synthetic fuels (E-fuels), Polyoxymethylene dimethyl ethers(PODEX) have garnered significant attention among researchers in the compression ignition engine field. This work aims to provide an exhaustive analysis of the combustion characteristics of PODE3, which typically constitutes the primary component of PODEX. This research seeks to deepen our understanding of the flame structure of PODE3, particularly in relation to ambient temperature variation, and unravel the underlying mechanisms driving the observed trends. To achieve this aim, a range of optical techniques was employed within a high-temperature high-pressure combustion vessel to quantify various general combustion parameters and assess OH* chemiluminescence, formaldehyde, and soot distribution. Two additional reference fuels, pure n-dodecane and a blend of 50 % vol n-dodecane and 50 % vol PODE3 were also tested. Additionally, some analysis from chemical kinetics and 1D spray model calculations were used to substantiate the experimental observations. The findings reveal that the flame structure of PODE3 differs significantly from traditional diffusion flames associated with diesel-like sprays. The flame lift-off length (LOL) of PODE3 aligns closely with that of n-dodecane, and maintains the twolobe structure under high-temperature conditions. In contrast, under low ambient temperatures, the LOL of PODE3 significantly extends, accompanied by a concentration of OH* radicals at the spray center. The notable sensitivity of PODE3 flames to temperature variation is related to the chemical kinetics of formaldehyde and CO. As a result of the analysis, conceptual models of PODE3 flames under varying temperatures were proposed in the end., This study was partially funded by the National Key Research and Development Program of China (2022YFE0199600) and the National Natural Science Foundation of China (52276116) .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A numerical study on transient soot evolution of spray A flames based on a parcel tracing methodology

  • Gao, Wenli
  • Shi, Zhizhao
  • Xuan, Tiemin
  • Shang, Weiwei
  • Bao, Hesheng
  • He, Zhixia
  • García-Oliver, José M|||0000-0002-2676-9681
[EN] Accurately controlling combustion and achieving cleaner emissions in compression ignition engines need a better understanding of soot evolution. In the present study, the transient characteristics of in-flame soot evolution of spray A within the engine combustion network are numerically investigated under high-temperature and high-pressure conditions using a parcel tracing methodology. A virtual parcel driven by the current flow field, recording the local information to understand the evolution of soot. A two-equation soot model has been implemented based on the OpenFOAM platform, coupling with a E-Y Eulerian spray model, and unsteady flamelet progress variable combustion model. The computed results indicate good agreement with the experimental ones under studied conditions. Results show that oxygen concentration significantly affects the onset soot location, which occurs at some radial distance away from the spray axis under low oxygen conditions, while it aligns along the spray axis for high oxygenconditions. The peak soot location of quasi-steady flames is concentrated around an equivalence ratio region (2 < U < 2:2) regardless of operating conditions. The chemical source of soot production is dominated by surface growth rate after the traced parcels pass through flame liftoff length where the local temperature exceeds 1500 K., The authors acknowledge the financial support from the National Nature Science Foundation of China (No. 52276116).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Experimental study of the effect of hydrogenated catalytic biodiesel-Ethanol blends on combustion and soot formation process within an optical engine

  • Cao, Jiawei
  • Liu, Qing
  • Li, Wenhao
  • Yan, Feibin
  • Zhong, Wenjun
  • Xuan, Tiemin
  • He, Zhixia
  • Wang, Qian
[EN] The utilization of Ethanol in compression ignition engines has demonstrated great potential for reducing greenhouse gas emissions and breaking the NOX-soot trade -off relationship. However, it is usually necessary to burn ethanol with high-reactivity fuels to address its problem of high resistance to autoignition and low power output, especially during cold-start or low-load conditions. However, this combustion of high-reactivity fuels can lead to high soot emissions. This paper examines the characteristics of in-cylinder soot formation throughout two-color pyrometry in an optical engine operated in partially premixed low-temperature combustion mode, focusing on hydrogenated catalytic biodiesel/ethanol/n-octanol blends with two different proportions (75%/ 15%/10% and 60%/30%/10% by volume) and varying injection strategies. The results indicate that both blends exhibit a typical two-stage heat release process, with the highest cylinder pressure, earliest soot onset and the highest integrated KL factor occurring at an injection timing of - 25 degrees CA. By slightly compensating for power output, a higher proportion of ethanol in the blends leads to a significant in-flame soot reduction and a more uniform soot distribution within the cylinder., This research work has been supported by the financial support of National Natural Science Foundation of China (No.52276116, 52076103) ; We also acknowledge to the finance support from China Scholarship Council (No. 201808320236).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A study on application of machine-learning on DBI soot diagnostics

  • Liu, Dan
  • Xuan, Tiemin
  • He, Zhixia
  • Yao, Mingfa
  • Payri, Raul|||0000-0001-7428-5510
[EN] Nowadays, Diffused Background-illumination Extinction Imaging technique (DBI) has been widely applied to quantify the in-flame soot formation of diesel-like sprays. In order to eliminate the errors on soot KL value brought from flame radiation, the soot radiation images are usually needed to be recorded between every two successive back light-on pulses. Consequently, it is necessary to do the frame interpolation for the missing flame radiation images and back light-on images. In this study, a Super SloMo machine-learning method was applied to generate the missing frames and the accuracy of interpolated frames was evaluated from three aspects, namely the frame interval length, prediction region and number of intermediate frames. Meanwhile, Gunner Farnebäck method was applied here as a reference. The results show that the Super SloMo method consistently outperformed the Gunner Farnebäck method in terms of accuracy, regardless of the variations on frame intervals, soot regions, as well as interpolated frame numbers. Consequently, the application of the Super SloMo method in conjunction with the DBI technique significantly improved the accuracy of soot KL value, resulting in a 26.4% reduction in average KL error compared to the Gunner Farnebäck method in the studied cases., This research work has been supported by the financial support of National Natural Science Foundation of China (52276116, 51906087) .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A comparative study on combustion characteristics of PPC and RCCI combustion modes in an optical engine with renewable fuels

  • Wu, Pengwei
  • Xuan, Tiemin
  • He, Zhixia
  • Shao, Zhuang
  • Wang, Qian
  • Payri, Raul|||0000-0001-7428-5510
[EN] Application of renewable fuels in compression ignition engines is a promising approach to reducing greenhouse gas emissions in the heavy-duty transportation sector. However, identifying a single alternative fuel capable of fully replacing conventional diesel under full-load conditions remains challenging. In this study, the combustion characteristics of two renewable fuels with different reactivities – methanol and hydrogenated catalytic biodiesel (HCB) – were investigated in an optical engine operated under partially premixed combustion (PPC) and reactivity-controlled compression ignition (RCCI) modes, respectively. A two-color (2C) method was employed to quantify in-flame soot formation, and flame oscillation phenomena were captured and evaluated. The results indicate that the RCCI mode yields a lower peak cylinder pressure, leading to smoother and more stable combustion compared with PPC. In addition, the more homogeneous fuel distribution achieved in RCCI further reduces soot formation from the blended fuel. With increasing methanol fraction, the higher oxygen content in the blend also significantly suppresses soot formation. Flame oscillations are found to be closely related to the rate of cylinder pressure rise. Under PPC conditions, multi-point autoignition causes a rapid pressure increase, resulting in larger oscillation amplitudes (M15: 0.268, M25: 0.772). By contrast, under RCCI operation, the heat release process is more gradual and stable, leading to weaker oscillations (M15: 0.161, M25: 0.064) than in PPC., This study was funded by the National Natural Science Foundation of China (52276116).