Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Combined experimental and numerical studies on soot characteristics of diesel sprays with split injection strategies

  • Xuan, Tiemin
  • Maes, Noud
  • De Leon-Ceriani, Daiana
  • Pachano-Prieto, Leonardo Manuel
  • He, Zhixia
  • García-Oliver, José M|||0000-0002-2676-9681
[EN] Experimental and numerical studies on the soot characteristics of Spray A flames were conducted with a focus on the effects of different split injection strategies in high-pressure high-temperature vessels within the engine combustion network. Three high-speed imaging techniques were used to obtain the transient information of flame evolution. Schlieren was applied to identify the spray boundaries and spray penetration. Moreover, a combined extinction and radiation technique was applied to quantify the spatial soot and temperature fields simultaneously. Finally, high-speed OH * chemiluminescence was applied at the baseline condition to measure the temporal high-temperature flame evolution. To substantiate the analysis, the experimental results were compared with the computational fluid dynamics (CFD) predictions from a Reynolds-averaged Navier Stokes approach with Unsteady Flamelet Progress Variable combustion and a two-equation soot-in-flamelet models, which qualitatively reproduced the experimental results.According to the chosen split injection strategy, dwell and first-injection pulse durations were varied. For all cases, the ignition delay (ID) and soot production of the second-injection pulse were shorter and higher than those of the first one, respectively. A slight change in the experimental soot production was observed when the dwell time was changed. The CFD calculations revealed a small reduction in the ID of the second pulse with long dwell times, which was due to variations in the interaction between the newly injected fuel and combustion recession. However, the effect of dwell variation was extremely small to produce significant differences in the evolution of the second pulse, neither in combustion nor in soot production. With regard to the duration of the first injection, no effect on the experimental soot production of the second pulse was observed despite noticeable differences due to the first pulse. The CFD results indicated that because of the quasi-steady flow and combustion process near the nozzle along the first injection, the evolution of the spray in the region close to the nozzle was identical in all first-pulseduration cases, with differences only occurring at the tip of the first pulse jet. Thus, the second pulse evolution occurred under identical conditions for ignition and soot production. Although the sensitivity to both dwell and first-pulse durations was low, the CFD analysis highlighted the important effects of both end-of-injection wave propagation and combustion recession on the ignition and soot production of the second pulse., This research work has been partially supported by the National Natural Science Foundation of China (51906087) and the Natural Science Foundation of Jiangsu Province (BK20190856) .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A study on application of machine-learning on DBI soot diagnostics

  • Liu, Dan
  • Xuan, Tiemin
  • He, Zhixia
  • Yao, Mingfa
  • Payri, Raul|||0000-0001-7428-5510
[EN] Nowadays, Diffused Background-illumination Extinction Imaging technique (DBI) has been widely applied to quantify the in-flame soot formation of diesel-like sprays. In order to eliminate the errors on soot KL value brought from flame radiation, the soot radiation images are usually needed to be recorded between every two successive back light-on pulses. Consequently, it is necessary to do the frame interpolation for the missing flame radiation images and back light-on images. In this study, a Super SloMo machine-learning method was applied to generate the missing frames and the accuracy of interpolated frames was evaluated from three aspects, namely the frame interval length, prediction region and number of intermediate frames. Meanwhile, Gunner Farnebäck method was applied here as a reference. The results show that the Super SloMo method consistently outperformed the Gunner Farnebäck method in terms of accuracy, regardless of the variations on frame intervals, soot regions, as well as interpolated frame numbers. Consequently, the application of the Super SloMo method in conjunction with the DBI technique significantly improved the accuracy of soot KL value, resulting in a 26.4% reduction in average KL error compared to the Gunner Farnebäck method in the studied cases., This research work has been supported by the financial support of National Natural Science Foundation of China (52276116, 51906087) .