Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Describing and modeling the release of an antimicrobial agent from an active PP/EVOH/PP package for salmon

  • Cerisuelo Ferriols, Josep Pascual
  • Bermúdez, José M.
  • Aucejo, Susana
  • Catalá, Ramón
  • Hernandez Muñoz, Maria Pilar
  • GAVARA CLEMENTE, RAFAEL|||0000-0001-6376-8939
[EN] Natural antimicrobial active packaging is an emerging technology for fresh fish preservation in which a chemical compound of natural origin is purposely incorporated into a packaging material to be released into the food surface in order to protect it from spoilage by foodborne microorganisms. The maximum efficiency of an antimicrobial package can only be obtained when an adequate activity is achieved immediately after the packaging operation and is maintained constant throughout the product's shelf life. This work develops an active package designed for the preservation of fresh farmed salmon in cubes or slices, made up of a rigid polypropylene (PP)/ethylene-vinyl alcohol copolymer (EVOH)/PP tray heat-sealed with an active PP/EVOH/PP film lid in which 6.5% carvacrol is incorporated in the EVOH kernel as an antimicrobial active agent. The work also includes the measurement of the carvacrol kinetics and equilibrium parameters in the preserved salmon fillets, and proposes a mathematical model based on the finite element method to describe and simulate the common performance of the developed package/food system, and to predict its behavior under different working conditions or system configurations with the objective of finding the optimum combination of variables that ensure the best packaging performance. The results obtained from the determination of parameters showed a rapid migration of the active compound through the fish muscle, and a low affinity of the agent molecules for the food matrix. The active package was successfully developed, and the proposed model was satisfactorily used to detect the key factors that govern the package performance, and also to improve the package design by modifying the thickness distribution of the multilayer active film. (C) 2013 Elsevier Ltd. All rights reserved., The authors are grateful to the Spanish Ministry of Science and Innovation (Project AGL2009-08776), EU (Nafispack Project 212544), and Generalitat Valenciana (J.P.C. fellowship) for financial support, and to Mr. Karel Clapshaw (translation services).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Natural Antimicrobial - Containing EVOH Coatings on PP and PET Films: Functional and Active Property Characterization

  • Gavara Clemente, Rafael
  • Cerisuelo Ferriols, José Pascual
  • Hernández Muñoz, Pilar
[EN] Natural antimicrobials are currently being tested by many researchers for active packaging applications as a response to consumer demands for safer food products. In previous work, several packaging materials consisting of ethylene vinyl alcohol (EVOH)-coated polypropylene (PP) films containing essential oils or their constituents as active agents were successfully developed and tested for antimicrobial activity. In this work, selected films from those materials, namely EVOH coatings with carvacrol, citral, marjoram essential oil, or cinnamon bark essential oil, on PP and polyethylene terephthalate (PET) substrates, were subjected to diverse physicochemical analyses in order to assess their suitability for food packaging applications. Concretely, the investigated properties were the stability of EVOH coatings on PP and PET substrates, the retainability of EVOH matrices for active compounds, the mechanical, optical, surface and barrier properties of the final active films and the effects of a matrix modification based on the addition of bentonite nanoclay on the performance of PP/EVOH active packages studied in actual working conditions. Results showed that the application of corona discharge followed by a polyethyleneimine-based primer was the best anchorage treatment available to stabilize EVOH coatings on PP and PET substrates. Furthermore, they demonstrated that the retention of active agents into EVOH matrices ranged from low to moderate, depending on the embedded substance, and that their presence into an EVOH coating in the final multilayer films did not noticeably affect their mechanical, optical or barrier properties, although it considerably improved their wettability. They also indicated that the inclusion of bentonite nanoparticles into their carrier layers substantially enhanced the performance of the final packages, while maintaining or slightly improving their other physical properties. Hence, as a conclusion, all the assayed multilayer films were considered perfectly valid for food packaging applications, and the incorporation of bentonite nanoclay to their carrier layers was also highly recommended. Copyright (c) 2014 John Wiley & Sons, Ltd., The authors thank the Spanish Ministry of Science and Innovation (projects AGL2009-08776 and AGL2012-39920-C03-01), European Commission (Nafispack project 212544) and Generalitat Valenciana (Josep P. Cerisuelo fellowship) for financial support, Instituto Tecnologico del Embalaje, Transporte y Logistica (associated unit of Consejo Superior de Investigaciones Cientificas) for scientific collaboration and Mr. Tim Swillens for correction services.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Antimicrobial packaging of chicken fillets based on the release of carvacrol from chitosan/cyclodextrin films

  • Higueras, Laura
  • López Carballo, Gracia
  • Hernandez Muñoz, Maria Pilar
  • Catala, Ramón
  • GAVARA CLEMENTE, RAFAEL|||0000-0001-6376-8939
[EN] Chitosan/cyclodextrin films (CS:CD) incorporating carvacrol were obtained by casting, and conditioned at 23 degrees C and 75% relative humidity prior to being immersed in liquid carvacrol until they reached sorption equilibrium. In a previous work, the in vitro antimicrobial activity of these films was studied. In this work, active films were used to inhibit microbial growth in packaged chicken breast fillets. Samples of CS:CD films loaded with carvacrol, of different sizes and thus with different quantities of antimicrobial agent, were stuck to the aluminium lid used to seal PP/EVOH/PP cups containing 25 g of chicken fillets. These samples were stored for 9 days at 4 degrees C. The packages were hermetically sealed and it was confirmed that they provided an infinite barrier to carvacrol. The partition of the antimicrobial agent within the food/packaging system was analysed. The antimicrobial devices rapidly released a large percentage of the agent load, amounts that were gained by the adhesive coating of the lid and especially by the chicken fillets. The latter were the main sorbent phase, with average concentrations ranging between 200 and 5000 mg/Kg during the period of storage. The microbiota of the packaged fresh chicken fillets - mesophiles, psychrophiles, Pseudomonas spp., enterobacteria, lactic acid bacteria and yeasts and fungi were analysed and monitored during storage. A general microbial inhibition was observed, increasing with the size of the active device. Inhibition with a 24 cm(2) device ranged from 0.3 log reductions against lactic acid bacteria to 1.8 logs against yeasts and fungi. However, the large amount of antimicrobial that was sorbed or that reacted with the fillet caused an unacceptable sensory deterioration. These high sorption values are probably due to a great chemical compatibility between chicken proteins and carvacrol. (C) 2014 Elsevier B.V. All rights reserved., The authors are grateful for financial support from the Spanish Ministry of Science and Innovation (project AGL2012-39920-C03-01), EU (Nafispack project 212544) and CSIC/European Social Fund (JAE-Predoc, L.H. fellowship), and to Mr. Karel Clapshaw (translation services).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Characterization of ethylene-vinyl alcohol copolymer containing lauril arginate (LAE) as material for active antimicrobial food packaging

  • Muriel-Galet, Virginia
  • López Carballo, Gracia
  • Hernandez Muñoz, Maria Pilar
  • GAVARA CLEMENTE, RAFAEL|||0000-0001-6376-8939
[EN] The aim of this work was to characterize, as packaging materials, antimicrobial films based on two different ethylene vinyl alcohol copolymers (EVOH 29 and EVOH 44) containing 5 and 10% lauril arginate (LAE). The characterization included optical, surface, thermal and barrier properties of the developed films, as well as the release of the agent into aqueous media. The results show that the addition of LAE did not produce relevant changes in optical, but reduced the films’ barrier properties to oxygen and water vapor, especially at high humidity conditions, and improved the wettability of the surface as demonstrated by the significant decrease in contact angle, both effects a consequence of the surfactant properties of the compound. The thermal properties confirmed that the distribution of LAE in the matrix was homogeneous, that the agent induced an antiplasticization effect and reduced the quality and percentage of the crystalline region, and that casting (or coating) is a suitable processing technology to reduce compound degradation. Finally, the release of LAE from EVOH films to water was characterized at 4 °C and 23 °C. This study showed that the agent was fully released into the food simulant from all films, although kinetically LAE diffusion was faster in EVOH 29 and at higher temperature. All these results show that the developed films present excellent functional properties and are able to release the antimicrobial agents suitably, making them promising materials for active food packaging applications., The authors acknowledge the financial support of the European Commission (Nafispack Project) and the Spanish Ministry of Economy and Competitiveness, project AGL2012- 39920-C03-01, and fellowship (V. M-G), and Mr. Tim Swillens (translation services). They also thank the collaboration of ITENE (Associate Unit of CSIC) for the measurement of the optical properties (Amparo Martinez).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Development of antimicrobial films for microbiological control of packaged salad

  • Muriel Galet, Virginia
  • Cerisuelo, Josep P.
  • López Carballo, Gracia
  • Lara, Marta
  • Hernandez Muñoz, Maria Pilar
  • GAVARA CLEMENTE, RAFAEL|||0000-0001-6376-8939
[EN] The aim of the present work was to characterize the antimicrobial efficiency of films consisting of PP/EVOH structures with oregano essential oil and citral. Both substances are known for their antimicrobial activity based on their interaction with the cell membrane. The films developed were used to pack minimally processed salads, combining modified atmosphere technology to extend shelf-life and active packaging technology to reduce possible microbiological risks. The antimicrobial activity of the films against the pathogenic microorganisms Escherichia coli, Salmonella enterica and Listeria monocytogenes and natural microflora was investigated "in vitro" and also on the food itself. The effect of release of the antimicrobial agent on the sensory characteristics of the salad was also studied. The results showed that antimicrobial activity reduced spoilage flora on the salad as well as inhibited the growth of pathogens in contaminated salads. This effect was greater against Gram-negative bacteria. Sensory studies showed that the package that was most effective and most accepted by customers was the one containing 5% oregano essential oil. (C) 2012 Elsevier B.V. All rights reserved., The authors acknowledge the financial support of the Spanish Ministry of Science and Innovation, project AGL2009-08776, V. M.-G.'s fellowship from the Generalitat Valenciana, and J. P.-C.'s fellowship from the European Commission, Nafispack Project.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Mathematical model to describe the release of an antimicrobial agent from an active package constituted by carvacrol in a hydrophilic EVOH coating on a PP film

  • Cerisuelo Ferriols, Josep Pascual
  • Muriel Galet, Virginia
  • Bermúdez, José M.
  • Aucejo, Susana
  • Catala Moragrega, Ramón
  • Hernandez Muñoz, Maria Pilar
  • GAVARA CLEMENTE, RAFAEL|||0000-0001-6376-8939
[EN] Antimicrobial active packaging is a novel technology in which a chemical compound (or mixture) is purposely incorporated into a packaging material to be released into the food to protect it from deterioration. The effectiveness of an antimicrobial package is strongly related to the balance between the controlled release of the active compound and microbial growth kinetics. This work characterizes and models the release of carvacrol from an EVOH coating on a PP film which can be employed as an active packaging system. The kinetics and extent of carvacrol mass transport within the packaging components were fully characterized as a function of relative humidity. As expected, water uptake by the EVOH coating acts as a triggering mechanism for activity. The partition equilibrium for carvacrol in the complex film largely favors (10,000-fold) the EVOH layer in dry conditions, although in humid conditions the solubility in both polymers is very close (4-fold). Kinetically, the presence of humidity increases the value of D for carvacrol in EVOH from 3 . 10(-19) m(2)/s in dry conditions to 3 . 10(-15) m(2)/s in a wet environment. After the experimental characterization of carvacrol transport, the efficiency of the release of carvacrol was estimated with a novel mathematical model based on the finite element method and successfully compared with the evolution of carvacrol concentration in a real packaging system. The model developed can be employed in the optimization of package design in order to ensure the maintenance of a specific concentration of the active agent in the headspace, high enough to prevent potential growth of a particular foodborne spoiling or pathogenic microorganism on the preserved foodstuffs. This model could easily be extended to similar packaging systems as long as an inventory of experimental data for all the parameters and coefficients involved is available, sufficiently complete to fulfill all the mathematical requirements demanded by the model. (C) 2011 Elsevier Ltd. All rights reserved., Authors thank the financial support of the Spanish Ministry of Science and Innovation (Projects AGL2006-02176 and AGL2009-08776), EU (Nafispack Project 212544), Generalitat Valenciana (J.P.C. fellowship) and Mr. Karel Clapshaw (translation services).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Development of a novel antimicrobial film based on chitosan with LAE (ethyl-N alpha-dodecanoyl-L-arginate) and its application to fresh chicken

  • Higueras, Laura
  • López Carballo, Gracia
  • Hernandez Muñoz, Maria Pilar
  • Rollini, Manuela Silvia
  • GAVARA CLEMENTE, RAFAEL|||0000-0001-6376-8939
[EN] Chitosan (CS) films incorporating the antimicrobial compound ethyl-N-alpha-dodecanoyl-L-arginate (LAE) were developed for food packaging applications. Cast chitosan films were made with 1, 5 or 10% LAE and 20% glycerol in the film forming solution. Optical properties, release of LAE and antimicrobial activity of developed films was determined, The minimum inhibitory concentration (MIC) and the minimum biocide concentration (MBC) of LAE were determined. CS films with LAE were transparent and uniform, without discontinuities or visible particles and no visual differences could be perceived between CS and CS-LAE films. When in contact with an aqueous food simulant, the agent was fully released following a Fickian behavior in a few hours at 4 and 28 T. Antimicrobial activity of films against mesophiles, psychrophiles, Pseudomonas spp., colifoms, lactic acid bacteria, hydrogen sulfide-producing bacteria, yeast and fungi, was evaluated at two, six and eight days for its application on chicken breast fillets. Films were active against bacteria, yeasts and fungi in liquid and solid media. CS films evidenced antimicrobial activity in the range 0.47-2.96 log reductions, while CS-5%LAE film produced 1.78-5.81 log reduction. Results highlighted that LAE incorporation in a chitosan-based packaging structure may provide a relevant antimicrobial activity that could improve the stability of fresh poultry products. (C) 2013 Elsevier B.V. All rights reserved., Authors thank the financial support of the Spanish Ministry of Science and Innovation (projects AGL2009-08776, AGL2012-39920-CO3-01), EU (Nafispack project 212544), and JAE program from CSIC (L.H. fellowship) and Mr. Karel Clapshaw (translation services).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Evaluation of evoh-coated pp films with oregano essential oil and citral to improve the shelf-life of packaged salad

  • Muriel Galet, Virginia
  • Cerisuelo, Josep R.
  • López Carballo, Gracia
  • Aucejo, Susana
  • Hernández Muñoz, Pilar
  • GAVARA CLEMENTE, RAFAEL|||0000-0001-6376-8939
[EN] The aim of this study was to improve the present packaging of salad by combining modified atmosphere packaging with a new antimicrobial active bag consisting of PP/EVOH film with oregano essential oil or citral, with the purpose of extending shelf-life and reducing possible microbiological risks. The (O-2) and CO2 barrier properties of PP/EVOH, mechanical properties (Young's modulus, tensile strength and elongation at break) were determined and compared with those of standard PP films. Antimicrobial tests were carried out for enterobacteria, total aerobic counts, yeasts and moulds, and lactic acid bacteria and psychrotrophic bacteria, and the effect of the release of the antimicrobial agent on the sensory characteristics of the salads was also studied. The application of the EVOH coating results in an increase in the tensile resistance of the PP films and a reduction in the elongation at break. The results showed that microorganism counts bacteria decreased especially at the beginning of the storage period. OEO and CITRAL samples had reductions of 1.38 log and 2.13 log respectively against enterobacterias, about 2 log against yeasts and moulds. The total aerobic counts reduced 1.08 log with OEO and 1.23 log with CITRAL and the reduction of lactic acid bacteria and psychrotrophic was about 2 log. Citral-based films appeared to be more effective than materials containing oregano essential oil in reducing spoilage flora during storage time. Sensory studies also showed that the package with citral was the most accepted by customers at the end of the shelf-life. (C) 2012 Elsevier Ltd. All rights reserved,, Authors thank the financial support of the Spanish Ministry of Economy and Competitiveness (Project AGL2009-08776 and V.M-G fellowships), EU (Nafispack project 212544), Generalitat Valenciana (J.P.C. fellowship) and Mr. Karel Clapshaw (translation services).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Modifications induced by the addition of a nanoclay in the functional and active properties of an EVOH film containing carvacrol for food packaging

  • Cerisuelo Ferriols, Josep Pascual
  • Alonso, José
  • Aucejo, Susana
  • Hernandez Muñoz, Maria Pilar
  • GAVARA CLEMENTE, RAFAEL|||0000-0001-6376-8939
[EN] A nanoclay/EVOH composite has been developed to retard the release of a volatile antimicrobial from an EVOH film with application in active packaging. Concretely, 2% of bentonite nanoclay was added to the EVOH-29 matrix to modify its mass transport properties and consequently the activity of the antimicrobial film. The nanocomposite obtained, containing 5% of carvacrol as antimicrobial compound, is characterized in terms of antimicrobial solubility and release, water vapor solubility and permeability, oxygen and carbon dioxide permeability, diffusivity and solubility, thermal properties, and microstructural morphology. The clay-filled EVOH-29 film had a similar macroscopic appearance to the unfilled film, thanks to the excellent dispersion of bentonite nanoparticles as revealed by TEM images. Glass transition temperature was higher in the modified material, whereas fusion temperature was slightly lower, although the differences found were not significant. Water vapor, oxygen, carbon dioxide, and carvacrol solubilities were found to be higher for the modified polymer, whereas water vapor permeability, carvacrol diffusivity, and oxygen and carbon dioxide permeabilities and diffusivities were found to be lower for the nanocomposite. All parameters, with the exception of water vapor permeability, increased with the water concentration in the polymeric matrix. Therefore, the incorporation of 2% bentonite nanoclay in EVOH-29 provides a significant improvement in the controlled release of the antimicrobial agent with no relevant drawbacks. (C) 2012 Elsevier B.V. All rights reserved., The authors thank the Spanish Ministry of Science and Innovation (project AGL2009-08776), EU (Nafispack project 212544), and Generalitat Valenciana (J.P.C. fellowship) for financial support and Mr. Karel Clapshaw (translation services).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Diffusion modeling in polymer-clay nanocomposites for food packaging applications through finite element analysis of TEM images

  • Cerisuelo Ferriols, Josep Pascual
  • Hernandez Muñoz, Maria Pilar
  • GAVARA CLEMENTE, RAFAEL|||0000-0001-6376-8939
[EN] Nanocomposites are novel materials increasingly used in the food packaging industry because of their enhanced properties with respect to unfilled polymers, more specifically in active packaging because of their great potential to retain and control active molecules release into the preserved food. The estimation of the improvement achieved in barrier or retention properties is usually performed through the calculation of relative diffusivity, through application of theoretical models. However, their results are disparate and quite inaccurate when working with nanocomposites with low values of volume fraction and aspect ratio of particles. The method presented in this work is based on the mathematical modeling and simulation of diffusion processes, and, unlike the previous models, it only requires as input some TEM micrographs of actual polymer nanocomposites. By subjecting such micrographs to image and finite element analysis the model can yield accurate values of relative diffusivity. EVOH-29 and zein matrices with 1 or 2% of bentonite nanoparticles were employed to validate the model, with average reductions from 3.8 to 12.2% in their solute diffusivities. In spite of possible size effects of diffusing molecules, not considered in the model, values were in agreement with experimental data obtained from permeability measurements, validating the propounded method. (C) 2015 Elsevier B.V. All rights reserved., The authors are grateful to the Spanish Ministry of Science and Innovation (project AGL2009-08776, AGL2012-39920-C03-01), EU (Nafispack project 212544), and Generalitat Valenciana (J.P.C. fellowship) for financial support, to HINE (CSIC associate Unit) for technical collaboration, and to Mr. Tim Swillens (language correction services).