Pasar al contenido principal

NUEVOS SISTEMAS DE ENVASADO ACTIVO ALIMENTARIO BASADOS EN MATERIALES POLIMERICOS O HIBRIDOS CON CAPACIDAD PARA LA LIBERACION CONTROLADA Y SOSTENIDA DE AGENTES ACTIVOS

AGL2009-08776

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación Fundamental no Orientada
Convocatoria Proyectos I+D
Año convocatoria 2009
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 30
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Describing and modeling the release of an antimicrobial agent from an active PP/EVOH/PP package for salmon

  • Cerisuelo Ferriols, Josep Pascual
  • Bermúdez, José M.
  • Aucejo, Susana
  • Catalá, Ramón
  • Hernandez Muñoz, Maria Pilar
  • GAVARA CLEMENTE, RAFAEL|||0000-0001-6376-8939
[EN] Natural antimicrobial active packaging is an emerging technology for fresh fish preservation in which a chemical compound of natural origin is purposely incorporated into a packaging material to be released into the food surface in order to protect it from spoilage by foodborne microorganisms. The maximum efficiency of an antimicrobial package can only be obtained when an adequate activity is achieved immediately after the packaging operation and is maintained constant throughout the product's shelf life. This work develops an active package designed for the preservation of fresh farmed salmon in cubes or slices, made up of a rigid polypropylene (PP)/ethylene-vinyl alcohol copolymer (EVOH)/PP tray heat-sealed with an active PP/EVOH/PP film lid in which 6.5% carvacrol is incorporated in the EVOH kernel as an antimicrobial active agent. The work also includes the measurement of the carvacrol kinetics and equilibrium parameters in the preserved salmon fillets, and proposes a mathematical model based on the finite element method to describe and simulate the common performance of the developed package/food system, and to predict its behavior under different working conditions or system configurations with the objective of finding the optimum combination of variables that ensure the best packaging performance. The results obtained from the determination of parameters showed a rapid migration of the active compound through the fish muscle, and a low affinity of the agent molecules for the food matrix. The active package was successfully developed, and the proposed model was satisfactorily used to detect the key factors that govern the package performance, and also to improve the package design by modifying the thickness distribution of the multilayer active film. (C) 2013 Elsevier Ltd. All rights reserved., The authors are grateful to the Spanish Ministry of Science and Innovation (Project AGL2009-08776), EU (Nafispack Project 212544), and Generalitat Valenciana (J.P.C. fellowship) for financial support, and to Mr. Karel Clapshaw (translation services).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Food applications of active packaging EVOH films containing cyclodextrins for the preferential scavenging of undesirable compounds

  • López-De-Dicastillo, Carol
  • Catala Moragrega, Ramón
  • Hernandez Muñoz, Maria Pilar
  • GAVARA CLEMENTE, RAFAEL|||0000-0001-6376-8939
[EN] Novel ethylene-vinyl alcohol copolymer (EVOH) films containing beta-cyclodextrins (beta CD) with potential application in active food packaging have been tested as materials for the preferential retention of undesired food components. The films were immersed on pasteurized milk and UHT milk and stored at 4 and 23 degrees C, respectively. The films containing beta CD presented a significant reduction in cholesterol concentration, achieving a 23% reduction in UHT milk exposed to EVOH films containing 30% beta CD. Despite the immobilization of the beta CD and the large molecular size of cholesterol, 15% of the beta CD molecules added to the films were involved in the formation of beta CD/cholesterol inclusion complexes. In another set of experiments, the films were used to reduce the presence of aldehydes (substances which develop as a result of oxidative processes) in packaged fried peanuts. The films containing beta CD brought a significant reduction in hexanal, reaching a 50% decrease over short periods (1-5 weeks). At longer storage times (10 weeks) the retention capacity of the developed films was exhausted and no differences were observed between the samples. (C) 2011 Elsevier Ltd. All rights reserved., The authors are grateful for the financial support of the Spanish Ministry of Science and Innovation, projects AGL2006-02176, AGL2009-08776 and Fun-C-Food CSD2007-00063, and of the C.L-d-D fellowship (FPU program). Mary Georgina Hardinge provided assistance with the English language text.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Mass transport properties of gliadin films: Effect of cross-linking degree, relative humidity, and temperature

  • Balaguer, Mari Pau
  • Cerisuelo Ferriols, Josep Pascual
  • Hernandez Muñoz, Maria Pilar
  • GAVARA CLEMENTE, RAFAEL|||0000-0001-6376-8939
[EN] The degree of cross-linking of gliadin films was increased by chemical treatment with cinnamaldehyde. The formation of a more reticulated network was able to achieve a simultaneous reduction of water vapor, oxygen, and carbon dioxide permeabilities, enhancing barrier properties by up to 64%, 75%, and 79%, respectively. The evaluation of solubility and diffusivity coefficients involved in water vapor permeation highlights the complexity of the mechanisms implicated in water transport through hydrophilic films. Water vapor sorption isotherms followed a non-linear profile, which was fitted with the D'Arcy and Watt model. Water vapor diffusivity was concentration-dependent, being affected by plasticization and water clustering. Temperature-dependence of water vapor permeability showed a discontinuous behavior when the Arrhenius law was applied, indicating possible changes in the matrix structure. Oxygen permeability was positively influenced by relative humidity and temperature. The higher selectivity to carbon dioxide permeation in comparison with oxygen diminished as the water content of the film increased, which is in accordance with the loss of barrier properties at high relative humidities. This study underlines the importance of the evaluation of environmental conditions during end-use applications in order to optimize the performance of biopolymer-based films. (C) 2012 Elsevier B.V. All rights reserved., The authors acknowledge financial support given by the Spanish Ministry of Science and Innovation (Project AGL2006-02176, AGL2009-08776 and M.P. Balaguer FPI fellowship). The authors wish to thank Dr. J. Gomez-Estaca for his assistance.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Silver Ions Release from Antibacterial Chitosan Films Containing in Situ Generated Silver Nanoparticles

  • López Carballo, Gracia
  • Higueras, Laura
  • Hernández Muñoz, Pilar
  • GAVARA CLEMENTE, RAFAEL|||0000-0001-6376-8939
[EN] This study aims to develop antimicrobial films consisting of chitosan and silver nanoparticles that are homogeneously distributed throughout the polymer matrix. Nanoparticles were generated in situ during the neutralization of the chitosan acetate film with sodium hydroxide. The temperature of neutralization and the concentration of silver in the film were crucial determinants of the shape and size of the nanoparticles. Neutralized films exhibited antimicrobial activity against Escherichia coli and Staphylococcus aureus in liquid growth media. However, the effectiveness of the films was considerably greater in diluted growth media. Furthermore, no significant differences were found either in the antimicrobial capacities of films incorporating different amounts of silver or in the amount of silver that migrated into the liquid media after 18 h of immersion of the film. Neutralized films maintained their activity after 1 month of immersion in deionized water, which can be attributed to the slow sustained release of silver ions and thus efficacy over time., We thank the Spanish MICINN for financial support through Projects AGL-2009-08776 and Ingenio-Consolider CSD2007-00063 and the JAE program from CSIC (L.H. fellowship).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Natural Antimicrobial - Containing EVOH Coatings on PP and PET Films: Functional and Active Property Characterization

  • Gavara Clemente, Rafael
  • Cerisuelo Ferriols, José Pascual
  • Hernández Muñoz, Pilar
[EN] Natural antimicrobials are currently being tested by many researchers for active packaging applications as a response to consumer demands for safer food products. In previous work, several packaging materials consisting of ethylene vinyl alcohol (EVOH)-coated polypropylene (PP) films containing essential oils or their constituents as active agents were successfully developed and tested for antimicrobial activity. In this work, selected films from those materials, namely EVOH coatings with carvacrol, citral, marjoram essential oil, or cinnamon bark essential oil, on PP and polyethylene terephthalate (PET) substrates, were subjected to diverse physicochemical analyses in order to assess their suitability for food packaging applications. Concretely, the investigated properties were the stability of EVOH coatings on PP and PET substrates, the retainability of EVOH matrices for active compounds, the mechanical, optical, surface and barrier properties of the final active films and the effects of a matrix modification based on the addition of bentonite nanoclay on the performance of PP/EVOH active packages studied in actual working conditions. Results showed that the application of corona discharge followed by a polyethyleneimine-based primer was the best anchorage treatment available to stabilize EVOH coatings on PP and PET substrates. Furthermore, they demonstrated that the retention of active agents into EVOH matrices ranged from low to moderate, depending on the embedded substance, and that their presence into an EVOH coating in the final multilayer films did not noticeably affect their mechanical, optical or barrier properties, although it considerably improved their wettability. They also indicated that the inclusion of bentonite nanoparticles into their carrier layers substantially enhanced the performance of the final packages, while maintaining or slightly improving their other physical properties. Hence, as a conclusion, all the assayed multilayer films were considered perfectly valid for food packaging applications, and the incorporation of bentonite nanoclay to their carrier layers was also highly recommended. Copyright (c) 2014 John Wiley & Sons, Ltd., The authors thank the Spanish Ministry of Science and Innovation (projects AGL2009-08776 and AGL2012-39920-C03-01), European Commission (Nafispack project 212544) and Generalitat Valenciana (Josep P. Cerisuelo fellowship) for financial support, Instituto Tecnologico del Embalaje, Transporte y Logistica (associated unit of Consejo Superior de Investigaciones Cientificas) for scientific collaboration and Mr. Tim Swillens for correction services.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Chemically modified gliadins as sustained release systems for lysozyme

  • Fajardo, Paula
  • Balaguer Grimaldo, María de la Paz
  • Gómez Estaca, Joaquin
  • Gavara Clemente, Rafael
  • Hernandez Muñoz, Maria Pilar
[EN] The aim of this work has been to study the effectiveness of gliadin films cross-linked with cinnamaldehyde as systems for the release of the natural antimicrobial compound lysozyme. Prior to the incorporation of lysozyme, the gliadin film-forming solution was treated with different percentages of cinnamaldehyde as cross-linker, and glycerol was added as plasticizer. The effect of the concentration of the cross-linker on the swelling capacity and kinetics of release of the antimicrobial agent from the protein matrix was evaluated at pH 6.2. The antimicrobial activity of the films was assayed against Listeria innocua. The gliadin films cross-linked with cinnamaldehyde incorporating lysozyme preserved their integrity in water. The release rate of the antimicrobial agent was controlled by the reticulation of the protein matrix, thus a greater degree of cross-linking led to slower release of the active agent. Films with a loosely cross-linked structure released a greater amount of lysozyme, exhibiting greater antimicrobial activity. (C) 2014 Elsevier Ltd. All rights reserved., The authors would like to thank the Spanish Ministry of Science and Innovation (Projects AGL2009-08776 and CONSOLIDER-INGENIO CSD2007-00063 and Mari Pau Balaguer pre-doctoral FPI fellowship) and Xunta de Galicia (Plan Galego de Investigacion, Desenvolvemento e Innovacion Tecnoloxica - INCITE 2006-2010 Paula Fajardo post-doctoral fellowship) for financial support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Development of Active Polyvinyl Alcohol/beta-Cyclodextrin Composites To Scavenge Undesirable Food Components

  • López de Dicastillo Bergamo, Ana Carolina
  • Jordá, María
  • Catala Moragrega, Ramón
  • Gavara Clemente, Rafael
  • Hernandez-Munoz, Pilar
[EN] Active food packaging systems based on the incorporation of agents into polymeric package walls are being designed to purposely release or retain compounds to maintain or even increase food quality. The objective of this work was to develop polyvinyl alcohol (PVOH)/ß-cyclodextrin (ßCD) composite films that can be applied to reduce undesirable component content such as cholesterol in foods through active retention of the compounds in the package walls during storage. Cyclodextrins were added to PVOH in a proportion of 1:1 and cross-linked with glyoxal under acidic media to reduce its water-soluble character. Three different cross-linking procedures were used: cross-linking of the polymer/polysaccharide mixture in solution and film casting, PVOH. ßCD*; cross-linking of the polymer, addition of ßCD, and casting of the mixture, PVOH*.CD; and casting of a PVOH film, addition of a ßCD/glyoxal solution onto the film, and cross-linking during drying, PVOH.CD*. Characterization studies showed that the PVOH*.CD and PVOH.CD* films provided the best physical characteristics with the lowest release values and the highest barrier properties. As a potential application, materials were tested as potential cholesterol-scavenging films. There was a significant reduction in the cholesterol concentration in milk samples when they were exposed to the materials developed., We acknowledge the financial support of the Spanish Ministry of Science and Innovation, Projects AGL2006-02176, AGL2009-08776, and Fun-C-Food CSD2007-00063, and the C.L.-d.-D.fellowship (FPU program).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Antimicrobial food packaging film based on the release of LAE from EVOH

  • Muriel Galet, Virginia
  • López Carballo, Gracia
  • Hernandez Muñoz, Maria Pilar
  • GAVARA CLEMENTE, RAFAEL|||0000-0001-6376-8939
[EN] The aim of this work was to develop antimicrobial films for active packaging applications containing the natural antimicrobial compound LAE (lauramide arginine ethyl ester) in EVOH copolymers with different mol % ethylene contents (i.e. EVOH-29 and EVOH-44). EVOH-29 and EVOH-44 films were made by casting and incorporating 0.25%, 1%, 5%, and 10% LAE in the film forming solution (w/w with respect to polymer weight). Previously, the minimum inhibitory concentration (MIC) and the minimum bactericidal concentration (MBC) of LAE against Listeria monocytogenes, Escherichia coli, and Salmonella enterica were determined by a microdilution assay. The antimicrobial activity of the resulting films was tested in vitro against these microorganisms in liquid culture media. The activity of the films was also evaluated over time. The results showed that films containing 5% and 10% LAE produced total growth inhibition and viable counts decreased with 0.25% and 1% LAE. Finally, the effectiveness of the films was tested by applying them to an infant formula milk inoculated with L monocytogenes and S. enterica and stored for 6 days at 4 degrees C. The application of films with LAE to infant formula milk inoculated with L monocytogenes reduced at the end of storage period about 4 log in case of 10% LAE and with S. enterica reduced 3.74 log and 3.95 log with EVOH 29 5% and 10%, respectively, and EVOH-44 5% and 10% LAE reduced 1 log and 3.27 log, respectively, at the end of storage. The antimicrobial capacity of EVOH-29 films was greater than that of EVOH-44 films in all the cases tested. In general, the films were more effective in inhibiting the growth of L monocytogenes than S. enterica, this inhibition being more acute at the end of the storage time. (C) 2012 Elsevier B.V. All rights reserved., The authors acknowledge the financial support of the Spanish Ministry of Science and Innovation, project AGL2009-08776, and V. M.-G.'s fellowship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Preparation and characterization of chitosan/HP-beta-cyclodextrins composites with high sorption capacity for carvacrol

  • Higueras, Laura
  • López Carballo, Gracia
  • Cerisuelo, Josep P.
  • Hernández Muñoz, Pilar
  • GAVARA CLEMENTE, RAFAEL|||0000-0001-6376-8939
[EN] The aim of this work was to design new polymer-based systems exhibiting an adjustable loading capacity of carvacrol depending on the film formulation. For this purpose, biocomposite films were developed employing chitosan (CS) as the polymer matrix and hydroxypropyl--cyclodextrins (HP-CDs) as an adjuvant to improve the sorption of carvacrol in the polymer matrix. The morphology, optical, mechanical and barrier properties of the resulting films were investigated, and the sorption capacity of carvacrol evaluated. Biocomposites resulted highly transparent with higher mechanical resistance and moisture barrier properties. Sorption of carvacrol was greatly affected by the humidity (RH) and glycerol (G) content of the biocomposites. The highest sorption values were achieved for composites incorporating 35% glycerol and conditioned at 75% these composites retained 216% carvacrol (g/100 g dry matter). These results indicate that inclusion of carvacrol in the films could be occurring by mechanisms other than formation of inclusion complexes., Authors thank the financial support of the Spanish Ministry of Science and Innovation (projects AGL2009-08776), JAE program from CSIC (L.H. fellowship), Generalitat Valenciana (J.P.C. fellowship).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Functional properties and antifungal activity of films based on gliadins containing cinnamaldehyde and natamycin

  • Balaguer, Mari Pau
  • Fajardo, Paula
  • Gartner, Hunter
  • Gómez Estaca, Joaquin
  • Almenar, Eva
  • Hernandez Muñoz, Maria Pilar
  • GAVARA CLEMENTE, RAFAEL|||0000-0001-6376-8939
[EN] Gliadin films cross-linked with cinnamaldehyde (1.5, 3, and 5%) and incorporated with natamycin (0.5%) were prepared by casting, and their antifungal activity, water resistance, and barrier properties were characterized. Incorporation of natamycin gave rise to films with greater water uptake, weight loss and diameter gain, and higher water vapor and oxygen permeabilities. These results may be associated to a looser packing of the protein chains as a consequence of the presence of natamycin. The different cross-linking degree of the matrices influenced the natamycin migration to the agar test media, increasing from 13.3 to 23.7 (mu g/g of film) as the percentage of cinnamaldehyde was reduced from 5% to 1.5%. Antifungal activity of films was assayed against common food spoilage fungi (Penicillium species, Alternaria solani, Colletotrichum acutatum). The greatest effectiveness was obtained for films containing natamycin and treated with 5% of cinnamaldehyde. The level of cinnamaldehyde reached in the head-space of the test assay showed a diminishing trend as a function of time, which was in agreement with fungal growth and cinnamaldehyde metabolization. Developed active films were used in the packaging of cheese slices showing promising results for their application in active packaging against food spoilage. (C) 2013 Published by Elsevier B.V., The authors would like to thank the Spanish Ministry of Science and Innovation (Projects AGL2009-08776 and Mari Pau Balaguer pre-doctoral FPI fellowship) and Xunta de Galicia (Plan Galego de Investigacion, Desenvolvemento e Innovacion Tecnoloxica-INCITE 2006-2010 Paula Fajardo postdoctoral fellowship) for financial support of this work. The authors also thank Drs. Randolph Beaudry and Jonh W. Frost of Michigan State University, for fruitful discussion of the GC/MS results and the metabolization of cinnamaldehyde, respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Functional Properties of Bioplastics Made from Wheat Gliadins Modified with Cinnamaldehyde

  • Balaguer, M. Pau
  • Gomez-Estaca, Joaquin
  • Gavara Clemente, Rafael
  • Hernandez-Munoz, Pilar
[EN] Cinnamaldehyde is a naturally occurring alpha,beta-unsaturated aldehyde. Its potential as a natural cross-linker to improve the physical performance of cast wheat gliadin films was evaluated. The cross-linking reaction was found to be dependent on the pH of the reaction medium, with pH 2 as the optimum. The water resistance (weight loss after immersion), mechanical properties (Young's modulus, tensile strength and elongation at break), thermal properties (T-g and decomposition behavior), optical properties and morphology of films were evaluated. Cross-linked films showed high transparency, maintained their integrity after immersion, and displayed significant improvements in tensile strength and Young's modulus without impairment of their elongation properties. These effects, which were proportional to the amount of cinnamaldehyde added, highlight the possible formation of intermolecular covalent bonds between "monomeric" gliadins, leading to a polymerized network. Thus, this treatment could provide a new alternative to the toxic cross-linkers commonly employed and so extend the use of gliadin films., The authors would like to thank the Spanish Ministry of Science and Innovation for the financial support (Project AGL2006-02176, AGL2009-08776 and M. P. Balaguer FPI fellowship).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Reducing Oxidation of Foods Through Antioxidant Active Packaging Based on Ethyl Vinyl Alcohol and Natural Flavonoids

  • López de Dicastillo Bergamo, Ana Carolina
  • Pezo, Davinson
  • Nerín, Cristina
  • López Carballo, Gracia
  • Catalá, Ramón
  • Hernandez Muñoz, Maria Pilar
  • GAVARA CLEMENTE, RAFAEL|||0000-0001-6376-8939
[EN] The development of antioxidant active packaging systems is attracting considerable attention as one of the preferred emerging technologies for reducing the incidence of lipid peroxidation. This work presents the use of ethylene vinyl alcohol copolymer films containing two natural flavonoids, catechin and quercetin, to reduce the oxidation of food. In a series of experiments, these materials showed their ability to reduce the presence of hydroxyl radicals in the package headspace. Packaging fried peanuts in bags manufactured with these active films resulted in a large reduction in the presence of hexanal, a compound produced during peroxidation of the unsaturated fat in peanuts. The results indicated that the materials actively reduced the presence of radical oxidative species although the antioxidants are not released into the food. On exposing sunflower oil to the films, the peroxide values obtained showed that the films actively protected the oil; because of the higher solubility of quercetin in this food product as well as the higher antioxidant capacity, the samples containing this flavonoid were more efficient. Industrial relevance: Active packaging is receiving considerable attention as an emerging technology that can be used to improve the quality and the stability of food, reducing the direct addition of chemicals and the need for changes in formulation. The results of this study show that it is possible to reduce food oxidation without adding antioxidants to the food. The films obtained can be used to protect any type of food, including dry or fatty products. Copyright (c) 2012 John Wiley & Sons, Ltd., The authors acknowledge the financial support of the Spanish Ministry of Science and Innovation, projects AGL2006-02176, AGL2009-08776 and Fun-C-Food CSD2007-00063, and the C. L-d-D fellowship (FPU programme). Mary Georgina Hardinge provided assistance with English-language editing.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Development of New Antioxidant Active Packaging Films Based on Ethylene Vinyl Alcohol Copolymer (EVOH) and Green Tea Extract

  • López de Dicastillo Bergamo, Ana Carolina
  • Nerín De la Puerta, Cristina
  • Alfaro, Pilar
  • Catala Moragrega, Ramón
  • Gavara Clemente, Rafael
  • Hernández-Muñoz, Pilar
[EN] Ethylene vinyl alcohol copolymer (EVOH) films containing green tea extract were successfully produced by extrusion. The films were brown and translucent, and the addition of the extract increased the water and oxygen barrier at low relative humidity but increased the water sensitivity, the glass transition temperature, and the crystallinity of the films and improved their thermal resistance. An analysis by HPLC revealed that the antioxidant components of the extract suffered partial degradation during extrusion, reducing the content of catechin gallates and increasing the concentration of free gallic acid. Exposure of the films to various food simulants showed that the liquid simulants increased their capacity to reduce DPPH¿ and ABTS¿+ radicals. The release of green tea extract components into the simulant monitored by HPLC showed that all compounds present in the green tea extract were partially released, although the extent and kinetics of release were dependent on the type of food. In aqueous food simulants, gallic acid was the main antioxidant component released with partition coefficient values ca. 200. In 95% ethanol (fatty food simulant) the K value for gallic acid decreased to 8 and there was a substantial contribution of catechins (K in the 1000 range) to a greatly increased antioxidant efficiency. Kinetically, gallic acid was released more quickly than catechins, owing to its faster diffusivity in the polymer matrix as a consequence of its smaller molecular size, although the most relevant effect is the plasticization of the matrix by alcohol, increasing the diffusion coefficient >10-fold. Therefore, the materials here developed with the combination of antioxidant substances that constitute the green tea extract could be used in the design of antioxidant active packaging for all type of foods, from aqueous to fatty products, the compounds responsible for the protection being those with the higher compatibility with the packaged product., We acknowledge the financial support of the Spanish Ministry of Science and Innovation, Projects AGL2006-02176, AGL2009-08776, and Fun-C-Food CSD2007-00063, and the C.L.d.D. fellowship (FPU program).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Active antioxidant packaging films: Development and effect on lipid stability of brined sardines

  • López de Dicastillo Bergamo, Ana Carolina
  • Gómez Estaca, Joaquin
  • Catala Moragrega, Ramón
  • Hernandez Muñoz, Maria Pilar
  • GAVARA CLEMENTE, RAFAEL|||0000-0001-6376-8939
[EN] Active antioxidant food packaging films were produced by the incorporation of ascorbic acid, ferulic acid, quercetin, and green tea extract into an ethylene vinyl alcohol copolymer (EVOH) matrix. The characterisation of the thermal and barrier properties of the developed film showed that the addition of these bioactive compounds did not greatly modify their properties. However, the presence of ascorbic and ferulic acids resulted in a significant decrease in water vapour permeability, possibly due to the high affinity for water of these substances. Exposure of the films to various food simulants showed that the release from the films was dependent on the type of food simulant and the antioxidant incorporated: in the aqueous food simulant, materials containing ascorbic acid produced the largest release; in the fatty food simulant, quercetin and green tea extract presented the best performance. The efficiency of the films developed was determined by real packaging applications of brined sardines. The evolution of the peroxide index and the malondialdehyde content showed that, in general, the films improved sardine stability. Films with green tea extract offered the best protection against lipid oxidation. (C) 2011 Elsevier Ltd. All rights reserved., The authors acknowledge the financial support of the Spanish Ministry of Science and Innovation, Projects AGL2006-02176, AGL2009-08776 and Fun-C-Food CSD2007-00063, and the C.L.-d-D. fellowship (FPU Programme). Karel Clapshaw provided assistance with the English language text.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Retention and Release of Cinnamaldehyde from Wheat Protein Matrices

  • Balaguer, Mari Pau
  • Borne, Mathilde
  • Chalier, Pascale
  • Gontard, Nathalie
  • Morel, Marie-Helene
  • Peyron, Stephane
  • Gavara Clemente, Rafael
  • Hernández Muñoz, Pilar
[EN] Cinnamaldehyde treatment of gliadin films provided a means of decreasing their solubility, increasing their molecular weight profile, and reducing their overall migration into food simulants as a consequence of the high degree of polymerization achieved. Despite losses incurred in the film manufacturing process, and the amount that remained covalently bonded with protein because of cross-linking, the addition of 1.5, 3, and 5% of cinnamaldehyde (g/100 g protein) to gliadins at pH 2 rendered 1.8, 4.8, and 11.0 mg cinnamaldehyde/g film, respectively, available to be released, and therefore to exert antimicrobial activity. Cinnamaldehyde diffusivity was largely dependent on environmental conditions, increasing from 0.49 x 10(-15) m(2)/s at 30% relative humidity (RH) to 13.1 X 10(-15) m(2)/s at 90% RH and 23 degrees C. This water sensitivity of films provides a mechanism with a noteworthy potential to retain the compound before its use, to trigger its release when needed, and to modulate the release rate according to the product humidity., The authors would like to thank the Spanish Ministry of Science and Innovation for financial support (Project AGL2009-08776 and M.P.B.'s FPI fellowship).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Improving the Antioxidant Protection of Packaged Food by Incorporating Natural Flavonoids into Ethylene-Vinyl Alcohol Copolymer (EVOH) Films

  • Lopez-de-Dicastillo, Carol
  • Alonso, Jose M.
  • Catala Moragrega, Ramón
  • Hernandez-Muñoz, Pilar
  • GAVARA CLEMENTE, RAFAEL|||0000-0001-6376-8939
[EN] Ethylene-vinyl alcohol copolymer (EVOH) films containing catechin or quercetin as antioxidant agents were successfully produced by extrusion. The addition of these bioactive compounds did not modify greatly their water and oxygen permeabilities, T-g, or crystallinity but improved their thermal resistance. Exposure of the films to different food simulants showed that both compounds were released, although the extent and kinetics of release were dependent on the type of food. In aqueous and alcoholic food simulants their release was greater in the case of the catechin-containing samples. Exposure of the films to isooctane and ethanol 95% (fatty food simulants) provided controversial results; no release was observed in isooctane, whereas both bioactive compounds were extracted by ethanol due to their high solubility in alcohol and the plasticizing effect of ethanol on the polymer. Packaging applications of these films can improve food stability and provide a method for adding such bioactive compounds., Received for review June 10, 2010. Revised manuscript received August 24, 2010. Accepted September 16, 2010. We acknowledge the financial support of the Spanish Ministry of Science and Innovation, Projects AGL2006-02176, AGL2009-08776, and Fun-C-Food CSD2007-00063, and the C.L.-d.-D. fellowship (FPU program).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Biochemical Properties of Bioplastics Made from Wheat Gliadins Cross-Linked with Cinnamaldehyde

  • Pau Balaguer, M.
  • Gomez-Estaca, Joaquin
  • Gavara Clemente, Rafael
  • Hernandez-Munoz, Pilar
[EN] The aim of this work has been to study the modification of gliadin films with cinnamaldehyde as a potential crosslinker agent. The molecular weight profile and cross-linking density showed that cinnamaldehyde increased reticulation in the resulting films. The participation of free amino groups of the protein in the newly created entanglements could be a possible mechanism of connection between the polypeptidic chains. The combination of a Schiff base and a Michael addition is a feasible approach to understanding this mechanism. The protein solubility in different media pointed to lower participation by both noncovalent and disulfide bonds in stabilizing the structure of the cross-linked films. The new covalent bonds formed by the cinnamaldehyde treatment hampered water absorption and weight loss, leading to more water-resistant matrices which had not disintegrated after 5 months. The properties of this novel bioplastic could be modified to suit the intended application by using cinnamaldehyde, a naturally occurring compound., We thank the Spanish Ministry of Science and Innovation for financial support (Projects AGL2006-02176 and AGL2009-08776 and M.P.B.'s FPI fellowship).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Antifungal properties of gliadin films incorporating cinnamaldehyde and application in active food packaging of bread and cheese spread foodstuffs

  • Balaguer, Mari Pau
  • López Carballo, Gracia
  • Catala, Ramón
  • Hernandez Muñoz, Maria Pilar
  • GAVARA CLEMENTE, RAFAEL|||0000-0001-6376-8939
[EN] Gliadin films incorporating 1.5, 3 and 5% cinnamaldehyde (g/100 g protein) were tested against food-spoilage fungi Penicillium expansum and Aspergillus niger in vitro, and were employed in an active food packaging system for sliced bread and cheese spread. Gliadin films incorporating cinnamaldehyde were highly effective against fungal growth. P. expansum and A. niger were completely inhibited after storage in vitro for 10 days in the presence of films incorporating 3% cinnamaldehyde. Indeed 1.5% cinnamaldehyde was sufficient in the case of P. expansum. The amount of cinnamaldehyde retained in films after storage for 45 days at 20 degrees C and 0% RH was also sufficient in most cases to prevent fungal growth in vitro. Active food packaging with gliadin films incorporating 5% cinnamaldehyde increased the shelf-life of both sliced bread and cheese spread. Mold growth was observed on sliced bread after 27 days of storage at 23 degrees C with active packaging, whereas in the control bread packaged without the active film fungal growth appeared around the fourth day. In the cheese spread, no fungi were observed after 26 days of storage at 4 degrees C when the product was packaged with the active film. However, growth of fungi was observed in control packaged cheese after 16 days of storage. This work demonstrates a noteworthy potential of these novel bioplastics incorporating natural antimicrobial compounds as innovative solutions to be used in active food packaging to extend shelf-life of food products. (C) 2013 Elsevier B.V. All rights reserved., The authors would like to thank the Spanish Ministry of Science and Innovation for financial support (project AGL2009-08776 and M.P. Balaguer's FPI fellowship). The authors wish to thank Dr. Andrew MacCabe for critical reading of the paper, and Joan Villanova for his assistance.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Development of antimicrobial films for microbiological control of packaged salad

  • Muriel Galet, Virginia
  • Cerisuelo, Josep P.
  • López Carballo, Gracia
  • Lara, Marta
  • Hernandez Muñoz, Maria Pilar
  • GAVARA CLEMENTE, RAFAEL|||0000-0001-6376-8939
[EN] The aim of the present work was to characterize the antimicrobial efficiency of films consisting of PP/EVOH structures with oregano essential oil and citral. Both substances are known for their antimicrobial activity based on their interaction with the cell membrane. The films developed were used to pack minimally processed salads, combining modified atmosphere technology to extend shelf-life and active packaging technology to reduce possible microbiological risks. The antimicrobial activity of the films against the pathogenic microorganisms Escherichia coli, Salmonella enterica and Listeria monocytogenes and natural microflora was investigated "in vitro" and also on the food itself. The effect of release of the antimicrobial agent on the sensory characteristics of the salad was also studied. The results showed that antimicrobial activity reduced spoilage flora on the salad as well as inhibited the growth of pathogens in contaminated salads. This effect was greater against Gram-negative bacteria. Sensory studies showed that the package that was most effective and most accepted by customers was the one containing 5% oregano essential oil. (C) 2012 Elsevier B.V. All rights reserved., The authors acknowledge the financial support of the Spanish Ministry of Science and Innovation, project AGL2009-08776, V. M.-G.'s fellowship from the Generalitat Valenciana, and J. P.-C.'s fellowship from the European Commission, Nafispack Project.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Advances in antioxidant active food packaging

  • Gómez Estaca, Joaquin
  • López de Dicastillo Bergamo, Ana Carolina
  • Hernandez Muñoz, Maria Pilar
  • Catalá, Ramón
  • GAVARA CLEMENTE, RAFAEL|||0000-0001-6376-8939
[EN] Lipid oxidation is, together with microbial growth, the main cause of spoilage of a great variety of foods, such as nuts, fish, meats, whole milk powders, sauces and oils. It causes a loss of both sensorial and nutritional quality of foods and may even lead to the formation of toxic aldehydes. Some strategies that are commonly used to limit the extent of lipid oxidation of packaged foods are direct addition of antioxidants or packaging under modified atmospheres in which oxygen presence is limited. A novel alternative to these methods is antioxidant active packaging, whose main advantage is that it can provide sustained release of antioxidants during storage. This article reviews the latest advances in antioxidant active food packaging, with special emphasis on antioxidant release systems. The various methods for incorporating antioxidant compounds in the package, the issues to be considered in packaging design, and the various methods employed to date to evaluate the antioxidant effectiveness of active antioxidant materials are reviewed., The authors are grateful for the financial support of the Spanish Ministry of Science and Innovation, projects AGL2009-08776 and Fun-C-Food CSD2007-00063. Karel Clapshaw provided assistance with the English language text.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Mathematical model to describe the release of an antimicrobial agent from an active package constituted by carvacrol in a hydrophilic EVOH coating on a PP film

  • Cerisuelo Ferriols, Josep Pascual
  • Muriel Galet, Virginia
  • Bermúdez, José M.
  • Aucejo, Susana
  • Catala Moragrega, Ramón
  • Hernandez Muñoz, Maria Pilar
  • GAVARA CLEMENTE, RAFAEL|||0000-0001-6376-8939
[EN] Antimicrobial active packaging is a novel technology in which a chemical compound (or mixture) is purposely incorporated into a packaging material to be released into the food to protect it from deterioration. The effectiveness of an antimicrobial package is strongly related to the balance between the controlled release of the active compound and microbial growth kinetics. This work characterizes and models the release of carvacrol from an EVOH coating on a PP film which can be employed as an active packaging system. The kinetics and extent of carvacrol mass transport within the packaging components were fully characterized as a function of relative humidity. As expected, water uptake by the EVOH coating acts as a triggering mechanism for activity. The partition equilibrium for carvacrol in the complex film largely favors (10,000-fold) the EVOH layer in dry conditions, although in humid conditions the solubility in both polymers is very close (4-fold). Kinetically, the presence of humidity increases the value of D for carvacrol in EVOH from 3 . 10(-19) m(2)/s in dry conditions to 3 . 10(-15) m(2)/s in a wet environment. After the experimental characterization of carvacrol transport, the efficiency of the release of carvacrol was estimated with a novel mathematical model based on the finite element method and successfully compared with the evolution of carvacrol concentration in a real packaging system. The model developed can be employed in the optimization of package design in order to ensure the maintenance of a specific concentration of the active agent in the headspace, high enough to prevent potential growth of a particular foodborne spoiling or pathogenic microorganism on the preserved foodstuffs. This model could easily be extended to similar packaging systems as long as an inventory of experimental data for all the parameters and coefficients involved is available, sufficiently complete to fulfill all the mathematical requirements demanded by the model. (C) 2011 Elsevier Ltd. All rights reserved., Authors thank the financial support of the Spanish Ministry of Science and Innovation (Projects AGL2006-02176 and AGL2009-08776), EU (Nafispack Project 212544), Generalitat Valenciana (J.P.C. fellowship) and Mr. Karel Clapshaw (translation services).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Food aroma mass transport properties in renewable hydrophilic polymers

  • Balaguer, M. Pau
  • Gavara Clemente, Rafael
  • Hernández Muñoz, Pilar
[EN] The sorption and transport properties of gliadin and chitosan films with respect to four representative food aroma components (ethyl caproate, 1-hexanol, 2-nonanone and α-pinene) have been studied under dry and wet environmental conditions. The partition coefficients (K) of the selected volatiles were also obtained using isooctane and soybean oil as fatty food simulants. The results showed that gliadin and chitosan films have very low capacities for the sorption of volatile compounds, and these capacities are influenced by the nature of the sorbate, the environmental relative humidity and the presence of glycerol as a plasticizer in the polymeric matrix. The volatile compounds also present a low partitioning in the biopolymer film/food stimulant system. Given the low levels of interaction observed with the volatiles, gliadin and chitosan films are of potential interest for the packaging of foods in which aroma is one of the most important quality attributes Highlights ► Sorption kinetics and equilibrium partitioning of food aroma compounds in bioplastics. ► Gliadin and chitosan films show low sorption and partitioning capacities of food aroma compounds. ► Sorption and diffusion depend on volatile chemical structure, film composition and moisture. ► Great potential in packaging of foods in which aroma is an important quality attribute., This research has been supported from the Spanish Ministry of Science and Innovation through the Projects AGL2006-02176, AGL2009-08776 and FUN-C-FOOD Consolider Ingenio. The authors would like to thank A.P. Mac Cabe for critical reading of the manuscript.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Development of a novel antimicrobial film based on chitosan with LAE (ethyl-N alpha-dodecanoyl-L-arginate) and its application to fresh chicken

  • Higueras, Laura
  • López Carballo, Gracia
  • Hernandez Muñoz, Maria Pilar
  • Rollini, Manuela Silvia
  • GAVARA CLEMENTE, RAFAEL|||0000-0001-6376-8939
[EN] Chitosan (CS) films incorporating the antimicrobial compound ethyl-N-alpha-dodecanoyl-L-arginate (LAE) were developed for food packaging applications. Cast chitosan films were made with 1, 5 or 10% LAE and 20% glycerol in the film forming solution. Optical properties, release of LAE and antimicrobial activity of developed films was determined, The minimum inhibitory concentration (MIC) and the minimum biocide concentration (MBC) of LAE were determined. CS films with LAE were transparent and uniform, without discontinuities or visible particles and no visual differences could be perceived between CS and CS-LAE films. When in contact with an aqueous food simulant, the agent was fully released following a Fickian behavior in a few hours at 4 and 28 T. Antimicrobial activity of films against mesophiles, psychrophiles, Pseudomonas spp., colifoms, lactic acid bacteria, hydrogen sulfide-producing bacteria, yeast and fungi, was evaluated at two, six and eight days for its application on chicken breast fillets. Films were active against bacteria, yeasts and fungi in liquid and solid media. CS films evidenced antimicrobial activity in the range 0.47-2.96 log reductions, while CS-5%LAE film produced 1.78-5.81 log reduction. Results highlighted that LAE incorporation in a chitosan-based packaging structure may provide a relevant antimicrobial activity that could improve the stability of fresh poultry products. (C) 2013 Elsevier B.V. All rights reserved., Authors thank the financial support of the Spanish Ministry of Science and Innovation (projects AGL2009-08776, AGL2012-39920-CO3-01), EU (Nafispack project 212544), and JAE program from CSIC (L.H. fellowship) and Mr. Karel Clapshaw (translation services).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Active films based on cocoa extract with antioxidant, antimicrobial and biological applications

  • Calatayud, Marta
  • López de Dicastillo Bergamo, Ana Carolina
  • López Carballo, Gracia
  • Vélez, Dinoraz
  • Hernandez Muñoz, Maria Pilar
  • GAVARA CLEMENTE, RAFAEL|||0000-0001-6376-8939
[EN] Novel films of ethylene-vinyl alcohol copolymer (EVOH) containing flavonoid-rich cocoa were developed. To understand their potential application as active packaging material, antioxidant and antimicrobial properties of the films were determined as well as the antioxidant activity of the release compounds in Caco-2 human epithelial colorectal adenocarcinoma cells. Exposure of the films to aqueous food simulant showed antioxidant capacity. The release of cocoa extract components was dependent on the antioxidant concentration incorporated in the film and on temperature. Cocoa extract and the fraction obtained after in vitro gastrointestinal digestion presented antioxidant activity against oxidative stress induced by hydrogen peroxide in Caco-2 cells. Films with 10%, 15%, and 20% cocoa extract produced bactericidal effect against Staphylococcus aureus, Listeria monocytogenes, Escherichia coli and Salmonella enterica. The application of films to an infant milk formula, previously inoculated with L. monocytogenes, inhibited the growth of bacteria 1.5 log units the first day and showed sustained release, inhibiting 0.52 and 0.76 log units, respectively, by the sixth day, while cocoa powder added directly did not produce any effect. Published by Elsevier Ltd., The authors acknowledge the financial support of the Spanish Ministry of Science and Innovation, Projects AGL2006-02176, AGL2009-08776 and Fun-C-Food CSD2007-00063, and the C. L-d-D fellowship (FPU program). Karel Clapshaw provided assistance with the English language text.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Evaluation of evoh-coated pp films with oregano essential oil and citral to improve the shelf-life of packaged salad

  • Muriel Galet, Virginia
  • Cerisuelo, Josep R.
  • López Carballo, Gracia
  • Aucejo, Susana
  • Hernández Muñoz, Pilar
  • GAVARA CLEMENTE, RAFAEL|||0000-0001-6376-8939
[EN] The aim of this study was to improve the present packaging of salad by combining modified atmosphere packaging with a new antimicrobial active bag consisting of PP/EVOH film with oregano essential oil or citral, with the purpose of extending shelf-life and reducing possible microbiological risks. The (O-2) and CO2 barrier properties of PP/EVOH, mechanical properties (Young's modulus, tensile strength and elongation at break) were determined and compared with those of standard PP films. Antimicrobial tests were carried out for enterobacteria, total aerobic counts, yeasts and moulds, and lactic acid bacteria and psychrotrophic bacteria, and the effect of the release of the antimicrobial agent on the sensory characteristics of the salads was also studied. The application of the EVOH coating results in an increase in the tensile resistance of the PP films and a reduction in the elongation at break. The results showed that microorganism counts bacteria decreased especially at the beginning of the storage period. OEO and CITRAL samples had reductions of 1.38 log and 2.13 log respectively against enterobacterias, about 2 log against yeasts and moulds. The total aerobic counts reduced 1.08 log with OEO and 1.23 log with CITRAL and the reduction of lactic acid bacteria and psychrotrophic was about 2 log. Citral-based films appeared to be more effective than materials containing oregano essential oil in reducing spoilage flora during storage time. Sensory studies also showed that the package with citral was the most accepted by customers at the end of the shelf-life. (C) 2012 Elsevier Ltd. All rights reserved,, Authors thank the financial support of the Spanish Ministry of Economy and Competitiveness (Project AGL2009-08776 and V.M-G fellowships), EU (Nafispack project 212544), Generalitat Valenciana (J.P.C. fellowship) and Mr. Karel Clapshaw (translation services).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Modifications induced by the addition of a nanoclay in the functional and active properties of an EVOH film containing carvacrol for food packaging

  • Cerisuelo Ferriols, Josep Pascual
  • Alonso, José
  • Aucejo, Susana
  • Hernandez Muñoz, Maria Pilar
  • GAVARA CLEMENTE, RAFAEL|||0000-0001-6376-8939
[EN] A nanoclay/EVOH composite has been developed to retard the release of a volatile antimicrobial from an EVOH film with application in active packaging. Concretely, 2% of bentonite nanoclay was added to the EVOH-29 matrix to modify its mass transport properties and consequently the activity of the antimicrobial film. The nanocomposite obtained, containing 5% of carvacrol as antimicrobial compound, is characterized in terms of antimicrobial solubility and release, water vapor solubility and permeability, oxygen and carbon dioxide permeability, diffusivity and solubility, thermal properties, and microstructural morphology. The clay-filled EVOH-29 film had a similar macroscopic appearance to the unfilled film, thanks to the excellent dispersion of bentonite nanoparticles as revealed by TEM images. Glass transition temperature was higher in the modified material, whereas fusion temperature was slightly lower, although the differences found were not significant. Water vapor, oxygen, carbon dioxide, and carvacrol solubilities were found to be higher for the modified polymer, whereas water vapor permeability, carvacrol diffusivity, and oxygen and carbon dioxide permeabilities and diffusivities were found to be lower for the nanocomposite. All parameters, with the exception of water vapor permeability, increased with the water concentration in the polymeric matrix. Therefore, the incorporation of 2% bentonite nanoclay in EVOH-29 provides a significant improvement in the controlled release of the antimicrobial agent with no relevant drawbacks. (C) 2012 Elsevier B.V. All rights reserved., The authors thank the Spanish Ministry of Science and Innovation (project AGL2009-08776), EU (Nafispack project 212544), and Generalitat Valenciana (J.P.C. fellowship) for financial support and Mr. Karel Clapshaw (translation services).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Diffusion modeling in polymer-clay nanocomposites for food packaging applications through finite element analysis of TEM images

  • Cerisuelo Ferriols, Josep Pascual
  • Hernandez Muñoz, Maria Pilar
  • GAVARA CLEMENTE, RAFAEL|||0000-0001-6376-8939
[EN] Nanocomposites are novel materials increasingly used in the food packaging industry because of their enhanced properties with respect to unfilled polymers, more specifically in active packaging because of their great potential to retain and control active molecules release into the preserved food. The estimation of the improvement achieved in barrier or retention properties is usually performed through the calculation of relative diffusivity, through application of theoretical models. However, their results are disparate and quite inaccurate when working with nanocomposites with low values of volume fraction and aspect ratio of particles. The method presented in this work is based on the mathematical modeling and simulation of diffusion processes, and, unlike the previous models, it only requires as input some TEM micrographs of actual polymer nanocomposites. By subjecting such micrographs to image and finite element analysis the model can yield accurate values of relative diffusivity. EVOH-29 and zein matrices with 1 or 2% of bentonite nanoparticles were employed to validate the model, with average reductions from 3.8 to 12.2% in their solute diffusivities. In spite of possible size effects of diffusing molecules, not considered in the model, values were in agreement with experimental data obtained from permeability measurements, validating the propounded method. (C) 2015 Elsevier B.V. All rights reserved., The authors are grateful to the Spanish Ministry of Science and Innovation (project AGL2009-08776, AGL2012-39920-C03-01), EU (Nafispack project 212544), and Generalitat Valenciana (J.P.C. fellowship) for financial support, to HINE (CSIC associate Unit) for technical collaboration, and to Mr. Tim Swillens (language correction services).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Active antioxidant packaging films: Development and effect on lipid stability of brined sardines

  • López de Dicastillo, Carol
  • Gómez Estaca, Joaquin
  • Catalá, Ramón
  • Gavara, Rafael
  • Hernández-Muñoz, Pilar
Active antioxidant food packaging films were produced by the incorporation of ascorbic acid, ferulic acid, quercetin, and green tea extract into an ethylene vinyl alcohol copolymer (EVOH) matrix. The characterisation of the thermal and barrier properties of the developed film showed that the addition of these bioactive compounds did not greatly modify their properties. However, the presence of ascorbic and ferulic acids resulted in a significant decrease in water vapour permeability, possibly due to the high affinity for water of these substances. Exposure of the films to various food simulants showed that the release from the films was dependent on the type of food simulant and the antioxidant incorporated: in the aqueous food simulant, materials containing ascorbic acid produced the largest release; in the fatty food simulant, quercetin and green tea extract presented the best performance. The efficiency of the films developed was determined by real packaging applications of brined sardines. The evolution of the peroxide index and the malondialdehyde content showed that, in general, the films improved sardine stability. Films with green tea extract offered the best protection against lipid oxidation. © 2011 Elsevier Ltd. All rights reserved., The authors acknowledge the financial support of the Spanish Ministry of Science and Innovation, Projects AGL2006-02176, AGL2009-08776 and Fun-C-Food CSD2007-00063, and the C.L.-d-D. fellowship (FPU Programme)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Advances in antioxidant active food packaging

  • Gómez Estaca, Joaquín
  • López de Dicastillo, Carol
  • Hernández-Muñoz, Pilar
  • Catalá, Ramón
  • Gavara, Rafael
Lipid oxidation is, together with microbial growth, the main cause of spoilage of a great variety of foods, such as nuts, fish, meats, whole milk powders, sauces and oils. It causes a loss of both sensorial and nutritional quality of foods and may even lead to the formation of toxic aldehydes. Some strategies that are commonly used to limit the extent of lipid oxidation of packaged foods are direct addition of antioxidants or packaging under modified atmospheres in which oxygen presence is limited. A novel alternative to these methods is antioxidant active packaging, whose main advantage is that it can provide sustained release of antioxidants during storage. This article reviews the latest advances in antioxidant active food packaging, with special emphasis on antioxidant release systems. The various methods for incorporating antioxidant compounds in the package, the issues to be considered in packaging design, and the various methods employed to date to evaluate the antioxidant effectiveness of active antioxidant materials are reviewed. © 2013 Elsevier Ltd., The authors are grateful for the financial support of the Spanish Ministry of Science and Innovation, projects AGL2009-08776 and Fun-C-Food CSD2007-00063, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Active films based on cocoa extract with antioxidant, antimicrobial and biological applications

  • Arroyo Calatayud, Marta
  • López de Dicastillo, Carol
  • López-Carballo, Gracia
  • Vélez, Dinoraz
  • Hernández-Muñoz, Pilar
  • Gavara, Rafael
Novel films of ethylene-vinyl alcohol copolymer (EVOH) containing flavonoid-rich cocoa were developed. To understand their potential application as active packaging material, antioxidant and antimicrobial properties of the films were determined as well as the antioxidant activity of the release compounds in Caco-2 human epithelial colorectal adenocarcinoma cells. Exposure of the films to aqueous food simulant showed antioxidant capacity. The release of cocoa extract components was dependent on the antioxidant concentration incorporated in the film and on temperature. Cocoa extract and the fraction obtained after in vitro gastrointestinal digestion presented antioxidant activity against oxidative stress induced by hydrogen peroxide in Caco-2 cells. Films with 10%, 15%, and 20% cocoa extract produced bactericidal effect against Staphylococcus aureus, Listeria monocytogenes, Escherichia coli and Salmonella enterica. The application of films to an infant milk formula, previously inoculated with L. monocytogenes, inhibited the growth of bacteria 1.5 log units the first day and showed sustained release, inhibiting 0.52 and 0.76 log units, respectively, by the sixth day, while cocoa powder added directly did not produce any effect., The authors acknowledge the financial support of the Spanish Ministry of Science and Innovation, Projects AGL2006-02176, AGL2009-08776 and Fun-C-Food CSD2007-00063, and the C. L-d-D fellowship (FPU program), Peer reviewed