Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 38
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A locally extended finite element method for the simulation of multi-fluid flows using the Particle Level Set method

  • Kamran, Kamran
  • Rossi, Riccardo|||0000-0003-0528-7074
  • Oñate Ibáñez de Navarra, Eugenio|||0000-0002-0804-7095
The simulation of immiscible two-phase flows on Eulerian meshes requires the use of special techniques to guarantee a sharp definition of the evolving fluid interface. This work describes the combination of two distinct technologies with the goal of improving the accuracy of the target simulations. First of all, a spatial enrichment is employed to improve the approximation properties of the Eulerian mesh. This is done by injecting into the solution space new features to make it able to correctly resolve the solution in the vicinity of the moving interface. Then, the Lagrangian Particle Level Set (PLS) method is employed to keep trace of the evolving solution and to improve the mass conservation properties of the resulting method. While the local enrichment can be understood in the general context of the XFEM, we employ an element-local variant, which allows preserving the matrix graph, and hence highly improving the computational efficiency. (C) 2015 Elsevier B.V. All rights reserved., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Capítulo o parte de un libro (BookPart)

On the application of two-fluid flows solver to the casting problem

  • Kamran, Kazem
  • Rossi, Riccardo|||0000-0003-0528-7074
  • Dadvand, Pooyan|||0000-0001-9515-9273
  • Idelsohn Barg, Sergio Rodolfo
This book presents and discusses mathematical models, numerical methods and computational techniques used for solving coupled problems in science and engineering. It takes a step forward in the formulation and solution of real-life problems with a multidisciplinary vision, accounting for all of the complex couplings involved in the physical description. Simulation of multifaceted physics problems is a common task in applied research and industry. Often a suitable solver is built by connecting together several single-aspect solvers into a network. In this book, research in various fields was selected for consideration: adaptive methodology for multi-physics solvers, multi-physics phenomena and coupled-field solutions, leading to computationally intensive structural analysis. The strategies which are used to keep these problems computationally affordable are of special interest, and make this an essential book., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A portable OpenCL-based unstructured edge-based Finite Element Navier-Stokes solver on graphics hardware

  • Rossi, Riccardo|||0000-0003-0528-7074
  • Mossaiby, Farshid
  • Idelsohn Barg, Sergio Rodolfo
The rise of GPUs in modern high-performance systems increases the interest in porting portion of codes to such hardware. The current paper aims to explore the performance of a portable state-of-the-art FE solver on GPU accelerators. Performance evaluation is done by comparing with an existing highly-optimized OpenMP version of the solver. Code portability is ensured by writing the program using the OpenCL 1.1 specifications, while performance portability is sought through an optimization step performed at the beginning of the calculations to find out the optimal parameter set for the solver. The results show that the new implementation can be several times faster than the OpenMP version.
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Advances in the simulation of multi-fluid flows with the particle finite element method. Application to bubble dynamics

  • Mier Torrecilla, Mónica de
  • Idelsohn Barg, Sergio Rodolfo
  • Oñate Ibáñez de Navarra, Eugenio|||0000-0002-0804-7095
In this work, we extend the Particle Finite Element Method (PFEM) to multi-fluid flow problems with the aim of exploiting the fact that Lagrangian methods are specially well suited for tracking interfaces. We develop a numerical scheme able to deal with large jumps in the physical properties, included surface tension, and able to accurately represent all types of discontinuities in the flow variables. The scheme is based on decoupling the velocity and pressure variables through a pressure segregation method that takes into account the interface conditions. The interface is defined to be aligned with the moving mesh, so that it remains sharp along time, and pressure degrees of freedom are duplicated at the interface nodes to represent the discontinuity of this variable due to surface tension and variable viscosity. Furthermore, the mesh is refined in the vicinity of the interface to improve the accuracy and the efficiency of the computations. We apply the resulting scheme to the benchmark problem of a two-dimensional bubble rising in a liquid column presented in Hysing et al. (International Journal for Numerical Methods in Fluids 2009; 60: 1259–1288), and propose two breakup and coalescence problems to assess the ability of a multi-fluid code to model topology changes., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A monolithic Lagrangian approach for fluid-structure interaction problems

  • Ryzhakov, Pavel|||0000-0002-4672-9038
  • Rossi, Riccardo|||0000-0003-0528-7074
  • Idelsohn Barg, Sergio Rodolfo
  • Oñate Ibáñez de Navarra, Eugenio|||0000-0002-0804-7095
Current work presents a monolithic method for the solution of fluid–structure interaction problems involving flexible structures and free-surface flows. The technique presented is based upon the utilization of a Lagrangian description for both the fluid and the structure. A linear displacement–pressure interpolation pair is used for the fluid whereas the structure utilizes a standard displacement-based formulation. A slight fluid compressibility is assumed that allows to relate the mechanical pressure to the local volume variation. The method described features a global pressure condensation which in turn enables the definition of a purely displacement-based linear system of equations. A matrix-free technique is used for the solution of such linear system, leading to an efficient implementation. The result is a robust method which allows dealing with FSI problems involving arbitrary variations in the shape of the fluid domain. The method is completely free of spurious added-mass effects., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A reduced-order model based on the coupled 1D-3D finite element simulations for an efficient analysis of hemodynamics problems

  • Soudah Prieto, Eduardo|||0000-0002-2301-4718
  • Rossi, Riccardo|||0000-0003-0528-7074
  • Idelsohn Barg, Sergio Rodolfo
  • Oñate Ibáñez de Navarra, Eugenio|||0000-0002-0804-7095
A reduced-order model for an efficient analysis of cardiovascular hemodynamics problems using multiscale approach is presented in this work. Starting from a patient-specific computational mesh obtained by medical imaging techniques, an analysis methodology based on a two-step automatic procedure is proposed. First a coupled 1D-3D Finite Element Simulation is performed and the results are used to adjust a reduced-order model of the 3D patient-specific area of interest. Then, this reduced-order model is coupled with the 1D model. In this way, three-dimensional effects are accounted for in the 1D model in a cost effective manner, allowing fast computation under different scenarios. The methodology proposed is validated using a patient-specific aortic coarctation model under rest and non-rest conditions, Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Parallel adaptive mesh refinement for incompressible flow problems

  • Rossi, Riccardo|||0000-0003-0528-7074
  • Cotela Dalmau, Jordi|||0000-0002-4635-0423
  • Lafontaine, Nelson Maireni
  • Dadvand, Pooyan|||0000-0001-9515-9273
  • Idelsohn Barg, Sergio Rodolfo
The present article describes a simple element-driven strategy for the conforming refinement of simplicial finite element meshes in a distributed environment. The proposed algorithm is effective both for local adaptive refinement and for the division of all the elements within an existing mesh. We aim to provide sufficient detail to allow the practical implementation of the algorithm, which can be coded with minimal effort provided that a distributed linear algebra library is available. The proposed refinement strategy is composed of three basic components: a global splitting strategy, an elemental splitting procedure and an error estimation technique, which are combined so to guarantee obtaining a conformant refined mesh. A number of benchmark examples show the capabilities of the proposed method. Error is estimated for the incompressible fluid-flow benchmarks using a novel indicator based on the computation of the sub-scale velocity.
UPCommons. Portal del coneixement obert de la UPC
Publicación Capítulo o parte de un libro (BookPart)

The particle finite element method (PFEM): an effective numerical technique for solving marine, naval and harbour engineering problems

  • Oñate Ibáñez de Navarra, Eugenio|||0000-0002-0804-7095
  • Idelsohn Barg, Sergio Rodolfo
  • Celigueta Jordana, Miguel Ángel|||0000-0002-7763-4410
  • Suárez Arroyo, Benjamín
We present some developments in the Particle Finite Element Method (PFEM) for the solution of complex coupled problems in marine, naval and harbour engineering involving fluid-soil-structure interaction (FSSI). The PFEM uses an updated Lagrangian description to model the motion of nodes (particles) in a continuum domain containing fluid, soil/rock and structures subdomains. A mesh connects the nodes defining the discretized domain where the governing equations for each of the constituent materials are solved with the FEM. The stabilization for dealing with an incompressibility material is introduced via the finite calculus (FIC) method. An incremental iterative scheme for solving the non linear transient FSSI problem is described. The procedure to model frictional contact conditions and material erosion at fluid-solid and solid-solid interfaces is described. We present examples of application of the PFEM to solve FSSI problems in marine, naval and harbour engineering such as the motion of rocks by water streams, the stability of breakwaters and constructions under sea waves, the sinking of ships and the collision of a ship with ice blocks.
UPCommons. Portal del coneixement obert de la UPC
Publicación Capítulo o parte de un libro (BookPart)

A particle finite element method (PFEM) for coupled thermal analysis of quasi and fully incompressible flows and fluid-structure interaction problems

  • Oñate Ibáñez de Navarra, Eugenio|||0000-0002-0804-7095
  • Franci, Alessandro|||0000-0002-2221-6342
  • Carbonell Puigbó, Josep Maria|||0000-0002-2378-5053
This book presents and discusses mathematical models, numerical methods and computational techniques used for solving coupled problems in science and engineering. It takes a step forward in the formulation and solution of real-life problems with a multidisciplinary vision, accounting for all of the complex couplings involved in the physical description. Simulation of multifaceted physics problems is a common task in applied research and industry. Often a suitable solver is built by connecting together several single-aspect solvers into a network. In this book, research in various fields was selected for consideration: adaptive methodology for multi-physics solvers, multi-physics phenomena and coupled-field solutions, leading to computationally intensive structural analysis. The strategies which are used to keep these problems computationally affordable are of special interest, and make this an essential book.
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Numerical simulations of negatively buoyant jets in an immiscible fluid using the Particle Finite Elemept Method

  • Mier Torrecilla, Mónica de
  • Geyer Traver, Adelina
  • Phillips, Jeremy C.
  • Idelsohn Barg, Sergio Rodolfo
  • Oñate Ibáñez de Navarra, Eugenio|||0000-0002-0804-7095
Negatively buoyant jets consist in a dense fluid injected vertically upward into a lighter ambient fluid. The numerical simulation of this kind of buoyancy-driven flows is challenging as it involves multiple fluids with different physical properties. In the case of immiscible fluids, it requires, in addition, to track the motion of the interface between fluids and accurately represent the discontinuities of the flow variables. In this paper, we investigate numerically the injection of a negatively buoyant jet into a homogenous immiscible ambient fluid using the Particle Finite Element Method and compare the two-dimensional numerical results with experiments on the injection of a jet of dyed water through a nozzle in the base of a cylindrical tank containing rapeseed oil. In both simulations and experiments, the fountain inlet flow velocity and nozzle diameter have been varied to Cover a wide range of Froude Fr and Reynolds Re numbers (0.1 < Fr < 30, 8 < Re < 1350), reproducing both weak and strong laminar fountains. The flow behaviors observed for the different numerical simulations fit in the regime map based on the Re and Fr values of the experiments, and the maximum fountain height is in good agreement with the experimental observations, suggesting that particle finite element method is a useful tool for the study of immiscible two-fluid systems., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Estudio, informe, memoria (Report)

Advances in the simulation of multi-fluid flows with the Particle Finite Element Method: application to bubble dynamics

  • Mier-Torrecilla, Mónica de
  • Idelsohn Barg, Sergio Rodolfo
  • Oñate Ibáñez de Navarra, Eugenio|||0000-0002-0804-7095
In this work we extend the Particle Finite Element Method (PFEM) to multi-fluid flow problems with the aim of exploiting the fact that Lagrangian methods are specially well suited for tracking interfaces. We develop a numerical scheme able to deal with large jumps in the physical properties, included surface tension, and able to accurately represent all types of discontinuities in the flow variables. The scheme is based on decoupling the velocity and pressure variables through a pressure segregation method which takes into account the interface conditions. The interface is defined to be aligned with the moving mesh, so that it remains sharp along time, and pressure degrees of freedom are duplicated at the interface nodes to represent the discontinuity of this variable due to surface tension and variable viscosity. Furthermore, the mesh is refined in the vicinity of the interface to improve the accuracy and the efficiency of the computations. We apply the resulting scheme to the benchmark problem of a two-dimensional bubble rising in a liquid column presented in [1], and propose two breakup and coalescence problems to assess the ability of a multi-fluid code to model topology changes.
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A fast and accurate method to solve the incompressible Navier-Stokes equations

  • Idelsohn Barg, Sergio Rodolfo
  • Nigro, Norberto
  • Gimenez, Juan
  • Rossi, Riccardo|||0000-0003-0528-7074
  • Martí, Julio Marcelo|||0000-0002-6971-1797
Purpose: The purpose of this paper is to highlight the possibilities of a novel Lagrangian formulation in dealing with the solution of the incompressible Navier-Stokes equations with very large time steps. Design/methodology/approach: The design of the paper is based on introducing the origin of this novel numerical method, originally inspired on the Particle Finite Element Method (PFEM), summarizing the previously published theory in its moving mesh version. Afterwards its extension to fixed mesh version is introduced, showing some details about the implementation. Findings: The authors have found that even though this method was originally designed to deal with heterogeneous or free-surface flows, it can be competitive with Eulerian alternatives, even in their range of optimal application in terms of accuracy, with an interesting robustness allowing to use large time steps in a stable way. Originality/value: With this objective in mind, the authors have chosen a number of benchmark examples and have proved that the proposed algorithm provides results which compare favourably, both in terms of solution time and accuracy achieved, with alternative approaches, implemented in in-house and commercial codes., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Migration of a generic multi-physics framework to HPC environments

  • Dadvand, Pooyan|||0000-0001-9515-9273
  • Rossi, Riccardo|||0000-0003-0528-7074
  • Gil, Marisa|||0000-0001-9755-3311
  • Martorell Bofill, Xavier|||0000-0002-0417-3430
  • Cotela Dalmau, Jordi|||0000-0002-4635-0423
  • Juanpere, E.
  • Idelsohn Barg, Sergio Rodolfo
  • Oñate Ibáñez de Navarra, Eugenio|||0000-0002-0804-7095
Creating a highly parallelizable code is a challenge specially for distributed memory machines (DMMs). Moreover, algorithms and data structures suitable for these platforms can be very different from the ones used in serial code. For this reason, many programmers in the field prefer to start their own code from scratch. However, for an already existing framework supported by a long-time expertise the idea of transformation becomes attractive in order to reuse the effort done during years of development. In this presentation we explain how a relatively complex framework but with modular structure can be prepared for high performance computing with minimum modification. Kratos Multi-Physics [1] is an open source generic multi-disciplinary platform for solution of coupled problems consist of fluid, structure, thermal and electromagnetic fields. The parallelization of this framework is performed with objective of enforcing the less possible changes to its different solver modules and encapsulate the changes as much as possible in its common kernel. This objective is achieved thanks to the Kratos design and also innovative way of dealing with data transfers for a multi-disciplinary code. This work is completed by the migration of the framework from the x86 architecture to the Marenostrum Supercomputing platform. The migration has been verified by a set of benchmarks which show high scalability, from which we present the Telescope problem in this paper.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Migration of a generic multi-physics framework to HPC environments

  • Dadvand, Pooyan|||0000-0001-9515-9273
  • Rossi, Riccardo|||0000-0003-0528-7074
  • Gil, Marisa|||0000-0001-9755-3311
  • Martorell Bofill, Xavier|||0000-0002-0417-3430
  • Cotela Dalmau, Jordi|||0000-0002-4635-0423
  • Juanpere, E.
  • Idelsohn Barg, Sergio Rodolfo
  • Oñate Ibáñez de Navarra, Eugenio|||0000-0002-0804-7095
Creating a highly parallelizable code is a challenge and development for distributed memory machines (DMMs) can be very different form developing a serial code in term of algorithms and structure. For this reason, many developers in the field prefer to develop their own code from scratch. However, for an already existing framework with large development background the idea of transformation becomes attractive in order to reuse the effort done during years of development. In this presentation we explain how a relatively complex framework but with modular structure can be prepared for high performance computing with minimum modification. Kratos Multi-Physics [1] is an open source generic multi-disciplinary platform for solution of coupled problems consist of fluid, structure, thermal and electromagnetic fields. The parallelization of this framework is performed with objective of enforcing the less possible changes to its different solver modules and encapsulate the changes as much as possible in its common kernel. This objective is achieved thanks to the Kratos design and also innovative way of dealing with data transfers for a multi-disciplinary code. This work is completed by the migration of the framework from the x86 architecture to the Marenostrum Supercomputing platform. The migration has been verified by a set of benchmarks which show very good scalability, from which we present the Telescope problem in this paper.
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A compressible Lagrangian framework for the simulation of the underwater implosion of large air bubbles

  • Kamran, Kamran
  • Rossi, Riccardo|||0000-0003-0528-7074
  • Oñate Ibáñez de Navarra, Eugenio|||0000-0002-0804-7095
  • Idelsohn Barg, Sergio Rodolfo
A fully Lagrangian compressible numerical framework for the simulation of underwater implosion of a large air bubble is presented. Both air and water are considered compressible and the equations for the Lagrangian shock hydrodynamics are stabilized via a variationally consistent multiscale method. A nodally perfect matched definition of the interface is used and then the kinetic variables, pressure and density, are duplicated at the interface level. An adaptive mesh generation procedure, which respects the interface connectivities, is applied to provide enough refinement at the interface level. This framework is verified by several benchmarks which evaluate the behavior of the numerical scheme for severe compression and expansion cases. This model is then used to simulate the underwater implosion of a large cylindrical bubble, with a size in the order of cm. We observe that the conditions within the bubble are nearly uniform until the converging pressure wave is strong enough to create very large pressures near the center of the bubble. These bubble dynamics occur on very small spatial (0.3 mm), and time (0.1 ms) scales. During the final stage of the collapse Rayleigh–Taylor instabilities appear at the interface and then disappear when the rebounce starts. At the end of the rebounce phase the bubble radius reaches 50% of its initial value and the bubble recover its circular shape. It is when the second collapse starts, with higher mode shape instabilities excited at the bubble interface, that leads to the rupture of the bubble. Several graphs are presented and the pressure pulse detected in the water is compared by experiment., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Capítulo o parte de un libro (BookPart)

The particle finite element method for multi-fluid flows

  • Idelsohn Barg, Sergio Rodolfo
  • Mier Torrecilla, Mónica de
  • Martí, Julio Marcelo|||0000-0002-6971-1797
  • Oñate Ibáñez de Navarra, Eugenio|||0000-0002-0804-7095
This paper presents the Particle Finite Element Method (PFEM) and its application to multi-fluid flows. Key features of the method are the use of a Lagrangian description to model the motion of the fluid particles (nodes) and that all the information is associated to the particles. A mesh connects the nodes defining the discretized domain where the governing equations, expressed in an integral form, are solved as in the standard FEM.We have extended the method to problems involving several different fluids with the aim of exploiting the fact that Lagrangian methods are specially well suited for tracking any kind of interfaces.
UPCommons. Portal del coneixement obert de la UPC
Publicación Capítulo o parte de un libro (BookPart)

Advances in the particle finite element method (PFEM) for solving coupled problems in engineering

  • Oñate Ibáñez de Navarra, Eugenio|||0000-0002-0804-7095
  • Idelsohn Barg, Sergio Rodolfo
  • Celigueta Jordana, Miguel Ángel|||0000-0002-7763-4410
  • Rossi, Riccardo|||0000-0003-0528-7074
  • Martí, Julio Marcelo|||0000-0002-6971-1797
  • Carbonell Puigbó, Josep Maria|||0000-0002-2378-5053
  • Ryzhakov, Pavel|||0000-0002-4672-9038
  • Suárez Arroyo, Benjamín
We present some developments in the formulation of the Particle Finite Element Method (PFEM) for analysis of complex coupled problems on fluid and solid mechanics in engineering accounting for fluid-structure interaction and coupled thermal effects, material degradation and surface wear. The PFEM uses an updated Lagrangian description to model the motion of nodes (particles) in both the fluid and the structure domains. Nodes are viewed as material points which can freely move and even separate from the main analysis domain representing, for instance, the effect of water drops. A mesh connects the nodes defining the discretized domain where the governing equations are solved, as in the standard FEM. The necessary stabilization for dealing with the incompressibility of the fluid is introduced via the finite calculus (FIC) method. An incremental iterative scheme for the solution of the non linear transient coupled fluid-structure problem is described. The procedure for modelling frictional contact conditions at fluid-solid and solid-solid interfaces via mesh generation are described. A simple algorithm to treat soil erosion in fluid beds is presented. An straight forward extension of the PFEM to model excavation processes and wear of rock cutting tools is described. Examples of application of the PFEM to solve a wide number of coupled problems in engineering such as the effect of large waves on breakwaters and bridges, the large motions of floating and submerged bodies, bed erosion in open channel flows, the wear of rock cutting tools during excavation and tunneling and the melting, dripping and burning of polymers in fire situations are presented.
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Flow behaviour of negatively buoyant jets in immiscible ambient fluid

  • Geyer Traver, Adelina
  • Phillips, Jeremy C.
  • Mier Torrecilla, Mónica de
  • Idelsohn Barg, Sergio Rodolfo
  • Oñate Ibáñez de Navarra, Eugenio|||0000-0002-0804-7095
In this paper we investigate experimentally the injection of a negatively buoyant jet into a homogenous immiscible ambient fluid. Experiments are carried out by injecting a jet of dyed fresh water through a nozzle in the base of a cylindrical tank containing rapeseed oil. The fountain inlet flow rate and nozzle diameter were varied to cover a wide range of Richardson Ri (8 9 10-4\Ri\1.98), Reynolds Re (467\Re\5,928) and Weber We (2.40\We\308.56) numbers. Based on the Re, Ri and We values for the experiments, we have determined a regime map to define how these values may control the occurrence of the observed flow types. Whereas Ri plays a stronger role when determining the maximum penetration height, the effect of the Reynolds number is stronger predicting the flow behaviour for a specific nozzle diameter and injection velocity., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Capítulo o parte de un libro (BookPart)

Avoiding instabilities caused by added mass effects in fluid-structure interaction problems

  • Idelsohn Barg, Sergio Rodolfo
  • Pin, Facundo del
  • Rossi, Riccardo|||0000-0003-0528-7074
The main goal of this paper is to present a new strategy to avoid the unstable behavior caused by added mass effects in approaches the involve pressure segregation or staggered techniques in incompressible flows. We will start by partitioning a monolithic fluid-structure interaction scheme using a static condensation of the velocity terms. We will analyse each term and propouse some approximations to the original problem that will greately simplify the solution step without detriment of the fluid-structure interaction stability. Finally we will present some numerical results with eveident added mass effects to eveluate the effectiveness of our technique., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación

Advances in the particle finite element method (PFEM) for solving coupled problems in engineering

  • Oñate Ibáñez de Navarra, Eugenio
  • Idelsohn Barg, Sergio Rodolfo
  • Celigueta Jordana, Miguel Ángel
  • Rossi, Riccardo
  • Martí, Julio Marcelo
  • Carbonell Puigbó, Josep Maria
  • Ryzhakov, Pavel
  • Suárez Arroyo, Benjamín
We present some developments in the formulation of the Particle Finite Element Method (PFEM) for analysis of complex coupled problems on fluid and solid mechanics in engineering accounting for fluid-structure interaction and coupled thermal effects, material degradation and surface wear. The PFEM uses an updated Lagrangian description to model the motion of nodes (particles) in both the fluid and the structure domains. Nodes are viewed as material points which can freely move and even separate from the main analysis domain representing, for instance, the effect of water drops. A mesh connects the nodes defining the discretized domain where the governing equations are solved, as in the standard FEM. The necessary stabilization for dealing with the incompressibility of the fluid is introduced via the finite calculus (FIC) method. An incremental iterative scheme for the solution of the non linear transient coupled fluid-structure problem is described. The procedure for modelling frictional contact conditions at fluid-solid and solid-solid interfaces via mesh generation are described. A simple algorithm to treat soil erosion in fluid beds is presented. An straight forward extension of the PFEM to model excavation processes and wear of rock cutting tools is described. Examples of application of the PFEM to solve a wide number of coupled problems in engineering such as the effect of large waves on breakwaters and bridges, the large motions of floating and submerged bodies, bed erosion in open channel flows, the wear of rock cutting tools during excavation and tunneling and the melting, dripping and burning of polymers in fire situations are presented., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación

The particle finite element method (PFEM): an effective numerical technique for solving marine, naval and harbour engineering problems

  • Oñate Ibáñez de Navarra, Eugenio
  • Idelsohn Barg, Sergio Rodolfo
  • Celigueta Jordana, Miguel Ángel
  • Suárez Arroyo, Benjamín
We present some developments in the Particle Finite Element Method (PFEM) for the solution of complex coupled problems in marine, naval and harbour engineering involving fluid-soil-structure interaction (FSSI). The PFEM uses an updated Lagrangian description to model the motion of nodes (particles) in a continuum domain containing fluid, soil/rock and structures subdomains. A mesh connects the nodes defining the discretized domain where the governing equations for each of the constituent materials are solved with the FEM. The stabilization for dealing with an incompressibility material is introduced via the finite calculus (FIC) method. An incremental iterative scheme for solving the non linear transient FSSI problem is described. The procedure to model frictional contact conditions and material erosion at fluid-solid and solid-solid interfaces is described. We present examples of application of the PFEM to solve FSSI problems in marine, naval and harbour engineering such as the motion of rocks by water streams, the stability of breakwaters and constructions under sea waves, the sinking of ships and the collision of a ship with ice blocks., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Migration of a generic multi-physics framework to HPC environments

  • Dadvand, Pooyan
  • Rossi, Riccardo
  • Gil, Marisa
  • Martorell Bofill, Xavier
  • Cotela Dalmau, Jordi
  • Juanpere, E.
  • Idelsohn Barg, Sergio Rodolfo
  • Oñate Ibáñez de Navarra, Eugenio
Creating a highly parallelizable code is a challenge specially for distributed memory machines (DMMs). Moreover, algorithms and data structures suitable for these platforms can be very different from the ones used in serial code. For this reason, many programmers in the field prefer to start their own code from scratch. However, for an already existing framework supported by a long-time expertise the idea of transformation becomes attractive in order to reuse the effort done during years of development. In this presentation we explain how a relatively complex framework but with modular structure can be prepared for high performance computing with minimum modification. Kratos Multi-Physics [1] is an open source generic multi-disciplinary platform for solution of coupled problems consist of fluid, structure, thermal and electromagnetic fields. The parallelization of this framework is performed with objective of enforcing the less possible changes to its different solver modules and encapsulate the changes as much as possible in its common kernel. This objective is achieved thanks to the Kratos design and also innovative way of dealing with data transfers for a multi-disciplinary code. This work is completed by the migration of the framework from the x86 architecture to the Marenostrum Supercomputing platform. The migration has been verified by a set of benchmarks which show high scalability, from which we present the Telescope problem in this paper., Preprint
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A compressible Lagrangian framework for the simulation of the underwater implosion of large air bubbles

  • Kamran, Kamran
  • Rossi, Riccardo
  • Oñate Ibáñez de Navarra, Eugenio
  • Idelsohn Barg, Sergio Rodolfo
A fully Lagrangian compressible numerical framework for the simulation of underwater implosion of a large air bubble is presented. Both air and water are considered compressible and the equations for the Lagrangian shock hydrodynamics are stabilized via a variationally consistent multiscale method. A nodally perfect matched definition of the interface is used and then the kinetic variables, pressure and density, are duplicated at the interface level. An adaptive mesh generation procedure, which respects the interface connectivities, is applied to provide enough refinement at the interface level. This framework is verified by several benchmarks which evaluate the behavior of the numerical scheme for severe compression and expansion cases. This model is then used to simulate the underwater implosion of a large cylindrical bubble, with a size in the order of cm. We observe that the conditions within the bubble are nearly uniform until the converging pressure wave is strong enough to create very large pressures near the center of the bubble. These bubble dynamics occur on very small spatial (0.3 mm), and time (0.1 ms) scales. During the final stage of the collapse Rayleigh–Taylor instabilities appear at the interface and then disappear when the rebounce starts. At the end of the rebounce phase the bubble radius reaches 50% of its initial value and the bubble recover its circular shape. It is when the second collapse starts, with higher mode shape instabilities excited at the bubble interface, that leads to the rupture of the bubble. Several graphs are presented and the pressure pulse detected in the water is compared by experiment., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A locally extended finite element method for the simulation of multi-fluid flows using the Particle Level Set method

  • Kamran, Kamran
  • Rossi, Riccardo
  • Oñate Ibáñez de Navarra, Eugenio
The simulation of immiscible two-phase flows on Eulerian meshes requires the use of special techniques to guarantee a sharp definition of the evolving fluid interface. This work describes the combination of two distinct technologies with the goal of improving the accuracy of the target simulations. First of all, a spatial enrichment is employed to improve the approximation properties of the Eulerian mesh. This is done by injecting into the solution space new features to make it able to correctly resolve the solution in the vicinity of the moving interface. Then, the Lagrangian Particle Level Set (PLS) method is employed to keep trace of the evolving solution and to improve the mass conservation properties of the resulting method. While the local enrichment can be understood in the general context of the XFEM, we employ an element-local variant, which allows preserving the matrix graph, and hence highly improving the computational efficiency. (C) 2015 Elsevier B.V. All rights reserved., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A fast and accurate method to solve the incompressible Navier-Stokes equations

  • Idelsohn Barg, Sergio Rodolfo
  • Nigro, Norberto
  • Gimenez, Juan
  • Rossi, Riccardo
  • Martí, Julio Marcelo
Purpose: The purpose of this paper is to highlight the possibilities of a novel Lagrangian formulation in dealing with the solution of the incompressible Navier-Stokes equations with very large time steps. Design/methodology/approach: The design of the paper is based on introducing the origin of this novel numerical method, originally inspired on the Particle Finite Element Method (PFEM), summarizing the previously published theory in its moving mesh version. Afterwards its extension to fixed mesh version is introduced, showing some details about the implementation. Findings: The authors have found that even though this method was originally designed to deal with heterogeneous or free-surface flows, it can be competitive with Eulerian alternatives, even in their range of optimal application in terms of accuracy, with an interesting robustness allowing to use large time steps in a stable way. Originality/value: With this objective in mind, the authors have chosen a number of benchmark examples and have proved that the proposed algorithm provides results which compare favourably, both in terms of solution time and accuracy achieved, with alternative approaches, implemented in in-house and commercial codes., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A reduced-order model based on the coupled 1D-3D finite element simulations for an efficient analysis of hemodynamics problems

  • Soudah Prieto, Eduardo
  • Rossi, Riccardo
  • Idelsohn Barg, Sergio Rodolfo
  • Oñate Ibáñez de Navarra, Eugenio
A reduced-order model for an efficient analysis of cardiovascular hemodynamics problems using multiscale approach is presented in this work. Starting from a patient-specific computational mesh obtained by medical imaging techniques, an analysis methodology based on a two-step automatic procedure is proposed. First a coupled 1D-3D Finite Element Simulation is performed and the results are used to adjust a reduced-order model of the 3D patient-specific area of interest. Then, this reduced-order model is coupled with the 1D model. In this way, three-dimensional effects are accounted for in the 1D model in a cost effective manner, allowing fast computation under different scenarios. The methodology proposed is validated using a patient-specific aortic coarctation model under rest and non-rest conditions, Peer Reviewed, Preprint
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Flow behaviour of negatively buoyant jets in immiscible ambient fluid

  • Geyer Traver, Adelina
  • Phillips, Jeremy C.
  • Mier Torrecilla, Mónica de
  • Idelsohn Barg, Sergio Rodolfo
  • Oñate Ibáñez de Navarra, Eugenio
In this paper we investigate experimentally the injection of a negatively buoyant jet into a homogenous immiscible ambient fluid. Experiments are carried out by injecting a jet of dyed fresh water through a nozzle in the base of a cylindrical tank containing rapeseed oil. The fountain inlet flow rate and nozzle diameter were varied to cover a wide range of Richardson Ri (8 9 10-4\Ri\1.98), Reynolds Re (467\Re\5,928) and Weber We (2.40\We\308.56) numbers. Based on the Re, Ri and We values for the experiments, we have determined a regime map to define how these values may control the occurrence of the observed flow types. Whereas Ri plays a stronger role when determining the maximum penetration height, the effect of the Reynolds number is stronger predicting the flow behaviour for a specific nozzle diameter and injection velocity., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A portable OpenCL-based unstructured edge-based Finite Element Navier-Stokes solver on graphics hardware

  • Rossi, Riccardo
  • Mossaiby, Farshid
  • Idelsohn Barg, Sergio Rodolfo
The rise of GPUs in modern high-performance systems increases the interest in porting portion of codes to such hardware. The current paper aims to explore the performance of a portable state-of-the-art FE solver on GPU accelerators. Performance evaluation is done by comparing with an existing highly-optimized OpenMP version of the solver. Code portability is ensured by writing the program using the OpenCL 1.1 specifications, while performance portability is sought through an optimization step performed at the beginning of the calculations to find out the optimal parameter set for the solver. The results show that the new implementation can be several times faster than the OpenMP version., Preprint
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Migration of a generic multi-physics framework to HPC environments

  • Dadvand, Pooyan
  • Rossi, Riccardo
  • Gil, Marisa
  • Martorell Bofill, Xavier
  • Cotela Dalmau, Jordi
  • Juanpere, E.
  • Idelsohn Barg, Sergio Rodolfo
  • Oñate Ibáñez de Navarra, Eugenio
Creating a highly parallelizable code is a challenge and development for distributed memory machines (DMMs) can be very different form developing a serial code in term of algorithms and structure. For this reason, many developers in the field prefer to develop their own code from scratch. However, for an already existing framework with large development background the idea of transformation becomes attractive in order to reuse the effort done during years of development. In this presentation we explain how a relatively complex framework but with modular structure can be prepared for high performance computing with minimum modification. Kratos Multi-Physics [1] is an open source generic multi-disciplinary platform for solution of coupled problems consist of fluid, structure, thermal and electromagnetic fields. The parallelization of this framework is performed with objective of enforcing the less possible changes to its different solver modules and encapsulate the changes as much as possible in its common kernel. This objective is achieved thanks to the Kratos design and also innovative way of dealing with data transfers for a multi-disciplinary code. This work is completed by the migration of the framework from the x86 architecture to the Marenostrum Supercomputing platform. The migration has been verified by a set of benchmarks which show very good scalability, from which we present the Telescope problem in this paper., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación

On the application of two-fluid flows solver to the casting problem

  • Kamran, Kazem
  • Rossi, Riccardo
  • Dadvand, Pooyan
  • Idelsohn Barg, Sergio Rodolfo
This book presents and discusses mathematical models, numerical methods and computational techniques used for solving coupled problems in science and engineering. It takes a step forward in the formulation and solution of real-life problems with a multidisciplinary vision, accounting for all of the complex couplings involved in the physical description. Simulation of multifaceted physics problems is a common task in applied research and industry. Often a suitable solver is built by connecting together several single-aspect solvers into a network. In this book, research in various fields was selected for consideration: adaptive methodology for multi-physics solvers, multi-physics phenomena and coupled-field solutions, leading to computationally intensive structural analysis. The strategies which are used to keep these problems computationally affordable are of special interest, and make this an essential book., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A monolithic Lagrangian approach for fluid-structure interaction problems

  • Ryzhakov, Pavel
  • Rossi, Riccardo
  • Idelsohn Barg, Sergio Rodolfo
  • Oñate Ibáñez de Navarra, Eugenio
Current work presents a monolithic method for the solution of fluid–structure interaction problems involving flexible structures and free-surface flows. The technique presented is based upon the utilization of a Lagrangian description for both the fluid and the structure. A linear displacement–pressure interpolation pair is used for the fluid whereas the structure utilizes a standard displacement-based formulation. A slight fluid compressibility is assumed that allows to relate the mechanical pressure to the local volume variation. The method described features a global pressure condensation which in turn enables the definition of a purely displacement-based linear system of equations. A matrix-free technique is used for the solution of such linear system, leading to an efficient implementation. The result is a robust method which allows dealing with FSI problems involving arbitrary variations in the shape of the fluid domain. The method is completely free of spurious added-mass effects., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación

The particle finite element method for multi-fluid flows

  • Idelsohn Barg, Sergio Rodolfo
  • Mier Torrecilla, Mónica de
  • Martí, Julio Marcelo
  • Oñate Ibáñez de Navarra, Eugenio
This paper presents the Particle Finite Element Method (PFEM) and its application to multi-fluid flows. Key features of the method are the use of a Lagrangian description to model the motion of the fluid particles (nodes) and that all the information is associated to the particles. A mesh connects the nodes defining the discretized domain where the governing equations, expressed in an integral form, are solved as in the standard FEM.We have extended the method to problems involving several different fluids with the aim of exploiting the fact that Lagrangian methods are specially well suited for tracking any kind of interfaces., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación

Avoiding instabilities caused by added mass effects in fluid-structure interaction problems

  • Idelsohn Barg, Sergio Rodolfo
  • Pin, Facundo del
  • Rossi, Riccardo
The main goal of this paper is to present a new strategy to avoid the unstable behavior caused by added mass effects in approaches the involve pressure segregation or staggered techniques in incompressible flows. We will start by partitioning a monolithic fluid-structure interaction scheme using a static condensation of the velocity terms. We will analyse each term and propouse some approximations to the original problem that will greately simplify the solution step without detriment of the fluid-structure interaction stability. Finally we will present some numerical results with eveident added mass effects to eveluate the effectiveness of our technique., Peer Reviewed, Postprint (author’s final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación

Advances in the simulation of multi-fluid flows with the Particle Finite Element Method: application to bubble dynamics

  • Mier-Torrecilla, Mónica de
  • Idelsohn Barg, Sergio Rodolfo
  • Oñate Ibáñez de Navarra, Eugenio
In this work we extend the Particle Finite Element Method (PFEM) to multi-fluid flow problems with the aim of exploiting the fact that Lagrangian methods are specially well suited for tracking interfaces. We develop a numerical scheme able to deal with large jumps in the physical properties, included surface tension, and able to accurately represent all types of discontinuities in the flow variables. The scheme is based on decoupling the velocity and pressure variables through a pressure segregation method which takes into account the interface conditions. The interface is defined to be aligned with the moving mesh, so that it remains sharp along time, and pressure degrees of freedom are duplicated at the interface nodes to represent the discontinuity of this variable due to surface tension and variable viscosity. Furthermore, the mesh is refined in the vicinity of the interface to improve the accuracy and the efficiency of the computations. We apply the resulting scheme to the benchmark problem of a two-dimensional bubble rising in a liquid column presented in [1], and propose two breakup and coalescence problems to assess the ability of a multi-fluid code to model topology changes., Preprint
Recercat. Dipósit de la Recerca de Catalunya
Publicación

A particle finite element method (PFEM) for coupled thermal analysis of quasi and fully incompressible flows and fluid-structure interaction problems

  • Oñate Ibáñez de Navarra, Eugenio
  • Franci, Alessandro
  • Carbonell Puigbó, Josep Maria
This book presents and discusses mathematical models, numerical methods and computational techniques used for solving coupled problems in science and engineering. It takes a step forward in the formulation and solution of real-life problems with a multidisciplinary vision, accounting for all of the complex couplings involved in the physical description. Simulation of multifaceted physics problems is a common task in applied research and industry. Often a suitable solver is built by connecting together several single-aspect solvers into a network. In this book, research in various fields was selected for consideration: adaptive methodology for multi-physics solvers, multi-physics phenomena and coupled-field solutions, leading to computationally intensive structural analysis. The strategies which are used to keep these problems computationally affordable are of special interest, and make this an essential book., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Advances in the simulation of multi-fluid flows with the particle finite element method. Application to bubble dynamics

  • Mier Torrecilla, Mónica de
  • Idelsohn Barg, Sergio Rodolfo
  • Oñate Ibáñez de Navarra, Eugenio
In this work, we extend the Particle Finite Element Method (PFEM) to multi-fluid flow problems with the aim of exploiting the fact that Lagrangian methods are specially well suited for tracking interfaces. We develop a numerical scheme able to deal with large jumps in the physical properties, included surface tension, and able to accurately represent all types of discontinuities in the flow variables. The scheme is based on decoupling the velocity and pressure variables through a pressure segregation method that takes into account the interface conditions. The interface is defined to be aligned with the moving mesh, so that it remains sharp along time, and pressure degrees of freedom are duplicated at the interface nodes to represent the discontinuity of this variable due to surface tension and variable viscosity. Furthermore, the mesh is refined in the vicinity of the interface to improve the accuracy and the efficiency of the computations. We apply the resulting scheme to the benchmark problem of a two-dimensional bubble rising in a liquid column presented in Hysing et al. (International Journal for Numerical Methods in Fluids 2009; 60: 1259–1288), and propose two breakup and coalescence problems to assess the ability of a multi-fluid code to model topology changes., Peer Reviewed, Postprint (author’s final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Parallel adaptive mesh refinement for incompressible flow problems

  • Rossi, Riccardo
  • Cotela Dalmau, Jordi
  • Lafontaine, Nelson Maireni
  • Dadvand, Pooyan
  • Idelsohn Barg, Sergio Rodolfo
The present article describes a simple element-driven strategy for the conforming refinement of simplicial finite element meshes in a distributed environment. The proposed algorithm is effective both for local adaptive refinement and for the division of all the elements within an existing mesh. We aim to provide sufficient detail to allow the practical implementation of the algorithm, which can be coded with minimal effort provided that a distributed linear algebra library is available. The proposed refinement strategy is composed of three basic components: a global splitting strategy, an elemental splitting procedure and an error estimation technique, which are combined so to guarantee obtaining a conformant refined mesh. A number of benchmark examples show the capabilities of the proposed method. Error is estimated for the incompressible fluid-flow benchmarks using a novel indicator based on the computation of the sub-scale velocity., Preprint
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Numerical simulations of negatively buoyant jets in an immiscible fluid using the Particle Finite Elemept Method

  • Mier Torrecilla, Mónica de
  • Geyer Traver, Adelina
  • Phillips, Jeremy C.
  • Idelsohn Barg, Sergio Rodolfo
  • Oñate Ibáñez de Navarra, Eugenio
Negatively buoyant jets consist in a dense fluid injected vertically upward into a lighter ambient fluid. The numerical simulation of this kind of buoyancy-driven flows is challenging as it involves multiple fluids with different physical properties. In the case of immiscible fluids, it requires, in addition, to track the motion of the interface between fluids and accurately represent the discontinuities of the flow variables. In this paper, we investigate numerically the injection of a negatively buoyant jet into a homogenous immiscible ambient fluid using the Particle Finite Element Method and compare the two-dimensional numerical results with experiments on the injection of a jet of dyed water through a nozzle in the base of a cylindrical tank containing rapeseed oil. In both simulations and experiments, the fountain inlet flow velocity and nozzle diameter have been varied to Cover a wide range of Froude Fr and Reynolds Re numbers (0.1 < Fr < 30, 8 < Re < 1350), reproducing both weak and strong laminar fountains. The flow behaviors observed for the different numerical simulations fit in the regime map based on the Re and Fr values of the experiments, and the maximum fountain height is in good agreement with the experimental observations, suggesting that particle finite element method is a useful tool for the study of immiscible two-fluid systems., Peer Reviewed, Postprint (published version)