Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A contact algorithm for shell problems via Delaunay-based meshing of the contact domain

  • Kamran, Kamran
  • Rossi, Riccardo|||0000-0003-0528-7074
  • Oñate Ibáñez de Navarra, Eugenio|||0000-0002-0804-7095
The simulation of the contact within shells, with all of its different facets, represents still an open challenge in Computational Mechanics. Despite the effort spent in the development of techniques for the simulation of general contact problems, an all-seasons algorithm applicable to complex shell contact problems is yet to be developed. This work focuses on the solution of the contact between thin shells by using a technique derived from the particle finite element method together with a rotation-free shell triangle. The key concept is to define a discretization of the contact domain (CD) by constructing a finite element mesh of four-noded tetrahedra that describes the potential contact volume. The problem is completed by using an assumed-strain approach to define an elastic contact strain over the CD., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Analysis of the discharge capacity of radial gated-spillways using CFD and ANN: Oliana Dam case study

  • Salazar González, Fernando|||0000-0002-5566-3253
  • Morán Moya, Rafael
  • Rossi, Riccardo|||0000-0003-0528-7074
  • Oñate Ibáñez de Navarra, Eugenio|||0000-0002-0804-7095
The paper focuses on the analysis of radial-gated spillways, which is carried out by the solution of a numerical model based on the finite element method (FEM). The Oliana Dam is considered as a case study and the discharge capacity is predicted both by the application of a level-set-based free-surface solver and by the use of traditional empirical formulations. The results of the analysis are then used for training an artificial neural network to allow real-time predictions of the discharge in any situation of energy head and gate opening within the operation range of the reservoir. The comparison of the results obtained with the different methods shows that numerical models such as the FEM can be useful as a predictive tool for the analysis of the hydraulic performance of radial-gated spillways., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A compressible Lagrangian framework for the simulation of the underwater implosion of large air bubbles

  • Kamran, Kamran
  • Rossi, Riccardo|||0000-0003-0528-7074
  • Oñate Ibáñez de Navarra, Eugenio|||0000-0002-0804-7095
  • Idelsohn Barg, Sergio Rodolfo
A fully Lagrangian compressible numerical framework for the simulation of underwater implosion of a large air bubble is presented. Both air and water are considered compressible and the equations for the Lagrangian shock hydrodynamics are stabilized via a variationally consistent multiscale method. A nodally perfect matched definition of the interface is used and then the kinetic variables, pressure and density, are duplicated at the interface level. An adaptive mesh generation procedure, which respects the interface connectivities, is applied to provide enough refinement at the interface level. This framework is verified by several benchmarks which evaluate the behavior of the numerical scheme for severe compression and expansion cases. This model is then used to simulate the underwater implosion of a large cylindrical bubble, with a size in the order of cm. We observe that the conditions within the bubble are nearly uniform until the converging pressure wave is strong enough to create very large pressures near the center of the bubble. These bubble dynamics occur on very small spatial (0.3 mm), and time (0.1 ms) scales. During the final stage of the collapse Rayleigh–Taylor instabilities appear at the interface and then disappear when the rebounce starts. At the end of the rebounce phase the bubble radius reaches 50% of its initial value and the bubble recover its circular shape. It is when the second collapse starts, with higher mode shape instabilities excited at the bubble interface, that leads to the rupture of the bubble. Several graphs are presented and the pressure pulse detected in the water is compared by experiment., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Analysis of the discharge capacity of radial gated-spillways using CFD and ANN: Oliana Dam case study

  • Salazar González, Fernando
  • Morán Moya, Rafael
  • Rossi, Riccardo
  • Oñate Ibáñez de Navarra, Eugenio
The paper focuses on the analysis of radial-gated spillways, which is carried out by the solution of a numerical model based on the finite element method (FEM). The Oliana Dam is considered as a case study and the discharge capacity is predicted both by the application of a level-set-based free-surface solver and by the use of traditional empirical formulations. The results of the analysis are then used for training an artificial neural network to allow real-time predictions of the discharge in any situation of energy head and gate opening within the operation range of the reservoir. The comparison of the results obtained with the different methods shows that numerical models such as the FEM can be useful as a predictive tool for the analysis of the hydraulic performance of radial-gated spillways., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A compressible Lagrangian framework for the simulation of the underwater implosion of large air bubbles

  • Kamran, Kamran
  • Rossi, Riccardo
  • Oñate Ibáñez de Navarra, Eugenio
  • Idelsohn Barg, Sergio Rodolfo
A fully Lagrangian compressible numerical framework for the simulation of underwater implosion of a large air bubble is presented. Both air and water are considered compressible and the equations for the Lagrangian shock hydrodynamics are stabilized via a variationally consistent multiscale method. A nodally perfect matched definition of the interface is used and then the kinetic variables, pressure and density, are duplicated at the interface level. An adaptive mesh generation procedure, which respects the interface connectivities, is applied to provide enough refinement at the interface level. This framework is verified by several benchmarks which evaluate the behavior of the numerical scheme for severe compression and expansion cases. This model is then used to simulate the underwater implosion of a large cylindrical bubble, with a size in the order of cm. We observe that the conditions within the bubble are nearly uniform until the converging pressure wave is strong enough to create very large pressures near the center of the bubble. These bubble dynamics occur on very small spatial (0.3 mm), and time (0.1 ms) scales. During the final stage of the collapse Rayleigh–Taylor instabilities appear at the interface and then disappear when the rebounce starts. At the end of the rebounce phase the bubble radius reaches 50% of its initial value and the bubble recover its circular shape. It is when the second collapse starts, with higher mode shape instabilities excited at the bubble interface, that leads to the rupture of the bubble. Several graphs are presented and the pressure pulse detected in the water is compared by experiment., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A contact algorithm for shell problems via Delaunay-based meshing of the contact domain

  • Kamran, Kamran
  • Rossi, Riccardo
  • Oñate Ibáñez de Navarra, Eugenio
The simulation of the contact within shells, with all of its different facets, represents still an open challenge in Computational Mechanics. Despite the effort spent in the development of techniques for the simulation of general contact problems, an all-seasons algorithm applicable to complex shell contact problems is yet to be developed. This work focuses on the solution of the contact between thin shells by using a technique derived from the particle finite element method together with a rotation-free shell triangle. The key concept is to define a discretization of the contact domain (CD) by constructing a finite element mesh of four-noded tetrahedra that describes the potential contact volume. The problem is completed by using an assumed-strain approach to define an elastic contact strain over the CD., Peer Reviewed, Postprint (author's final draft)
Archivo Digital UPM
Publicación Contribución de congreso (ConferenceOutput)

Análisis de flujos en lámina libre y su interacción con sólidos y estructuras por el método de partículas y elementos finitos (PFEM)

  • Oñate Ibáñez, Eugenio
  • Suárez, Benjamín
  • Salazar, Fernando
  • Morán Moya, Rafael|||0000-0002-0031-1605