Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A comparison of homotopic path planning algorithms for robotic applications

  • Hernàndez Bes, Emili
  • Carreras Pérez, Marc
  • Ridao Rodríguez, Pere
This paper addresses the path planning problem for robotic applications using homotopy classes. These classes provide a topological description of how paths avoid obstacles, which is an added value to the path planning problem. Homotopy classes are generated and sorted according to a lower bound heuristic estimator using a method we developed. Then, the classes are used to constrain and guide path planning algorithms. Three different path planners are presented and compared: a graph-search algorithm called Homotopic A∗ (HA∗), a probabilistic sample-based algorithm called Homotopic RRT (HRRT), and a bug-based algorithm called Homotopic Bug (HBug). Our method has been tested in simulation and in an underwater bathymetric map to compute the trajectory of an Autonomous Underwater Vehicle (AUV). A comparison with well-known path planning algorithms has also been included. Results show that our homotopic path planners improve the quality of the solutions of their respective non-homotopic versions with similar computation time while keeping the topological constraints, This research was sponsored by the Spanish Government under the grant DPI2011-27977-C03-02 and the TRIDENT EU FP7-Project under the Grant Agreement No. ICT-248497
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Girona 500 AUV: From Survey to Intervention

  • Ribas Romagós, David
  • Palomeras Rovira, Narcís
  • Ridao Rodríguez, Pere
  • Carreras Pérez, Marc
  • Mallios, Angelos
This paper outlines the specifications and basic design approach taken on the development of the Girona 500, an autonomous underwater vehicle whose most remarkable characteristic is its capacity to reconfigure for different tasks. The capabilities of this new vehicle range from different forms of seafloor survey to inspection and intervention tasks, Manuscript received April 1, 2011; revised August 5, 2011; accepted October 7, 2011. Date of publication November 30, 2011; date of current version January 9, 2012. Recommended by Guest Editor W. Kirkwood. This work was supported in part by the TRIDENT EU FP7-Project under Grant ICT-248497, in part by the Marie Curie PERG-GA-2010-276778 (Surf3DSLAM), and in part by the Spanish Government under the projects DPI2008-06548-C03 and CTM2010-15216/MAR
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Team-Based Building of a Remotely Operated Underwater Robot, an Innovative Method of Teaching Engineering

  • El-Fakdi Sencianes, Andrés
  • Cufí i Solé, Xavier
  • Hurtós Vilarnau, Natàlia
  • Correa, Montserrat
This article reports the experience gathered along 6 years in developing a team-based project activity to promote engineering programs among secondary school students. The aim of the activity is to increase the interest of students for science and technology in general, but also to promote engineering skills, capabilities and values, leading to attract more secondary school students to enrolment for engineering programs. Simple theoretical concepts related to physics and engineering are illustrated through hands-on experimentation. To achieve this goal, the students build a remotely operated underwater robot in a workshop. The robot is built using low-cost materials and the students customize their own design over the different phases of the workshop. Once the activity is completed, every team understands that with teamwork, effort and a good working strategy, every problem can be overcome, This work has been partially funded by the Catalan Government (Generalitat de Catalunya) through ACDC grants 2009, 2010, 2011, 2012 and 2013, the EnginyCAT program, MICINN project CTM2010-15216, EU project FP7- ICT-2009-248497 and the UdG (Social Council, VICOROB Research Group, Patronatge of Technical School and Vicerectorate of Research).
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

I-AUV Mechatronics Integration for the TRIDENT FP7 Project

  • Ribas Romagós, David
  • Ridao Rodríguez, Pere
  • Turetta, Alessio
  • Melchiorri, Claudio
  • Palli, Gianluca
  • Fernández, José Javier
  • Sanz, Pedro José
Autonomous underwater vehicles (AUVs) are routinely used to survey areas of interest in seas and oceans all over the world. However, those operations requiring intervention capabilities are still reserved to manned submersibles or remotely operated vehicles (ROVs). In the recent years, few research projects have demonstrated the viability of a new type of submersible, the intervention AUV (I-AUV), which can perform underwater missions involving manipulations in a completely autonomous way. The EU FP7 TRIDENT project is one of the most recent examples of such technological concept. This paper describes the different mechatronic components that constitute the I-AUV developed for the TRIDENT project, their hardware and software integration, and the performance of the vehicle during the project trials, This work was supported by the TRIDENT EU FP7 Project under Grant ICT-248497 and the Spanish Project DPI2011-27977-C03v (TRITON)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

COLA2: A control architecture for AUVs

  • Palomeras Rovira, Narcís
  • El-Fakdi Sencianes, Andrés
  • Carreras Pérez, Marc
  • Ridao Rodríguez, Pere
This paper presents a control architecture for an autonomous underwater vehicle (AUV) named the Component Oriented Layer-based Architecture for Autonomy (COLA2). The proposal implements a component-oriented layer-based control architecture structured in three layers: the reactive layer, the execution layer, and the mission layer. Concerning the reactive layer, to improve the vehicle primitives' adaptability to unknown changing environments, reinforcement learning (RL) techniques have been programmed. Starting from a learned-in-simulation policy, the RL-based primitive cableTracking has been trained to follow an underwater cable in a real experiment inside a water tank using the Ictineu AUV. The execution layer implements a discrete event system (DES) based on Petri nets (PNs). PNs have been used to safely model the primitives' execution flow by means of Petri net building block (PNBBs) that have been designed according to some reachability properties showing that it is possible to compose them preserving these qualities. The mission layer describes the mission phases using a high-level mission control language (MCL), which is automatically compiled into a PN. The MCL presents agreeable properties of simplicity and structured programming. MCL can be used to describe offline imperative missions or to describe planning operators, in charge of solving a particular phase of a mission. If planning operators are defined, an onboard planner will be able to sequence them to achieve the proposed goals. The whole architecture has been validated in a cable tracking mission divided in two main phases. First, the cableTracking primitive of the reactive layer has been trained to follow a cable in a water tank with the Ictineu AUV, one of the research platforms available in the Computer Vision and Robotics Group (VICOROB), University of Girona, Girona, Spain. Second, the whole architecture has been proved in a realistic simulation of a whole cable tracking mission, This work was supported by the TRIDENT EU FP7-Project under Grant ICT-248497 and the Spanish Government under Project DPI2008-06548-C03-03
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Scan matching SLAM in underwater environments

  • Mallios, Angelos
  • Ridao Rodríguez, Pere
  • Ribas Romagós, David
  • Hernàndez Bes, Emili
This paper proposes a pose-based algorithm to solve the full simultaneous localization and mapping problem for autonomous underwater vehicle (AUV) navigating in unknown and possibly unstructured environments. The proposed method first estimates the local path traveled by the robot while forming the acoustic image (scan) with range data coming from a mono-beam rotating sonar head, providing position estimates for correcting the distortions that the vehicle motion produces in the scans. Then, consecutive scans are cross-registered under a probabilistic scan matching technique for estimating the displacements of the vehicle including the uncertainty of the scan matching result. Finally, an augmented state extended Kalman filter estimates and keeps the registered scans poses. No prior structural information or initial pose are considered. The viability of the proposed approach has been tested reconstructing the trajectory of a guided AUV operating along a 600 m path within a marina environment, This research work was partially sponsored by the Spanish project DPI2011-27977-C03-02 (COMAROB) and two European Commission's Seventh Framework Program 2007-2013 Projects: ICT-248497 (TRIDENT) and Marie Curie PERG-GA-2010-276778 (Surf3DSLAM). The dataset was acquired with the help of the members (staff and students) of the Computer Vision and Robotics research group at the University of Girona
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A new global alignment approach for underwater optical mapping

  • Elibol, Armagan
  • García Campos, Rafael
  • Grácias, Nuno Ricardo Estrela
Lately, underwater vehicles have become important tools for exploration, monitoring and creation of maps of the seabed. Within mapping applications, the maps obtained from optical data are becoming essential in different study areas such as biological, geological and archaeological surveys, or in detection of benthic temporal changes. However, the underwater medium is very challenging for optical sensors and does not allow the area of interest to be imaged in a single image. Therefore, image mosaicing methods are necessary. Although recent advances in detection of correspondences between images have resulted in highly effective image registration methods, global alignment methods are still needed to obtain a globally coherent mosaic. In this paper, we propose a new global alignment method which works on the mosaic frame and does not require non-linear optimisation. Additionally, a simple image rectifying method is presented to reduce the down-scaling effect which might occur when minimising errors defined in the mosaic frame. Moreover, this rectifying method can also be seen as an alternative and straightforward way of incorporating different sensor information if available. The proposed framework has been tested with underwater image sequences. The resulting method is faster than its counterparts while providing the same level of registration quality, This work was partially funded through the Spanish Ministry of Education and Science (MCINN) under grant CTM2010-15216, EU Project FP7-ICT-2009-248497. Armagan Elibol was funded by Generalitat de Catalunya under grant 2004FI-IQUC1/00130. Nuno Gracias was supported by MCINN under the Ramon y Cajal program
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Feature extraction for underwater visual SLAM

  • Aulinas Masó, Josep M.
  • Carreras Pérez, Marc
  • Lladó Bardera, Xavier
  • Salvi, Joaquim
  • García Campos, Rafael
  • Prados Gutiérrez, Ricard
Detecting and selecting proper landmarks is a key issue to solve Simultaneous Localization and Mapping (SLAM). In this work, we present a novel approach to perform this landmark detection. Our approach is based on using three sources of information: 1) three-dimensional topological information from SLAM; 2) context information to characterize regions of interest (RoI); and 3) features extracted from these RoIs. Topological information is taken from the SLAM algorithm, i.e. the three-dimensional approximate position of the landmark with a certain level of uncertainty. Contextual information is obtained by segmenting the image into background and RoIs. Features extracted from points of interest are then computed by using common feature extractors such as SIFT and SURF. This information is used to associate new observations with known landmarks obtained from previous observations. The proposed approach is tested under a real unstructured underwater environment using the SPARUS AUV. Results demonstrate the validity of our approach, improving map consistency, This work was partially funded through the Spanish Ministry of Education and Science (MCINN) under grant CTM2010-15216 and the EU under grant FP7-ICT-2009-248497
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Reconfigurable AUV for intervention missions: a case study on underwater object recovery

  • Prats, Mario
  • Campos Dausà, Ricard
  • Ribas Romagós, David
  • Palomeras Rovira, Narcís
  • García, Juan Carlos
  • Nannen, Volker
  • Wirth, Stephan
  • Fernández, José Javier
  • Beltran Amengual, J.P.
  • Campos Dausà, Ricard
  • Ridao Rodríguez, Pere
  • Sanz, Pedro José
  • Oliver Codina, Gabriel
  • Carreras Pérez, Marc
  • Grácias, Nuno Ricardo Estrela
  • Marín, Raúl Gella
  • Ortiz, Alberto
Starting in January 2009, the RAUVI (Reconfigurable Autonomous Underwater Vehicle for Intervention Missions) project is a 3-year coordinated research action funded by the Spanish Ministry of Research and Innovation. In this paper, the state of progress after 2 years of continuous research is reported. As a first experimental validation of the complete system, a search and recovery problem is addressed, consisting of finding and recovering a flight data recorder placed at an unknown position at the bottom of a water tank. An overview of the techniques used to successfully solve the problem in an autonomous way is provided. The obtained results are very promising and are the first step toward the final test in shallow water at the end of 2011, This research was partly supported by Spanish Ministry of Research and Innovation DPI2008-06548-C01-02-03 (RAUVI Project), by the European Commissions Seventh Framework Programme FP7/2007-2013 underGrant agreement 248497 (TRIDENT Project), by Fundació Caixa Castelló-Bancaixa P1-1B2009-50, and by the Spanish Ministry of Education and Science (MCINN Grant CTM2010-15216), Ramon Y Cajal Program (N. Gracias) and the FPI program (R. Campos)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Grasping for the seabed: developing a new underwater robot arm for shallow-water intervention

  • Fernández, José Javier
  • Prats, Mario
  • Sanz, Pedro José
  • García, Juan Carlos
  • Marín, Raúl Gella
  • Robinson, Mike
  • Ribas Romagós, David
  • Ridao Rodríguez, Pere
A new underwater robot arm was developed through intensive cooperation between different academic institutions and an industrial company. The manipulator, which was initially designed to be teleoperated, was adapted for our autonomy needs. Its dimensions and weight were reduced, and its kinematic model was developed so that autonomous control can be performed with it. We compare several commercially available underwater manipulators and describe the development of the new one, from its initial configuration to its mechanical adaptation, modeling, control, and final assembly on an autonomous underwater vehicle (AUV). The feasibility and reliability of this arm is demonstrated in water tank conditions, where various innovative autonomous object-recovery operations are successfully performed, both in stand-alone operation and integrated in an AUV prototype, This research was partly supported by Spanish Ministry of Research and Innovation DPI2011-27977-C03 (TRITON Project) and DPI2008-06548-C03 (RAUVI Project), by the European Commission's Seventh Framework Programme FP7/2007-2013 under grant agreement 248497 (TRIDENT Project), by Foundation Caixa Castello-Bancaixa PI.1B2011-17, and by Generalitat Valenciana ACOMP/2012/252