Pasar al contenido principal

COMAROB: ROBOTICA COOPERATIVA MARINA PARA EL MAPEO ACUSTICO Y LA INTERVENCION

DPI2011-27977-C03-02

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Nacional de Proyectos de Investigación Fundamental
Subprograma Subprograma de Proyectos de Investigación Fundamental no Orientada
Convocatoria Proyectos I+D
Año convocatoria 2011
Plan Estatal 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Unidad de gestión Subdirección General de Proyectos de Investigación
Centro beneficiario UNIVERSITAT DE GIRONA
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A comparison of homotopic path planning algorithms for robotic applications

  • Hernàndez Bes, Emili
  • Carreras Pérez, Marc
  • Ridao Rodríguez, Pere
This paper addresses the path planning problem for robotic applications using homotopy classes. These classes provide a topological description of how paths avoid obstacles, which is an added value to the path planning problem. Homotopy classes are generated and sorted according to a lower bound heuristic estimator using a method we developed. Then, the classes are used to constrain and guide path planning algorithms. Three different path planners are presented and compared: a graph-search algorithm called Homotopic A∗ (HA∗), a probabilistic sample-based algorithm called Homotopic RRT (HRRT), and a bug-based algorithm called Homotopic Bug (HBug). Our method has been tested in simulation and in an underwater bathymetric map to compute the trajectory of an Autonomous Underwater Vehicle (AUV). A comparison with well-known path planning algorithms has also been included. Results show that our homotopic path planners improve the quality of the solutions of their respective non-homotopic versions with similar computation time while keeping the topological constraints, This research was sponsored by the Spanish Government under the grant DPI2011-27977-C03-02 and the TRIDENT EU FP7-Project under the Grant Agreement No. ICT-248497
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Learning by demonstration applied to underwater intervention

  • Carrera Viñas, Arnau
  • Palomeras Rovira, Narcís
  • Hurtós Vilarnau, Natàlia
  • Kormushev, Petar
  • Carreras Pérez, Marc
Comunicació de congrés presentada a: 17th International Conference of the Catalan Association for Artificial Intelligence, Barcelona, Catalonia, Spain, October 22-24, 2014, Performing subsea intervention tasks is a challenge due to the complexities of the underwater domain. We propose to use a learning by demonstraition algorithm to intuitively teach an intervention autonomous underwater vehicle (IAUV) how to perform a given task. Taking as an input few operator demonstrations, the algorithm generalizes the task into a model and simultaneously controls the vehicle and the manipulator (using 8 degrees of freedom) to reproduce the task. A complete framework has been implemented in order to integrate the LbD algorithm with the different onboard sensors and actuators. A valve turning intervention task is used to validate the full framework through real experiments conducted in a water tank, This research was sponsored by the Spanish government (COMAROB Project, DPI2011-27977-C03-02) and the PANDORA EU FP7-Project under the Grant agreement FP7-ICT-2011-7-288273
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Coverage Path Planning with Real-time Replanning and Surface Reconstruction for Inspection of Three-dimensional Underwater Structures using Autonomous Underwater Vehicles

  • Galceran Yebenes, Enric
  • Campos Dausà, Ricard
  • Palomeras Rovira, Narcís
  • Ribas Romagós, David
  • Carreras Pérez, Marc
  • Ridao Rodríguez, Pere
We present a novel method for planning coverage paths for inspecting complex structures on the ocean floor using an autonomous underwater vehicle (AUV). Our method initially uses a 2.5-dimensional (2.5D) prior bathymetric map to plan a nominal coverage path that allows the AUV to pass its sensors over all points on the target area. The nominal path uses a standard mowing-the-lawn pattern in effectively planar regions, while in regions with substantial 3D relief it follows horizontal contours of the terrain at a given offset distance. We then go beyond previous approaches in the literature by considering the vehicle's state uncertainty rather than relying on the unrealistic assumption of an idealized path execution. Toward that end, we present a replanning algorithm based on a stochastic trajectory optimization that reshapes the nominal path to cope with the actual target structure perceived in situ. The replanning algorithm runs onboard the AUV in real time during the inspection mission, adapting the path according to the measurements provided by the vehicle's range-sensing sonars. Furthermore, we propose a pipeline of state-of-the-art surface reconstruction techniques we apply to the data acquired by the AUV to obtain 3D models of the inspected structures that show the benefits of our planning method for 3D mapping. We demonstrate the efficacy of our method in experiments at sea using the GIRONA 500 AUV, where we cover part of a breakwater structure in a harbor and an underwater boulder rising from 40 m up to 27 m depth, This research has been sponsored by the Government of Spain (COMAROB Project, DPI2011-27977-C03-02), the MORPH EU FP7-Project (grant agreement FP7-ICT-2011-7-288704), and the Eurofleets2 EU FP7-Project (grant agreement FP7-INF-2012-312762). The authors are grateful to Lluis Magi, Carles Candela, and Arnau Carrera for helping with the GIRONA 500 operations
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Intervention AUVs: The next challenge

  • Ridao Rodríguez, Pere
  • Carreras Pérez, Marc
  • Ribas Romagós, David
  • Sanz, Pedro José
  • Oliver Codina, Gabriel
While commercially available AUVs are routinely used in survey missions, a new set of applications exist which clearly demand intervention capabilities. The maintenance of permanent underwater observatories, submerged oil wells, cabled sensor networks, pipes and the deployment and recovery of benthic stations are a few of them. These tasks are addressed nowadays using manned submersibles or work-class ROVs, equipped with teleoperated arms under human supervision. Although researchers have recently opened the door to future I-AUVs, a long path is still necessary to achieve autonomous underwater interventions. This paper reviews the evolution timeline in autonomous underwater intervention systems. Milestone projects in the state of the art are reviewed, highlighting their principal contributions to the field. To the best of the authors' knowledge, only three vehicles have demonstrated some autonomous intervention capabilities so far: ALIVE, SAUVIM and GIRONA 500, being the last one the lightest one. In this paper GIRONA 500 I-AUV is presented and its software architecture discussed. Recent results in different scenarios are reported: (1) valve turning and connector plugging/unplugging while docked to a subsea panel, (2) free floating valve turning using learning by demonstration, and (3) multipurpose free-floating object recovery. The paper ends discussing the lessons learned so far, This work was supported by the Spanish project DPI2011-27977-C03v (TRITON) and three European Commissions Seventh Framework Program 2011-2015 projects: FP7-ICT-2011-7- 288704 (MORPH) and FP7- INFRASTRUCTURES-2012-312762 (EUROFLEETS2)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Profile Following for Inspection of Underwater Structures

  • Galceran Yebenes, Enric
  • Palomeras Rovira, Narcís
  • Carreras Pérez, Marc
We present a seabed profile estimation and following method for close proximity inspection of 3D underwater structures using autonomous underwater vehicles (AUVs). The presented method is used to determine a path allowing the AUV to pass its sensors over all points of the target structure, which is known as coverage path planning. Our profile following method goes beyond traditional seabed following at a safe altitude and exploits hovering capabilities of recent AUV developments. A range sonar is used to incrementally construct a local probabilistic map representation of the environment and estimates of the local profile are obtained via linear regression. Two behavior-based controllers use these estimates to perform horizontal and vertical profile following. We build upon these tools to address coverage path planning for 3D underwater structures using a (potentially inaccurate) prior map and following cross-section profiles of the target structure. The feasibility of the proposed method is demonstrated using the GIRONA 500 AUV both in simulation using synthetic and real-world bathymetric data and in pool trials, This research was sponsored by the Spanish government (COMAROB Project, DPI2011-27977-C03-02) and the MORPH EU FP7-Project under the Grant agreement FP7-ICT-2011-7-288704. We are grateful for this support
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

I-AUV Mechatronics Integration for the TRIDENT FP7 Project

  • Ribas Romagós, David
  • Ridao Rodríguez, Pere
  • Turetta, Alessio
  • Melchiorri, Claudio
  • Palli, Gianluca
  • Fernández, José Javier
  • Sanz, Pedro José
Autonomous underwater vehicles (AUVs) are routinely used to survey areas of interest in seas and oceans all over the world. However, those operations requiring intervention capabilities are still reserved to manned submersibles or remotely operated vehicles (ROVs). In the recent years, few research projects have demonstrated the viability of a new type of submersible, the intervention AUV (I-AUV), which can perform underwater missions involving manipulations in a completely autonomous way. The EU FP7 TRIDENT project is one of the most recent examples of such technological concept. This paper describes the different mechatronic components that constitute the I-AUV developed for the TRIDENT project, their hardware and software integration, and the performance of the vehicle during the project trials, This work was supported by the TRIDENT EU FP7 Project under Grant ICT-248497 and the Spanish Project DPI2011-27977-C03v (TRITON)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Scan matching SLAM in underwater environments

  • Mallios, Angelos
  • Ridao Rodríguez, Pere
  • Ribas Romagós, David
  • Hernàndez Bes, Emili
This paper proposes a pose-based algorithm to solve the full simultaneous localization and mapping problem for autonomous underwater vehicle (AUV) navigating in unknown and possibly unstructured environments. The proposed method first estimates the local path traveled by the robot while forming the acoustic image (scan) with range data coming from a mono-beam rotating sonar head, providing position estimates for correcting the distortions that the vehicle motion produces in the scans. Then, consecutive scans are cross-registered under a probabilistic scan matching technique for estimating the displacements of the vehicle including the uncertainty of the scan matching result. Finally, an augmented state extended Kalman filter estimates and keeps the registered scans poses. No prior structural information or initial pose are considered. The viability of the proposed approach has been tested reconstructing the trajectory of a guided AUV operating along a 600 m path within a marina environment, This research work was partially sponsored by the Spanish project DPI2011-27977-C03-02 (COMAROB) and two European Commission's Seventh Framework Program 2007-2013 Projects: ICT-248497 (TRIDENT) and Marie Curie PERG-GA-2010-276778 (Surf3DSLAM). The dataset was acquired with the help of the members (staff and students) of the Computer Vision and Robotics research group at the University of Girona
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Cognitive system for autonomous underwater intervention

  • Carrera Viñas, Arnau
  • Palomeras Rovira, Narcís
  • Hurtós Vilarnau, Natàlia
  • Kormushev, Petar
  • Carreras Pérez, Marc
The implementation of autonomous intervention tasks with underwater vehicles is a non-trivial issue due to the challenging and dynamic conditions of the underwater medium (e.g., water current perturbations, water visibility). Likewise, it requires a significant programming effort each time that the vehicle must perform a different manipulation operation. In this paper we propose, instead, to use a cognitive system that learns the intervention task from an expert operator through an intuitive learning by demonstration (LbD) algorithm. Taking as an input few operator demonstrations, the algorithm generalizes the task knowledge into a model and is able to control the vehicle and the manipulator simultaneously to reproduce the task, thus conferring a more adaptive behavior in front of the environment changes and allowing to easily transfer the knowledge of new tasks. A cognitive architecture has been implemented in order to integrate the LbD algorithm with the onboard sensors and actuators and to allow its interplay with the vehicle perception, control and navigation modules. To validate the full framework we present real experiments in a water tank using an AUV equipped with a four DoF manipulator. A human operator teaches the system to perform a valve turning intervention and we analyze the results of multiple task reproductions, including cases under the effect of water current perturbations, showing the success of the system in autonomously reproducing the task, This research was sponsored by the Spanish Government (CO-MAROBProject, DPI2011-27977-C03-02) and the PANDORAEUFP7-Project under the grant agreementFP7-ICT-2011-7288273
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Grasping for the seabed: developing a new underwater robot arm for shallow-water intervention

  • Fernández, José Javier
  • Prats, Mario
  • Sanz, Pedro José
  • García, Juan Carlos
  • Marín, Raúl Gella
  • Robinson, Mike
  • Ribas Romagós, David
  • Ridao Rodríguez, Pere
A new underwater robot arm was developed through intensive cooperation between different academic institutions and an industrial company. The manipulator, which was initially designed to be teleoperated, was adapted for our autonomy needs. Its dimensions and weight were reduced, and its kinematic model was developed so that autonomous control can be performed with it. We compare several commercially available underwater manipulators and describe the development of the new one, from its initial configuration to its mechanical adaptation, modeling, control, and final assembly on an autonomous underwater vehicle (AUV). The feasibility and reliability of this arm is demonstrated in water tank conditions, where various innovative autonomous object-recovery operations are successfully performed, both in stand-alone operation and integrated in an AUV prototype, This research was partly supported by Spanish Ministry of Research and Innovation DPI2011-27977-C03 (TRITON Project) and DPI2008-06548-C03 (RAUVI Project), by the European Commission's Seventh Framework Programme FP7/2007-2013 under grant agreement 248497 (TRIDENT Project), by Foundation Caixa Castello-Bancaixa PI.1B2011-17, and by Generalitat Valenciana ACOMP/2012/252