Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Estimation of a suitable Schmidt number range in diesel sprays at high injection pressure

  • Salvador, Francisco Javier|||0000-0003-3269-2251
  • Ruiz-Rosales, Santiago|||0000-0001-9536-3696
  • Gimeno, Jaime|||0000-0003-3317-9994
  • De La Morena, Joaquín|||0000-0003-0208-508X
The aim of this paper is to estimate a suitable range for the Schmidt number value in non-evaporative diesel sprays. For this purpose, mass distribution data obtained from X-ray absorption experiments existing in literature and a theoretical derivation for spray microscopic characteristics have been combined. Firstly, a procedure based on Gaussian concentration profiles has been proposed in order to interpret X-ray absorption results and relate them to physical parameters as local concentration or spray density. After this, information about FWHM (Full Width at Half Maximum) values has allowed to estimate spray angle in the tested conditions by the definition of Gaussian profiles for the mass radial distribution inside the spray. Following, a theoretical model dependent on momentum flux and Schmidt number has been used to simulate local mass concentration evolution along the spray axis and compare it with the values obtained from the experiments. The combination of the experimental and the theoretical data has allowed to estimate a suitable range for the Schmidt number value in such conditions as those existing in diesel sprays. © 2011 Elsevier Masson SAS. All rights reserved., This work was sponsored by "Vicerrectorado de Investigacion, Desarrollo e Innovacion" of the "Universitat Politecnica de Valencia" in the frame of the project "Estudio numeric de la cavitacion en toberas de inyeccion Diesel mediante Grid Computing (Cavigrid) Reference No 2597.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Computational study of the cavitation phenomenon and its interaction with the turbulence developed in diesel injector nozzles by Large Eddy Simulation (LES)

  • Salvador, Francisco Javier|||0000-0003-3269-2251
  • Romero, José-Vicente|||0000-0003-3366-6557
  • Roselló, María-Dolores|||0000-0002-5724-7683
  • Martínez López, Jorge
Firstly, the code has been validated at real operating diesel engine conditions with experimental data in terms of mass flow, momentum flux and effective velocity, showing that the model is able to predict with a high level of confidence the behavior of the internal flow at cavitating conditions. Once validated, the code has allowed to study in depth the turbulence developed in the discharge orifices and its interaction with cavitation phenomenon. (C) 2011 Elsevier Ltd. All rights reserved., This work was partly sponsored by "Vicerrectorado de Investigacion, Desarrollo e Innovacion'' of the "Universitat Politecnica de Valencia'' in the frame of the project "Estudio numerico de la cavitacion en toberas de inyeccion Diesel mediante Grid Computing (Cavigrid)'', reference No. 2597 and by "Ministerio de Ciencia e Innovacion'' in the frame of the project "Estudio teorico-experimental sobre la influencia del tipo de combustible en los procesos de atomizacion y evaporacion del chorro Diesel (PROFUEL)'', reference TRA2011-26293. This support is gratefully acknowledged by the authors.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Using one-dimensional modeling to analyze the influence of the use of biodiesels on the dynamic behavior of solenoid-operated injectors in common rail systems: Results of the simulations and discussion

  • Salvador, Francisco Javier|||0000-0003-3269-2251
  • Gimeno, Jaime|||0000-0003-3317-9994
  • De La Morena, Joaquín|||0000-0003-0208-508X
  • Carreres, Marcos|||0000-0001-6430-6613
The influence of using biodiesel fuels on the hydraulic behavior of a solenoid operated common rail injection system has been explored by means of a one-dimensional model. This model has been previously obtained, including a complete characterization of the different components of the injector (mainly the nozzle, the injector holder and the electrovalve), and extensively validated by means of mass flow rate results under different conditions. After that, both single and multiple injection strategies have been analyzed, using a standard diesel fuel and rapeseed methyl ester (RME) as working fluids. Single long injections allowed the characterization of the hydraulic delay of the injector, the needle dynamics and the discharge capability of the couple injector-nozzle for the two fuels considered. Meanwhile, the effect of biodiesel on main plus post injection strategies has been evaluated in several aspects, such as the separation of the two injections or the effect of the main injection on the post injection fueling. Finally, a modification in the injector hardware has been proposed in order to have similar performances using biodiesel as the original injector configuration using standard diesel fuel., This work was sponsored by "Vicerrectorado de Investigacion, Desarrollo e Innovacion" of the "Universidad Politecnica de Valencia" in the frame of the project "Estudio numerico de la cavitacion en toberas de inyeccion Diesel mediante Grid Computing (Cavigrid)", Reference No. 2597 and by "Ministerio de Ciencia e Innovacion" in the frame of the Project "Estudio teorico experimental sobre la influencia del tipo de combustible en los procesos de atomizacion y evaporacion del chorro Diesel (PROFUEL)", Reference No. TRA2011-26293. This support is gratefully acknowledged by the authors.