Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Numerical model evaluation of a PCM cold storage tank and uncertainty analysis of the parameters

  • Zsembinszki, Gabriel
  • Moreno Argilés, Pere
  • Solé Cutrona, Cristian
  • Castell, Albert
  • Cabeza, Luisa F.
Thermal energy storage (TES) tanks for cold storage can be used for peak load shaving. This paper presents and evaluates a mathematical model where a TES tank is filled with commercial phase change material (PCM) flat slabs. The 2D model is used for simulating the outlet temperature of the heat transfer fluid, and also the heat transfer rate during the discharging process. The study includes the use of an approximation of the PCM specific heat (cPCM;old) which corresponds to the parameter calculated in the previous iteration of the implicit finite difference method. Thus, an evaluation of the different model parameters is performed, based on the comparison between the computational time and accuracy of the different simulations. Moreover, the uncertainties in different input variables are also analysed in order to find out which variable should be known more accurately. The results show that using the approximated parameter cPCM;old is a good solution for reducing the computational time despite a slight error increase in the case of using small time step in the simulation. Moreover, the inlet HTF temperature, and melting temperature, density and specific heat of the PCM are the main parameters to take into account in terms of uncertainty variables evaluation., The research leading to these results has received funding from the [EuropeanCommunity’s] Seventh Framework Programme([FP7/ 2007-2013] [FP7/2007-2011])under grant agreementn_262285.The work was partially funded by the Spanish Government (ENE2011- 22722, ENE2011-28269-C03-01 and ULLE10-4E-1305). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2009 SFR 534).
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

PCM thermal energy storage tanks in heat pump system for space cooling

  • Moreno Cermeño, Pere
  • Castell, Albert
  • Solé Cutrona, Cristian
  • Zsembinszki, Gabriel
  • Cabeza, Luisa F.
A heat pump coupled to thermal energy storage (TES) tanks is experimentally tested under simulated summer conditions and the results are presented in this paper. The cold TES tank is used for shifting the cooling load of a small house-like structure. The study evaluates the thermal behaviour of the TES tank for cold storage and the application of the system for space cooling. For the analysis, two different configurations of the tanks are compared: a water tank and a PCM tank. The PCM tank is filled with a commercial macro-encapsulated PCM, which has a phase change temperature of 10 ◦C. The results point out that the PCM tank is able to supply 14.5% more cold and to maintain the indoor temperature within comfort 20.65% longer than the water tank. However, it needs 4.55 times longer to charge the tank., The research leading to these results has received funding from the [European Community’s] Seventh Framework Programme ([FP7/2007-2013] [FP7/2007-2011]) under grant agreement n◦262285 (HESTOR). The work was partially funded by the Spanish government (ENE2011-22722, ENE2011-28269-C03- 01 and ULLE10-4E-1305), with the collaboration of the City Hall of Puigverd de Lleida. The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2009 SGR 534). The research leading to these results has received funding from the European Union’s Seventh Framework Programme (FP7/2007-2013) under grant agreement n◦ PIRSESGA-2013-610692 (INNOSTORAGE).
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Numerical model evaluation of a PCM cold storage tank and uncertainty analysis of the parameters

  • Zsembinszki, Gabriel
  • Moreno Argilés, Pere
  • Solé Cutrona, Cristian
  • Castell, Albert
  • Cabeza, Luisa F.
Thermal energy storage (TES) tanks for cold storage can be used for peak load shaving. This paper presents and evaluates a mathematical model where a TES tank is filled with commercial phase change material (PCM) flat slabs. The 2D model is used for simulating the outlet temperature of the heat transfer fluid, and also the heat transfer rate during the discharging process. The study includes the use of an approximation of the PCM specific heat (cPCM;old) which corresponds to the parameter calculated in the previous iteration of the implicit finite difference method. Thus, an evaluation of the different model parameters is performed, based on the comparison between the computational time and accuracy of the different simulations. Moreover, the uncertainties in different input variables are also analysed in order to find out which variable should be known more accurately. The results show that using the approximated parameter cPCM;old is a good solution for reducing the computational time despite a slight error increase in the case of using small time step in the simulation. Moreover, the inlet HTF temperature, and melting temperature, density and specific heat of the PCM are the main parameters to take into account in terms of uncertainty variables evaluation., The research leading to these results has received funding from the [EuropeanCommunity’s] Seventh Framework Programme([FP7/ 2007-2013] [FP7/2007-2011])under grant agreementn_262285.The work was partially funded by the Spanish Government (ENE2011- 22722, ENE2011-28269-C03-01 and ULLE10-4E-1305). The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2009 SFR 534).
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

PCM thermal energy storage tanks in heat pump system for space cooling

  • Moreno Cermeño, Pere
  • Castell, Albert
  • Solé Cutrona, Cristian
  • Zsembinszki, Gabriel
  • Cabeza, Luisa F.
A heat pump coupled to thermal energy storage (TES) tanks is experimentally tested under simulated summer conditions and the results are presented in this paper. The cold TES tank is used for shifting the cooling load of a small house-like structure. The study evaluates the thermal behaviour of the TES tank for cold storage and the application of the system for space cooling. For the analysis, two different configurations of the tanks are compared: a water tank and a PCM tank. The PCM tank is filled with a commercial macro-encapsulated PCM, which has a phase change temperature of 10 ◦C. The results point out that the PCM tank is able to supply 14.5% more cold and to maintain the indoor temperature within comfort 20.65% longer than the water tank. However, it needs 4.55 times longer to charge the tank., The research leading to these results has received funding from the [European Community’s] Seventh Framework Programme ([FP7/2007-2013] [FP7/2007-2011]) under grant agreement n◦262285 (HESTOR). The work was partially funded by the Spanish government (ENE2011-22722, ENE2011-28269-C03- 01 and ULLE10-4E-1305), with the collaboration of the City Hall of Puigverd de Lleida. The authors would like to thank the Catalan Government for the quality accreditation given to their research group (2009 SGR 534). The research leading to these results has received funding from the European Union’s Seventh Framework Programme (FP7/2007-2013) under grant agreement n◦ PIRSESGA-2013-610692 (INNOSTORAGE).