Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Standardized low-power wireless communication technologies for distributed sensing applications

  • Vilajosana, Xavier
  • Tuset-Peiro, Pere
  • Vázquez Gallego, Francisco
  • Alonso-Zárate, Jesús
  • Alonso Zárate, Luis Gonzaga|||0000-0002-6608-0862
Recent standardization efforts on low-power wireless communication technologies, including time-slotted channel hopping (TSCH) and DASH7 Alliance Mode (D7AM), are starting to change industrial sensing applications, enabling networks to scale up to thousands of nodes whilst achieving high reliability. Past technologies, such as ZigBee, rooted in IEEE 802.15.4, and ISO 18000-7, rooted in frame-slotted ALOHA (FSA), are based on contention medium access control (MAC) layers and have very poor performance in dense networks, thus preventing the Internet of Things (IoT) paradigm from really taking off. Industrial sensing applications, such as those being deployed in oil refineries, have stringent requirements on data reliability and are being built using new standards. Despite the benefits of these new technologies, industrial shifts are not happening due to the enormous technology development and adoption costs and the fact that new standards are not well-known and completely understood. In this article, we provide a deep analysis of TSCH and D7AM, outlining operational and implementation details with the aim of facilitating the adoption of these technologies to sensor application developers., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Experimental energy consumption of Frame Slotted ALOHA and Distributed Queuing for data collection scenarios

  • Tuset-Peiro, Pere
  • Vázquez-Gallego, Francisco
  • Alonso-Zárate, Jesús
  • Alonso Zárate, Luis Gonzaga|||0000-0002-6608-0862
  • Vilajosana, Xavier
Data collection is a key scenario for the Internet of Things because it enables gathering sensor data from distributed nodes that use low-power and long-range wireless technologies to communicate in a single-hop approach. In this kind of scenario, the network is composed of one coordinator that covers a particular area and a large number of nodes, typically hundreds or thousands, that transmit data to the coordinator upon request. Considering this scenario, in this paper we experimentally validate the energy consumption of two Medium Access Control (MAC) protocols, Frame Slotted ALOHA (FSA) and Distributed Queuing (DQ). We model both protocols as a state machine and conduct experiments to measure the average energy consumption in each state and the average number of times that a node has to be in each state in order to transmit a data packet to the coordinator. The results show that FSA is more energy efficient than DQ if the number of nodes is known a priori because the number of slots per frame can be adjusted accordingly. However, in such scenarios the number of nodes cannot be easily anticipated, leading to additional packet collisions and a higher energy consumption due to retransmissions. Contrarily, DQ does not require to know the number of nodes in advance because it is able to efficiently construct an ad hoc network schedule for each collection round. This kind of a schedule ensures that there are no packet collisions during data transmission, thus leading to an energy consumption reduction above 10% compared to FSA., Peer Reviewed
O2, repositorio institucional de la UOC
Publicación Artículo científico (JournalArticle)

Standardized low-power wireless communication technologies for distributed sensing applications

  • Vilajosana, Xavier
  • Tuset-Peiro, Pere
  • Vázquez Gallego, Francisco
  • Alonso-Zarate, Jesus
  • Alonso Zarate, Luis
Recent standardization efforts on low-power wireless communication technologies, including time-slotted channel hopping (TSCH) and DASH7 Alliance Mode (D7AM), are starting to change industrial sensing applications, enabling networks to scale up to thousands of nodes whilst achieving high reliability. Past technologies, such as ZigBee, rooted in IEEE 802.15.4, and ISO 18000-7, rooted in frame-slotted ALOHA (FSA), are based on contention medium access control (MAC) layers and have very poor performance in dense networks, thus preventing the Internet of Things (IoT) paradigm from really taking off. Industrial sensing applications, such as those being deployed in oil refineries, have stringent requirements on data reliability and are being built using new standards. Despite the benefits of these new technologies, industrial shifts are not happening due to the enormous technology development and adoption costs and the fact that new standards are not well-known and completely understood. In this article, we provide a deep analysis of TSCH and D7AM, outlining operational and implementation details with the aim of facilitating the adoption of these technologies to sensor application developers.
O2, repositorio institucional de la UOC
Publicación Proyecto fin de carrera (BachelorThesis)

Beceroles d'una llengua : Estudi filològic dels "Greuges dels homes de Sant Pere de Graudescales"

  • Soler Cases, Manel
Presentem ací l'estudi filològic dels Greuges dels homes de Sant Pere de Graudescales, un text medieval del segle XII (datació aproximada), escrit en català i l'original del qual es conserva actualment a l'Arxiu Capitular de la Seu d'Urgell. Es tracta, doncs, d'un document de factura i d'adscripció netament feudal, i que recull, segons una pràctica habitual a l'edat mitjana, un seguit de greuges comesos, en aquest cas, per un miles, un membre de l'estament militar, a diverses persones d'una comunitat ubicada a la zona de l'actual Solsonès., Presentamos aquí el estudio filológico de los Greuges dels homes de Sant Pere de Graudescales, un texto medieval del siglo XII (datación aproximada), escrito en catalán y cuyo original se conserva actualmente en el Archivo Capitular de la Seu d'Urgell. Se trata, pues, de un documento de factura y de adscripción netamente feudal, y que recoge, según una práctica habitual en la edad media, una serie de agravios cometidos, en este caso, por un miles, un miembro del estamento militar, a varias personas de una comunidad ubicada en la zona del actual Solsonès., Bachelor thesis for the Catalan Language and Literature program on Catalan Philology.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Experimental energy consumption of Frame Slotted ALOHA and Distributed Queuing for data collection scenarios

  • Tuset-Peiro, Pere
  • Vázquez-Gallego, Francisco
  • Alonso-Zárate, Jesús
  • Alonso Zárate, Luis Gonzaga
  • Vilajosana, Xavier
Data collection is a key scenario for the Internet of Things because it enables gathering sensor data from distributed nodes that use low-power and long-range wireless technologies to communicate in a single-hop approach. In this kind of scenario, the network is composed of one coordinator that covers a particular area and a large number of nodes, typically hundreds or thousands, that transmit data to the coordinator upon request. Considering this scenario, in this paper we experimentally validate the energy consumption of two Medium Access Control (MAC) protocols, Frame Slotted ALOHA (FSA) and Distributed Queuing (DQ). We model both protocols as a state machine and conduct experiments to measure the average energy consumption in each state and the average number of times that a node has to be in each state in order to transmit a data packet to the coordinator. The results show that FSA is more energy efficient than DQ if the number of nodes is known a priori because the number of slots per frame can be adjusted accordingly. However, in such scenarios the number of nodes cannot be easily anticipated, leading to additional packet collisions and a higher energy consumption due to retransmissions. Contrarily, DQ does not require to know the number of nodes in advance because it is able to efficiently construct an ad hoc network schedule for each collection round. This kind of a schedule ensures that there are no packet collisions during data transmission, thus leading to an energy consumption reduction above 10% compared to FSA., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Proyecto fin de carrera (BachelorThesis)

Beceroles d'una llengua : Estudi filològic dels "Greuges dels homes de Sant Pere de Graudescales"

  • Soler Cases, Manel
Presentem ací l'estudi filològic dels Greuges dels homes de Sant Pere de Graudescales, un text medieval del segle XII (datació aproximada), escrit en català i l'original del qual es conserva actualment a l'Arxiu Capitular de la Seu d'Urgell. Es tracta, doncs, d'un document de factura i d'adscripció netament feudal, i que recull, segons una pràctica habitual a l'edat mitjana, un seguit de greuges comesos, en aquest cas, per un miles, un membre de l'estament militar, a diverses persones d'una comunitat ubicada a la zona de l'actual Solsonès., Presentamos aquí el estudio filológico de los Greuges dels homes de Sant Pere de Graudescales, un texto medieval del siglo XII (datación aproximada), escrito en catalán y cuyo original se conserva actualmente en el Archivo Capitular de la Seu d'Urgell. Se trata, pues, de un documento de factura y de adscripción netamente feudal, y que recoge, según una práctica habitual en la edad media, una serie de agravios cometidos, en este caso, por un miles, un miembro del estamento militar, a varias personas de una comunidad ubicada en la zona del actual Solsonès., Bachelor thesis for the Catalan Language and Literature program on Catalan Philology.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Standardized low-power wireless communication technologies for distributed sensing applications

  • Vilajosana, Xavier
  • Tuset-Peiro, Pere
  • Vázquez Gallego, Francisco
  • Alonso-Zárate, Jesús
  • Alonso Zárate, Luis Gonzaga
Recent standardization efforts on low-power wireless communication technologies, including time-slotted channel hopping (TSCH) and DASH7 Alliance Mode (D7AM), are starting to change industrial sensing applications, enabling networks to scale up to thousands of nodes whilst achieving high reliability. Past technologies, such as ZigBee, rooted in IEEE 802.15.4, and ISO 18000-7, rooted in frame-slotted ALOHA (FSA), are based on contention medium access control (MAC) layers and have very poor performance in dense networks, thus preventing the Internet of Things (IoT) paradigm from really taking off. Industrial sensing applications, such as those being deployed in oil refineries, have stringent requirements on data reliability and are being built using new standards. Despite the benefits of these new technologies, industrial shifts are not happening due to the enormous technology development and adoption costs and the fact that new standards are not well-known and completely understood. In this article, we provide a deep analysis of TSCH and D7AM, outlining operational and implementation details with the aim of facilitating the adoption of these technologies to sensor application developers., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Standardized low-power wireless communication technologies for distributed sensing applications

  • Vilajosana i Guillén, Xavier
  • Tuset Peiró, Pere
  • Vazquez Gallego, Francisco
  • Alonso Zarate, Jesús
  • Alonso Zarate, Luis
Recent standardization efforts on low-power wireless communication technologies, including time-slotted channel hopping (TSCH) and DASH7 Alliance Mode (D7AM), are starting to change industrial sensing applications, enabling networks to scale up to thousands of nodes whilst achieving high reliability. Past technologies, such as ZigBee, rooted in IEEE 802.15.4, and ISO 18000-7, rooted in frame-slotted ALOHA (FSA), are based on contention medium access control (MAC) layers and have very poor performance in dense networks, thus preventing the Internet of Things (IoT) paradigm from really taking off. Industrial sensing applications, such as those being deployed in oil refineries, have stringent requirements on data reliability and are being built using new standards. Despite the benefits of these new technologies, industrial shifts are not happening due to the enormous technology development and adoption costs and the fact that new standards are not well-known and completely understood. In this article, we provide a deep analysis of TSCH and D7AM, outlining operational and implementation details with the aim of facilitating the adoption of these technologies to sensor application developers., info:eu-repo/semantics/publishedVersion
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Identifying the nature of surface chemical modification for directed self-assembly of block copolymers

  • Evangelio Araujo, Laura
  • Gramazio, Federico
  • Lorenzoni, Matteo|||0000-0001-5287-8761
  • Gorgoi, Michaela
  • Espinosa, Francisco Miguel
  • García, Ricardo
  • Pérez-Murano, Francesc
  • Fraxedas, Jordi|||0000-0002-2821-4831
In recent years, block copolymer lithography has emerged as a viable alternative technology for advanced lithography. In chemical-epitaxy-directed self-assembly, the interfacial energy between the substrate and each block copolymer domain plays a key role on the final ordering. Here, we focus on the experimental characterization of the chemical interactions that occur at the interface built between different chemical guiding patterns and the domains of the block copolymers. We have chosen hard X-ray high kinetic energy photoelectron spectroscopy as an exploration technique because it provides information on the electronic structure of buried interfaces. The outcome of the characterization sheds light onto key aspects of directed self-assembly: grafted brush layer, chemical pattern creation and brush/block co-polymer interface.