Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 13
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Efficient recovery-based error estimation for the smoothed finite element method for smooth and singular linear elasticity

  • González Estrada, Octavio Andrés
  • Natarajan, S.
  • J.J. Ródenas
  • Nguyen-Xuan, H.
  • Bordas, S.P.A.
[EN] An error control technique aimed to assess the quality of smoothed finite element approximations is presented in this paper. Finite element techniques based on strain smoothing appeared in 2007 were shown to provide significant advantages compared to conventional finite element approximations. In particular, a widely cited strength of such methods is improved accuracy for the same computational cost. Yet, few attempts have been made to directly assess the quality of the results obtained during the simulation by evaluating an estimate of the discretization error. Here we propose a recovery type error estimator based on an enhanced recovery technique. The salient features of the recovery are: enforcement of local equilibrium and, for singular problems a ¿smooth + singular¿ decomposition of the recovered stress. We evaluate the proposed estimator on a number of test cases from linear elastic structural mechanics and obtain efficient error estimations whose effectivities, both at local and global levels, are improved compared to recovery procedures not implementing these features., Stephane Bordas would like to thank the partial financial support of the Royal Academy of Engineering and of the Leverhulme Trust for his Senior Research Fellowship Towards the next generation surgical simulators as well as the financial support for Octavio A. Gonzalez-Estrada and Stephane Bordas from the UK Engineering Physical Science Research Council (EPSRC) under grant EP/G042705/1 Increased Reliability for Industrially Relevant Automatic Crack Growth Simulation with the eXtended Finite Element Method. Stephane Bordas also thanks partial financial support of the European Research Council Starting Independent Research Grant (ERC Stg grant agreement No. 279578) and the FP7 Initial Training Network Funding under grant number 289361 "Integrating Numerical Simulation and Geometric Design Technology, INSIST". This work has been carried out within the framework of the research project DPI2010-20542 of the Ministerio de Ciencia e Innovacion (Spain). The financial support from Universitat Politecnica de Valencia, PROMETEO/2012/023 and Generalitat Valenciana are also acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Efficient finite element methodology based on cartesian grids: application to structural shape optimization

  • Nadal, E.
  • Ródenas, Juan José|||0000-0003-2195-7920
  • Albelda Vitoria, José|||0000-0001-7365-1152
  • Tur Valiente, Manuel|||0000-0001-7683-4771
  • Tarancón Caro, José Enrique|||0000-0002-1469-5304
  • Fuenmayor Fernández, Francisco-Javier|||0000-0003-3594-9593
This work presents an analysis methodology based on the use of the Finite Element Method (FEM) nowadays considered one of the main numerical tools for solving Boundary Value Problems (BVPs). The proposed methodology, so-called cg-FEM (Cartesian grid FEM), has been implemented for fast and accurate numerical analysis of 2D linear elasticity problems. The traditional FEM uses geometry-conforming meshes; however, in cg-FEM the analysis mesh is not conformal to the geometry. This allows for defining very efficient mesh generation techniques and using a robust integration procedure, to accurately integrate the domain's geometry. The hierarchical data structure used in cg-FEM together with the Cartesian meshes allow for trivial data sharing between similar entities. The cg-FEM methodology uses advanced recovery techniques to obtain an improved solution of the displacement and stress fields (for which a discretization error estimator in energy norm is available) that will be the output of the analysis. All this results in a substantial increase in accuracy and computational efficiency with respect to the standard FEM. cg-FEM has been applied in structural shape optimization showing robustness and computational efficiency in comparison with FEM solutions obtained with a commercial code, despite the fact that cg-FEM has been fully implemented in MATLAB., This work has been developed within the framework of research project DPI2010-20542 of the Ministerio de Economia y Competitividad (Spain). The financial support of the FPU program (AP2008-01086), the funding from Universitat Politecnica de Valencia, and Generalitat Valenciana (PROMETEO/2012/023) are also acknowledged. The authors also thank the support of the Framework Programme 7 Initial Training Network Funding under Grant no. 289361 "Integrating Numerical Simulation and Geometric Design Technology."
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Stabilized method of imposing Dirichlet boundary conditions using a recovered stress field

  • Tur Valiente, Manuel|||0000-0001-7683-4771
  • Albelda Vitoria, José|||0000-0001-7365-1152
  • Ródenas, Juan José|||0000-0003-2195-7920
  • Marco, Onofre
[EN] This paper proposes a new formulation to impose Dirichlet boundary conditions on immersed boundary Cartesian Finite Element meshes. The method uses a recovered stress field calculated by Superconvergent Patch Recovery to stabilize the Lagrange multiplier formulation of the problem. The optimal convergence of the method and the convergence of the proposed iterative procedure are demonstrated. The proposed method is also suitable for problems with non-linear material behavior. Some numerical examples are included to confirm the theoretical results., The authors wish to thank the Spanish Ministerio de Economia y Competitividad for the financial support received through the project DPI2013-46317-R and Generalitat Valenciana through the project PROMETEO/2012/023. The authors are also grateful for the support of the Seventh Framework Programme Initial Training Network Funding under grant number 289361 'Integrating Numerical Simulation and Geometric Design Technology (INSIST)".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A separated representation of an error indicator for the mesh refinement process under the proper generalized decomposition framework

  • Nadal, E.
  • Leygue, A.
  • Chinesta, F.
  • Beringhier, M.
  • Ródenas, Juan José|||0000-0003-2195-7920
  • Fuenmayor Fernández, Francisco-Javier|||0000-0003-3594-9593
[EN] Today industries do not only require fast simulation techniques but also verification techniques for the simulations. The proper generalized decomposition (PGD) has been situated as a suitable tool for fast simulation for many physical phenomena. However, so far, verification tools for the PGD are under development. The PGD approximation error mainly comes from two different sources. The first one is related with the truncation of the PGD approximation and the second one is related with the discretization error of the underlying numerical technique. In this work we propose a fast error indicator technique based on recovery techniques, for the discretization error of the numerical technique used by the PGD technique, for refinement purposes., Authors 5 and 6 thank the financial support of the research Project DPI2013-46317-R of the Ministerio de Economia y Competitividad (Spain). The funding from Universitat Politecnica de Valencia and Generalitat Valenciana (PROMETEO/2012/023) are also acknowledged. These authors also thank the support of the Framework Programme 7 Initial Training Network Funding under Grant number 289361 "Integrating Numerical Simulation and Geometric Design Technology".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Sobre la utilización de códigos de elementos finitos basados en mallados cartesianos en optimización estructural, On the use of Cartesian grid finite element code in structural optimization

  • Nadal, Enrique|||0000-0002-2808-298X
  • Ródenas, Juan José|||0000-0003-2195-7920
  • Sánchez-Orgaz, Eva María|||0000-0002-8864-3056
  • López Real, Santos
  • Martí Pellicer, Just Antoni
[EN] The structural shape optimization is an iterative process built up by a higher level, which proposes the geometries to analyze, and a lower level which is in charge of analyzing, numerically, their structural response, usually by means of the Finite Element Method (FEM). These techniques normally report notorious advantages in an industrial environment, but their high computational cost is the main drawback. The efficiency of the global process requires the efficiency of both levels. This work focuses on the improvement of the efficiency of the lower level by using a methodology that uses a 2D linear elasticity code based on geometry-independent Cartesian grids, combined with FEM solution and recovery techniques, adapted to this framework. This mesh type simplifies the mesh generation and, in combination with a hierarchical data structure, reuses a great calculus amount. The recovery technique plays a double role: a) it is used in the Zienkiewicz-Zhu type error estimators allowing to quantify the FEM solution quality to guide the h-adaptive refinement process which minimizes the computational cost for a given accuracy; and b) it provides a solution, more accurate than the FEM one, that can be used. The numerical results, which include a comparative with a commercial code, show the effect of the proposed methodology improving the efficiency in the optimization process and in the solution quality., [ES] La optimización de forma estructural es un proceso iterativo constituido por un nivel superior que propone las geometrías a analizar, y un nivel inferior que evalúa numéricamente la respuesta estructural de estas, normalmente mediante el método de los elementos finitos (MEF). Estos procesos pueden reportar claros beneficios en entornos industriales pero su elevado coste computacional es un gran inconveniente. La eficiencia del proceso requiere eficiencia computacional en ambos niveles. Este trabajo se centra en la mejora del rendimiento del nivel inferior mediante una metodología que usa un código MEF para elasticidad 2D basado en mallas cartesianas independientes de la geometría, combinado con técnicas de reconstrucción de la solución a partir de la del MEF, adaptadas a este entorno. Estos mallados simplifican la generación de mallas y, con la estructura jerárquica adecuada reutilizan gran cantidad de cálculos. Las técnicas de reconstrucción juegan un doble papel: a) su uso en estimadores de error del tipo Zienkiewicz-Zhu permite cuantificar la calidad de la solución MEF para poder guiar el proceso de refinamiento h-adaptativo conducente a minimizar el coste computacional para una precisión dada, y b) proporcionan una solución, que puede ser utilizada en la práctica, más precisa que la del MEF. Los resultados numéricos, que incluyen una comparativa con un software comercial, muestran el efecto de la metodología propuesta sobre la mejora de la eficiencia de la optimización y de la calidad de la solución., Los autores agradecen el apoyo financiero recibido del proyecto de investigación DPI2010-20542 del Ministerio de Economía y Competitividad y del programa FPU (AP2008-01086), de la Universitat Politècnica de València y de la Generalitat Valenciana (PROMETEO/2012/023). Los autores también agradecen el apoyo ofrecido por el proyecto europeo INSIST (FP7-PEOPLE-2011-ITN).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Imposing Dirichlet boundary conditions in hierarchical Cartesian meshes by means of stabilized Lagrange multipliers

  • Tur Valiente, Manuel|||0000-0001-7683-4771
  • Albelda Vitoria, José|||0000-0001-7365-1152
  • Nadal, Enrique|||0000-0002-2808-298X
  • Ródenas, Juan José|||0000-0003-2195-7920
[EN] The use of Cartesian meshes independent of the geometry has some advantages over the traditional meshes used in the finite element method. The main advantage is that their use together with an appropriate hierarchical data structure reduces the computational cost of the finite element analysis. This improvement is based on the substitution of the traditional mesh generation process by an optimized procedure for intersecting the Cartesian mesh with the boundary of the domain and the use efficient solvers based on the hierarchical data structure. One major difficulty associated to the use of Cartesian grids is the fact that the mesh nodes do not, in general, lie over the boundary of the domain, increasing the difficulty to impose Dirichlet boundary conditions. In this paper, Dirichlet boundary conditions are imposed by means of the Lagrange multipliers technique. A new functional has been added to the initial formulation of the problem that has the effect of stabilizing the problem. The technique here presented allows for a simple definition of the Lagrange multipliers field that even allow us to directly condense the degrees of freedom of the Lagrange multipliers at element level., The authors acknowledge the financial support received from the research project DPI2010-20542 of the Ministerio de Economia y Competitividad. Also, we appreciated the financial support of the FPU program (AP2008-01086) of the Universitat Politecnica de Valencia and the Generalitat Valenciana (PROMETEO/2012/023). The authors are also grateful for the support of the Framework Program 7 Initial Training Network Funding under grant number 289361 'Integrating Numerical Simulation and Geometric Design Technology (INSIST)'.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Direct medical image-based Finite Element modelling for patient-specific simulation of future implants

  • Giovannelli, Luca
  • Ródenas, Juan José|||0000-0003-2195-7920
  • Navarro-Jiménez, José-Manuel|||0000-0002-7333-9377
  • Tur Valiente, Manuel|||0000-0001-7683-4771
[EN] In patient specific biomedical simulation, the numerical model is usually created after cumbersome, time consuming procedures which often require highly specialized human work and a great amount of man-hours to be carried out. In order to make numerical simulation available for medical practice, it is of primary importance to reduce the cost associated to these procedures by making them automatic. In this paper a method for the automatic creation of Finite Element (FE) models from medical images is presented. This method is based on the use of a hierarchical structure of nested Cartesian grids in which the medical image is immersed. An efficient h-adaptive procedure conforms the FE model to the image characteristics by refining the mesh on the basis of the distribution of elastic properties associated to the pixel values. As a result, a problem with a reasonable number of degrees of freedom is obtained, skipping the geometry creation stage. All the image information is taken into account during the calculation of the element stiffness matrix, therefore it is straightforward to include the material heterogeneity in the simulation. The proposed method is an adapted version of the Cartesian grid Finite Element Method (cgFEM) for the FE analysis of objects defined by images. cgFEM is an immersed boundary method that uses h-adaptive Cartesian meshes non-conforming to the boundary of the object to be analysed. The proposed methodology, used together with the original geometry-based cgFEM, allows prosthesis geometries to be easily introduced in the model providing a useful tool for evaluating the effect of future implants in a preoperative framework. The potential of this kind of technology is presented by mean of an initial implementation in 2D and 3D for linear elasticity problems., With the support of the European Union Framework Programme (FP7) under grant agreement No. 289361 'Integrating Numerical Simulation and Geometric Design Technology (INSIST)', the Ministerio de Economia y Competitividad of Spain (DPI2010-20542) and the Generalitat Valenciana (PROMETEO/2016/007).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Mesh adaptivity driven by goal-oriented locally equilibrated superconvergent patch recovery

  • González Estrada, Octavio Andrés
  • Kerfriden, P.
  • Bordas, S.P.A.
  • Nadal, Enrique|||0000-0002-2808-298X
  • Ródenas, Juan José|||0000-0003-2195-7920
  • Fuenmayor Fernández, Francisco-Javier|||0000-0003-3594-9593
[EN] Goal-oriented error estimates (GOEE) have become popular tools to quantify and control the local error in quantities of interest (QoI), which are often more pertinent than local errors in energy for design purposes (e.g. the mean stress or mean displacement in a particular area, the stress intensity factor for fracture problems). These GOEE are one of the key unsolved problems of advanced engineering applications in, for example, the aerospace industry. This work presents a simple recovery-based error estimation technique for QoIs whose main characteristic is the use of an enhanced version of the Superconvergent Patch Recovery (SPR) technique previously used for error estimation in the energy norm. This enhanced SPR technique is used to recover both the primal and dual solutions. It provides a nearly statically admissible stress field that results in accurate estimations of the local contributions to the discretisation error in the QoI and, therefore, in an accurate estimation of this magnitude. This approach leads to a technique with a reasonable computational cost that could easily be implemented into already available finite element codes, or as an independent postprocessing tool., This work was supported by the EPSRC Grant EP/G042705/1 "Increased Reliability for Industrially Relevant Automatic Crack Growth Simulation with the eXtended Finite Element Method". Stephane Bordas also thanks partial funding for his time provided by the European Research Council Starting Independent Research Grant (ERC Stg Grant Agreement No. 279578) "RealTCut Towards real time multiscale simulation of cutting in non-linear materials with applications to surgical simulation and computer guided surgery". This work has received partial support from the research project DPI2010-20542 of the Ministerio de Economia y Competitividad (Spain). The financial support of the FPU program (AP2008-01086), the funding from Universitat Politecnica de Valencia and Generalitat Valenciana (PROMETEO/2012/023) are also acknowledged. All authors also thank the partial support of the Framework Programme 7 Initial Training Network Funding under Grant No. 289361 "Integrating Numerical Simulation and Geometric Design Technology."
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Exact 3D boundary representation in finite element analysis based on Cartesian grids independent of the geometry

  • Marco Alacid, Onofre
  • Sevilla, R.
  • Zhang, Yongjie
  • Ródenas, Juan José|||0000-0003-2195-7920
  • Tur Valiente, Manuel|||0000-0001-7683-4771
[EN] This paper proposes a novel Immersed Boundary Method where the embedded domain is exactly described by using its Computer-Aided Design (CAD) boundary representation with Non-Uniform Rational B-Splines (NURBS) or T-splines. The common feature with other immersed methods is that the current approach substantially reduces the burden of mesh generation. In contrast, the exact boundary representation of the embedded domain allows to overcome the major drawback of existing immersed methods that is the inaccurate representation of the physical domain. A novel approach to perform the numerical integration in the region of the cut elements that is internal to the physical domain is presented and its accuracy and performance evaluated using numerical tests. The applicability, performance, and optimal convergence of the proposed methodology is assessed by using numerical examples in three dimensions. It is also shown that the accuracy of the proposed methodology is independent on the CAD technology used to describe the geometry of the embedded domain., With the support of the European Union Framework Program (FP7) under grant No. 289361 INSIST, Ministerio de Economia y Competitividad of Spain (DPI2010-20542)(DPI2013-46317-R), FPI program (BES-2011-044080), and Generalitat Valenciana (PROMETEO/2012/023). R. Sevilla gratefully acknowledges the financial support provided by the Ser Cymru National Research Network in Advanced Engineering and Materials. Y. Zhang was supported in part by the PECASE Award N00014-14-1-0234 and NSF CAREER Award OCI-1149591.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A recovery-explicit error estimator in energy norm for linear elasticity

  • Nadal, Enrique|||0000-0002-2808-298X
  • Ródenas, Juan José|||0000-0003-2195-7920
  • Tur Valiente, Manuel|||0000-0001-7683-4771
  • Fuenmayor Fernández, Francisco-Javier|||0000-0003-3594-9593
  • Díez, P.
[EN] Significant research effort has been devoted to produce one-sided error estimates for Finite Element Analyses, in particular to provide upper bounds of the actual error. Typically, this has been achieved using residual-type estimates. One of the most popular and simpler (in terms of implementation) techniques used in commercial codes is the recovery-based error estimator. This technique produces accurate estimations of the exact error but is not designed to naturally produce upper bounds of the error in energy norm. Some attempts to remedy this situation provide bounds depending on unknown constants. Here, a new step towards obtaining error bounds from the recovery-based estimates is proposed. The idea is (1) to use a locally equilibrated recovery technique to obtain an accurate estimation of the exact error, (2) to add an explicit-type error bound of the lack of equilibrium of the recovered stresses in order to guarantee a bound of the actual error and (3) to efficiently and accurately evaluate the constants appearing in the bounding expressions, thus providing asymptotic bounds. The numerical tests with h-adaptive refinement process show that the bounding property holds even for coarse meshes, providing upper bounds in practical applications., The authors also thank the support of the Framework Programme 7 Initial Training Network Funding under grant number 289361 "Integrating Numerical Simulation and Geometric Design Technology".
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Sobre la utilización de códigos de elementos finitos basados en mallados cartesianos en optimización estructural, On the use of Cartesian grid finite element code in structural optimization

  • Nadal, E.
  • Ródenas, J.J.
  • Sánchez-Orgaz, E.M.
  • López-Real, S.
  • Martí-Pellicer, J.
La optimización de forma estructural es un proceso iterativo constituido por un nivel superior que propone las geometrías a analizar, y un nivel inferior que evalúa numéricamente la respuesta estructural de estas, normalmente mediante el método de los elementos finitos (MEF). Estos procesos pueden reportar claros beneficios en entornos industriales pero su elevado coste computacional es un gran inconveniente. La eficiencia del proceso requiere eficiencia computacional en ambos niveles. Este trabajo se centra en la mejora del rendimiento del nivel inferior mediante una metodología que usa un código MEF para elasticidad 2D basado en mallas cartesianas independientes de la geometría, combinado con técnicas de reconstrucción de la solución a partir de la del MEF, adaptadas a este entorno. Estos mallados simplifican la generación de mallas y, con la estructura jerárquica adecuada reutilizan gran cantidad de cálculos. Las técnicas de reconstrucción juegan un doble papel: a ) su uso en estimadores de error del tipo Zienkiewicz-Zhu permite cuantificar la calidad de la solución MEF para poder guiar el proceso de refinamiento h -adaptativo conducente a minimizar el coste computacional para una precisión dada, y b ) proporcionan una solución, que puede ser utilizada en la práctica, más precisa que la del MEF. Los resultados numéricos, que incluyen una comparativa con un software comercial, muestran el efecto de la metodología propuesta sobre la mejora de la eficiencia de la optimización y de la calidad de la solución., The structural shape optimization is an iterative process built up by a higher level, which proposes the geometries to analyze, and a lower level which is in charge of analyzing, numerically, their structural response, usually by means of the Finite Element Method (FEM). These techniques normally report notorious advantages in an industrial environment, but their high computational cost is the main drawback. The efficiency of the global process requires the efficiency of both levels. This work focuses on the improvement of the efficiency of the lower level by using a methodology that uses a 2D linear elasticity code based on geometry-independent Cartesian grids, combined with FEM solution and recovery techniques, adapted to this framework. This mesh type simplifies the mesh generation and, in combination with a hierarchical data structure, reuses a great calculus amount. The recovery technique plays a double role: a ) it is used in the Zienkiewicz-Zhu type error estimators allowing to quantify the FEM solution quality to guide the h -adaptive refinement process which minimizes the computational cost for a given accuracy; and b ) it provides a solution, more accurate than the FEM one, that can be used. The numerical results, which include a comparative with a commercial code, show the effect of the proposed methodology improving the efficiency in the optimization process and in the solution quality., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A recovery-explicit error estimator in energy norm for linear elasticity

  • Nadal, E.
  • Díez, Pedro|||0000-0001-6464-6407
  • Ródenas García, Juan José
  • Tur, M
  • Fuenmayor, F. J.
Significant research effort has been devoted to produce one-sided error estimates for Finite Element Analyses, in particular to provide upper bounds of the actual error. Typically, this has been achieved using residual-type estimates. One of the most popular and simpler (in terms of implementation) techniques used in commercial codes is the recovery-based error estimator. This technique produces accurate estimations of the exact error but is not designed to naturally produce upper bounds of the error in energy norm. Some attempts to remedy this situation provide bounds depending on unknown constants. Here, a new step towards obtaining error bounds from the recovery-based estimates is proposed. The idea is (1) to use a locally equilibrated recovery technique to obtain an accurate estimation of the exact error, (2) to add an explicit-type error bound of the lack of equilibrium of the recovered stresses in order to guarantee a bound of the actual error and (3) to efficiently and accurately evaluate the constants appearing in the bounding expressions, thus providing asymptotic bounds. The numerical tests with h-adaptive refinement process show that the bounding property holds even for coarse meshes, providing upper bounds in practical applications. (C) 2015 Elsevier B.V. All rights reserved., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A recovery-explicit error estimator in energy norm for linear elasticity

  • Nadal, E.
  • Díez, Pedro
  • Ródenas García, Juan José
  • Tur, M
  • Fuenmayor, F. J.
Significant research effort has been devoted to produce one-sided error estimates for Finite Element Analyses, in particular to provide upper bounds of the actual error. Typically, this has been achieved using residual-type estimates. One of the most popular and simpler (in terms of implementation) techniques used in commercial codes is the recovery-based error estimator. This technique produces accurate estimations of the exact error but is not designed to naturally produce upper bounds of the error in energy norm. Some attempts to remedy this situation provide bounds depending on unknown constants. Here, a new step towards obtaining error bounds from the recovery-based estimates is proposed. The idea is (1) to use a locally equilibrated recovery technique to obtain an accurate estimation of the exact error, (2) to add an explicit-type error bound of the lack of equilibrium of the recovered stresses in order to guarantee a bound of the actual error and (3) to efficiently and accurately evaluate the constants appearing in the bounding expressions, thus providing asymptotic bounds. The numerical tests with h-adaptive refinement process show that the bounding property holds even for coarse meshes, providing upper bounds in practical applications. (C) 2015 Elsevier B.V. All rights reserved., Peer Reviewed, Postprint (author’s final draft)