Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Efficient recovery-based error estimation for the smoothed finite element method for smooth and singular linear elasticity

  • González Estrada, Octavio Andrés
  • Natarajan, S.
  • J.J. Ródenas
  • Nguyen-Xuan, H.
  • Bordas, S.P.A.
[EN] An error control technique aimed to assess the quality of smoothed finite element approximations is presented in this paper. Finite element techniques based on strain smoothing appeared in 2007 were shown to provide significant advantages compared to conventional finite element approximations. In particular, a widely cited strength of such methods is improved accuracy for the same computational cost. Yet, few attempts have been made to directly assess the quality of the results obtained during the simulation by evaluating an estimate of the discretization error. Here we propose a recovery type error estimator based on an enhanced recovery technique. The salient features of the recovery are: enforcement of local equilibrium and, for singular problems a ¿smooth + singular¿ decomposition of the recovered stress. We evaluate the proposed estimator on a number of test cases from linear elastic structural mechanics and obtain efficient error estimations whose effectivities, both at local and global levels, are improved compared to recovery procedures not implementing these features., Stephane Bordas would like to thank the partial financial support of the Royal Academy of Engineering and of the Leverhulme Trust for his Senior Research Fellowship Towards the next generation surgical simulators as well as the financial support for Octavio A. Gonzalez-Estrada and Stephane Bordas from the UK Engineering Physical Science Research Council (EPSRC) under grant EP/G042705/1 Increased Reliability for Industrially Relevant Automatic Crack Growth Simulation with the eXtended Finite Element Method. Stephane Bordas also thanks partial financial support of the European Research Council Starting Independent Research Grant (ERC Stg grant agreement No. 279578) and the FP7 Initial Training Network Funding under grant number 289361 "Integrating Numerical Simulation and Geometric Design Technology, INSIST". This work has been carried out within the framework of the research project DPI2010-20542 of the Ministerio de Ciencia e Innovacion (Spain). The financial support from Universitat Politecnica de Valencia, PROMETEO/2012/023 and Generalitat Valenciana are also acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Certification of projection-based reduced order modelling in computational homogenisation by the constitutive relation error

  • Kerfriden, Pierre
  • Bordas, S.P.-A.
  • Ródenas, Juan José|||0000-0003-2195-7920
In this paper, we propose upper and lower error bounding techniques for reduced order modelling applied to the computational homogenisation of random composites. The upper bound relies on the construction of a reduced model for the stress field. Upon ensuring that the reduced stress satisfies the equilibrium in the finite element sense, the desired bounding property is obtained. The lower bound is obtained by defining a hierarchical enriched reduced model for the displacement. We show that the sharpness of both error estimates can be seamlessly controlled by adapting the parameters of the corresponding reduced order model., The authors acknowledge the financial support of EPSRC under grant EP/J01947X/1: Towards rationalised computational expense for simulating fracture over multiple scales (RationalMSFrac) and the support of the European Research Council under Starting Independent Research Grant agreement No. 279578: Towards real time multiscale simulation of cutting in non-linear materials with applications to surgical simulation and computer guided surgery (RealTCut).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Enhanced error estimator based on a nearly equilibrated moving least squares recovery technique for FEM and XFEM

  • Ródenas, Juan José|||0000-0003-2195-7920
  • Fuenmayor Fernández, Francisco-Javier|||0000-0003-3594-9593
  • González Estrada, Octavio Andrés
  • Chinesta, F.
In this paper a new technique aimed to obtain accurate estimates of the error in energy norm using a moving least squares (MLS) recovery-based procedure is presented. In the techniques based on the superconvergent patch recovery (SPR) the continuity of the recovered field is provided by the shape functions of the underlying mesh. We explore the capabilities of a recovery technique based on an MLS fitting, more flexible than SPR techniques as it directly provides continuous interpolated fields without relying on any FE mesh, to obtain estimates of the error in energy norm as an alternative to SPR. In the enhanced MLS proposed in the paper, boundary equilibrium is enforced using a nearest point approach that modifies the MLS functional. Lagrange multipliers are used to impose a nearly exact satisfaction of the internal equilibrium equation. The numerical results indicate the high accuracy of the proposed error., This work has been carried within the framework of the research project DPI2010-20542 of the Ministerio de Ciencia y e Innovacion (Spain). The financial support of the Universitat Politecnica de Valencia and Generalitat Valenciana (PROMETEO/2012/023) is also acknowledged. Support from the EPSRC grant EP/G042705/1 "Increased Reliability for Industrially Relevant Automatic Crack Growth Simulation with the eXtended Finite Element Method", the European Research Council Starting Independent Research Grant (ERC Stg grant agreement No. 279578) "RealTCut Towards real time multi-scale simulation of cutting in non-linear materials with applications to surgical simulation and computer guided surgery" and partial support of the Framework Programme 7 Initial Training Network Funding under grant number 289361 "Integrating Numerical Simulation and Geometric Design Technology (INSIST)" are acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Locally equilibrated stress recovery for goal oriented error estimation in the extended finite element method

  • González Estrada, Octavio Andrés
  • Bordas, S.P.A.
  • Nadal, E.
  • Kerfriden, P.
  • Ródenas, Juan José|||0000-0003-2195-7920
  • Fuenmayor Fernández, Francisco-Javier|||0000-0003-3594-9593
[EN] Goal oriented error estimation and adaptive procedures are essential for the accurate and efficient evaluation of finite element numerical simulations that involve complex domains. By locally improving the approximation quality, for example, by using the extended finite element method (XFEM), we can solve expensive problems which could result intractable otherwise. Here, we present an error estimation technique for enriched finite element approximations that is based on an equilibrated recovery technique, which considers the stress intensity factor as the quantity of interest. The locally equilibrated superconvergent patch recovery is used to obtain enhanced stress fields for the primal and dual problems defined to evaluate the error estimate., This work was supported by the EPSRC grant EP/G042705/1 "Increased Reliability for Industrially Relevant Automatic Crack Growth Simulation with the eXtended Finite Element Method". Stephane Bordas also thanks partial funding for his time provided by the European Research Council Starting Independent Research Grant (ERC Stg Grant Agreement No. 279578) "RealTCut Towards real time multiscale simulation of cutting in non-linear materials with applications to surgical simulation and computer guided surgery". This work has been carried out within the framework of the research project DPI2010-20542 of the Ministerio de Ciencia e Innovacion (Spain). The financial support of the FPU program (AP2008-01086), the funding from Universitat Politecnica de Valencia and Generalitat Valenciana (PROMETEO/2012/023) are also acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Mesh adaptivity driven by goal-oriented locally equilibrated superconvergent patch recovery

  • González Estrada, Octavio Andrés
  • Kerfriden, P.
  • Bordas, S.P.A.
  • Nadal, Enrique|||0000-0002-2808-298X
  • Ródenas, Juan José|||0000-0003-2195-7920
  • Fuenmayor Fernández, Francisco-Javier|||0000-0003-3594-9593
[EN] Goal-oriented error estimates (GOEE) have become popular tools to quantify and control the local error in quantities of interest (QoI), which are often more pertinent than local errors in energy for design purposes (e.g. the mean stress or mean displacement in a particular area, the stress intensity factor for fracture problems). These GOEE are one of the key unsolved problems of advanced engineering applications in, for example, the aerospace industry. This work presents a simple recovery-based error estimation technique for QoIs whose main characteristic is the use of an enhanced version of the Superconvergent Patch Recovery (SPR) technique previously used for error estimation in the energy norm. This enhanced SPR technique is used to recover both the primal and dual solutions. It provides a nearly statically admissible stress field that results in accurate estimations of the local contributions to the discretisation error in the QoI and, therefore, in an accurate estimation of this magnitude. This approach leads to a technique with a reasonable computational cost that could easily be implemented into already available finite element codes, or as an independent postprocessing tool., This work was supported by the EPSRC Grant EP/G042705/1 "Increased Reliability for Industrially Relevant Automatic Crack Growth Simulation with the eXtended Finite Element Method". Stephane Bordas also thanks partial funding for his time provided by the European Research Council Starting Independent Research Grant (ERC Stg Grant Agreement No. 279578) "RealTCut Towards real time multiscale simulation of cutting in non-linear materials with applications to surgical simulation and computer guided surgery". This work has received partial support from the research project DPI2010-20542 of the Ministerio de Economia y Competitividad (Spain). The financial support of the FPU program (AP2008-01086), the funding from Universitat Politecnica de Valencia and Generalitat Valenciana (PROMETEO/2012/023) are also acknowledged. All authors also thank the partial support of the Framework Programme 7 Initial Training Network Funding under Grant No. 289361 "Integrating Numerical Simulation and Geometric Design Technology."
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

On the role of enrichment and statical admissibility of recovered fields in a-posteriori error estimation for enriched finite element methods

  • González Estrada, Octavio Andrés
  • Bordas, Stéphane Pierre Alain
  • Duflot, Marc
  • Kerfriden, Pierre
  • Ródenas, Juan José|||0000-0003-2195-7920
  • Giner Maravilla, Eugenio|||0000-0003-1903-6495
Purpose The purpose of this paper is to assess the effect of the statical admissibility of the recovered solution and the ability of the recovered solution to represent the singular solution; also the accuracy, local and global effectivity of recovery-based error estimators for enriched finite element methods (e.g. the extended finite element method, XFEM). Design/methodology/approach The authors study the performance of two recovery techniques. The first is a recently developed superconvergent patch recovery procedure with equilibration and enrichment (SPR-CX). The second is known as the extended moving least squares recovery (XMLS), which enriches the recovered solutions but does not enforce equilibrium constraints. Both are extended recovery techniques as the polynomial basis used in the recovery process is enriched with singular terms for a better description of the singular nature of the solution. Findings Numerical results comparing the convergence and the effectivity index of both techniques with those obtained without the enrichment enhancement clearly show the need for the use of extended recovery techniques in Zienkiewicz-Zhu type error estimators for this class of problems. The results also reveal significant improvements in the effectivities yielded by statically admissible recovered solutions., Stéphane Bordas would like to thank the Royal Academy of Engineering and of the Leverhulme Trust for supporting his Senior Research Fellowship entitled “Towards the next generation surgical simulators” as well as the EPSRC for support under grant EP/G042705/1 Increased Reliability for Industrially Relevant Automatic Crack Growth Simulation with the eXtended Finite Element Method.This work has been carried out within the framework of the research projects DPI2007‐66773‐C02‐01, DPI2010‐20542 and DPI2010‐20990 of the Ministerio de Ciencia e Innovacion (Spain). Funding from Feder, Universitat Politecnica de Valencia and Generalitat Valenciana is also acknowledged.
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

XLME interpolants, a seamless bridge between XFEM and enriched meshless methods

  • Amiri, Fatemeh
  • Anitescu, C
  • Arroyo Balaguer, Marino|||0000-0003-1647-940X
  • Bordas, S P A
  • Rabczuk, Timon
In this paper, we develop a method based on local maximum entropy shape functions together with enrichment functions used in partition of unity methods to discretize problems in linear elastic fracture mechanics. We obtain improved accuracy relative to the standard extended finite element method at a comparable computational cost. In addition, we keep the advantages of the LME shape functions, such as smoothness and non-negativity. We show numerically that optimal convergence (same as in FEM) for energy norm and stress intensity factors can be obtained through the use of geometric (fixed area) enrichment with no special treatment of the nodes near the crack such as blending or shifting., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

XLME interpolants, a seamless bridge between XFEM and enriched meshless methods

  • Amiri, Fatemeh
  • Anitescu, C
  • Arroyo Balaguer, Marino
  • Bordas, S P A
  • Rabczuk, Timon
In this paper, we develop a method based on local maximum entropy shape functions together with enrichment functions used in partition of unity methods to discretize problems in linear elastic fracture mechanics. We obtain improved accuracy relative to the standard extended finite element method at a comparable computational cost. In addition, we keep the advantages of the LME shape functions, such as smoothness and non-negativity. We show numerically that optimal convergence (same as in FEM) for energy norm and stress intensity factors can be obtained through the use of geometric (fixed area) enrichment with no special treatment of the nodes near the crack such as blending or shifting., Peer Reviewed, Postprint (author’s final draft)