Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Control of the finite element discretization error during the convergence of structural shape optimization algorithms

  • Bugeda, Gabriel
  • Oñate, Eugenio
  • Ródenas, Juan José|||0000-0003-2195-7920
  • Albelda Vitoria, José|||0000-0001-7365-1152
[EN] This work analyzes the influence of the discretization error contained in the Finite Element (FE) analyses of each design configuration proposed by structural shape optimization algorithms over the behaviour of the algorithm. If the FE analyses are not accurate enough, the final solution will neither be optimal nor satisfy the constraints. The need for the use of adaptive FE analysis techniques in shape optimum design will be shown. The paper also proposes the use of the algorithm described in [1] in order to reduce the computational cost associated to the adaptive FE analysis of each geometrical configuration when evolutive optimization algorithms are used.¿, The authors have been sponsored by the Spanish Ministerio de Ciencia e Innovación through the projects DPI2008-05250 (first author) and DPI2007-66773-C02-01 (second and third authors). The second and third authors have also been sponsored by the Generalitat Valenciana and the Universidad Politécnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Accurate recovery-based error upper bounds for the extended finite element framework

  • Ródenas, Juan José|||0000-0003-2195-7920
  • Fuenmayor Fernández, Francisco-Javier|||0000-0003-3594-9593
  • Gonzalez-Estrada, O.A.
  • Díez, P.
[EN] This paper introduces a recovery-type error estimator yielding upper bounds of the error in energy norm for linear elastic fracture mechanics problems solved using the extended finite element method (XFEM) The paper can be considered as an extension and enhancement of a previous work in which the upper bounds of the error were developed in a FEM framework The upper bound property requires the recovered solution to be equilibrated and continuous The proposed technique consists of using a recovery technique, especially adapted to the XFEM framework that yields equilibrium at a local level (patch by patch) Then a postprocess based on the partition of unity concept is used to obtain continuity The result is a very accurate but only nearly-statically admissible recovered stress field, with small equilibrium defaults introduced by the postprocess Sharp upper bounds are obtained using a new methodology accounting for the equilibrium defaults, as demonstrated by the numerical tests, This work has been carried out within the framework of the research projects DPI2007-66773-C02-01, DPI2007-66995-C03-02 and DPI2007-62395 of the Ministerio de Educacion y Ciencia (Spain). The financial support of the Generalitat Valenciana and the Universidad Politecnica de Valencia is also acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A recovery-type error estimator for the extended finite element method based on singular+smooth stress field splitting

  • Ródenas, Juan José|||0000-0003-2195-7920
  • Tarancón Caro, José Enrique|||0000-0002-1469-5304
  • Fuenmayor Fernández, Francisco-Javier|||0000-0003-3594-9593
  • González-Estrada, O.A.
[EN] A new stress recovery procedure that provides accurate estimations of the discretization error for linear elastic fracture mechanic problems analyzed with the extended finite element method (XFEM) is presented. The procedure is an adaptation of the superconvergent patch recovery (SPR) technique for the XFEM framework. It is based oil three fundamental aspects: (a) the use of a singular+smooth stress field decomposition technique involving the use of different recovery methods (or each field: standard SPR for the smooth field and reconstruction of the recovered singular field using the stress intensity factor K for the singular field: (b) direct calculation of smoothed stresses at integation points using conjoint polynomial enhancement and (c) assembly of patches with elements intersected by the crack using different stress interpolation polynomials at each side of the crack. The method was validated by testing it oil problems with an exact solution in mode I, mode II, and mixed mode and oil it problem without analytical solution. The results obtained showed the accuracy of the proposed error estimator., This paper was developed within the framework of the research projects DP12007-66773-C02-01 and DPI2007-66995-C03-02 of the Ministerio de Educacion y Ciencia (Spain). Funding was also received from the Generalitat Valenciana and the Universidad Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Sobre la necesidad de controlar el error de discretización de elementos finitos en optimización de forma estructural con algoritmos evolutivos

  • Ródenas, Juan José|||0000-0003-2195-7920
  • Albelda Vitoria, José|||0000-0001-7365-1152
  • Nadal, Enrique|||0000-0002-2808-298X
  • Bugeda, Gabriel
  • Oñate, Eugenio
[ES] Este trabajo analiza la influencia del nivel de error de discretización de los análisis por elementos finitos (MEF) de las distintas configuraciones geométricas propuestas por los algoritmos de optimización de forma estructural sobre el comportamiento de dichos algoritmos. El artículo demuestra claramente que si los análisis mediante el MEF no presentan la suficiente precisión, la solución final proporcionada por el algoritmo de optimización no será ni el óptimo buscado ni cumplirá con las restricciones impuestas. Se demostrará la necesidad de la utilización de técnicas del MEF basadas en remallados adaptables. El artículo propone la combinación de dos estrategias para reducir el coste computacional relacionado con la utilización de dichos remallados adaptables junto con algoritmos evolutivos de optimización: (a) la utilización del algoritmo descrito por Bugeda et al. [1] que reduce el coste computacional asociado al análisis de cada configuración geométrica mediante el MEF con remallados adaptables y, (b) el incremento paulatino de la precisión requerida a cada análisis a fin de obtener una reducción sustancial del coste computacional en las etapas iniciales del proceso de optimización., Los autores primero, tercero y quinto agradecen el soporte económico recibido para el desarrollo de este artículo a través de los proyectos de investigación DPI2007-66773-C02-01 y DPI2010-20542 del Ministerio de Educación y Ciencia (Espana) y los fondos ˜ recibidos de la Generalitat Valenciana y de la Universitat Politècnica de València. El segundo autor agradece el soporte económico recibido para el desarrollo de este artículo a través del proyecto de investigación DPI2008-05250 del Ministerio de Educación y Ciencia (Espana).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

On the need for the use of error-controlled finite element analyses in structural shape optimization processes

  • Ródenas, Juan José|||0000-0003-2195-7920
  • Albelda Vitoria, José|||0000-0001-7365-1152
  • Bugeda Castelltort, Gabriel
  • Oñate Ibáñez de Navarra, Eugenio
This work analyzes the influence of the discretization error associated with the finite element (FE) analyses of each design configuration proposed by the structural shape optimization algorithms over the behavior of the algorithm. The paper clearly shows that if FE analyses are not accurate enough, the final solution provided by the optimization algorithm will neither be optimal nor satisfy the constraints. The need for the use of adaptive FE analysis techniques in shape optimum design will be shown. The paper proposes the combination of two strategies to reduce the computational cost related to the use of mesh adaptivity in evolutionary optimization algorithms: (a) the use of an algorithm for the mesh generation by projection of the discretization error, which reduces the computational cost associated with the adaptive FE analysis of each geometrical configuration and (b) the successive increase of the required accuracy of the FE analyses in order to obtain a considerable reduction of the computational cost in the early stages of the optimization process., The second author is grateful for the financial support received for the development of this paper through the research project DPI2008-05250 of the Ministerio de Ciencia e Innovacion (Spain).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

On the role of enrichment and statical admissibility of recovered fields in a-posteriori error estimation for enriched finite element methods

  • González Estrada, Octavio Andrés
  • Bordas, Stéphane Pierre Alain
  • Duflot, Marc
  • Kerfriden, Pierre
  • Ródenas, Juan José|||0000-0003-2195-7920
  • Giner Maravilla, Eugenio|||0000-0003-1903-6495
Purpose The purpose of this paper is to assess the effect of the statical admissibility of the recovered solution and the ability of the recovered solution to represent the singular solution; also the accuracy, local and global effectivity of recovery-based error estimators for enriched finite element methods (e.g. the extended finite element method, XFEM). Design/methodology/approach The authors study the performance of two recovery techniques. The first is a recently developed superconvergent patch recovery procedure with equilibration and enrichment (SPR-CX). The second is known as the extended moving least squares recovery (XMLS), which enriches the recovered solutions but does not enforce equilibrium constraints. Both are extended recovery techniques as the polynomial basis used in the recovery process is enriched with singular terms for a better description of the singular nature of the solution. Findings Numerical results comparing the convergence and the effectivity index of both techniques with those obtained without the enrichment enhancement clearly show the need for the use of extended recovery techniques in Zienkiewicz-Zhu type error estimators for this class of problems. The results also reveal significant improvements in the effectivities yielded by statically admissible recovered solutions., Stéphane Bordas would like to thank the Royal Academy of Engineering and of the Leverhulme Trust for supporting his Senior Research Fellowship entitled “Towards the next generation surgical simulators” as well as the EPSRC for support under grant EP/G042705/1 Increased Reliability for Industrially Relevant Automatic Crack Growth Simulation with the eXtended Finite Element Method.This work has been carried out within the framework of the research projects DPI2007‐66773‐C02‐01, DPI2010‐20542 and DPI2010‐20990 of the Ministerio de Ciencia e Innovacion (Spain). Funding from Feder, Universitat Politecnica de Valencia and Generalitat Valenciana is also acknowledged.