Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Microstructure and mechanical effects of spark plasma sintering in alumina monolithic ceramics

  • Alvarez-Clemares, I.
  • Agouram, S.
  • Torrecillas, R.
  • Fernandez, A.
  • Borrell Tomás, María Amparo|||0000-0003-4292-4538
The specific effects of spark plasma sintering (SPS) on the creep behavior, microstructure and mechanical properties of alumina monolithic ceramic were investigated. SPS introduces strains that concentrate at grain boundaries and inhibit crack growth, resulting in an improvement in the flexural strength and fracture toughness. However, creep blocks grain boundary movements and decreases the reliability of the material. These strains can be removed by a post-sintering thermal treatment, which plays an important role in the distribution of dislocations. Crown Copyright (c) 2012 Published by Elsevier Ltd. on behalf of Acta Materialia Inc. All rights reserved., The authors would like to acknowledge the help of the EU for the financial support received under the IP-NANOKER NMP3-CT-2005-515784. A.B. acknowledges the Spanish Ministry of Science and Innovation for her Juan de la Cierva Contract (JCI-2011-10498). The authors are grateful to the Central Support Service in Experimental Research (SCSIE), University of Valencia for providing the HR-TEM facility.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Alumina reinforced eucryptite ceramics: Very low thermal expansion material with improved mechanical properties

  • García-Moreno, Olga
  • Bittmann, Birgit
  • Fernández-Valdés, Adolfo
  • Torrecillas San Millán, Ramón
  • Borrell Tomás, María Amparo|||0000-0003-4292-4538
[EN] Composite materials formed by a LAS matrix reinforced with second phases are promising materials in many applications where better mechanical properties than those corresponding to conventional low thermal expansion coefficient materials are required. In this study we will show the capability of the design of a LAS-alumina submicron composite. The main scope of this work is to test the sinterability of the composites and to design a composition for a very low thermal expansion submicron composite. For this purpose, Taimei alumina (TM-DAR) powders and an ad hoc synthesized beta-eucryptite phase were used to fabricate the composite. XRD phase compositions and microstructures are discussed together with data from dilatometries in a wide temperature range. The results obtained show the possibility of designing a submicron composite with a very low thermal expansion coefficient and improved mechanical properties that can be used in oxidizing conditions. (C) 2011 Elsevier Ltd. All rights reserved., We would like to thank Prof. Salvador de Aza and Prof. Serafin Moya for the thorough discussion of LAS-Al<INF>2</INF>O<INF>3</INF> solid state compatibility and comments on a first version of the manuscript. The authors greatly appreciate the support of the EU for the IP-Nanoker NMP3-CT-2005-515784 in the frame of the 6th Framework Program. Garcia-Moreno is working for CSIC under a JAE-Doc contract co-funded by the ESF. A. Borrell is working with financial support of National Plan Project MAT2006-01783 under FPI contract.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Microstructural design for mechanical and electrical properties of Spark Plasma Sintered Al2O3-SiC nanocomposites

  • Borrell Tomás, María Amparo|||0000-0003-4292-4538
  • Alvarez, I.
  • Torrecillas, R.
  • Rocha, V. G.
  • Fernandez, A.
[EN] Al2O3-17 vol.% SiC nanocomposites were prepared by powder mixture of submicrosized alpha-Al2O3, nanosized gamma-Al2O3 and different nanosized beta-SiC. Materials were sintered by spark plasma sintering (SPS) technique at two temperatures (1400-1550 degrees C) and their electrical conductivity and mechanical properties were investigated. High-density composites have been achieved even at the lowest sintering temperatures and the microstructure characterization shows SiC particles located both within the Al2O3 matrix grains and/or at the Al2O3 grain boundaries. It has been demonstrated that microstructure tailoring is possible by suitable selection of starting materials and fast sintering by SPS. Accurate design of nanocomposites microstructures allows obtaining moderately conductive (<100 Omega cm) or insulating (10(8) Omega cm) materials while the chemical composition is similar. Crown Copyright (C) 2011 Published by Elsevier B.V. All rights reserved., Financial support of this work by the European Commission is gratefully acknowledged (IP Nanoker P3-CT-2005-515784). A. Borrell acknowledges the Spanish Ministry of Science and Innovation for Ph.D. grant (MAT2006-01783).