Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 11
Encontrada(s) 1 página(s)

Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Modelling the vertical distribution of canopy fuel load using national forest inventory and low-density airbone laser scanning data

  • González Ferreiro, Eduardo
  • Arellano Pérez, Stéfano
  • Castedo Dorado, Fernando
  • Hevia Cabal, Andrea
  • Vega, José Antonio
  • Vega-Nieva, Daniel Jose
  • Álvarez González, Juan Gabriel
  • Ruiz González, Ana Daría
The fuel complex variables canopy bulk density and canopy base height are often used to predict crown fire initiation and spread. Direct measurement of these variables is impractical, and they are usually estimated indirectly by modelling. Recent advances in predicting crown fire behaviour require accurate estimates of the complete vertical distribution of canopy fuels. The objectives of the present study were to model the vertical profile of available canopy fuel in pine stands by using data from the Spanish national forest inventory plus lowdensity airborne laser scanning (ALS) metrics. In a first step, the vertical distribution of the canopy fuel load was modelled using the Weibull probability density function. In a second step, two different systems of models were fitted to estimate the canopy variables defining the vertical distributions; the first system related these variables to stand variables obtained in a field inventory, and the second system related the canopy variables to airborne laser scanning metrics. The models of each system were fitted simultaneously to compensate the effects of the inherent cross-model correlation between the canopy variables. Heteroscedasticity was also analyzed, but no correction in the fitting process was necessary. The estimated canopy fuel load profiles from field variables explained 84% and 86% of the variation in canopy fuel load for maritime pine and radiata pine respectively; whereas the estimated canopy fuel load profiles from ALS metrics explained 52% and 49% of the variation for the same species. The proposed models can be used to assess the effectiveness of different forest management alternatives for reducing crown fire hazard.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Potential of Sentinel-2A data to model surface and canopy fuel characteristics in relation to crown fire hazard

  • Arellano Pérez, Stéfano
  • Castedo Dorado, Fernando
  • López Sánchez, Carlos Antonio
  • González Ferreiro, Eduardo
  • Yang, Zhiqiang
  • Díaz Varela, Ramón Alberto
  • Álvarez González, Juan Gabriel
  • Vega, José Antonio
  • Ruiz González, Ana Daría
Background: Crown fires are often intense and fast spreading and hence can have serious impacts on soil, vegetation, and wildlife habitats. Fire managers try to prevent the initiation and spread of crown fires in forested landscapes through fuel management. The minimum fuel conditions necessary to initiate and propagate crown fires are known to be strongly influenced by four stand structural variables: surface fuel load (SFL), fuel strata gap (FSG), canopy base height (CBH), and canopy bulk density (CBD). However, there is often a lack of quantitative data about these variables, especially at the landscape scale. Methods: In this study, data from 123 sample plots established in pure, even-aged, Pinus radiata and Pinus pinaster stands in northwest Spain were analyzed. In each plot, an intensive field inventory was used to characterize surface and canopy fuels load and structure, and to estimate SFL, FSG, CBH, and CBD. Equations relating these variables to Sentinel-2A (S-2A) bands and vegetation indices were obtained using two non-parametric techniques: Random Forest (RF) and Multivariate Adaptive Regression Splines (MARS). Results: According to the goodness-of-fit statistics, RF models provided the most accurate estimates, explaining more than 12%, 37%, 47%, and 31% of the observed variability in SFL, FSG, CBH, and CBD, respectively. To evaluate the performance of the four equations considered, the observed and estimated values of the four fuel variables were used separately to predict the potential type of wildfire (surface fire, passive crown fire, or active crown fire) for each plot, considering three different burning conditions (low, moderate, and extreme). The results of the confusion matrix indicated that 79.8% of the surface fires and 93.1% of the active crown fires were correctly classified; meanwhile, the highest rate of misclassification was observed for passive crown fire, with 75.6% of the samples correctly classified. Conclusions: The results highlight that the combination of medium resolution imagery and machine learning techniques may add valuable information about surface and canopy fuel variables at large scales, whereby crown fire potential and the potential type of wildfire can be classified
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Individual-Tree and Stand-Level Models for Estimating Ladder Fuel Biomass Fractions in Unpruned Pinus radiata Plantations

  • Alonso Rego, Cecilia
  • Fernandes, Paulo
  • Álvarez González, Juan Gabriel
  • Arellano Pérez, Stéfano
  • Ruiz González, Ana Daría
The mild climate and, in recent decades, the increased demand for timber have favoured the establishment of extensive plantations of fast-growing species such as Pinus radiata in Galicia (a fire-prone region in northwestern Spain). This species is characterised by very poor self-pruning; unmanaged pine stands have a worrying vertical continuity of fuels after crown closure because the dead lower branches accumulate large amounts of fine dead biomass including twigs and suspended needles. Despite the important contribution of these dead ladder fuels to the overall canopy biomass and to crown-fire hazards, equations for estimating these fuels have not yet been developed. In this study, two systems of equations for estimating dead ladder fuel according to size class and the vertical distribution in the first 6 m of the crown were fitted: a tree-level system based on individual tree and stand variables and a stand-level system based only on stand variables. The goodness-of-fit statistics for both model systems indicated that the estimates were robust and accurate. At the tree level, fuel biomass models explained between 35% and 59% of the observed variability, whereas cumulative fuel biomass models explained between 62% and 81% of the observed variability. On the other hand, at the stand level, fuel-load models explained between 88% and 98% of the observed variability, whereas cumulative fuel-load models explained more than 98% of the total observed variability. These systems will therefore allow managers to adequately quantify the dead ladder fuels in pure Pinus radiata stands and to identify the treatments required to reduce crown-fire hazard.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Growing stock monitoring by European National Forest Inventories: Historical origins, current methods and harmonisation

  • Alberdi, Iciar
  • Gschwantner, Thomas
  • Bauwens, Sebastien
  • Bender, Susann
  • Borota, Dragan
  • Bosela, Michal
  • Bouriaud, Olivier
  • Breidenbach, Johannes
  • Donis, Janis
  • Fischer, Christoph
  • Gasparini, P.
  • Heffernan, Luke
  • Hervé, Jean-Christophe
  • Kolozs, Laszlo
  • Korhonen, Kari T.
  • Koutsias, Nikos
  • Kovacsevics, Pál
  • Kucera, Milos
  • Kulbokas, Gintaras
  • Kuliesis, Andrius
  • Lanz, Adrian
  • Philippe Lejeune
  • Lind, Torgny
  • Marin, Gheorghe
  • Morneau, François
  • Nord-Larsen, Thomas
  • Nunes, Leónia
  • Pantic, Damjan
  • Redmond, John
  • Castro Rego, Francisco
  • Riedel, Thomas
  • Sebeň, Vladimír
  • Sims, Allan
  • Skudnik, Mitja
  • Tomter, Stein M.
22 Pág., Wood resources have been essential for human welfare throughout history. Also nowadays, the volume of growing stock (GS) is considered one of the most important forest attributes monitored by National Forest Inventories (NFIs) to inform policy decisions and forest management planning. The origins of forest inventories closely relate to times of early wood shortage in Europe causing the need to explore and plan the utilisation of GS in the catchment areas of mines, saltworks and settlements. Over time, forest surveys became more detailed and their scope turned to larger areas, although they were still conceived as stand-wise inventories. In the 1920s, the first sample-based NFIs were introduced in the northern European countries. Since the earliest beginnings, GS monitoring approaches have considerably evolved. Current NFI methods differ due to country-specific conditions, inventory traditions, and information needs. Consequently, GS estimates were lacking international comparability and were therefore subject to recent harmonisation efforts to meet the increasing demand for consistent forest resource information at European level. As primary large-area monitoring programmes in most European countries, NFIs assess a multitude of variables, describing various aspects of sustainable forest management, including for example wood supply, carbon sequestration, and biodiversity. Many of these contemporary subject matters involve considerations about GS and its changes, at different geographic levels and time frames from past to future developments according to scenario simulations. Due to its historical, continued and currently increasing importance, we provide an up-to-date review focussing on large-area GS monitoring where we i) describe the origins and historical development of European NFIs, ii) address the terminology and present GS definitions of NFIs, iii) summarise the current methods of 23 European NFIs including sampling methods, tree measurements, volume models, estimators, uncertainty components, and the use of air- and space-borne data sources, iv) present the recent progress in NFI harmonisation in Europe, and v) provide an outlook under changing climate and forest-based bioeconomy objectives., The work was partly conducted during the DIABOLO (2015) project. DIABOLO has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement no. 633464. Subsequent continuation and finalisation of the manuscript. IA was supported by Agreement EG12-0073 between INIA and the Spanish Ministry of Ecological Transition, and MB by the Slovak Research and Development Agency via project no. APVV-19–0183., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Analyzing the joint effect of forest management and wildfires on living biomass and carbon stocks in Spanish forests

  • Adame, P.
  • Cañellas, Isabel
  • Moreno-Fernández, Daniel
  • Packalen, T.
  • Hernández Mateo, Laura
  • Alberdi, Iciar
35 Pág., Research Highlights: This is the first study that has considered forest management and wildfires in the balance of living biomass and carbon stored in Mediterranean forests. Background and Objectives: The Kyoto Protocol and Paris Agreement request countries to estimate and report carbon emissions and removals from the forest in a transparent and reliable way. The aim of this study is to forecast the carbon stored in the living biomass of Spanish forests for the period 2000–2050 under two forest management alternatives and three forest wildfires scenarios. Materials and Methods: To produce these estimates, we rely on data from the Spanish National Forest Inventory (SNFI) and we use the European Forestry Dynamics Model (EFDM). SNFI plots were classified according to five static (forest type, known land-use restrictions, ownership, stand structure and bioclimatic region) and two dynamic factors (quadratic mean diameter and total volume). The results were validated using data from the latest SNFI cycle (20-year simulation). Results: The increase in wildfire occurrence will lead to a decrease in biomass/carbon between 2000 and 2050 of up to 22.7% in the medium–low greenhouse gas emissions scenario (B2 scenario) and of up to 32.8% in the medium–high greenhouse gas emissions scenario (A2 scenario). Schoolbook allocation management could buffer up to 3% of wildfire carbon loss. The most stable forest type under both wildfire scenarios are Dehesas. As regards bioregions, the Macaronesian area is the most affected and the Alpine region, the least affected. Our validation test revealed a total volume underestimation of 2.2% in 20 years. Conclusions: Forest wildfire scenarios provide more realistic simulations in Mediterranean forests. The results show the potential benefit of forest management, with slightly better results in schoolbook forest management compared to business-as-usual forest management. The EFDM harmonized approach simulates the capacity of forests to store carbon under different scenarios at national scale in Spain, providing important information for optimal decision-making on forest-related policies., This research was funded by the European Union’s Horizon 2020 research and innovation program (Grant No. 633464 “Distributed, Integrated and Harmonized Forest Information for Bioeconomy Outlooks (DIABOLO)”); by the Spanish National Funding Agency (Grant No. AGL2016-76769-C2-1-R. “Influencia del régimen de perturbaciones y la gestión en el balance de carbono, estructura y dinámica de las masas forestales”) and by the Spanish Ministry of Agriculture, Fishing and Food (Encomienda de gestión EG17-042 “Soporte científico a la generación de información Forestal”)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Deadwood stocks in south-western European forests: Ecological patterns and large scale assessments

  • Alberdi, Iciar
  • Moreno-Fernández, Daniel
  • Cañellas, Isabel
  • Adame, P.
  • Hernández Mateo, Laura
12 Pág., Forest deadwood is a relevant factor in the provision of ecosystem services (forest biodiversity, carbon sequestration, recreational and aesthetic values), but it also influences the risk and impact of forest perturbations. Hence, reliable estimations are urgently need in the lack of detailed information in Mediterranean forests at large scales. In this study we provide, for the first time, national-level estimations for Spain based on the information from the Spanish National Forest Inventory (38,945 plots). In addition, we compare and validate two approaches for estimating deadwood stocks where data is lacking; the first of these being a modelling approach based on stand, climatic and physiographical variables, and the other considers the ratio between deadwood and living biomass. We also examine the different patterns stock across forest types in four biogeographical regions according to a broad-spectrum of species groups and forests with different degrees of anthropogenic influence. The degrees are based on levels of protection and naturalness categories. The modelling approach provides more robust deadwood estimates and better predictive capacity than the ratio approach. Alpine (6.09 Mg.ha-1) and Atlantic (3.53 Mg.ha-1) bioregion forests store significantly higher mean deadwood biomass stocks than Macaronesian and Mediterranean forests. However, the share of deadwood in relation to the total biomass stock is greater in Mediterranean biogeographical region. As regards species groups, the mean deadwood stock of mixed forests doubled the stocks found in conifer and broadleaved dominated forests. We also found significant differences in deadwood biomass stocks between forests with different levels of anthropogenic protection. However, forest types with intensive forest management had contrasting figures for deadwood stock. The mean values obtained at national level according to forest type, bioregion and degree of anthropogenic influence, provide baseline information for carbon accounting as well as for other forest policy planning and management strategies., This work was supported by the Agreement EG12-0073 between INIA and Ministry of Ecological Transition, and DIABOLO project (European Union's Horizon 2020 research and innovation programme under grant agreement No 633464 ). Daniel Moreno-Fernández was funded by the Spanish Ministry of Science and Innovation through the Juan de la Cierva Formación program ( FJC2018-037870 )., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Harmonized classification of forest types in the iberian peninsula based on national forest inventories

  • Nunes, Leónia
  • Moreno, Mauro
  • Alberdi, Iciar
  • Álvarez-González, Juan Gabriel
  • Godinho-Ferreira, Paulo
  • Mazzoleni, Stefano
  • Castro Rego, Francisco
21 Pág., National Forest Inventories (NFIs) collect and provide a large amount of information regarding the forest volume, carbon stocks, vitality, biodiversity, non-wood forest products and their changes. Forest stands variables data are paramount to understanding their composition, especially on those related with understory characteristics and the coverage of species according to canopy layers; they are essential to assess biodiversity and to support forest management. At the same time, these inventories allow the development of harmonized forest descriptions beyond the national scale. This study aims to develop a homogeneous characterization of the Iberian Peninsula’s forests, in order to classify and identify the forest types. For this purpose, harmonized data from NFIs of Portugal and Spain were used to assess the composition of species, dominance and the percentage of cover for each species in a vertical space defined by seven canopy layers. Using the “K-means” clustering algorithm, a set of clusters was identified and georeferenced using forest polygons from land use and cover maps of both countries. The interpretation and description of the clusters lead to the establishment of 28 forest types that characterize all of the Iberian Peninsula forests. Each forest area has been described through one of the forest types and their relation with other ecological characteristics of the stands was analyzed. Shrubs formations are generally widely distributed in the forest area of the Iberian Peninsula, however their abundance in terms of cover is lower in comparison with tree species. Around 71% of the forest types are dominated by trees, mainly species from the genera Pinus and Quercus, and 21% are dominated by shrub formations with species of Ulex spp., Cytisus spp., and Cistus spp. The Quercus ilex s.l. L. and Pinus pinaster Aiton are the common species of importance for both NFIs. The results represent a powerful and homogenous multi-use tool describing the Iberian Peninsula’s forestlands with applications on landscape analysis, forest management and conservation. This information can be used for comparisons at larger scales, allowing cross-border analysis in relation to various aspects, such as hazards and wildfires, as well as management and conservation of forest biodiversity. The developed method is adaptable to an updated dataset from more recent NFIs and to other study areas., This research was funded from the European Union’s Horizon 2020 research and innovation programme, DIABOLO project “Distributed, integrated and harmonized forest information for bioeconomy outlooks”, EU Grant Agreement no. 633464, from the EXTREME project “Influence of VOCs (volatile organic compounds) on the extreme behavior of forest fires” (PCIF/GFC/0078/2018), Foundation for Science and Technology, and from the VIS4FIRE project (RTA 2017-0042-C05-05), Spanish Ministry of Economy,Industry, and Competitiveness., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Towards a set of national forest inventory indicators to be used for assessing the conservation status of the habitats directive forest habitat types

  • Kovac, Marko
  • Gasparini, P.
  • Notarangelo, Monica
  • Rizzo, M.
  • Cañellas, Isabel
  • Fernández-de-Uña, L.
  • Alberdi, Iciar
14 Pág., Since the enactment of the EU Habitats Directive, the conservation status of forest habitat types, habitats of species, and species has become the central concept of the Directive's nature conservation legislation. Despite its role, it has drawn relatively little attention. Within a rather short research period, a few research papers have addressed the existing definitions, indicators for the conservation status assessment, and assessment techniques. This paper attempted to complete the set of measurable indicators available in national forest inventories and connect them with the forest habitat types’ conservation status components (area, function, structure, and prospects). A set of 40 indicators was defined, labelled with one or more of the four conservation status components and assessed with the quality dimensions. The analysis uncovered that five indicators could be used to assess the component of range and area, 20 that of structure, 22 that of function and 27 that of prospects. It also showed that conventional forestry indicators such as tree species, diameter at breast height, and regeneration are less sensitive regarding the data quality. Conversely, some typical biodiversity indicators lacked completeness, timeliness, and precision. In addition to this analysis, the data distributions (data for them were provided by the national forest inventories of Italy, Slovenia, and Spain) of some indicators were analysed. Based on all the results, it was also possible to conclude that there is a shortage of national forest inventory indicators for the assessments of the area and function conservation status components. While the area component should be described with the indicators of forest habitat type fragmentation, mingling and perforation with non-forest and other forest vegetation communities, the functional component is bereft of indicators describing processes such as biomass growth and carbon cycling. Future research should thus search for more indicators to represent all conservation status components in a more balanced way. More efforts should also be expended into the harmonisation of indicators., This research was largely funded by the project DIABOLO (European Union’s Horizon 2020 research and innovation programme under grant agreement No 633464). Additional support came from the Research Programme P4 – 0107, financed by the Slovenian Research Agency (ARRS). We would like to thank Elena Robla, Roberto Vallejo, and Vicente Sandoval of the Ministry of Agriculture, Fisheries and Food for providing access to the Spanish NFI data-sets. The data for Italy were provided by the National inventory on forests and forest carbon pools INFC2005 (www.inventarioforestale.org, www.infc.it), conducted by the Carabinieri command for forest protection (former National Forest Service) and scientifically and technically supported by the CREA-Research centre for forestry and wood (former CRA-MPF). We also thank Mitja Skudnik, who prepared the Slovene 2012 Forest and forest ecosystem condition survey data. Lastly, we would like to thank the anonymous reviewers of the earlier version of the paper and Terry T. Jackson, who proofread both versions of the paper., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The conservation status assessment of Natura 2000 forest habitats in Europe: capabilities, potentials and challenges of national forest inventories data

  • Alberdi, Iciar
  • Nunes, Leónia
  • Kovac, Marko
  • Bonheme, Ingrid
  • Cañellas, Isabel
  • Castro Rego, Francisco
  • Dias, Susana
  • Duarte, Inês
  • Notarangelo, Monica
  • Rizzo, M.
  • Gasparini, P.
15 Pág., Key message: There is a need to improve the consistency of international information concerning the conservation status assessment of the species and habitat types in the Natura 2000 reports. National Forest Inventories could contribute towards a more objective and harmonised assessment although their use shows some challenges as low precision for rare or small area habitats. Recommendations for a set of 12 structural and functional indicators are provided. Context: There are differences among Member States as regards applying conservation status assessment and priorities according to the Directive on the conservation of natural habitats (Habitats Directive). Aims: This paper aims to analyse the consistency as regards forest habitat types reporting and the use and suitability of National Forest Inventories (NFIs) to assess their conservation status, as well as to provide recommendations for harmonised assessments through NFIs. Methods: A survey was carried out concerning the use of NFI data to report within the commitments of the Habitat Directive. The survey covered 13 European countries, accounting for 62% of forest habitat area. Additionally, case studies were carried out in four countries. Results: The identification of forest habitat types and the set of quantitative and/or qualitative indicators differ between countries. The use of NFI data is being considered in seven countries and it is expected to increase for the 2013–2018 reporting period. The main challenges reported of use of NFI data are related to the habitat identification and their mapping, and the monitoring frequency, design and costs (i.e. rare or small area habitats). Conclusion: It is necessary to improve the comparability of the conservation status assessments between countries., The research was funded by the project DIABOLO (European Union’s Horizon 2020 research and innovation programme under grant agreement no. 633464)., Peer reviewed
RUO. Repositorio Institucional de la Universidad de Oviedo
Publicación Artículo científico (JournalArticle)

Potential of Sentinel-2A data to model surface and canopy fuel characteristics in relation to crown fire hazard

  • Arellano Pérez, S.
  • Castedo Dorado, Fernando|||0000-0002-1656-5255
  • López Sánchez, Carlos Antonio|||0000-0002-5135-5739
  • González Ferreiro, E.
  • Yang, Z.
  • Díaz Varela, R. A.
  • Álvarez González, Juan Gabriel
  • Vega, J. A.
  • Ruiz González, A. D.
Funding was provided by projects DIABOLO (H2020 GA 633464) and GEPRIF (RTA 2014-00011-c06-04)