Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Validación de los índices de teledetección dNBR y RdNBR para determinar la severidad del fuego en el incendio forestal de Oia-O Rosal (Pontevedra) en 2013, Validation of the remote sensing indices dNBR and RdNBR to assess fire severity in the Oia-O Rosal (Pontevedra) wildfire in 2013

  • Arellano, S.
  • Vega, J.A.
  • Rodríguez y Silva, F.
  • Fernández, C.
  • Vega-Nieva, D.
  • Álvarez-González, J.G.
  • Ruiz-González, A.D.
[EN] Fire severity evaluation and mapping following wildfire is an essential task for post-fire rehabilitation activities and forest management planning. For that purpose, some spectral indexes are used to quantify the changes caused by fire, being Landsat satellite one of the most frequently used. Even though Galicia is the Spanish region with the highest number of fires in the country, the information on fire severity estimation through satellite imagery is scarce. In the present study, the capacity of dNBR (differenced Normalized Burn Ratio) and RdNBR (Relative difference Normalized Burn Ratio), through Landsat 8 imagery processing, are compared for the first time in Galicia to test both indexes with field data following the methodology from CBI (Composite Burn Index) in Oia-O Rosal (Pontevedra) wildfire occurred in the summer of 2013. The results indicate that the models for dNBR and RdNBR estimation according to CBI were similar, explaining a 69 and 73% of variability, respectively. These models allow to obtain a new fire severity thresholds for dNBR and RdNBR for the burned area. Although, both indexes showed a similar and quite high overall accuracy in the classification of the different fire severity classes (75% y 83% for dNBR and RdNBR, respectively), RdNBR was slightly more accurate than dNBR. Additionally, the dNBR-based fire severity map significantly underestimated the high fire severity area, compared with RdNBR. Those preliminary results can be useful to evaluate fire severity spatial distribution, in wildfires in Galicia although new data will be necessary before an operational tool to be available., [ES] Evaluar y cartografiar la severidad del fuego después de incendios forestales se ha convertido en una tarea esencial para abordar la rehabilitación urgente de áreas quemadas y mejorar la planificación de la gestión postincendio. Aunque en Galicia se produce el mayor número de incendios forestales en España, la información sobre la estimación de la severidad del fuego mediante índices de teledetección es escasa. En este estudio se comparan, por primera vez en esta región, las capacidades de dNBR (differenced Normalized Burn Ratio) y RdNBR (Relative difference Normalized Burn Ratio), obtenidos de imágenes Landsat 8, para el testado de dichos índices con mediciones de severidad del fuego en campo, siguiendo el protocolo de CBI (Composite Burn Index), en el incendio de Oia-O Rosal (Pontevedra) ocurrido en 2013. Los modelos desarrollados para estimar dNBR y RdNBR en función del CBI fueron similares, con un porcentaje de variabilidad explicada de un 69% y 73%, respectivamente. Estos modelos permitieron obtener unos nuevos intervalos de las clases de severidad de dNBR y RdNBR para el área incendiada. Aunque los dos índices tuvieron valores de precisión conjunta relativamente altos y semejantes (75% y 83%, respectivamente) para clasificar las áreas afectadas por diferentes niveles de severidad, RdNBR mostró una ligera ventaja sobre dNBR. Además, el mapa de severidad basado en dNBR presentó menos superficie quemada con alta severidad, en comparación con RdNBR, y lo contrario para moderada severidad. Con esta información se dispone de una primera herramienta para abordar la evaluación de las pautas espaciales de severidad en incendios de Galicia, aunque será necesario contar con nuevos datos antes de disponer de una herramienta operativa., Los autores desean expresar su agradecimiento a E. Pérez, J.R. Currás, E. Jiménez, J. Mª Fernández, J. L. Pardo, E. Puga, N. Méndez, M. Martinez, C. Eimil, M. Lopez, D. García, F. Martinez, T. Fernández, B. Domínguez, S. Castiñeiras por su colaboración. Asimismo a la Dirección Xeral de Montes de la Consellería de Medio Rural de la Xunta de Galicia y a la empresa pública SEAGA e INDITEX, por su apoyo.Este trabajo ha sido parcialmente financiado por el proyecto INIA-RTA 2011- 00065-C02-00: “Rehabilitación y restauración post-incendio: Efectos en el tiempo sobre la recuperación de la ve-getación afectada, su inflamabilidad y en la calidad del suelo” y el proyecto GEPRIF. INIA-RTA2014-00011-C06-00: “Reducción de la Severidad del Fuego Mediante Nuevas Herramientas y Tecnologías para la Gestión Integrada de la Protección contra los Incendios Forestales”, ambos con financiación del Ministerio de Economía y Competitividad y cofinanciados por FEDER.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Evaluación y cartografiado de la severidadde los grandes incendios ocurridos en eldistrito forestal XIV (Verín-Viana) entre 2006-2016, Evaluation and mapping of the severity of the maior fires that ocurred in forest district XIV (Verin-Viana) between 2006-2016

  • Alonso Rego, Cecilia
  • Ruiz González, Ana Daría
  • Arellano Pérez, Stéfano
[ESP} La evaluación y el cartografiado de la severidad del fuego y del nivel de afectación de las copas en áreas arboladas resulta esencial para proponer y priorizar acciones de rehabilitación urgentes posteriores a los incendios. El principal objetivo de este estudio es el cartografiado y la obtención de mapas de niveles de severidad en los incendios ocurridos en el distrito forestal XIV (Verín-Viana) durante el período 2006-2016. También se ha realizado una primera aproximación hacia la búsqueda de relaciones entre las clases más altas de severidad del fuego y de daño a las copas y determinadas variables topográficas, meteorológicas y de combustibles. El estudio, basado en el cálculo de los índices dNBR (differenced Normalized Burn Ratio) y RdNBR (Relative difference Normaliced Burn Ratio) a partir de imágenes Landsat, discrimina cuatro clases de severidad de fuego y cuatro niveles de daño a las copas. Las variables que más explican el porcentaje de superficie quemada de la clase de severidad más elevada y el nivel más alto de daño a las copas fueron la velocidad del viento y el porcentaje del área quemada con pendiente entre el 30 y el 45%. Se observó que el dNBR estima una mayor superficie quemada en severidad moderada y baja en comparación con el RdNBR que estima una mayor superficie quemada con alta severidad.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Estimating stand and fire-related surface and canopy fuel variables in pine stands using low-density airborne and single-scan terrestrial laser scanning data

  • Alonso Rego, Cecilia
  • Arellano Pérez, Stéfano
  • Guerra Hernández, Juan
  • Ruiz González, Ana Daría
  • Molina Valero, Juan Alberto
  • Martínez Calvo, Adela
  • Pérez Cruzado, César
  • Castedo Dorado, Fernando
  • González Ferreiro, Eduardo
  • Álvarez González, Juan Gabriel
In this study, we used data from a thinning trial conducted on 34 different sites and 102 sample plots established in pure and even-aged Pinus radiata and Pinus pinaster stands, to test the potential use of low-density airborne laser scanning (ALS) metrics and terrestrial laser scanning (TLS) metrics to provide accurate estimates of variables related to surface and canopy fires. An exhaustive field inventory was carried out in each plot to estimate the main stand variables and the main variables related to fire hazard: surface fuel loads by layers, fuel strata gap, surface fuel height, stand mean height, canopy base height, canopy fuel load and canopy bulk density. In addition, the point clouds from low-density ALS and single-scan TLS of each sample plot were used to calculate metrics related to the vertical and horizontal distribution of forest fuels. The comparative performance of the following three non-parametric machine learning techniques used to estimate the main stand- and fire-related variables from those metrics was evaluated: (i) multivariate adaptive regression splines (MARS), (ii) support vector machine (SVM), and (iii) random forest (RF). The selection of the best modeling approach was based on a comparison of the root mean square error (RMSE), obtained by optimizing the parameters of each technique and performing cross-validation. Overall, the best results were obtained with the MARS techniques for data from both sensors. The TLS data provided the best results for variables associated with the internal characteristics of canopy structure and understory fuel but were less reliable for estimating variables associated with the upper canopy, due to occlusion by mid-canopy foliage. The combination of ALS and TLS metrics improved the accuracy of estimates for all variables analyzed, except the height and the biomass of the understory shrubs. The variability demonstrated by the combined use of both types of metrics ranged from 43.11% for the biomass of duff litter layers to 94.25% for dominant height. The results suggest that the combination of machine learning techniques and metrics derived from low-density ALS data, drawn from a single-scan TLS or a combination of both metrics, may represent a promising alternative to traditional field inventories for obtaining valuable information about surface and canopy fuel variables at large scales.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Estimating Fuel Loads and Structural Characteristics of Shrub Communities by Using Terrestrial Laser Scanning

  • Alonso Rego, Cecilia
  • Arellano Pérez, Stéfano
  • Cabo, Carlos
  • Ordóñez, Celestino
  • Álvarez González, Juan Gabriel
  • Díaz Varela, Ramón Alberto
  • Ruiz González, Ana Daría
Forest fuel loads and structural characteristics strongly affect fire behavior, regulating the rate of spread, fireline intensity, and flame length. Accurate fuel characterization, including disaggregation of the fuel load by size classes, is therefore essential to obtain reliable predictions from fire behavior simulators and to support decision-making in fuel management and fire hazard prediction. A total of 55 sample plots of four of the main non-tree covered shrub communities in NW Spain were non-destructively sampled to estimate litter depth and shrub cover and height for species. Fuel loads were estimated from species-specific equations. Moreover, a single terrestrial laser scanning (TLS) scan was collected in each sample plot and features related to the vertical and horizontal distribution of the cloud points were calculated. Two alternative approaches for estimating size-disaggregated fuel loads and live/dead fractions from TLS data were compared: (i) a two-steps indirect estimation approach (IE) based on fitting three equations to estimate shrub height and cover and litter depth from TLS data and then use those estimates as inputs of the existing species-specific fuel load equations by size fractions based on these three variables; and (ii) a direct estimation approach (DE), consisting of fitting seven equations, one for each fuel fraction, to relate the fuel load estimates to TLS data. Overall, the direct approach produced more balanced goodness-of-fit statistics for the seven fractions considered jointly, suggesting that it performed better than the indirect approach, with equations explaining more than 80% of the observed variability for all species and fractions, except the litter loads
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Capítulo o parte de un libro (BookPart)

Estimación de la altura del complejo de combustible en comunidades de matorral desarbolado a partir de datos LIDAR de baja densidad

  • Arellano Pérez, Stéfano
  • Guerra Hernández, Juan
  • Botequim, Brigite
  • Alonso Rego, Cecilia
  • López Fernández, Mario
  • Álvarez González, Juan Gabriel
  • Guilherme-Borges, J.
  • Ruiz González, Ana Daría
Determinadas características estructurales de las comunidades de matorral, como la altura del complejo y la carga de combustible, afectan considerablemente al comportamiento del fuego. Por lo tanto, contar con una cartografía de estas variables, elaborada a partir de sensores remotos, puede suponer un gran avance en el uso de simuladores de comportamiento del fuego. En este estudio se pretende estimar la altura del complejo de combustible a partir de datos LiDAR de baja densidad en algunas de las comunidades de matorral desarboladas de la parte oriental de Galicia más afectadas por incendios. Para ello se llevaron a cabo inventarios no destructivos con mediciones de la altura de matorral en 17 parcelas cuadradas desbrozadas perimetralmente. El modelo de regresión lineal obtenido para estimar la altura media de matorral a partir de la métrica del percentil 99 de la distribución de altura de los retornos láser fue bueno, explicando el 88% de la variabilidad observada. Estos resultados deben considerarse como preliminares ya que sería conveniente contar con un mayor número de parcelas en los próximos vuelos LiDAR y una mayor densidad de puntos para la obtención de modelos más robustos.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Capítulo o parte de un libro (BookPart)

Mapping fire severity levels of burned areas in Galicia (NW Spain) by Landsat images and the dNBR index: Preliminary results about the influence of topographical, meteorological and fuel factors on the highest severity level

  • Arellano Pérez, Stéfano
  • Ruiz González, Ana Daría
  • Álvarez González, Juan Gabriel
  • Vega Hidalgo, José Antonio
  • Díaz Varela, Ramón Alberto
  • Alonso Rego, Cecilia
Fire severity assessment and mapping are essential for prioritizing post-fire emergency rehabilitation actions. The present study, carried out in Galicia (one of the regions most severely impacted by wildfire in the Iberian Peninsula), focused on 36 wildfires affecting areas of more than 200 ha during the period 2006- 2016. The aims of the study were i) to map the severity in these wildfires by using the differenced Normalized Burn Ratio (dNBR) index, and ii) to explore how the highest levels of fire severity and canopy damage are related to topographical, meteorological and forest fuel variables. Pre and post-fire Landsat images (Path 204 and Row 31), provided by the European Space Agency (ESA), were radiometrically and topographically corrected. The dNBR index was calculated for each wildfire, and the values obtained were used to establish four classes of fire severity and four levels of canopy damage. A total of 23 topographical, meteorological and fuel variables were also determined in order to characterize each wildfire. The non-parametric Random Forests method was used to relate the burned area (%) corresponding to the highest levels of fire severity and crown fire damage to the various environmental variables. The variables that best differentiated the most severely burned areas were in both cases wind speed and percentage of burned area with slope ranging from 30 to 45%.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Potential of Sentinel-2A data to model surface and canopy fuel characteristics in relation to crown fire hazard

  • Arellano Pérez, Stéfano
  • Castedo Dorado, Fernando
  • López Sánchez, Carlos Antonio
  • González Ferreiro, Eduardo
  • Yang, Zhiqiang
  • Díaz Varela, Ramón Alberto
  • Álvarez González, Juan Gabriel
  • Vega, José Antonio
  • Ruiz González, Ana Daría
Background: Crown fires are often intense and fast spreading and hence can have serious impacts on soil, vegetation, and wildlife habitats. Fire managers try to prevent the initiation and spread of crown fires in forested landscapes through fuel management. The minimum fuel conditions necessary to initiate and propagate crown fires are known to be strongly influenced by four stand structural variables: surface fuel load (SFL), fuel strata gap (FSG), canopy base height (CBH), and canopy bulk density (CBD). However, there is often a lack of quantitative data about these variables, especially at the landscape scale. Methods: In this study, data from 123 sample plots established in pure, even-aged, Pinus radiata and Pinus pinaster stands in northwest Spain were analyzed. In each plot, an intensive field inventory was used to characterize surface and canopy fuels load and structure, and to estimate SFL, FSG, CBH, and CBD. Equations relating these variables to Sentinel-2A (S-2A) bands and vegetation indices were obtained using two non-parametric techniques: Random Forest (RF) and Multivariate Adaptive Regression Splines (MARS). Results: According to the goodness-of-fit statistics, RF models provided the most accurate estimates, explaining more than 12%, 37%, 47%, and 31% of the observed variability in SFL, FSG, CBH, and CBD, respectively. To evaluate the performance of the four equations considered, the observed and estimated values of the four fuel variables were used separately to predict the potential type of wildfire (surface fire, passive crown fire, or active crown fire) for each plot, considering three different burning conditions (low, moderate, and extreme). The results of the confusion matrix indicated that 79.8% of the surface fires and 93.1% of the active crown fires were correctly classified; meanwhile, the highest rate of misclassification was observed for passive crown fire, with 75.6% of the samples correctly classified. Conclusions: The results highlight that the combination of medium resolution imagery and machine learning techniques may add valuable information about surface and canopy fuel variables at large scales, whereby crown fire potential and the potential type of wildfire can be classified
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Individual-Tree and Stand-Level Models for Estimating Ladder Fuel Biomass Fractions in Unpruned Pinus radiata Plantations

  • Alonso Rego, Cecilia
  • Fernandes, Paulo
  • Álvarez González, Juan Gabriel
  • Arellano Pérez, Stéfano
  • Ruiz González, Ana Daría
The mild climate and, in recent decades, the increased demand for timber have favoured the establishment of extensive plantations of fast-growing species such as Pinus radiata in Galicia (a fire-prone region in northwestern Spain). This species is characterised by very poor self-pruning; unmanaged pine stands have a worrying vertical continuity of fuels after crown closure because the dead lower branches accumulate large amounts of fine dead biomass including twigs and suspended needles. Despite the important contribution of these dead ladder fuels to the overall canopy biomass and to crown-fire hazards, equations for estimating these fuels have not yet been developed. In this study, two systems of equations for estimating dead ladder fuel according to size class and the vertical distribution in the first 6 m of the crown were fitted: a tree-level system based on individual tree and stand variables and a stand-level system based only on stand variables. The goodness-of-fit statistics for both model systems indicated that the estimates were robust and accurate. At the tree level, fuel biomass models explained between 35% and 59% of the observed variability, whereas cumulative fuel biomass models explained between 62% and 81% of the observed variability. On the other hand, at the stand level, fuel-load models explained between 88% and 98% of the observed variability, whereas cumulative fuel-load models explained more than 98% of the total observed variability. These systems will therefore allow managers to adequately quantify the dead ladder fuels in pure Pinus radiata stands and to identify the treatments required to reduce crown-fire hazard.