Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Experimental study of the evanescent-wave photonic sensors response in presence of molecular beacon conformational changes

  • Ruiz-Tórtola, Ángela
  • Prats-Quílez, Francisco
  • Gonzalez-Lucas, Daniel
  • Wheeler, Guy
  • Dalmay, Tamas
  • Bohlmann, Helge
  • Götzen, Reiner
  • Bañuls Polo, María-José|||0000-0002-2422-7731
  • Maquieira, Angel|||0000-0003-4641-4957
  • Griol Barres, Amadeu
  • Hurtado Montañés, Juan|||0000-0002-4870-7641
  • García-Rupérez, Jaime|||0000-0002-2036-0084
[EN] An experimental study of the influence of the conformational change suffered by molecular beacon (MB) probesupon the biorecognition of nucleic acid target oligonucleotides over evanescent wave photonic sensorsis reported. To this end, high sensitivity photonic sensors based on silicon photonic bandgap (PBG) structures were used, where the MB probes were immobilized via their 5 termination. Those MBs incorporate a biotin moiety close to their 3 termination in order to selectively bind a streptavidin molecule to them. The different photonic sensing responses obtained toward the target oligonucleotide detection, when the streptavidin molecule was bound to the MB probes or not, demonstrate the conformational change suffered by the MB upon hybridization, which promotes the displacement of the streptavidin molecule away from the surface of the photonic sensing structure., Horizon 2020 Framework Programme, Grant/Award Number: ICT-644242; MINECO, Grant/Award Number: CTQ/2016/75749-R
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

High performance photonic biosensors based on periodic configurations

  • García-Rupérez, Jaime|||0000-0002-2036-0084
  • Gómez-Gómez, María Isabel|||0000-0001-7548-209X
  • Ponce-Alcántara, Salvador|||0000-0002-7479-8129
  • Torrijos-Morán, Luis
  • Martinez-Perez, Paula
[EN] Periodic photonic configurations as photonic crystals (PhCs) and subwavelength grating (SWG) waveguides are gaining a renewed interest for the development of biosensing structures. By performing a proper design, these periodic configurations allow a significant sensitivity increase while keeping a compact footprint, what is achieved by exploiting concepts such as the slow-wave effect, the increase of the light-matter overlap or the interference of dispersion engineered modes., These results were achieved thanks to the funding received from the European Union (ICT-644242-SAPHELY, PHC634013-PHOCNOSIS and the operational program of the European Regional Development Fund (FEDER) of the Valencia Regional Government 2014¿2020), the Spanish Government (TEC2015-63838-C3-1-R-OPTONANOSENS and PID2019-106965RB-C21-PHOLOW), the Generalitat Valenciana (AVANTI/2019/123, ACIF/2019/009 and PPC/2020/037), the Universitat Politècnica de València (PAID-01-17, PAID-01-18 and OCUSENSOR).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Covalent attachment of biotinylated molecular beacons via thiol-ene coupling. A study on conformational changes upon hybridization and streptavidin binding

  • Gonzalez-Lucas, Daniel
  • Bañuls Polo, María-José|||0000-0002-2422-7731
  • García-Rupérez, Jaime|||0000-0002-2036-0084
  • Maquieira, Angel|||0000-0003-4641-4957
[EN] The authors describe a method for the detection of DNA by using immobilized molecular beacons (MBs) on the surface of silicon, with a view on possible application in biosensing. MB hybridization and protein recognition were interrogated on silicon-oninsulator (SOI) surfaces by using fluorescently tagged probes. In order to better understand the conformational changes that occur to MBs upon hybridization, the process was studied by using dual polarization interferometry (DPI). A model system was developed that matches thickness, mass, and density parameters. The results experimentally demonstrate that hybridization promotes the displacement of a protein away from the surface. This finding may be further exploited in techniques such as photonic sensors, thereby paving the way to the design of more sensitive biosensors based on the use of MBs., This research was funded by the European Union Horizon 2020 program (ICT-644242 SAPHELY project), the MINECO projects CTQ/2013/45875-R, and CTQ/2016/75749-R, FEDER, and GVA PROMETEO II 2014/40.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

High sensitivity and label-free oligonucleotides detection using photonic bandgap sensing structures biofunctionalized with molecular beacon probes

  • Ruiz-Tórtola, Ángela
  • Prats-Quílez, Francisco
  • Gonzalez-Lucas, Daniel
  • Wheeler, Guy
  • Dalmay, Tamas
  • Bañuls Polo, María-José|||0000-0002-2422-7731
  • Maquieira, Angel|||0000-0003-4641-4957
  • Griol Barres, Amadeu
  • Hurtado Montañés, Juan|||0000-0002-4870-7641
  • García-Rupérez, Jaime|||0000-0002-2036-0084
[EN] A label-free sensor, based on the combination of silicon photonic bandgap (PBG) structures with immobilized molecular beacon (MB) probes, is experimentally developed. Complementary target oligonucleotides are specifically recognized through hybridization with the MB probes on the surface of the sensing structure. This combination of PBG sensing structures and MB probes demonstrates an extremely high sensitivity without the need for complex PCR-based amplification or labelling methods., European Commission through the Horizon 2020 Program (ICT-644242 SAPHELY project).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Experimental study of a real-time and highly sensitive fiber-optic porous silicon temperature sensing probe

  • Caroselli, Raffaele
  • Martín-Sánchez, David
  • Prats-Quílez, Francisco
  • Torrijos-Morán, Luis
  • Ponce-Alcántara, Salvador|||0000-0002-7479-8129
  • García-Rupérez, Jaime|||0000-0002-2036-0084
[EN] We report the development of a temperature sensing probe created as a result of the combination of an optical fiber and a porous silicon microcavity (PSMC). After determining the physical parameters of the PSMC to achieve the required porous sensing structure, it was fabricated by electrochemically etching a silicon wafer. A 1-mm(2) PSMC piece was attached to the tip of an optical fiber so that temperature variations can be monitored in real-time exactly on that point. First, the performance of the PSMC sensor probe was characterized in a stable environment as water, obtaining a sensitivity around 110 pm/degrees C and a resolution in the 10-4 degrees C range. Afterward, the temperature transmission dynamics in air environment were studied., This work was supported by the European Commission under Project H2020-644242 SAPHELY, in part by the Spanish Government under Project TEC2013-49987-EXP BIOGATE and Project TEC2015-63838-C3-1-R OPTONANOSENS, and in part by the Generalitat Valenciana under the Doctoral Scholarship under Grant GRISOLIAP/2014/109.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Improved Performance of DNA Microarray Multiplex Hybridization Using Probes Anchored at Several Points by Thiol-Ene or Thiol-Yne Coupling Chemistry

  • Bañuls Polo, María-José|||0000-0002-2422-7731
  • Puchades, Rosa|||0000-0002-9329-1593
  • Maquieira, Angel|||0000-0003-4641-4957
  • Jimenez-Meneses, P.
  • Meyer, A.
  • Vasseur, J.J.
  • Morvan, F.
  • Escorihuela Fuentes, Jorge
[EN] Nucleic acid microarray-based assay technology has shown lacks in reproducibility, reliability, and analytical sensitivity. Here, a new strategy of probe attachment modes for silicon-based materials is built up. Thus, hybridization ability is enhanced by combining thiol-ene or thiol-yne click chemistry reactions with a multipoint attachment of polythiolated probes. The viability and performance of this approach was demonstrated by specifically determining Salmonella PCR products up to a 20 pM sensitivity level., The authors thank Dr. Elena Pinilla for her helpful discussion about AFM results. This work was funded by EU’s program Horizon 2020 ICT-26-2014-644242, Spanish Ministry MINECO CTQ/2013/45875-R FEDER, and local administration GVA PROMETEO II 2014/40. The authors acknowledge Luis Tortajada-Genaro and Regina Niñoles Rodenes for kindly providing the Salmonella and Campylobacter PCR products. F.M. is member of Inserm.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Real-Time and In-Flow Sensing Using a High Sensitivity Porous Silicon Microcavity-Based Sensor

  • Caroselli, Raffaele
  • Martín-Sánchez, David
  • Prats-Quílez, Francisco
  • Torrijos-Morán, Luis
  • Ponce-Alcántara, Salvador|||0000-0002-7479-8129
  • García-Rupérez, Jaime|||0000-0002-2036-0084
[EN] Porous silicon seems to be an appropriate material platform for the development of high-sensitivity and low-cost optical sensors, as their porous nature increases the interaction with the target substances, and their fabrication process is very simple and inexpensive. In this paper, we present the experimental development of a porous silicon microcavity sensor and its use for real-time in-flow sensing application. A high-sensitivity configuration was designed and then fabricated, by electrochemically etching a silicon wafer. Refractive index sensing experiments were realized by flowing several dilutions with decreasing refractive indices, and measuring the spectral shift in real-time. The porous silicon microcavity sensor showed a very linear response over a wide refractive index range, with a sensitivity around 1000 nm/refractive index unit (RIU), which allowed us to directly detect refractive index variations in the 10(-7) RIU range., Funding from Spanish government through grants TEC2015-63838-C3-1-R (MINECO/FEDER, UE) and TEC2013-49987-EXP BIOGATE, from the European Commission through the project H2020-644242 SAPHELY is acknowledged. Raffaele Caroselli also acknowledges the Generalitat Valenciana for funding his grant through the Doctoral Scholarship GRISOLIAP/2014/109.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Experimental study of the sensitivity of a porous silicon ring resonator sensor using continuous in-flow measurements

  • Caroselli, Raffaele
  • Prats-Quílez, Francisco
  • Martín-Sánchez, David
  • Torrijos-Morán, Luis
  • Bandarenka, Hanna
  • Girel, Kseniya
  • Bondarenko, Vitaly
  • Ponce-Alcántara, Salvador|||0000-0002-7479-8129
  • Griol Barres, Amadeu
  • Bellieres, Laurent Christophe
  • García-Rupérez, Jaime|||0000-0002-2036-0084
[EN] A highly sensitive photonic sensor based on a porous silicon ring resonator was developed and experimentally characterized. The photonic sensing structure was fabricated by exploiting a porous silicon double layer, where the top layer of a low porosity was used to form photonic elements by e-beam lithography and the bottom layer of a high porosity was used to confine light in the vertical direction. The sensing performance of the ring resonator sensor based on porous silicon was compared for the different resonances within the analyzed wavelength range both for transverse-electric and transverse-magnetic polarizations. We determined that a sensitivity up to 439 nm/RIU for low refractive index changes can be achieved depending on the optical field distribution given by each resonance/polarization. (C) 2017 Optical Society of America under the terms of the OSA Open Access Publishing Agreement, European Commission through the project H2020-644242 SAPHELY; Spanish government through the projects TEC2013-49987-EXP BIOGATE and TEC2015-63838-C3-1-R-OPTONANOSENS; Generalitat Valenciana through the Doctoral Scholarship GRISOLIAP/2014/109.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Thiol-click photochemistry for surface functionalization applied to optical biosensing

  • Bañuls Polo, María-José|||0000-0002-2422-7731
  • González Martínez, Miguel Ángel|||0000-0002-5104-1262
  • García-Rupérez, Jaime|||0000-0002-2036-0084
  • Maquieira, Angel|||0000-0003-4641-4957
  • Sabek, Jad
[EN] In the field of biosensing, suitable procedures for efficient probes immobilization are of outmost importance. Here we present different light-based strategies to promote the covalent attachment of thiolated capture probes (oligonucleotides and proteins) on different materials and working formats. One strategy employs epoxylated surfaces and uses the light to accomplish the ring opening by a thiol moiety present in a probe. However, most of this work lies on the use of thiol-ene photocoupling chemistry to covalently attach probes to the supports. And thus, both alkenyl and thiol derivatized surfaces are assayed to immobilize thiol or alkene ended probes, respectively, and their performances are compared. Also, the effect of the number of thiols carried by the probe is analyzed comparing single-point and multi-point attachment. The performance of the analogous tethering, but onto alkynylated surfaces is also carried out, and the sensing response is related to the surfaces hydrophobicity. A newly developed reaction is also discussed where a fluorinated surface undergoes the covalent immobilization of thiolated probes activated by light, creating small hydrophilic areas where the probes are attached, and leaving the rest of the surface highly hydrophobic and repellent against protein unspecific adsorption. These mixed surfaces confine the sample (aqueous) uniquely on the hydrophilic spots lowering the background signal and thus increasing the sensitivity. These probe immobilization approaches are applied to fluorescence microarray and label-free nanophotonic biosensing. All the exposed reactions have in common the photoactivation of the thiol moieties, and give rise to quick, clean, versatile, orthogonal and biocompatible reactions. Water is the only solvent used, and light the only catalyzer applied. Thus, all of them can be considered as having the attributes of click-chemistry reactions. For these reasons we named them as thiol-click photochemistry, being a very interesting pool of possibilities when building a biosensor., This work was supported by the European Union program Horizon 2020, projects H2020-PHC-634013 and H2020-ICT-644242, and by the Spanish Ministry of Economy and Competitiveness, project CTQ2016-75749-R. Authors thank the whole "Signal and Measurement" research group, from the IDM, UPV, for sharing space, research and life. Special thanks to Pilar Jimenez-Meneses, Rafael Alonso, Daniel Gonzalez-Lucas, Pilar Aragon and Patricia Noguera for their contribution to the development of thiol photoattaching chemistry and surface wettability modulation.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Experimental Study of the Oriented Immobilization of Antibodies on Photonic Sensing Structures by Using Protein A as an Intermediate Layer

  • Caroselli, Raffaele
  • Garcia Castello, Javier
  • Escorihuela Fuentes, Jorge
  • Bañuls Polo, María-José|||0000-0002-2422-7731
  • Maquieira, Angel|||0000-0003-4641-4957
  • García-Rupérez, Jaime|||0000-0002-2036-0084
[EN] A proper antibody immobilization on a biosensor is a crucial step in order to obtain a high sensitivity to be able to detect low target analyte concentrations. In this paper, we present an experimental study of the immobilization process of antibodies as bioreceptors on a photonic ring resonator sensor. A protein A intermediate layer was created on the sensor surface in order to obtain an oriented immobilization of the antibodies, which enhances the interaction with the target antigens to be detected. The anti-bovine serum albumin (antiBSA)-bovine serum albumin (BSA) pair was used as a model for our study. An opto-fluidic setup was developed in order to flow the different reagents and, simultaneously, to monitor in real-time the spectral response of the photonic sensing structure. The antiBSA immobilization and the BSA detection, their repeatability, and specificity were studied in different conditions of the sensor surface. Finally, an experimental limit of detection for BSA recognition of only 1 ng/mL was obtained, Funding from Spanish government through grants TEC2015-63838-C3-1-R (MINECO/FEDER, UE), TEC2013-49987-EXP BIOGATE, and CTQ/2016/75749-R, and from the European Commission through project H2020-644242-SAPHELY is acknowledged. Raffaele Caroselli also acknowledges the Generalitat Valenciana for funding his grant through the doctoral scholarship GRISOLIAP/2014/109.