Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 12
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Thiol ene click chemistry towards easy microarraying of half-antibodies

  • Alonso Ruiz, Rafael
  • Jimenez-Meneses, P.
  • García-Rupérez, Jaime|||0000-0002-2036-0084
  • Bañuls Polo, María-José|||0000-0002-2422-7731
  • Maquieira, Angel|||0000-0003-4641-4957
[EN] A UV light-induced thiol-ene coupling reaction (TEC) between half-antibodies (hIgG) and vinyl functionalized glass surfaces was run for biosensing in the microarray format. The accomplished performance improved that obtained with whole antibodies., The authors acknowledge the funding from the European Commission through the project H2020-634013-PHOCNOSIS. This work was also partly supported by MINECO CTQ/2013/45875-R, CTQ/2016/75749-R, FEDER, and GVA PROMETEO II 2014/40.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Experimental study of subwavelength grating bimodal waveguides as ultrasensitive interferometric sensors

  • Torrijos-Morán, Luis
  • Griol Barres, Amadeu
  • García-Rupérez, Jaime|||0000-0002-2036-0084
[EN] Over the recent years, subwavelength grating (SWG) structures have increasingly attracted attention in the area of evanescent-field photonic sensors. In this Letter, for the first time to the best of our knowledge, we demonstrate experimentally the real-time refractive index (RI) sensing using the SWG bimodal interferometric structures. Two different configurations are considered to compare the effect of the nonlinear phase shift, obtained between the two first transverse electromagnetic propagating modes, in the measured bulk sensitivity. Very high experimental values up to 2270 nm/RIU are reached, which perfectly match the numerical simulations and significantly enhance other existing SWG and spectralbased sensors. By measuring the spectral shift, the obtained experimental sensitivity does not depend on the sensor length. As a result, a highly sensitive and compact singlechannel interferometer is experimentally validated for refractive index sensing, thus opening new paths in the field of optical integrated sensors., European Commission (PHC-634013 PHOCNOSIS project); Spanish Government (TEC2015-63838-C3-1-R-OPTONANOSENS project); Universitat Politecnica de Valencia (grant PAID 01-18).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Subwavelength grating bimodal waveguide for refractive index sensing

  • Torrijos-Morán, Luis
  • García-Rupérez, Jaime|||0000-0002-2036-0084
[EN] Periodic subwavelength structures supporting two TE modes are presented as high performance sensors with bulk and surface sensitivities of 1375.5nm/RIU and 6.138nm/nm, respectively. A complete theoretical study is provided by numerical expressions and FDTD simulations.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

High performance photonic biosensors based on periodic configurations

  • García-Rupérez, Jaime|||0000-0002-2036-0084
  • Gómez-Gómez, María Isabel|||0000-0001-7548-209X
  • Ponce-Alcántara, Salvador|||0000-0002-7479-8129
  • Torrijos-Morán, Luis
  • Martinez-Perez, Paula
[EN] Periodic photonic configurations as photonic crystals (PhCs) and subwavelength grating (SWG) waveguides are gaining a renewed interest for the development of biosensing structures. By performing a proper design, these periodic configurations allow a significant sensitivity increase while keeping a compact footprint, what is achieved by exploiting concepts such as the slow-wave effect, the increase of the light-matter overlap or the interference of dispersion engineered modes., These results were achieved thanks to the funding received from the European Union (ICT-644242-SAPHELY, PHC634013-PHOCNOSIS and the operational program of the European Regional Development Fund (FEDER) of the Valencia Regional Government 2014¿2020), the Spanish Government (TEC2015-63838-C3-1-R-OPTONANOSENS and PID2019-106965RB-C21-PHOLOW), the Generalitat Valenciana (AVANTI/2019/123, ACIF/2019/009 and PPC/2020/037), the Universitat Politècnica de València (PAID-01-17, PAID-01-18 and OCUSENSOR).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Vías de inmovilización de biomoléculas sobre SU-8 y otras superficies poliméricas para su utilización en biosensado óptico sin marcaje

  • Díaz Betancor, Zeneida
[ES] La presente tesis "Vías de inmovilización de biomoléculas sobre SU-8 y otras superficies poliméricas para su utilización en biosensado óptico sin marcaje" tiene como objetivo el diseño, desarrollo y evaluación de diferentes métodos de anclaje de biorreceptores en distintos materiales, en formato de micromatriz, con aplicación en biosensado. En la actualidad sigue siendo un área de creciente interés desarrollar nuevos sistemas de análisis para la detección de analitos, más sensibles y selectivos, con tiempos de análisis reducidos, miniaturizables y automatizables. Estos desarrollos pueden aplicarse en dispositivos biosensores que encuentran su aplicación en campos tan diversos como diagnóstico clínico, medicina forense y medio ambiente. Con el objetivo de desarrollar biosensores con prestaciones mejoradas se estudiaron estrategias de inmovilización de sondas sobre el soporte de ensayo basadas en el empleo de hidrogeles. En una primera fase, los desarrollos se realizaron usando tecnología de micromatrices de fluorescencia, que permite utilizar una menor cantidad de muestra y analizar múltiples analitos y muestras a la vez, reduciendo el tiempo de análisis y el coste Posteriormente, los desarrollos ya optimizados se emplearon para la puesta a punto de un biosensor óptico sin marcaje de tipo BICELL (Biophotonic Sensing Cells) en colaboración con la UPM (Universidad Politecnica de Madrid), que se aplicaron a sistemas modelo y a problemas reales. Asimismo, y en colaboración con el Centro de Tecnología Nanofotónica de la UPV, se implementó la estrategia de inmovilización a través del uso de hidrogeles, en biosensores ópticos sin marcaje constituidos por guías de ondas corrugadas. En este caso, además de la inmovilización a través de hidrogeles, se estudió un método de inmovilización covalente de fragmentos de anticuerpos que permitió su fijación orientada y muy próxima a la superficie del sensor. La tesis se estructura en seis capítulos. En el Capítulo 1 se da una visión general del concepto de biosensado, atendiendo a las distintas clasificaciones y los diferentes aspectos que hay que considerar en su diseño. En el Capítulo 2 se plantean los objetivos generales y particulares de la tesis. El Capítulo 3 plantea la aplicación de dos hidrogeles fotoinducidos derivados de fosforicolina y dextrano para mejorar la inmovilización de biomoléculas en formato micromatriz, sobre superficies planas y usando el formato de micromatriz de fluorescencia para realizar ensayos de detección con proteínas y oligonucleótidos. La polimerización del gel y el anclaje de las sondas se lleva a cabo simultáneamente mediante la utilización de reacciones fotoinducidas empleando la química click de acoplamiento tiol-eno. En el Capítulo 4 se implementa el método desarrollado en micromatriz con uno de los hidrogeles en dos tipos de biosensores interferométricos sin marcaje fabricados en SU-8. Con ambos sensores se detecta CRP en suero con muy buena sensibilidad (, LOD de 21 pg/mL). Por otro lado, esta estrategia se ensaya también en sensores nanofotónicos basados en guías de ondas corrugadas con resultados prometedores. En este capítulo también se pone a punto y se evalúa en tiempo real la inmovilización de fragmentos de anticuerpo sobre la superficie del sensor nanofotónico, mediante la reacción de acoplamiento tiol-eno inducida por luz UV. La monitorización en tiempo real permite demostrar el papel indispensable de la luz en el proceso de inmovilización. Utilizando esta aproximación se ensaya la detección sin marcaje de tres biomarcadores cardíacos de interés (CRP, cTnI/T y Mioglobina). El quinto capítulo se dedica a la descripción detallada de todos los procedimientos experimentales que se llevan a cabo en los Capítulos 3 y 4. Finalmente, el Capítulo 6 recoge las conclusiones alcanzadas a partir de los resultados obtenidos en el desarrollo de la tesis doctoral., [EN] This thesis "Biomolecule immobilization approaches on SU-8 and other polymer surfaces for label-free optical biosensing" aims to design, develop and evaluate different methods for anchoring bioreceptors in different materials, in a microarray format, with application in biosensing. Currently, it is still an area of growing interest to develop new analysis systems for the detection of biomolecules, being more sensitive and selective, with reduced analysis time, miniaturizable and automatable. These developments can be applied in biosensing devices that find utility in fields as diverse as clinical diagnosis, forensic medicine and environmental monitoring. To develop biosensors with improved performance, here strategies for immobilization of probes on the test support based on the use of hydrogels were studied. In a first phase, the developments were carried out using microarray technology, which uses lower amount of sample and can analyze multiple targets and samples at the same time, reducing tests time and cost. Subsequently, the optimized developments were used to develop, in collaboration with UPM (Polytechnic University of Madrid), a label-free optical biosensor based onBICELLs (Biophotonic Sensing Cells), which were applied to model systems and real samples. Likewise, and in collaboration with the Nanophotonic Technology Center at UPV, the hydrogel-based immobilization strategy was implemented in other label-free nanophotonic biosensors consisting of corrugated waveguides. In this case, in addition to immobilization through hydrogels, we studied a method of covalent immobilization of antibody fragments that allowed them to be oriented and very close to the sensor surface. Thus the thesis is organized into six chapters. Chapter 1 gives an overview of the concept of biosensing, and takes into account the different classifications and different items that must be considered in its design. Chapter 2 sets out the general and particular objectives of the thesis. Chapter 3 discusses the application of two photoinduced hydrogels, derived from phosphoricoline and dextran, respectively, to improve the immobilization of biomolecules in microarray format, on planar surfaces and using the fluorescence microarray format to perform detection assays with proteins and oligonucleotides. The polymerization of the gel and the anchoring of the probes are carried out using photoinduced reactions using the thiol-ene coupling click chemistry, and derivatives, performing both steps simultaneously. In Chapter 4 the method developed with one of the hydrogels in microarray format is transferred to two types of SU-8 based interferometric label-free biosensors. Both biosensors detected CRP in blood serum with very good sensitivity (LOD de 21 pg/mL). Besides, this strategy is also tested on nanophotonic sensors based on corrugated waveguides with promising results. In this chapter, immobilization of antibody fragments on the surface of the nanophotonic sensor is also performed and assessed in real time by the UV light-induced thiol-ene coupling reaction. Real-time monitoring shows the essential role of light in the immobilization process. Using this approach, the label-free detection of three cardiac biomarkers of interest (CRP, cTnI / T and Myoglobin) is tested. The fifth chapter is devoted to the detailed description of all the experimental procedures that are carried out in chapters 3 and 4. Finally, Chapter 6 collects the conclusions reached from the results obtained in the development of the doctoral thesis., [CA] La present tesi "Vies d'immobilització de biomolècules sobre SU-8 i altres superfícies polimèriques per a la seva utilització en biosensado òptic sense marcatge" té com a objectiu el disseny, desenvolupament i avaluació de diferents mètodes d'ancoratge de bioreceptors en diferents materials, en format de micromatriu , amb aplicació en biosensat. En l'actualitat segueix sent una àrea de creixent interès desenvolupar nous sistemes d'anàlisi per a la detecció de biomolècules, que siguen més sensibles i selectius, amb temps d'anàlisi reduïts, miniaturizables i automatitzables. Aquests desenvolupaments poden aplicar-se en dispositius biosensors que troben la seva utilitat en camps tan diversos com diagnòstic clínic, medicina forense i medi ambient. Amb l'objectiu de desenvolupar biosensors amb prestacions millorades es van estudiar estratègies d'immobilització de sondes sobre el suport d'assaig basades en l'ús de hidrogels. En una primera fase, els desenvolupaments es van realitzar usant tecnologia de micromatrius, que permet utilitzar una menor quantitat de mostra i analitzar múltiples dianes i mostres alhora, reduint el temps d'anàlisi i el cost Posteriorment, els desenvolupaments ja optimitzats es van emprar per a la posada a punt d'un biosensor òptic sense marcatge de tipus BICELL (Biophotonic Sensing Cells) en col·laboració amb la UPM (Universitat Politècnica de Madrid), que es van aplicar a sistemes model i als problemes reals. Així mateix, i en col·laboració amb el Centre de Tecnologia Nanofotònica de la UPV, es va implementar l'estratègia d'immobilització a través de l'ús de hidrogels, en biosensors òptics sense marcatge constituïts per guies d'ones corrugades. En aquest cas, a més de la immobilització mitjançant hidrogels es va estudiar un mètode d'immobilització covalent de fragments d'anticossos que va permetre la seva unió orientada i molt propera a la superfície del sensor. Així donç, la tesi s'estructura en sis capítols. En el capítol 1 es dóna una visió general delconcepte de biosensat, atenent les diferents classificacions i els diferents aspectes que cal considerar en el seu disseny. En el capítol 2 es plantegen els objectius generals i particulars de la tesi. El Capítol 3 planteja l'aplicació de dos hidrogels fotoinduïts derivats de fosforicolina i dextrà respectivament per millorar la immobilització de biomolècules en format micromatriu, sobre superfícies planes i usant el format de micromatriu de fluorescència per a realitzar assajos de detecció amb proteïnes i oligonucleòtids. La polimerització dell gel i l'ancoratge de les sondes es porta a terme simultàniament mitjançant la utilització de reaccions fotoinducides emprant la química click d'acoblament tiol-eno, i derivades. En el capítol 4 s'implementa el mètode desenvolupat en micromatriu amb un dels hidrogels en dos tipus de biosensors interferométricos sense marcatge basats en SU-8. Amb tots dos sensors es detecta CRP en sèrum sanguini amb molt bona sensibilitat (LOD de 21 pg/mL). D'altra banda, aquesta estratègia s'assaja també en sensors nanofotònics basats en guies d'ones corrugades amb resultats prometedors. En aquest capítol també es posa a punt i s'avalua en temps real la immobilització de fragments d'anticòs sobre la superfície del sensor nanofotònic, mitjançant la reacció d'acoblament tiol-eno induïda per llum UV. El monitoratge en temps real permet demostrar el paper indispensable de la llum en el procés d'immobilització. Utilitzant aquesta aproximació s'assaja la detecció sense marcatge de tres biomarcadors cardíacs d'interès (CRP, cTnI / T i Mioglobina). El cinquè capítol es dedica a la descripció detallada de tots els procediments experimentals que es duen a terme en els capítols 3 i 4. Finalment, el Capítol 6 recull les conclusions assolides a partir dels resultats obtinguts en el desenvolupament de la tesi doctoral., Agradecer a la financiación de esta investigación por Garantía Juvenil, FEDER y los proyectos del MINECO CTQ / 2016/75749‐R y TEC / 2017/84846‐R. Además, fue apoyado por el Programa Horizonte 2020 de la Unión Europea en el marco del proyecto H2020‐PHC‐634013 (PHOCNOSIS).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Single-channel bimodal interferometric sensor using subwavelength structures

  • Torrijos-Morán, Luis
  • García-Rupérez, Jaime|||0000-0002-2036-0084
[EN] A novel configuration of photonic sensors based on a single-channel bimodal interferometer is proposed. The design consists of a subwavelength grating (SWG) periodic structure supporting two dispersive TE-like modes that interfere at the output to create fringes in the transmission spectrum. Dispersion relations of the bimodal periodic structures have been computed in order to study the sensing performance, obtaining a theoretical bulk sensitivity of ~1300nm/RIU and a surface sensitivity of ~6.1nm/nm. Finite-Difference Time Domain (FDTD) analysis has been also carried out in order to confirm the previously obtained sensitivity results, thus showing a perfect agreement between theoretical modelling and simulation., European Commission through the Horizon 2020 Programme (PHC-634013 PHOCNOSIS project).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Real Time Monitoring of a UV Light-Assisted Biofunctionalization Protocol Using a Nanophotonic Biosensor

  • Sabek, Jad
  • Torrijos-Morán, Luis
  • Díaz-Betancor, Zeneida
  • Griol Barres, Amadeu
  • Bañuls Polo, María-José|||0000-0002-2422-7731
  • Maquieira, Angel|||0000-0003-4641-4957
  • García-Rupérez, Jaime|||0000-0002-2036-0084
[EN] A protocol for the covalent biofunctionalization of silicon-based biosensors using a UV light-induced thiol-ene coupling (TEC) reaction has been developed. This biofunctionalization approach has been used to immobilize half antibodies (hIgG), which have been obtained by means of a tris(2-carboxyethyl)phosphine (TCEP) reduction at the hinge region, to the surface of a vinyl-activated silicon-on-insulator (SOI) nanophotonic sensing chip. The response of the sensing structures within the nanophotonic chip was monitored in real time during the biofunctionalization process, which has allowed us to confirm that the bioconjugation of the thiol-terminated bioreceptors onto the vinyl-activated sensing surface is only initiated upon UV light photocatalysis., This work was supported by the Horizon 2020 Programme of the European Union under the project H2020-PHC-634013 (PHOCNOSIS).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Experimental study of an evanescent-field biosensor based on 1D photonic bandgap structures

  • Sabek, Jad
  • Torrijos-Morán, Luis
  • Díaz-Betancor, Zeneida
  • Díaz-Fernández, Francisco J.|||0000-0002-4247-2589
  • Maquieira, Angel|||0000-0003-4641-4957
  • Bañuls Polo, María-José|||0000-0002-2422-7731
  • Pinilla-Cienfuegos, Elena|||0000-0002-3734-0821
  • García-Rupérez, Jaime|||0000-0002-2036-0084
[EN] A photonic bandgap (PBG) biosensor has been developed for the label-free detection of proteins. As the sensing in this type of structures is governed by the interaction between the evanescent field going into the cladding and the target analytes, scanning near-field optical microscopy has been used to characterize the profile of that evanescent field. The study confirms the strong exponential decrease of the signal as it goes into the cladding. This means that biorecognition events must occur as close to the PBG structure surface as possible in order to obtain the maximum sensing response. Within this context, the PBG biosensor has been biofunctionalized with half-antibodies specific to bovine serum albumin (BSA) using a UV-induced immobilization procedure. The use of half-antibodies allows one to reduce the thickness of the biorecognition volume down to ca. 2.5 nm, thus leading to a higher interaction with the evanescent field, as well as a proper orientation of their binding sites towards the target sample. Then, the biofunctionalized PBG biosensor has been used to perform a direct and real-time detection of the target BSA antigen., This research was funded by the European Commission through the Horizon 2020 Programme (PHC-634013-PHOCNOSIS project) and by the Spanish Ministry of Economy and Competitiveness (TEC2015-63838-C3-1-R-OPTONANOSENS project and FJCI-2015-27228 grant).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Live Tracking Biofunctionalization and Label-Free Protein Detection Performed by a Nanophotonic Biosensor

  • Sabek, Jad
  • Torrijos-Morán, Luis
  • Díaz-Betancor, Zeneida
  • Bañuls Polo, María-José|||0000-0002-2422-7731
  • Maquieira, Angel|||0000-0003-4641-4957
  • García-Rupérez, Jaime|||0000-0002-2036-0084
[EN] A label-free biosensor based on silicon-on-insulator (SOI) photonic bandgap (PBG) structures is performed for specific protein detection. First, the SOI sensing surface is functionalized using triethoxyvinylsilane (TEVS) organosilane. Then, a UV light photocatalyzed immobilization of polyclonal half anti-bovine serum albumin (haBSA) antibodies is performed. Finally, a direct detection of target BSA antigen is carried out. Both the immobilization and the detection steps are monitored by making a continuous tracking of the PBG edge shift. In order to confirm the recognition of the antigen by the immobilized antibody, a fluorophore-labelled secondary antibody was flowed at the end of the experiment in order to perform a confirmation fluorescence test after the photonic detection., This work was supported by Horizon 2020 Framework Program of the European Union under the project H2020-PHC-634013 (PHOCNOSIS).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Photonic Applications Based on Bimodal Interferometry in Periodic Integrated Waveguides

  • Torrijos Morán, Luis
[ES] La fotónica de silicio es una tecnología emergente clave en redes de comunicación e interconexiones de centros de datos de nueva generación, entre otros. Su éxito se basa en la utilización de plataformas compatibles con la tecnología CMOS para la integración de circuitos ópticos en dispositivos pequeños para una producción a gran escala a bajo coste. Dentro de este campo, los interferómetros integrados juegan un papel crucial en el desarrollo de diversas aplicaciones fotónicas en un chip como sensores biológicos, moduladores electro-ópticos, conmutadores totalmente ópticos, circuitos programables o sistemas LiDAR, entre otros. Sin embargo, es bien sabido que la interferometría óptica suele requerir caminos de interacción muy largos, lo que dificulta su integración en espacios muy compactos. Para mitigar algunas de estas limitaciones de tamaño, surgieron varios enfoques, incluyendo materiales sofisticados o estructuras más complejas, que, en principio, redujeron el área de diseño pero a expensas de aumentar los pasos del proceso de fabricación y el coste. Esta tesis tiene como objetivo proporcionar soluciones generales al problema de tamaño típico de los interferómetros ópticos integrados, con el fin de permitir la integración densa de dispositivos basados en silicio. Para ello, aunamos los beneficios tanto de las guías de onda bimodales como de las estructuras periódicas, en términos de la mejora del rendimiento y la posibilidad para diseñar interferómetros monocanal en áreas muy reducidas. Más específicamente, investigamos los efectos dispersivos que aparecen en estructuras menores a la longitud de onda y en las de cristal fotónico, para su implementación en diferentes configuraciones interferométricas bimodales. Además, demostramos varias aplicaciones potenciales como sensores, moduladores y conmutadores en tamaños ultra compactos de unas pocas micras cuadradas. En general, esta tesis propone un nuevo concepto de interferómetro integrado que aborda los requisitos de tamaño de la fotónica actual y abre nuevas vías para futuros dispositivos basados en funcionamiento bimodal., [CA] La fotònica de silici és una tecnologia emergent clau en xarxes de comunicació i interconnexions de centres de dades de nova generació, entre altres. El seu èxit es basa en la utilització de plataformes compatibles amb la tecnologia CMOS per a la integració de circuits òptics en dispositius diminuts per a una producció a gran escala a baix cost. Dins d'aquest camp, els interferòmetres integrats juguen un paper crucial en el desenvolupament de diverses aplicacions fotòniques en un xip com a sensors biològics, moduladors electro-òptics, commutadors totalment òptics, circuits programables o sistemes LiDAR, entre altres. No obstant això, és ben sabut que la interferometría òptica sol requerir camins d'interacció molt llargs, la qual cosa dificulta la seua integració en espais molt compactes. Per a mitigar algunes d'aquestes limitacions de grandària, van sorgir diversos enfocaments, incloent materials sofisticats o estructures més complexes, que, en principi, van reduir l'àrea de disseny però a costa d'augmentar els processos de fabricació i el cost. Aquesta tesi té com a objectiu proporcionar solucions generals al problema de grandària típica dels interferòmetres òptics integrats, amb la finalitat de permetre la integració densa de dispositius basats en silici. Per a això, combinem els beneficis tant de les guies d'ones bimodals com de les estructures periòdiques, en termes de funcionament d'alt rendiment per a dissenyar interferòmetres monocanal compactes en àrees molt reduïdes. Més específicament, investiguem els efectes dispersius que apareixen en estructures menors a la longitud d'ona i en les de cristall fotònic, per a la seua implementació en diferents configuracions interferomètriques bimodals. A més, vam demostrar diverses aplicacions potencials com a sensors, moduladors i commutadors en grandàries ultres compactes d'unes poques micres cuadrades. En general, aquesta tesi proposa un nou concepte d'interferòmetre integrat que aborda els requisits de grandària de la fotònica actual i obri noves vies per a futurs dispositius basats en funcionament bimodal., [EN] Silicon photonics is a key emerging technology in next-generation communication networks and data centers interconnects, among others. Its success relies on the ability of using CMOS-compatible platforms for the integration of optical circuits into small devices for a large-scale production at low-cost. Within this field, integrated interferometers play a crucial role in the development of several on-chip photonic applications such as biological sensors, electro-optic modulators, all-optical switches, programmable circuits or LiDAR systems, among others. However, it is well known that optical interferometry usually requires very long interaction paths, which hinders its integration in highly compact footprints. To mitigate some of these size limitations, several approaches emerged including sophisticated materials or more complex structures, which, in principle, reduced the design area but at the expense of increasing fabrication process steps and cost. This thesis aims at providing general solutions to the long-standing size problem typical of optical integrated interferometers, in order to enable the densely integration of silicon-based devices. To this end, we combine the benefits from both bimodal waveguides and periodic structures, in terms of high-performance operation and compactness to design single-channel interferometers in very reduced areas. More specifically, we investigate the dispersive effects that arise from subwavelength grating and photonic crystal structures for their implementation in different bimodal interferometric configurations. Furthermore, we demonstrate various potential applications such as sensors, modulators and switches in ultra-compact footprints of a few square microns. In general, this thesis proposes a new concept of integrated interferometer that addresses the size requirements of current photonics and open up new avenues for future bimodal-operation-based devices., Financial support is also gratefully acknowledged through postdoctoral FPI grants from Universitat Politècnica de València (PAID-01-18). European Commission through the Horizon 2020 Programme (PHC-634013 PHOCNOSIS project). The authors acknowledge funding from the Generalitat Valenciana through the AVANTI/2019/123, ACIF/2019/009 and PPC/2020/037 grants and from the European Union through the operational program of the European Regional Development Fund (FEDER) of the Valencia Regional Government 2014–2020.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Thiol-click photochemistry for surface functionalization applied to optical biosensing

  • Bañuls Polo, María-José|||0000-0002-2422-7731
  • González Martínez, Miguel Ángel|||0000-0002-5104-1262
  • García-Rupérez, Jaime|||0000-0002-2036-0084
  • Maquieira, Angel|||0000-0003-4641-4957
  • Sabek, Jad
[EN] In the field of biosensing, suitable procedures for efficient probes immobilization are of outmost importance. Here we present different light-based strategies to promote the covalent attachment of thiolated capture probes (oligonucleotides and proteins) on different materials and working formats. One strategy employs epoxylated surfaces and uses the light to accomplish the ring opening by a thiol moiety present in a probe. However, most of this work lies on the use of thiol-ene photocoupling chemistry to covalently attach probes to the supports. And thus, both alkenyl and thiol derivatized surfaces are assayed to immobilize thiol or alkene ended probes, respectively, and their performances are compared. Also, the effect of the number of thiols carried by the probe is analyzed comparing single-point and multi-point attachment. The performance of the analogous tethering, but onto alkynylated surfaces is also carried out, and the sensing response is related to the surfaces hydrophobicity. A newly developed reaction is also discussed where a fluorinated surface undergoes the covalent immobilization of thiolated probes activated by light, creating small hydrophilic areas where the probes are attached, and leaving the rest of the surface highly hydrophobic and repellent against protein unspecific adsorption. These mixed surfaces confine the sample (aqueous) uniquely on the hydrophilic spots lowering the background signal and thus increasing the sensitivity. These probe immobilization approaches are applied to fluorescence microarray and label-free nanophotonic biosensing. All the exposed reactions have in common the photoactivation of the thiol moieties, and give rise to quick, clean, versatile, orthogonal and biocompatible reactions. Water is the only solvent used, and light the only catalyzer applied. Thus, all of them can be considered as having the attributes of click-chemistry reactions. For these reasons we named them as thiol-click photochemistry, being a very interesting pool of possibilities when building a biosensor., This work was supported by the European Union program Horizon 2020, projects H2020-PHC-634013 and H2020-ICT-644242, and by the Spanish Ministry of Economy and Competitiveness, project CTQ2016-75749-R. Authors thank the whole "Signal and Measurement" research group, from the IDM, UPV, for sharing space, research and life. Special thanks to Pilar Jimenez-Meneses, Rafael Alonso, Daniel Gonzalez-Lucas, Pilar Aragon and Patricia Noguera for their contribution to the development of thiol photoattaching chemistry and surface wettability modulation.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Computational binding study of cardiac troponin I antibody towards cardiac versus skeletal troponin I

  • Sabek, Jad
  • Martinez-Perez, Paula
  • García-Rupérez, Jaime|||0000-0002-2036-0084
[EN] A computational study of the interaction of cardiac troponin I (cTnI) with its specific antibody and of that antibody with skeletal troponin I (sTnI), the principal interferon of cTnI, is carried out. Computational and simulation tools such as FTSite, FTMap, FTDock and pyDock are used to determine the binding sites of these molecules and to study their interactions and molecular docking performance, allowing us to obtain relevant information related with the antigen-antibody interaction for each of the targets. In the context of the development of immunosensing platforms, this type of computational analysis allows performing a preliminary in-silico affinity study of the available bioreceptors for a better selection when moving to the experimental stage, with the subsequent saving in cost and time., Cardiac troponin I (cTnI); Skeletal troponin I (sTnI); Immunosensing; Binding site; Molecular docking; FTSite; FTMap; FTDock; pyDock