Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 39
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Thiol ene click chemistry towards easy microarraying of half-antibodies

  • Alonso Ruiz, Rafael
  • Jimenez-Meneses, P.
  • García-Rupérez, Jaime|||0000-0002-2036-0084
  • Bañuls Polo, María-José|||0000-0002-2422-7731
  • Maquieira, Angel|||0000-0003-4641-4957
[EN] A UV light-induced thiol-ene coupling reaction (TEC) between half-antibodies (hIgG) and vinyl functionalized glass surfaces was run for biosensing in the microarray format. The accomplished performance improved that obtained with whole antibodies., The authors acknowledge the funding from the European Commission through the project H2020-634013-PHOCNOSIS. This work was also partly supported by MINECO CTQ/2013/45875-R, CTQ/2016/75749-R, FEDER, and GVA PROMETEO II 2014/40.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Recovery of Shallow Charge-Trapping Defects in CsPbX3 Nanocrystals through Specific Binding and Encapsulation with Amino-Functionalized Silanes

  • González-Pedro, Victoria|||0000-0002-8133-5958
  • Bañuls Polo, María-José|||0000-0002-2422-7731
  • Maquieira, Angel|||0000-0003-4641-4957
  • Veldhuis, Sjoerd A.
  • Begum, Raihana
  • Bruno, Annalisa
  • Mathews, N.
  • Mhaisalka, Subodh
[EN] We report a facile methodology to restore photoluminescence (PL) of CsPbBr3 nanocrystals (NCs) based on their postsynthetic modification with 3-aminopropyltriethoxysilane (APTES). By this methodology, a stark PL recovery factor of near 2-fold was obtained compared to their uncoated counterparts. H-1 NMR studies confirmed the presence of APTES on the NCs shell and provided more insight into the nature of the alkoxysilane passivation mechanisms. We further highlight that, contrary to expectations, preferential attachment of APTES does not take place through their amine terminal groups. The proposed surface-repair strategy can be extended to other halide compositions, yielding similarly effective 4-fold and 2-fold PL enhancements for CsPbCl3 and CsPbI3 NCs, respectively. Our work thus exemplifies that careful management of the perovskite NC interfaces and surface engineering is one of the most important frontiers in this emerging class of optoelectronic materials., This work was financially supported by FEDER projects BiHolog-CTQ2016-75749-R from MINECO and GVA PROMETEO II 2014/40. V.G-P. thanks Universitat Politecnica de Valencia for her postdoctoral fellowship (Grant-PAID-10-14) and for her research mobility grant (UPV- Research mobility Grant-PAID-00-15), and Miguel Cebrian for his help and valuable technical support. S.A.V., N.M., and S.M. acknowledge financial support by the National Research Foundation, Singapore under its Competitive Research Programme (NRF-CRP14-2014-03). S.A.V. thanks Alasdair Brown for help with the nanocrystal syntheses.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Experimental study of the evanescent-wave photonic sensors response in presence of molecular beacon conformational changes

  • Ruiz-Tórtola, Ángela
  • Prats-Quílez, Francisco
  • Gonzalez-Lucas, Daniel
  • Wheeler, Guy
  • Dalmay, Tamas
  • Bohlmann, Helge
  • Götzen, Reiner
  • Bañuls Polo, María-José|||0000-0002-2422-7731
  • Maquieira, Angel|||0000-0003-4641-4957
  • Griol Barres, Amadeu
  • Hurtado Montañés, Juan|||0000-0002-4870-7641
  • García-Rupérez, Jaime|||0000-0002-2036-0084
[EN] An experimental study of the influence of the conformational change suffered by molecular beacon (MB) probesupon the biorecognition of nucleic acid target oligonucleotides over evanescent wave photonic sensorsis reported. To this end, high sensitivity photonic sensors based on silicon photonic bandgap (PBG) structures were used, where the MB probes were immobilized via their 5 termination. Those MBs incorporate a biotin moiety close to their 3 termination in order to selectively bind a streptavidin molecule to them. The different photonic sensing responses obtained toward the target oligonucleotide detection, when the streptavidin molecule was bound to the MB probes or not, demonstrate the conformational change suffered by the MB upon hybridization, which promotes the displacement of the streptavidin molecule away from the surface of the photonic sensing structure., Horizon 2020 Framework Programme, Grant/Award Number: ICT-644242; MINECO, Grant/Award Number: CTQ/2016/75749-R
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Síntesis, estabilización y funcionalización de nanocristales de perovskita de haluros metálicos para su empleo como reveladores y marcadores en histoquímica, cultivos celulares y biosensado

  • Collantes Pablo, Cynthia
[ES] Los nanocristales de perovskita de haluros metálicos, cuya fórmula general es ABX3 (A = Cs+, CH3NH3+, CH(NH2)2+; B = Pb+2, Sn+2; y X = Cl-, Br-, I-) son una clase de nanomateriales semiconductores que han tenido un gran impacto en fotovoltaica y en la fabricación de dispositivos emisores de luz debido a sus excelentes propiedades optoelectrónicas, entre ellas, la capacidad para transportar cargas, generar electricidad y producir luz. Aunque se trata de un área menos explorada, tienen potencial para convertirse en marcadores luminiscentes en aplicaciones biológicas por sus dimensiones nanométricas (4-15 nm) y por exhibir propiedades ópticas únicas, entre ellas: alto rendimiento cuántico de fluorescencia, espectro de emisión estrecho y posibilidad de modular su emisión en función de su tamaño y composición para obtener una amplia gama de colores en la región visible (410-700 nm), lo que los convierte en candidatos prometedores en multiplexado. Además, presentan absorción multifotónica en el cercano infrarrojo y emisión upconversion, siendo una ventaja en diagnóstico por imagen, ya que se emplea una radiación que es inocua para los tejidos, tiene mayor penetración, reduce la autofluorescencia celular y mejora la relación señal-ruido. A pesar de las excelentes propiedades ópticas de estos materiales, tienden a degradarse frente a la humedad, oxígeno, luz y alta temperatura, lo que supone una clara limitación para el desarrollo de sus aplicaciones en biosensado y diagnóstico por imagen. Durante los últimos años, los avances en los métodos de encapsulación han permitido mejorar su estabilidad frente a agentes externos, generando estructuras core-shell o integrándose en matrices de una gran variedad de materiales, entre los que se incluyen óxidos inorgánicos, polímeros u otros semiconductores. Esta tesis se ha centrado en el desarrollo de diferentes nanopartículas de perovskita estables en medio acuoso para su utilización como marcadores luminiscentes en biosensado o bioimagen in vitro. En todas las metodologías propuestas se ha pretendido que las partículas resultantes cumplan con una serie de requisitos, principalmente: tamaño nanométrico (< 200 nm), elevado rendimiento cuántico de fluorescencia, estabilidad química y estructural en tampón salino o medios de cultivo, y fácil conjugación a biorreceptores específicos. Esta tesis contribuye al avance en el desarrollo de nanomateriales luminiscentes basados en perovskitas de haluros metálicos, abordando el desafío que supone su estabilización en medio acuoso y demostrando su viabilidad en medios biológicos. Se prevé que, en un futuro, sea posible su implantación en el desarrollo de plataformas analíticas de alto rendimiento que permitan la detección y/o cuantificación óptica de analitos de interés clínico, medioambiental o alimentario en el punto de atención, cumpliendo con los criterios de rapidez, fiabilidad, facilidad de manejo y bajo coste, superando en sensibilidad y capacidad de multiplexado a los sistemas actuales, la mayoría de ellos basados en nanopartículas de oro, colorantes orgánicos o sistemas quimioluminiscentes., [CA] Els nanocristals de perovskita d'halurs metàl·lics, amb fórmula general ABX3 (A = Cs+, CH3NH3+, CH(NH2)2+; B = Pb+2, Sn+2; y X = Cl-, Br-, I-), són una classe de nanomaterials semiconductors que han tingut un gran impacte en fotovoltaica i en la fabricació de dispositius emissors de llum a causa de les seues excel·lents propietats optoelectròniques, entre elles, la capacitat per a transportar càrregues, generar electricitat i produir llum. Encara que es tracta d'una àrea menys explorada, tenen potencial per a convertir-se en marcadors luminescents en aplicacions biològiques per les seues dimensions nanomètriques (4-15 nm) i per exhibir propietats òptiques úniques, entre elles: alt rendiment quàntic de fluorescència, espectre d'emissió estret i possibilitat de modular la seua emissió en funció de les seues dimensions i composición, de manera que es pot obtindre una àmplia gamma de colors a la regió visible (410-700 nm), la qual cosa els converteix en candidats prometedors en multiplexatge. A més, presenten absorció multifotònica en el pròxim infraroig i emissió upconversion, sent un avantatge en diagnòstic per imatge, ja que s'empra una radiació que és innòcua per als teixits, té major penetració, redueix l'autofluorescència cel·lular i millora la relació senyal-soroll. Malgrat les excel·lents propietats òptiques d'aquests materials, tendeixen a degradar-se enfront de la humitat, oxigen, llum i alta temperatura, la qual cosa suposa una clara limitació per al desenvolupament de les seues aplicacions en biosensat i diagnòstic per imatge. Durant els últims anys, els avanços en els mètodes d'encapsulació han permés millorar la seua estabilitat enfront d'agents externs, generant estructures core-shell o integrant-se en matrius d'una gran varietat de materials, entre els quals s'inclouen òxids inorgànics, polímers o altres semiconductors. Aquesta tesi s'ha centrat en el desenvolupament de diferents nanopartícules de perovskita estables al mig aquós per a la seua utilització com a marcadors luminescents en biosensat o bioimatge in vitro. En totes les metodologies proposades s'ha pretés que les partícules resultants complisquen amb una sèrie de requisits, principalment: grandària nanomètric (< 200 nm), elevat rendiment quàntic de fluorescència, estabilitat química i estructural en tampó salí o medis de cultiu, i fàcil conjugació a biorreceptors específics. Aquesta tesi contribueix a l'avanç en el desenvolupament de nanomaterials luminescents basats en perovskitas d'halurs metàl·lics, abordant el desafiament que suposa la seua estabilització al mig aquós i demostrant la seua viabilitat en mitjans biològics. Es preveu que, en un futur, siga possible la seua implantació en el desenvolupament de plataformes analítiques d'alt rendiment que permeten la detecció i/o quantificació òptica d'anàlits d'interés clínic, mediambiental o alimentari en el punt d'atenció, complint amb els criteris de rapidesa, fiabilitat, facilitat de maneig i baix cost, superant en sensibilitat i capacitat de multiplexatge als sistemes actuals, la majoria d'ells basats en nanopartícules d'or, colorants orgànics o sistemes quimioluminescents., [EN] Metal halide perovskite nanocrystals, with the general formula ABX3 (A = Cs+, CH3NH3+, CH(NH2)2+; B = Pb+2, Sn+2; y X = Cl-, Br-, I-), constitute a new class of semiconductor nanomaterials with a significant impact on photovoltaic industry and fabrication of light-emitting devices due to their excellent optoelectronic properties, including the ability to transport charges, generate electricity and produce light. While it has not been deeply explored yet, they have the potential to become luminescent labels in biological applications, given their nanometric size (4-15 nm) and unique optical properties, such as high photoluminescence quantum yield, narrow emission spectra, and the possibility to tune their emission based on size and composition. This enables a wide color gamut in the visible region (410-700 nm), making them promising candidates in multiplexing. Moreover, perovskite nanocrystals exhibit strong multi-photon absorption properties in the near-infrared region and upconversion emission, which are an advantage for bioimaging applications since near-infrared radiation is less hazardous to living organisms, has deeper tissue penetration, reduces cellular autofluorescence and enhances signal-to-noise ratio. Despite the exceptional optical properties of perovskite nanocrystals, their potential in biosensing and bioimaging applications is hindered by their poor stability against moisture, oxygen, light and heat. To overcome these issues, in the last years, several strategies have been developed to improve their stability through the encapsulation of perovskite nanocrystals in a wide variety of protective materials, such as inorganic oxides, polymers, or semiconductors, in the form of core-shell nanoparticles or embedded in a matrix. This thesis focuses on the synthesis and stabilization of perovskite nanocrystals in aqueous environments with the aim of using them as luminescent labels in biosensing or in vitro bioimaging. Different methodologies have been employed to yield particles that meet specific requirements: nanometric size (< 200 nm), high photoluminescence quantum yield, robust chemical and structural stability in saline buffers or culture media, and facile conjugation with bioreceptors. This thesis contributes to the development of luminescent nanomaterials based on metal halide perovskite nanocrystals, facing the challenge of stabilizing them in aqueous media and testing their viability in biologic media. We envision that, in the near future, it will be possible to incorporate perovskite nanoparticles in the development of high-throughput analytical platforms for the optical detection and/or quantification of clinically, environmentally or food-related analytes at the point of care, meeting the criteria of speed, reliability, ease of use, and low cost, surpassing current systems in sensitivity and multiplexing, most of them based on gold nanoparticles, organic dyes or chemiluminescent systems., Quiero expresar mi gratitud a Mª José Bañuls y Ángel Maquieira, por concederme la beca de formación predoctoral FPI (BES-2017-080242), asociada al proyecto de Biosensores holográficos. Prueba de concepto y demostración en aplicaciones clínicas (CTQ2016-75749-R), financiado por el Ministerio de Economía y Competitividad
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Digital versatile discs as platforms for multiplexed genotyping based on selective ligation and universal microarray detection

  • Tortajada-Genaro, Luis Antonio|||0000-0003-4021-5607
  • Niñoles Rodenes, Regina|||0000-0002-7862-9509
  • Maquieira, Angel|||0000-0003-4641-4957
  • Mena-Mollá, Salvador
[EN] The development of a high-performance assay readout using integrated detectors is a current challenge in the implementation of DNA tests in diagnostic laboratories, particularly for supporting pharmacogenetic tests. A method for allelic discrimination, associated with single nucleotide polymorphisms (SNPs), is presented. Genomic DNA is extracted from blood and buccal swab samples. The procedure comprises fast multiplex ligation-dependent probe amplification, PCR amplification using universal primers and subsequent barcode hybridization. In this last step, each product is recognized by the specific probes immobilized on the surface of an optical disc. Assay results can be obtained with a disc reader. The optical sensing method in a DNA microarray format was optimized and evaluated for the simultaneous identification of 28 polymorphisms associated with psychiatric pharmacogenomics. The target biomarkers were located in the genes related to drug-metabolizing enzymes and drug transporters. The multiplexing capability and assay selectivity strongly depended on correct design (ligation probes, tails and barcodes). The discriminant analysis of reader outputs (spot intensities) led to patients being classified into different allelic populations. The obtained assignations correlated properly with the results provided by the reference technique (bead arrays), and the assay ended in an 8-fold shorter time using affordable equipment. The combination of a highly selective genotyping reaction as array-MLPA and the compact disc technology provides a reliable point-of-care approach. This genotyping tool is useful for the selection of personalized drug therapies in decentralized clinical laboratories., The authors acknowledge the financial support received from the Generalitat Valenciana (GVA-PROMETEOII/2014/040 Project) through the FEDER funds and the Spanish Ministry of Economy and Competitiveness (the MINECO CTQ2016-75749- R Project)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Recent advances and challenges in food-borne allergen detection

  • Sena-Torralba, Amadeo
  • Pallás-Tamarit, Yeray|||0000-0002-1167-5631
  • Morais, Sergi|||0000-0002-3722-2358
  • Maquieira, Angel|||0000-0003-4641-4957
[EN] Food allergy is reported as the commonest adverse reaction to food components, whose prevalence has increased in recent years. As food avoidance is mainly in practice the only way to prevent hypersensitive consumers from ingesting allergenic substances, it is imperative to provide complete and accurate in-formation on food ingredients. In this scenario, there is a need for precise, fast and cost-effective methods for the high-throughput screening of specific allergen content in food products. This work reviews recent approaches, existing kits for food-borne allergen detection and cutting-edge applications by focusing on the sensitivity, selectivity and applicability of current methods in food samples. In addition, the advantages, benefits and limitations of each approach are discussed to establish the most suitable methods and which challenges are to be addressed in forthcoming years from an analytical viewpoint. (C) 2020 Elsevier B.V. All rights reserved., This work has been funded by the Agencia Estatal de Investigacion, Spain (CTQ2016-75749-R, FEDER)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Detección de mutaciones en oncogenes en el tratamiento dirigido al cáncer colorrectal

  • Tortajada-Genaro, Luis Antonio|||0000-0003-4021-5607
  • Maquieira, Angel|||0000-0003-4641-4957
  • Martorell-Tejedor, Sara
  • Lázaro-Zaragozá, Ana
  • Palanca, Sarai
Proyecto ONCOMARKER (MINECO RTC-2015-3625-1), INTERBIOINTER (CTQ2013-45875-R), BIHOLOG (MINECO CTQ2016-75749-R) y GVA FEDER PROMETEO II 2014/040.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Magnetic concentration of allele-specific products from recombinase polymerase amplification

  • Martorell-Tejedor, Sara
  • Tortajada-Genaro, Luis Antonio|||0000-0003-4021-5607
  • Maquieira, Angel|||0000-0003-4641-4957
[EN] The studied challenge is the specific detection of low-abundant genomic variants that differ by a single nucleotide from the wild type. The combination of blocked recombinase polymerase amplification (RPA) and selective capture by probes immobilised on magnetic-core particles integrated into a flow system is presented. The sensing principle was demonstrated as the effective concentration-detection of the specific generated products was achieved. The analytical performance of resulting assay was successfully compared to PCR-based methods or array formats, providing faster effective detection of the selective products. As proof of concept, the single-nucleotide substitutions of the KRAS gene at codon 12 were studied in chip with parallel microchambers and permanent magnets. The blocked RPA products (generated at 37 degrees C) from tumour biopsies (extracted DNA 4 ng) provided a specific fluorescent bead-line that depends on the present mutation. The results agree with those reported by next-generation sequencing and provide new opportunities for in vitro diagnostic and personalised medicine., The authors acknowledge the financial support received from EU FEDER, the Spanish Ministry of Economy and Competitiveness (MINECO project CTQ2016-75749-R and Technical Support Personnel PTA- 2016).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Study of Strategies for Genetic Variant Discrimination and Detection by Optosensing

  • Lázaro Zaragozá, Ana
[ES] La medicina actual se dirige hacia un enfoque más personalizado basándose en el diagnóstico molecular del paciente a través del estudio de biomarcadores específicos. Aplicando este principio molecular, el diagnóstico, pronóstico y selección de la terapia se apoyan en la identificación de variaciones específicas del genoma humano, como variaciones de un único nucleótido (SNV). Para detectar estos biomarcadores se dispone de una amplia oferta de tecnologías. Sin embargo, muchos de los métodos en uso presentan limitaciones como un elevado coste, complejidad, tiempos de análisis largos o requieren de personal y equipamiento especializado, lo que imposibilita su incorporación masiva en la mayoría de los sistemas sanitarios. Por tanto, existe la necesidad de investigar y desarrollar soluciones analíticas que aporten información sobre las variantes genéticas y que se puedan implementar en diferentes escenarios del ámbito de la salud con prestaciones competitivas y económicamente viables. El objetivo principal de esta tesis ha sido desarrollar estrategias innovadoras para resolver el reto de la detección múltiple de variantes genéticas que se encuentran en forma minoritaria en muestras biológicas de pacientes, cubriendo las demandas asociadas al entorno clínico. Las tareas de investigación se centraron en la combinación de reacciones de discriminación alélica con amplificación selectiva de DNA y el desarrollo de sistemas ópticos de detección versátiles. Con el fin de atender el amplio abanico de necesidades, en el primer capítulo, se presentan resultados que mejoran las prestaciones analíticas de la reacción en cadena de la polimerasa (PCR) mediante la incorporación de una etapa al termociclado y de un agente bloqueante amplificando selectivamente las variantes minoritarias que fueron monitorizadas mediante fluorescencia a tiempo real. En el segundo capítulo, se logró la discriminación alélica combinando la ligación de oligonucleótidos con la amplificación de la recombinasa polimerasa (RPA), que al operar a temperatura constante permitió una detección tipo point-of-care (POC). La identificación de SNV se llevó a cabo mediante hibridación en formato micromatriz, utilizando la tecnología Blu-Ray como plataforma de ensayo y detección. En el tercer capítulo, se integró la RPA con la reacción de hibridación alelo especifica en cadena (AS-HCR), en formato array para genotipar SNV a partir de DNA genómico en un chip. La lectura de los resultados se realizó mediante un smartphone. En el último capítulo, se presenta la síntesis de un nuevo reactivo bioluminiscente que se aplicó a la monitorización de biomarcadores de DNA a tiempo real y final de la RPA basada en la transferencia de energía de resonancia de bioluminiscencia (BRET), eliminando la necesidad de una fuente de excitación. Todas las estrategias permitieron un reconocimiento especifico de la variante de interés, incluso en muestras que contenían tan solo 20 copias de DNA genómico diana. Se consiguieron resultados sensibles (límite de detección 0.5% variante/total), reproducibles (desviación estándar relativa < 19%), de manera sencilla (3 etapas o menos), rápida (tiempos cortos de 30-200 min) y permitiendo el análisis simultaneo de varios genes. Como prueba de concepto, estas estrategias se aplicaron a la detección e identificación en muestras clínicas de biomarcadores asociados a cáncer colorrectal y enfermedades cardiológicas. Los resultados se validaron por comparación con los métodos de referencia NGS y PCR, comprobándose que se mejoraban los requerimientos técnicos y la relación coste-eficacia. En conclusión, las investigaciones llevadas a cabo posibilitaron desarrollar herramientas de genotipado con propiedades analíticas competitivas y versátiles, aplicables a diferentes escenarios sanitarios, desde hospitales a entornos con pocos recursos. Estos resultados son prometedores al dar respuesta a la demanda de tecnologías alternativas para el diagnóstico molecular personalizado., [CA] La medicina actual es dirigeix cap a un enfocament més personalitzat basant-se en el diagnòstic molecular del pacient a través de l'estudi de biomarcadors específics. Aplicant aquest principi molecular, el diagnòstic, pronòstic i selecció de la teràpia es recolzen en la identificació de variacions específiques del genoma humà, com variacions d'un únic nucleòtid (SNV). Per a detectar aquests biomarcadors, es disposa d'una àmplia oferta de tecnologies. No obstant això, molts dels mètodes en ús presenten limitacions com un elevat cost, complexitat, temps d'anàlisis llargues o requereixen de personal i equipament especialitzat, la qual cosa impossibilita la seua incorporació massiva en la majoria dels sistemes sanitaris. Per tant, existeix la necessitat d'investigar i desenvolupar solucions analítiques que aporten informació sobre les variants genètiques i que es puguen implementar en diferents escenaris de l'àmbit de la salut amb prestacions competitives i econòmicament viables. L'objectiu principal d'aquesta tesi ha sigut desenvolupar estratègies innovadores per a resoldre el repte de la detecció múltiple de variants genètiques que es troben en forma minoritària en mostres biològiques de pacients, cobrint les demandes associades a l'entorn clínic. Les tasques d'investigació es van centrar en la combinació de reaccions de discriminació al·lèlica amb amplificació selectiva de DNA i al desenvolupament de sistemes òptics de detecció versàtils. Amb la finalitat d'atendre l'ampli ventall de necessitats, en el primer capítol, es presenten resultats que milloren les prestacions analítiques de la reacció en cadena de la polimerasa (PCR) mitjançant la incorporació d'una etapa al termociclat i d'un agent bloquejant amplificant selectivament les variants minoritàries que van ser monitoritzades mitjançant fluorescència a temps real. En el segon capítol, es va aconseguir la discriminació al·lèlica combinant el lligament d'oligonucleòtids amb l'amplificació de la recombinasa polimerasa (RPA), que en operar a temperatura constant va permetre una detecció tipus point-of-care (POC). La identificació de SNV es va dur a terme mitjançant hibridació en format micromatriu, utilitzant la tecnologia Blu-Ray com a plataforma d'assaig i detecció. En el tercer capítol, es va integrar la RPA amb la reacció d'hibridació al·lel específica en cadena (AS-HCR), en format matriu per a genotipar SNV a partir de DNA genòmic en un xip. La lectura dels resultats es va realitzar mitjançant un telèfon intel·ligent. En l'últim capítol, es presenta la síntesi d'un nou reactiu bioluminescent que es va aplicar al monitoratge de biomarcadors de DNA a temps real i final de la RPA basada en la transferència d'energia de ressonància de bioluminescència (BRET), eliminant la necessitat d'una font d'excitació. Totes les estratègies van permetre un reconeixement específic de la variant d'interès, fins i tot en mostres que només contenien 20 còpies de DNA genòmic diana. Es van aconseguir resultats sensibles (límit de detecció 0.5% variant/total), reproduïbles (desviació estàndard relativa < 19%), de manera senzilla (3 etapes o menys), ràpida (temps curts de 30-200 min) i permetent l'anàlisi simultània de diversos gens. Com a prova de concepte, aquestes estratègies es van aplicar a la detecció i identificació en mostres clíniques de biomarcadors associats a càncer colorectal i a malalties cardiològiques. Els resultats es van validar per comparació amb els mètodes de referència NGS i PCR, comprovant-se que es milloraven els requeriments tècnics i la relació cost-eficàcia. En conclusió, les investigacions dutes a terme van possibilitar desenvolupar eines de genotipat amb propietats analítiques competitives i versàtils, aplicables a diferents escenaris sanitaris, des d'hospitals a entorns amb pocs recursos. Aquests resultats són prometedors en donar resposta a la demanda de tecnologies alternatives per al diagnòstic molecular personalitzat., [EN] Current medicine is moving towards a more personalized approach based on the patients' molecular diagnosis through the study of specific biomarkers. Diagnosis, prognosis and therapy selection, applying this molecular principle, rely on identifying specific variations in the human genome, such as single nucleotide variations (SNV). A wide range of technologies is available to detect these biomarkers. However, many of the employed methods have limitations such as high cost, complexity, long analysis times, or requiring specialized personnel and equipment, making their massive incorporation in most healthcare systems impossible. Therefore, there is a need to research and develop analytical solutions that provide information on genetic variants that can be implemented in different health scenarios with competitive and economically feasible performances. The main objective of this thesis has been to develop innovative strategies to solve the challenge of multiple detection of genetic variants that are found in a minority amount in patient samples, covering the demands associated with the clinical setting. Research tasks focused on the combination of allelic discrimination reactions with selective DNA amplification and the development of versatile optical detection systems. In order to meet the wide range of needs, in the first chapter, the analytical performances of the polymerase chain reaction (PCR) were improved by incorporating a thermocycling step and a blocking agent to amplify selectively minority variants that were monitored by real-time fluorescence. In the second chapter, allelic discrimination was achieved by combining oligonucleotide ligation with recombinase polymerase amplification (RPA), which operates at a constant temperature, allowing point-of-care (POC) detection. SNV identification was carried out by hybridization in microarray format, using Blu-Ray technology as the assay platform and detector. RPA was integrated with allele-specific hybridization chain reaction (AS-HCR), in an array format to genotype SNV from genomic DNA on a chip in the third chapter. The reading of the results was performed using a smartphone. In the last chapter, a new bioluminescent reagent was synthesized. It was applied to real-time and endpoint DNA biomarker monitoring based on bioluminescence resonance energy transfer (BRET), eliminating the need for an excitation source. All the strategies allowed specific recognition of the target variant, even in samples containing as few as 20 copies of target genomic DNA. Sensitive (limit of detection 0.5% variant/total), reproducible (relative standard deviation < 19%), simple (3 steps or less), fast (short times of 30-200 min) results were achieved, allowing simultaneous analysis of several genes. As proof of concept, these strategies were applied to detect and identify biomarkers associated with colorectal cancer and cardiological diseases in clinical samples. The results were validated by comparison with reference methods such as NGS and PCR, proving that the technical requirements and cost-effectiveness were improved. In conclusion, the developed research made it possible to develop genotyping tools with competitive analytical properties and versatile, applicable to different healthcare scenarios, from hospitals to limited-resource environments. These results are promising since they respond to the demand for alternative technologies for personalized molecular diagnostics., The authors acknowledge the financial support received from the Generalitat Valenciana PROMETEO/2020/094, GRISOLIA/2014/024 PhD Grant and GVA-FPI-2017 PhD grant, the Spanish Ministry of Economy and Competitiveness MINECO projects CTQ2016-75749-R and PID2019-110713RB-I00 and European Regional Development Fund (ERDF).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Indirect Microcontact Printing to Create Functional Patterns of Physisorbed Antibodies

  • Juste-Dolz, Augusto Miguel|||0000-0003-4889-6419
  • Avella-Oliver, Miquel|||0000-0002-7293-6989
  • Puchades, Rosa|||0000-0002-9329-1593
  • Maquieira, Angel|||0000-0003-4641-4957
[EN] Microcontact printing (mu CP) is a practical and versatile approach to create nanostructured patterns of biomolecular probes, but it involves conformational changes on the patterned bioreceptors that often lead to a loss on the biological activity of the resulting structures. Herein we introduce indirect mu CP to create functional patterns of bioreceptors on solid substrates. This is a simple strategy that relies on physisorbing biomolecular probes of interest in the nanostructured gaps that result after patterning backfilling agents by standard mu CP. This study presents the approach, assesses bovine serum albumin as backfilling agent for indirect mu CP on different materials, reports the limitations of standard mu CP on the functionality of patterned antibodies, and demonstrates the capabilities of indirect mu CP to solve this issue. Bioreceptors were herein structured as diffractive gratings and used to measure biorecognition events in label-free conditions. Besides, as a preliminary approach towards sensing biomarkers, this work also reports the implementation of indirect mu CP in an immunoassay to detect human immunoglobulin E., This research was funded by the Spanish Ministry of Economy and Competitiveness (CTQ2016-75749-R), FEDER, Generalitat Valenciana (PROMETEO II/2014/040), and Universitat Politecnica de Valencia (FPI program).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Photo-click chemistry to create nucleic acids dextran-based microarrays

  • Díaz-Betancor, Zeneida
  • Bañuls Polo, María-José|||0000-0002-2422-7731
  • Maquieira, Angel|||0000-0003-4641-4957
[EN] In the literature, there are reports of the utilization of various hydrogels to create generic platforms for protein microarray applications. Here, a novel strategy was developed to obtain high-performance microarrays. In it, a dextran hydrogel is used to covalently immobilize oligonucleotides and proteins. This method employs aqueous solutions of dextran methacrylate (Dx-MA), which is a biocompatible photopolymerizable monomer. Capture probes are immobilized inside the hydrogel via a light-induced thiol-acrylate coupling reaction at the same time as the dextran polymer is formed. Hydrogel microarrays based on this technique were prepared on different surfaces, such as a Blu-ray Disk and polycarbonate or alkene-functionalized glass slides, and these systems showed high probe-loading capabilities and good biorecognition yields. This methodology presents advantages such as a low cost, a short analysis time, a low limit of detection, and multiplexing capabilities, among others. Confocal fluorescence microscopy analysis demonstrated that in these hydrogel-based microarrays, receptor immobilization and the biorecognition event occurred within the hydrogel and not merely on the surface., Funding from MINECO through the project BIHOLOG CTQ/2016/75749-R is acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Covalent attachment of biotinylated molecular beacons via thiol-ene coupling. A study on conformational changes upon hybridization and streptavidin binding

  • Gonzalez-Lucas, Daniel
  • Bañuls Polo, María-José|||0000-0002-2422-7731
  • García-Rupérez, Jaime|||0000-0002-2036-0084
  • Maquieira, Angel|||0000-0003-4641-4957
[EN] The authors describe a method for the detection of DNA by using immobilized molecular beacons (MBs) on the surface of silicon, with a view on possible application in biosensing. MB hybridization and protein recognition were interrogated on silicon-oninsulator (SOI) surfaces by using fluorescently tagged probes. In order to better understand the conformational changes that occur to MBs upon hybridization, the process was studied by using dual polarization interferometry (DPI). A model system was developed that matches thickness, mass, and density parameters. The results experimentally demonstrate that hybridization promotes the displacement of a protein away from the surface. This finding may be further exploited in techniques such as photonic sensors, thereby paving the way to the design of more sensitive biosensors based on the use of MBs., This research was funded by the European Union Horizon 2020 program (ICT-644242 SAPHELY project), the MINECO projects CTQ/2013/45875-R, and CTQ/2016/75749-R, FEDER, and GVA PROMETEO II 2014/40.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Enhancing the sensitivity in optical biosensing by striped arrays and frequency-domain analysis

  • Sancho-Fornes, Gabriel
  • Avella-Oliver, Miquel|||0000-0002-7293-6989
  • Carrascosa Rubio, Javier|||0009-0003-4615-5278
  • Morais, Sergi|||0000-0002-3722-2358
  • Puchades, Rosa|||0000-0002-9329-1593
  • Maquieira, Angel|||0000-0003-4641-4957
[EN] An approach to enhance the sensitivity of optical biosensors is developed. It is based on patterning strips of biochemical probes and signal processing (frequency-domain analysis, FDA) to the resulting analytical data after a biorecognition assay. This paper introduces FDA, demonstrates for the first time its potential in real bioanalytical systems, describes its critical parameters, and discusses how to optimize them to efficiently exploit this approach for optical biosensing. The results show that FDA enables for the selective identification and removal of the undesired noise contributions from the analytical signal arising from a biorecognition event of interest, thus increasing signal-to-noise ratios and, therefore, enhancing the sensitivity of the analysis. In this study, we proof the concept with a model immunassay system for IgGs detection (BSA/anti-BSA) that achieves a sensitivity enhancement of up to 3 orders of magnitude, and then FDA is also demonstrated in a sandwich immunoassay to quantify casein that reaches a limit of detection of 4 ng/mL (174 pM). Beyond these particular assays, this work also addres to stablish the basis of this approach and to provide keys to stimulate future developments that expand the potential of FDA to other biorecognition assays, transduction systems, and applications., This research was supported by FEDER and the Spanish Ministry of Economy and Competitiveness (CTQ2016-75749-R).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Disk-based one-dimensional photonic crystal slabs for label-free immunosensing

  • Sancho-Fornes, Gabriel
  • Fernández-Sánchez, María Estrella
  • Avella-Oliver, Miquel|||0000-0002-7293-6989
  • Carrascosa Rubio, Javier|||0009-0003-4615-5278
  • Brun, Eva M.|||0000-0003-0118-6911
  • Maquieira, Angel|||0000-0003-4641-4957
[EN] One-dimensional photonic crystal slabs are periodic optical nanostructures that produce guided-mode resonance. They couple part of the incident light into the waveguide generating bandgaps in the transmittance spectrum, whose position is sensitive to refractive index variations on their surface. In this study, we present one-dimensional photonic crystal slab biosensors based on the internal nanogrooved structure of Blu-ray disks for label-free immunosensing. We demonstrated that this polycarbonate structure coated with a critical thickness of TiO2 generates guided-mode resonance. Its optical behavior was established comparing it with other compact disk structures. The results were theoretically calculated and experimentally demonstrated, all them being in agreement. The bioanalytical performance of these photonic crystals was experimentally demonstrated in a model assay to quantify IgGs as well as in two immunoassays to determine the biomarkers C-reactive protein and lactate dehydrogenase (detection limits of 0.1, 87, and 13 nM, respectively). The results are promising towards the development of new low-cost, portable, and label-free optical biosensors that join these photonic crystals with dedicated bioanalytical scanners based on compact disk drives., This research was supported by FEDER grants and the Spanish Ministry of Economy and Competitiveness projects (CTQ2013-45875-R and CTQ2016-75749-R).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Designing stable lead halide perovskite nanocrystals: From a single particle to nanocomposites

  • Collantes-Pablo, Cynthia
  • Teixeira, William|||0000-0002-6729-9508
  • González-Pedro, Victoria|||0000-0002-8133-5958
  • Bañuls Polo, María-José|||0000-0002-2422-7731
  • Maquieira, Angel|||0000-0003-4641-4957
[EN] Metal halide perovskite nanocrystals have attracted substantial interest given their easy manufacturing, superior Photoluminiscence Quantum Yield and striking optical properties. Despite the huge potential of such materials, their practical implementation and future technological applications need to overcome stability drawbacks: spontaneous degradation, which is accelerated by external stressors (i.e., moisture, oxygen, heat, light, and their combinations), poor phase stability and loss of their colloidal stability due to ligand lability. Within this framework, the understanding of their surface chemistry features and ligand-binding patterns plays a key role in improving the robustness and stability of perovskite nanocrystals. This review presents a comprehensive study of state-of-the-art and current challenges in surface chemistry, interface engineering and encapsulation methodologies for stabilizing lead halide perovskite nanoparticles. We first introduced lead halide perovskite structural and optical properties and a brief discussion of synthesis methods. Next, we explored recent developments in encapsulation methods in different protective matrices comprising from core-shell to macroscale nanocomposites. We also analyzed the advantages and shortcomings of each approach according to their final applications. Finally, we concluded with a discussion of open research challenges and future directions in the aforementioned aspects., This work was financially supported by EU FEDER Project ADBIHOL/AEI/10.13039/501100011033 from MCIN/AEI and PROMETEO/2020/094 from the Generalitat Valenciana. C.C. thanks the Spanish Ministry of Economy and Competitiveness for her predoctoral contract (FPI/17 Scholarship) . W.T acknowledges financial support for Ph.D studies (FPI-UPV 2019 grants).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Vías de inmovilización de biomoléculas sobre SU-8 y otras superficies poliméricas para su utilización en biosensado óptico sin marcaje

  • Díaz Betancor, Zeneida
[ES] La presente tesis "Vías de inmovilización de biomoléculas sobre SU-8 y otras superficies poliméricas para su utilización en biosensado óptico sin marcaje" tiene como objetivo el diseño, desarrollo y evaluación de diferentes métodos de anclaje de biorreceptores en distintos materiales, en formato de micromatriz, con aplicación en biosensado. En la actualidad sigue siendo un área de creciente interés desarrollar nuevos sistemas de análisis para la detección de analitos, más sensibles y selectivos, con tiempos de análisis reducidos, miniaturizables y automatizables. Estos desarrollos pueden aplicarse en dispositivos biosensores que encuentran su aplicación en campos tan diversos como diagnóstico clínico, medicina forense y medio ambiente. Con el objetivo de desarrollar biosensores con prestaciones mejoradas se estudiaron estrategias de inmovilización de sondas sobre el soporte de ensayo basadas en el empleo de hidrogeles. En una primera fase, los desarrollos se realizaron usando tecnología de micromatrices de fluorescencia, que permite utilizar una menor cantidad de muestra y analizar múltiples analitos y muestras a la vez, reduciendo el tiempo de análisis y el coste Posteriormente, los desarrollos ya optimizados se emplearon para la puesta a punto de un biosensor óptico sin marcaje de tipo BICELL (Biophotonic Sensing Cells) en colaboración con la UPM (Universidad Politecnica de Madrid), que se aplicaron a sistemas modelo y a problemas reales. Asimismo, y en colaboración con el Centro de Tecnología Nanofotónica de la UPV, se implementó la estrategia de inmovilización a través del uso de hidrogeles, en biosensores ópticos sin marcaje constituidos por guías de ondas corrugadas. En este caso, además de la inmovilización a través de hidrogeles, se estudió un método de inmovilización covalente de fragmentos de anticuerpos que permitió su fijación orientada y muy próxima a la superficie del sensor. La tesis se estructura en seis capítulos. En el Capítulo 1 se da una visión general del concepto de biosensado, atendiendo a las distintas clasificaciones y los diferentes aspectos que hay que considerar en su diseño. En el Capítulo 2 se plantean los objetivos generales y particulares de la tesis. El Capítulo 3 plantea la aplicación de dos hidrogeles fotoinducidos derivados de fosforicolina y dextrano para mejorar la inmovilización de biomoléculas en formato micromatriz, sobre superficies planas y usando el formato de micromatriz de fluorescencia para realizar ensayos de detección con proteínas y oligonucleótidos. La polimerización del gel y el anclaje de las sondas se lleva a cabo simultáneamente mediante la utilización de reacciones fotoinducidas empleando la química click de acoplamiento tiol-eno. En el Capítulo 4 se implementa el método desarrollado en micromatriz con uno de los hidrogeles en dos tipos de biosensores interferométricos sin marcaje fabricados en SU-8. Con ambos sensores se detecta CRP en suero con muy buena sensibilidad (, LOD de 21 pg/mL). Por otro lado, esta estrategia se ensaya también en sensores nanofotónicos basados en guías de ondas corrugadas con resultados prometedores. En este capítulo también se pone a punto y se evalúa en tiempo real la inmovilización de fragmentos de anticuerpo sobre la superficie del sensor nanofotónico, mediante la reacción de acoplamiento tiol-eno inducida por luz UV. La monitorización en tiempo real permite demostrar el papel indispensable de la luz en el proceso de inmovilización. Utilizando esta aproximación se ensaya la detección sin marcaje de tres biomarcadores cardíacos de interés (CRP, cTnI/T y Mioglobina). El quinto capítulo se dedica a la descripción detallada de todos los procedimientos experimentales que se llevan a cabo en los Capítulos 3 y 4. Finalmente, el Capítulo 6 recoge las conclusiones alcanzadas a partir de los resultados obtenidos en el desarrollo de la tesis doctoral., [EN] This thesis "Biomolecule immobilization approaches on SU-8 and other polymer surfaces for label-free optical biosensing" aims to design, develop and evaluate different methods for anchoring bioreceptors in different materials, in a microarray format, with application in biosensing. Currently, it is still an area of growing interest to develop new analysis systems for the detection of biomolecules, being more sensitive and selective, with reduced analysis time, miniaturizable and automatable. These developments can be applied in biosensing devices that find utility in fields as diverse as clinical diagnosis, forensic medicine and environmental monitoring. To develop biosensors with improved performance, here strategies for immobilization of probes on the test support based on the use of hydrogels were studied. In a first phase, the developments were carried out using microarray technology, which uses lower amount of sample and can analyze multiple targets and samples at the same time, reducing tests time and cost. Subsequently, the optimized developments were used to develop, in collaboration with UPM (Polytechnic University of Madrid), a label-free optical biosensor based onBICELLs (Biophotonic Sensing Cells), which were applied to model systems and real samples. Likewise, and in collaboration with the Nanophotonic Technology Center at UPV, the hydrogel-based immobilization strategy was implemented in other label-free nanophotonic biosensors consisting of corrugated waveguides. In this case, in addition to immobilization through hydrogels, we studied a method of covalent immobilization of antibody fragments that allowed them to be oriented and very close to the sensor surface. Thus the thesis is organized into six chapters. Chapter 1 gives an overview of the concept of biosensing, and takes into account the different classifications and different items that must be considered in its design. Chapter 2 sets out the general and particular objectives of the thesis. Chapter 3 discusses the application of two photoinduced hydrogels, derived from phosphoricoline and dextran, respectively, to improve the immobilization of biomolecules in microarray format, on planar surfaces and using the fluorescence microarray format to perform detection assays with proteins and oligonucleotides. The polymerization of the gel and the anchoring of the probes are carried out using photoinduced reactions using the thiol-ene coupling click chemistry, and derivatives, performing both steps simultaneously. In Chapter 4 the method developed with one of the hydrogels in microarray format is transferred to two types of SU-8 based interferometric label-free biosensors. Both biosensors detected CRP in blood serum with very good sensitivity (LOD de 21 pg/mL). Besides, this strategy is also tested on nanophotonic sensors based on corrugated waveguides with promising results. In this chapter, immobilization of antibody fragments on the surface of the nanophotonic sensor is also performed and assessed in real time by the UV light-induced thiol-ene coupling reaction. Real-time monitoring shows the essential role of light in the immobilization process. Using this approach, the label-free detection of three cardiac biomarkers of interest (CRP, cTnI / T and Myoglobin) is tested. The fifth chapter is devoted to the detailed description of all the experimental procedures that are carried out in chapters 3 and 4. Finally, Chapter 6 collects the conclusions reached from the results obtained in the development of the doctoral thesis., [CA] La present tesi "Vies d'immobilització de biomolècules sobre SU-8 i altres superfícies polimèriques per a la seva utilització en biosensado òptic sense marcatge" té com a objectiu el disseny, desenvolupament i avaluació de diferents mètodes d'ancoratge de bioreceptors en diferents materials, en format de micromatriu , amb aplicació en biosensat. En l'actualitat segueix sent una àrea de creixent interès desenvolupar nous sistemes d'anàlisi per a la detecció de biomolècules, que siguen més sensibles i selectius, amb temps d'anàlisi reduïts, miniaturizables i automatitzables. Aquests desenvolupaments poden aplicar-se en dispositius biosensors que troben la seva utilitat en camps tan diversos com diagnòstic clínic, medicina forense i medi ambient. Amb l'objectiu de desenvolupar biosensors amb prestacions millorades es van estudiar estratègies d'immobilització de sondes sobre el suport d'assaig basades en l'ús de hidrogels. En una primera fase, els desenvolupaments es van realitzar usant tecnologia de micromatrius, que permet utilitzar una menor quantitat de mostra i analitzar múltiples dianes i mostres alhora, reduint el temps d'anàlisi i el cost Posteriorment, els desenvolupaments ja optimitzats es van emprar per a la posada a punt d'un biosensor òptic sense marcatge de tipus BICELL (Biophotonic Sensing Cells) en col·laboració amb la UPM (Universitat Politècnica de Madrid), que es van aplicar a sistemes model i als problemes reals. Així mateix, i en col·laboració amb el Centre de Tecnologia Nanofotònica de la UPV, es va implementar l'estratègia d'immobilització a través de l'ús de hidrogels, en biosensors òptics sense marcatge constituïts per guies d'ones corrugades. En aquest cas, a més de la immobilització mitjançant hidrogels es va estudiar un mètode d'immobilització covalent de fragments d'anticossos que va permetre la seva unió orientada i molt propera a la superfície del sensor. Així donç, la tesi s'estructura en sis capítols. En el capítol 1 es dóna una visió general delconcepte de biosensat, atenent les diferents classificacions i els diferents aspectes que cal considerar en el seu disseny. En el capítol 2 es plantegen els objectius generals i particulars de la tesi. El Capítol 3 planteja l'aplicació de dos hidrogels fotoinduïts derivats de fosforicolina i dextrà respectivament per millorar la immobilització de biomolècules en format micromatriu, sobre superfícies planes i usant el format de micromatriu de fluorescència per a realitzar assajos de detecció amb proteïnes i oligonucleòtids. La polimerització dell gel i l'ancoratge de les sondes es porta a terme simultàniament mitjançant la utilització de reaccions fotoinducides emprant la química click d'acoblament tiol-eno, i derivades. En el capítol 4 s'implementa el mètode desenvolupat en micromatriu amb un dels hidrogels en dos tipus de biosensors interferométricos sense marcatge basats en SU-8. Amb tots dos sensors es detecta CRP en sèrum sanguini amb molt bona sensibilitat (LOD de 21 pg/mL). D'altra banda, aquesta estratègia s'assaja també en sensors nanofotònics basats en guies d'ones corrugades amb resultats prometedors. En aquest capítol també es posa a punt i s'avalua en temps real la immobilització de fragments d'anticòs sobre la superfície del sensor nanofotònic, mitjançant la reacció d'acoblament tiol-eno induïda per llum UV. El monitoratge en temps real permet demostrar el paper indispensable de la llum en el procés d'immobilització. Utilitzant aquesta aproximació s'assaja la detecció sense marcatge de tres biomarcadors cardíacs d'interès (CRP, cTnI / T i Mioglobina). El cinquè capítol es dedica a la descripció detallada de tots els procediments experimentals que es duen a terme en els capítols 3 i 4. Finalment, el Capítol 6 recull les conclusions assolides a partir dels resultats obtinguts en el desenvolupament de la tesi doctoral., Agradecer a la financiación de esta investigación por Garantía Juvenil, FEDER y los proyectos del MINECO CTQ / 2016/75749‐R y TEC / 2017/84846‐R. Además, fue apoyado por el Programa Horizonte 2020 de la Unión Europea en el marco del proyecto H2020‐PHC‐634013 (PHOCNOSIS).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Monodispersed CsPb2Br5@SiO2 Core-Shell Nanoparticles as Luminescent Labels for Biosensing

  • Collantes-Pablo, Cynthia
  • González-Pedro, Victoria|||0000-0002-8133-5958
  • Bañuls Polo, María-José|||0000-0002-2422-7731
  • Maquieira, Angel|||0000-0003-4641-4957
[EN] Despite the rising advances in the field of metal halide perovskite nanocrystals (NCs), the exploitation of such nanoparticles as luminescent labels for ex vivo imaging and biosensing is still unclear and in the early stages of investigation. One of the major challenges toward the implementation of metal halide perovskite NCs in biosensing applications is to produce monodispersed nanoparticles with desired surface characteristics and compatible with aqueous environments. Here, we report the synthesis of monodispersed spherical CsPb2Br5@SiO2 core-shell nanoparticles by post-synthetic chemical transformation of 3D CsPbBr3 NCs in the presence of tetraethyl orthosilicate and a critical water/ammonia ratio. This method involves an ammoniamediated and ammonia-induced "top-down" transformation of as-synthesized 3D CsPbBr3 NCs to smaller CsPb2Br5 nanoclusters (ca. 2-3 nm), which trigger a seed-mediated silica growth, yielding monodispersed spherical blue luminescent (lambda(emission) = 432 nm) CsPb2Br5@SiO2 perovskite nanoparticles. By adjusting the reaction conditions, core-shell nanoparticles of a 36.1 +/- 4.5 nm diameter, which preserve their optical properties in water, were obtained. Besides that, the viability of the developed nanoparticles as a luminescent label for biosensing has been proven by specific biorecognition of the IgG protein in a direct immunoassay. Our work sheds light on the chemical processes and transformations involved in the silica nucleation mechanism in the presence of perovskite nanoparticles and opens the way for the future rational design of the next generation of semiconductor NC luminescent biological labels, This work was financially supported by the E.U FEDER projects BiHolog CTQ2016-75749-R and ADBIHOL (PID2019110713RB-I00) from MINECO and PROMETEO/2020/094 from Generalitat Valenciana. C.C. thanks the Spanish Ministry of Economy and Competitiveness for her predoctoral contract (FPI/17 Scholarship). V.G-P. thanks Universitat Polite`cnica de Vale`ncia for her postdoctoral fellowship (Grant-PAID-10-14) and for financial support from the project PAID/16/18 (VIITUPV)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

BIO bragg gratings on microfibers for label-free biosensing

  • Juste-Dolz, Augusto Miguel|||0000-0003-4889-6419
  • Avella-Oliver, Miquel|||0000-0002-7293-6989
  • Pastor Abellán, Daniel|||0000-0002-5297-3918
  • Maquieira, Angel|||0000-0003-4641-4957
  • Delgado-Pinar, Martina
  • Fernández-Sánchez, María Estrella
  • Andrés, Miguel V.
[EN] Discovering nanoscale phenomena to sense biorecognition events introduces new perspectives to exploit nano science and nanotechnology for bioanalytical purposes. Here we present Bio Bragg Gratings (BBGs), a novel biosensing approach that consists of diffractive structures of protein bioreceptors patterned on the surface of optical waveguides, and tailored to transduce the magnitude of biorecognition assays into the intensity of single peaks in the reflection spectrum. This work addresses the design, fabrication, and optimization of this system by both theoretical and experimental studies to explore the fundamental physicochemical parameters involved. Functional biomolecular gratings are fabricated by microcontact printing on the surface of tapered optical microfibers, and their structural features were characterized. The transduction principle is experimentally demonstrated, and its quantitative bioanalytical prospects are assessed in a representative immunoassay, based on patterned protein probes and selective IgG targets, in label-free conditions. This biosensing system involves appealing perspectives to avoid unwanted signal contributions from non-specific binding, herein investigated in human serum samples. The work also proves how the optical response of the system can be easily tuned, and it provides insights into the relevance of this feature to conceive multiplexed BBG systems capable to perform multiple label-free biorecognition assays in a single device., Spanish Ministry of Science and Innovation (CTQ2016-75749-R and TEC2016-80385-P), Agencia Estatal de Investigacion and Fondo Europeo de Desarrollo Regional (PID2019-110877 GB-I00 and PDI2019-104276RB-I00) and Generalitat Valenciana (PROMETEO/2019/048 and PROMETEO/2017/103). A.J.-D. acknowledges the FPI-UPV 2017 grant program, M.A.-O acknowledges the APSOSTD/2019 program of the GVA.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Consumer electronics devices for DNA genotyping based on loop-mediated isothermal amplification and array hybridisation

  • Tortajada-Genaro, Luis Antonio|||0000-0003-4021-5607
  • Maquieira, Angel|||0000-0003-4641-4957
  • Yamanaka, Eric Seiti
[EN] Consumer electronic technologies offer practical performances to develop compact biosensing systems intended for the point-of-care testing of DNA biomarkers. Herein a discrimination method for detecting single nucleotide polymorphisms, based on isothermal amplification and on-chip hybridisation, was developed and integrated into user-friendly optical devices: e.g., USB digital microscope, flatbed scanner, smartphone and DVD drive. In order to adequately identify a single base change, loop-mediated isothermal amplification (LAMP) was employed, with high yields (8 orders) within 45 min. Subsequently, products were directly hybridised to the allele-specific probes attached to plastic chips in an array format. After colorimetric staining, four consumer electronic techniques were compared. Sensitive precise measurements were taken (high signal-to-noise ratios, 10-mu m image resolution, 99% scan-to-scan reproducibility). These features confirmed their potential as analytical tools, are a competitive alternative to fluorescence scanners, and incorporate additional advantages, such as user-friendly interface and connectivity for telemedicine needs. The analytical performances of the integrated platform (assay and reader) in the human samples were also excellent, with a low detection limit (100 genomic DNA copies), and reproducible (< 15%) and cheap assays (< 10 (sic)/test). The correct genotyping of a genetic biomarker (single-nucleotide polymorphism located in the GRIK4 gene) was achieved as the assigned genotypes agreed with those determined by using sequencing. The portability, favourable discriminating and read-out capabilities reveal that the implementation of mass-produced low-cost devices into minimal-specialised clinical laboratories is closer to becoming a reality., The authors acknowledge the financial support received from the Generalitat Valenciana, Spain (GVA-PROMETEOII/2014/040 Project and GRISOLIA/2014/024 Ph.D. grant) and the Spanish Ministry of Economy and Competitiveness, Spain (MINECO CTQ2016-75749-R project) by U. E. FEDER funds. The authors also thank J. Carrascosa for supporting the DVD reader measurements.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Boosting the sensitivity of in vitro b-lactam allergy diagnostic tests

  • Peña-Mendizábal, Edurne
  • Morais, Sergi|||0000-0002-3722-2358
  • Maquieira, Angel|||0000-0003-4641-4957
[EN] The synthesis of structurally new haptens and the development of suitable antigens are essential for boosting the sensitivity of drug allergy diagnostic testing. Unprecedented structural antigens for benzylpenicillin and amoxicillin are characterised and evaluated in a cohort of 70 subjects with a turnkey solution based on consumer electronics., This work was funded by the H2020 program (project COBIOPHAD, grant agreement No. 688448), an initiative of the Photonics Public Private Partnership; Agencia Estatal de Investigacion (CTQ2016-75749-R, FEDER) and program UPV-La FE 2019 (PI05 VALBIOAL). E. P. M. holds a FPU doctoral fellowship from Ministerio de Educación, Cultura y Deporte.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Identification of high-affinity phage-displayed VH fragments by use of a quartz crystal microbalance with dissipation monitoring

  • Gómez-Arribas, Lidia N.
  • Peltomaa, Riikka
  • Giménez-Romero, David
  • Barderas, Rodrigo
  • Cuadrado, Carmen
  • Benito-Peña, Elena
  • Moreno-Bondi, María C.
  • Juste-Dolz, Augusto Miguel|||0000-0003-4889-6419
  • Morais, Sergi|||0000-0002-3722-2358
  • Maquieira, Angel|||0000-0003-4641-4957
[EN] Phage display has become a powerful tool for antibody discovery in a wide variety of fields. This technology allows specific binders for a given antigen to be selected from combinatorial libraries. A key step in the process is characterizing and evaluating antibody clones thus selected to reliably identify the best antigen binders. Novel characterization methods can provide essential insight into the binding mechanism and supplement the information obtained with conventional techniques. In this work, we used a quartz crystal microbalance with dissipation monitoring (QCM-D) to determine the kinetic and thermodynamic binding parameters for phagedisplayed VH antibody fragments. Phytohemagglutinin (PHA), a legume lectin of analytical interest, was used as a complex model antigen to select specific VH fragments from a phage-displayed library. Eight VH fragments with a unique amino acid sequence were identified as PHA binders by using the well-established enzyme-linked immunosorbent assay (ELISA). QCM-D measurements, structural analysis and principal component analysis (PCA) were used to evaluate the antibody fragments and identify clone clusters with similar binding characteristics and molecular interaction mechanisms. This unprecedented study has enabled the identification of highaffinity phage-displayed VH antibody fragments for PHA, which could be useful for PHA analysis (apparent association constant ranged from 108 to 1010 M-1). In fact, the proposed methodology provides a useful tool for evaluating and characterizing antibody fragments with capabilities beyond those of conventional techniques, This work was funded by the Spanish Ministry of Science and Innovation and the Spanish Ministry of Economy and Competitiveness (Projects RTI2018-096410-B-C21 and CTQ2016-75749-R, respectively), GVA's Prometeo program (Grant 2020/094) and the European Regional Development Fund (ERDF).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Novel and rapid activation of polyvinylidene fluoride membranes by UV light

  • Jimenez-Meneses, P.
  • Bañuls Polo, María-José|||0000-0002-2422-7731
  • Puchades, Rosa|||0000-0002-9329-1593
  • Maquieira, Angel|||0000-0003-4641-4957
[EN] Polyvinylidene fluoride (PVDF) membranes have become essential because of their huge applicability to the industry; however, they still present some limitations. This study focuses on the modification of PVDF membrane properties such as hydrophobicity, wettability, and functionality. To obtain a stable grafting, the surface of the membrane is hydroxylated using UV light at 254¿nm, followed by covalent immobilization of (3-aminopropyl)triethoxysilane (APTES) and vinyltriethoxysilane (VTES). The physicochemical and morphological properties of modified and raw PVDF membranes were analyzed by spectroscopy, microscopy, and goniometry. Finally, nucleic acid microarray technology results showed that PVDF and PVDF-VTES membranes had probe immobilization densities of 5 and 11¿pmol/cm2 and hybridization limits of detection of 1 and 5¿nM, respectively., Financial support from Spanish Ministry of Economy and Competitiveness (BIHOLOG Project CTQ2016-75749-R) and FEDER is acknowledged. P.J.-M. acknowledges the Spanish Ministry of Economy, Industry and Competitiveness for the public FPI grant (Project CTQ2013-45875-R) and cofinancing by the European Social Fund.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Modulating receptor-ligand binding in biorecognition by setting surface wettability

  • Aragón Revuelta, Pilar|||0000-0001-7815-9562
  • Noguera Murray, Patricia Silvestre|||0000-0001-7155-0710
  • Bañuls Polo, María-José|||0000-0002-2422-7731
  • Puchades, Rosa|||0000-0002-9329-1593
  • Maquieira, Angel|||0000-0003-4641-4957
  • González Martínez, Miguel Ángel|||0000-0002-5104-1262
[EN] Modulation of support wettability used for microarray format biosensing has led to an improvement of results. Hydrophobicity of glass chips was set by derivatizing with single vinyl organosilanes of different chain length and silane mixtures. Thiol-ene photochemical linking has been used as effective chemistry for covalent anchoring of thiolated probes. Lowest unspecific binding and highest signal intensity and SNR were obtained with large hydrocarbon chain (C-22) silanes or a shorter one (C-10) containing fluorine atoms. SNR resulting values are improved, reaching levels higher than 1500 in some cases, when using vinyl silanes modified with 1% C-10 alkyl fluorinated one, because mild hydrophobicity was achieved (water contact angle ca. 110 degrees) for all silanes, including the short C-2 and C-3, thus giving rise to smaller and better defined array spots. In addition, unspecific binding of reagents and targets was totally withdrawn. Hence, good-performing surfaces for biosensing applications can be built using appropriate organosilane reagent selection, including fluorinated ones., We thank Patricia Concepcion and Dolores Soriano (Instituto de Tecnologia Quimica, Universitat Politecnica de Valencia-Consejo Superior de Investigaciones Cientificas) for helping with XPS analysis. Financial support from the Generalitat Valenciana (GVA-PROMETEO/2014/040), FEDER, and the Spanish Ministry of Economy and Competitiveness (CTQ2013-45875-R and CTQ2016-75749-R) is acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Phosphorylcholine-based hydrogel for immobilization of biomolecules. Application to fluorometric microarrays for use in hybridization assays and immunoassays, and nanophotonic biosensing

  • Díaz-Betancor, Zeneida
  • Sanza, Francisco Javier
  • Casquel, Rafael
  • Laguna, María Fé
  • Holgado, Miguel
  • Bañuls Polo, María-José|||0000-0002-2422-7731
  • Puchades, Rosa|||0000-0002-9329-1593
  • Maquieira, Angel|||0000-0003-4641-4957
[EN] An approach is presented for covalent immobilization of biomolecules on an acrylate phosphorylcholine hydrogel. The immobilization and the hydrogel formation take place simultaneously by a thiol-acrylate coupling reaction, induced by UV-light (254nm). The hydrogel is prepared on two polymeric surfaces (the HardCoat protective layer of Blu-Ray discs, and SU-8) and applied to fluorescence microarray and label-free interferometric detection. For the first, Cy5 labeled analytes are used (lambda(em) 635nm) and, for the second, a periodic array of high-aspect ratio nanopillars detects unlabeled analytes by interferometry. Bioavailability of the immobilized probes is demonstrated in labeled assays; for the case of oligonucleotides by discriminating single nucleotide polymorphisms, and, for the case of antibodies, by BSA immunorecognition. The raw hydrogel is employed to detect human C-reactive protein, in both labeled and non-labeled assay formats, with sensitivities of 30ngmL(-1) and 2pgmL(-1), respectively., This research was funded by FEDER and the MINECO projects CTQ/2016/75749-R and TEC/2017/84846-R. The authors acknowledge the contribution of the Bc's D students Alejandra Vargas and Ismael Guerrero for the time spent at our lab and for their enthusiastic ideas on the possibilities of MPC hydrogel.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Fluor-thiol Photocoupling Reaction for Developing High Performance Nucleic Acid (NA) Microarrays

  • Jimenez-Meneses, P.
  • Bañuls Polo, María-José|||0000-0002-2422-7731
  • Puchades, Rosa|||0000-0002-9329-1593
  • Maquieira, Angel|||0000-0003-4641-4957
[EN] Spatially controlled anchoring of NA probes onto microscope glass slides by a novel fluor-thiol coupling reaction is performed. By this UV-initiated reaction, covalent immobilization in very short times (30 s at 254 nm) is achieved with probe densities of up to 39.6 pmol/cm(2). Modulating the surface hydrophobicity by combining a hydrophobic silane and a hydrophilic silane allows the fabrication of tuned surfaces where the analyte approaches only the anchored probe, which notably reduces nonspecific adsorption and the background. The generated substrates have proven clear advantages for discriminating single-base-pair mismatches, and for detecting bacterial PCR products. The hybridization sensitivity achieved by these high-performance surfaces is about 1.7 pM. Finally, this anchoring reaction is demonstrated using two additional surfaces: polytetrafluoroethylene (PTFE) and polyvinylidene fluoride (PVDF) membranes. This provides a very interesting pathway for anchoring thiolated biomolecules onto surfaces with C-F motifs via a quick clean UV reaction., Financial support from INTERBOINTER (project CTQ2013-45875-R) and BIHOLOG (Project CTQ2016-75749-R), FEDER, and GVA PROMETEO II 2014/040 is acknowledged. The authors also thank Dr. Tortajada-Genaro and Dr. Ninoles Rodenes for providing the Salmonella and Campylobacter PCR-amplified products. P.J.-M. acknowledges the Spanish Ministry of Economy, Industry and Competitiveness for the public FPI grant (Project CTQ2013-45875-R) and the cofinancing by, the European Social Fund. Dr. Miguel Angel Gonzalez-Martinez, Dr. Sergio Navalon, and Dr. Patricia Concepcion from Universitat Politecnica de Valencia are acknowledged for their help in the XPS analysis.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Enzyme Inhibition Microassays on Blu-Ray Disks for Drug Discovery

  • Sancho-Fornes, Gabriel
  • Peris Chanzá, Ernesto José
  • Giménez-Romero, David
  • Morais, Sergi|||0000-0002-3722-2358
  • Maquieira, Angel|||0000-0003-4641-4957
[EN] An enzyme inhibition-based assay for drug discovery developed by microarraing on Blu-ray disks is presented. As a proof-of-concept, the system screens a selected molecule library of potential chemical inhibitors against the glycoenzyme peroxidase, identifying the promising lead compounds with high selectivity using standard Blu-ray disks and drives. In order to face the first drug discovery stages, we establish the bases for a high-throughput screening assay and a methodology based on hypersurfaces suitable to manage a high number of data as well., This work was supported by the Spanish Ministry of Economy and Competitiveness and the European Region Development Fund under award reference: CTQ2016-75749-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Allele-specific ligation and recombinase polymerase amplification for the detection of single nucleotide polymorphisms

  • Lázaro-Zaragozá, Ana
  • Yamanaka, Eric-Seiti
  • Maquieira, Angel|||0000-0003-4641-4957
  • Tortajada-Genaro, Luis Antonio|||0000-0003-4021-5607
[EN] A novel multiplex detection of single nucleotide polymorphisms (SNPs), with point-of-care testing as its aim, is reported for supporting pharmacogenetic-based decisions. The strategy relies on allele-specific ligation to discriminate base sequence variations at the SNP site and the extension of generated products by isothermal amplification and recombinase polymerase amplification (RPA). Having demonstrated the assay principle, the variables for the adequate integration of the ligation-amplification process were studied and compared to a conventional PCR approach. One key result was the development of RPA in a universal format using short-length primers, which enabled detection based on selective hybridisation on a barcode-DNA chip and a low-cost optical sensor. As proof of concept, we successfully discriminated genetic variants related to cardiovascular diseases and the adequate prescription of oral anticoagulant antagonists of vitamin K (genes CYP2C9 and VKROC1)., The authors acknowledge the financial support received from the Generalitat Valenciana (GRISOLIA/2014/024PhD Grant and GVA-FPI-2017PhD Grant) and the Spanish Ministry of Economy and Competitiveness (MINECO Project CTQ2016-75749-R).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Nanoparticle Bragg reflectors: A smart analytical tool for biosensing

  • González-Pedro, Victoria|||0000-0002-8133-5958
  • Maquieira, Angel|||0000-0003-4641-4957
  • Calvo, Mauricio E.
  • Míguez, Hernán
[EN] In this work, we present a novel optical biosensor based on periodically alternated layers of SiO2 and TiO2 nanoparticles grown by wet methods and working as a Bragg mirror in a label free format. The sensing principle relies on the change of the optical response generated by variations in the dielectric constant of the voids due to a biorecognition probe-target event. This change is reflected in a modification in the photonic band gap frequencies of the Bragg reflector. As a proof of concept, biotin and streptavidin biorecognition on the biosensor surface is monitored in label free format, achieving a LOD of 3.09 mg L¿1 (54 nM) for the determination of streptavidin. Our proposed biosensor also shows selective determination against a variety of targets (horseradish peroxidase and bovine serum albumin antibody) working in physiological conditions (diluted human serum). To get a picture of the potential of our development and its ease of integration, we incorporated the immunosensor in an electronic consumable technology, such as compact disk, using the optical disk as analytical platform and a CD player detector for the determination of streptavidin. Thus, our findings point out the feasibility of nanoparticle based Bragg reflectors in the biosensing field and open new avenues towards the rational design of a new generation of versatile, easy to fabricate in mass scale and cost-competitive biosensors., This work was financially supported by the Spanish Ministry of Economy and Competitiveness projects CTQ2016-75749-R and CTQ2013-45875-R. V.G-P. thanks Universitat Politècnica de València for her postdoctoral fellowship (Grant-PAID-10-14).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Enhanced asymmetric blocked qPCR method for affordable detection of point mutations in KRAS oncogene

  • Lázaro-Zaragozá, Ana
  • Tortajada-Genaro, Luis Antonio|||0000-0003-4021-5607
  • Maquieira, Angel|||0000-0003-4641-4957
[EN] An accurate genetic diagnostic is key for adequate patient management and the suitability of healthcare systems. The scientific challenge lies in developing methods to discriminate those patients with certain genetic variations present in tumor cells at low concentrations. We report a method called enhanced asymmetric blocked qPCR (EAB-qPCR) that promotes the blocker annealing against the primer-template hybrid controlling thermal cycling and reaction conditions with nonmodified oligonucleotides. Real-time fluorescent amplification curves of wild-type alleles were delayed by about eight cycles for EAB-qPCR, compared to conventional blocked qPCR approaches. This method reduced the amplification of native DNA variants (blocking percentage 99.7%) and enabled the effective enrichment of low-level DNA mutations. Excellent performance was estimated for the detection of mutated alleles in sensitivity (up to 0.5% mutant/total DNA) and reproducibility terms, with a relative standard deviation below 2.8%. The method was successfully applied to the mutational analysis of metastatic colorectal carcinoma from biopsied tissues. The determined single-nucleotide mutations in the KRAS oncogene (codon 12¿13) totally agreed with those obtained from next-generation sequencing. EAB-qPCR is an accurate cheap method and can be easily incorporated into daily routine to detect mutant alleles. Hence, these features are especially interesting to facilitate the diagnosis and prognosis of several clinical diseases., The authors acknowledge the financial support received from the Generalitat Valenciana (GVA-FPI-2017 PhD grant), the Spanish Ministry of Economy and Competitiveness (MINECO project CTQ2016-75749-R), and European Regional Development Fund (ERDF)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Label-free detection of C-Reactive protein using bioresponsive hydrogel-based surface relief diffraction gratings

  • Lucío, María Isabel|||0000-0001-7404-352X
  • Hernández-Montoto, Andy|||0000-0001-5623-9836
  • Bañuls Polo, María-José|||0000-0002-2422-7731
  • Maquieira, Angel|||0000-0003-4641-4957
  • Fernández-Sánchez, María Estrella
  • Alamri, Sabri
  • Kunze, Tim
[EN] Responsive hydrogel-based surface relief gratings have demonstrated great performances as transducers in optical sensing. However, novel and smart designs of hydrogels are needed for the appropriate detection of analytes and biomolecules since the existing materials are very limited to specific molecules. In this work, a biosensing system based on surface relief gratings made of bioresponsive hydrogels has been developed. In particular, the hydrogel contains phosphocholine moieties to specifically recognize C-Reactive protein (CRP). The CRP-Sensing hydrogel capacity to selectively detect CRP was fully demonstrated. Using Direct Laser Interference Patterning, micro-gratings were created on CRP-Sensing hydrogel substrates and applied for the label-free sensing of CRP using a simple laser-based homemade optical setup. Limits of detection (LOD) and quantification (LOQ) in human serum dilutions of 1.07 and 8.92 mg L-1, respectively, were reached. These results demonstrate that the biosensing system allows the selective label-free detection of CRP within concentration ranges around those related to risks of cardiovascular diseases and sepsis. Besides, amplification strategies have been carried out improving the sensitivity, widening the linear range, and reaching better LOD and LOQ (0.30 mg L-1 and 4.36 mg L-1). Finally, all the approaches were tested for the quantification of CRP in certified human serum with recoveries of around 100%., This work was financially supported by the E.U. FEDER, the Spanish Ministry of Economy and Competitiveness MINECO (BiHolog-CTQ2016- 75749-R and AdBiHol-PID2019-110713RB-I00) and Generalitat Valenciana (PROMETEO/2020/094). M. I. Lucío acknowledges MINECO for her Juan de la Cierva Formacion and Incorporacion grants (FJCI-2016-29593, IJC 2018-035355-I). The authors acknowledge the assistance and advice of the Electron Microscopy Service of the Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Biosensors for food allergy detection according to specific IgE levels in serum

  • Morais, Sergi|||0000-0002-3722-2358
  • Tortajada-Genaro, Luis Antonio|||0000-0003-4021-5607
  • Maquieira, Angel|||0000-0003-4641-4957
  • González Martínez, Miguel Ángel|||0000-0002-5104-1262
[EN] People respond differently to food components, which can sometimes cause dramatic and unpredictable effects, such as intolerance, toxicity and allergy, and are a major global problem today. Of all the different reactions induced by food allergens, the most frequent are hypersensitivity mediated by specific immunoglobulins E (IgE). The in vitro biosensing of specific IgE levels is an alternative approach to invasive risky in vivo tests for diagnosing food allergy in humans. This work reviews the current analytical approaches in food-specific IgE biosensing, including immunochemical and lateral flow assays, electrochemical biosensors, array technologies, nanomaterial-based techniques, label-free sensors and microfluidic systems. The aim is to draw a closer more stimulating scenario for innovation in the food allergies topic. Perspectives on the future of biosensor technology applied to in vitro IgE determinations are also offered from an analytical viewpoint., We thank the Spanish Ministry of Economy and Competitiveness (CTQ2016-75749-R), FEDER and the European Union's Horizon 2020 research and innovation programme for funding Grant No. 688448 (Compact biophotonics platform for drug allergy diagnosis), which is an initiative of the Photonics Public Private Partnership.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Thiol-click photochemistry for surface functionalization applied to optical biosensing

  • Bañuls Polo, María-José|||0000-0002-2422-7731
  • González Martínez, Miguel Ángel|||0000-0002-5104-1262
  • García-Rupérez, Jaime|||0000-0002-2036-0084
  • Maquieira, Angel|||0000-0003-4641-4957
  • Sabek, Jad
[EN] In the field of biosensing, suitable procedures for efficient probes immobilization are of outmost importance. Here we present different light-based strategies to promote the covalent attachment of thiolated capture probes (oligonucleotides and proteins) on different materials and working formats. One strategy employs epoxylated surfaces and uses the light to accomplish the ring opening by a thiol moiety present in a probe. However, most of this work lies on the use of thiol-ene photocoupling chemistry to covalently attach probes to the supports. And thus, both alkenyl and thiol derivatized surfaces are assayed to immobilize thiol or alkene ended probes, respectively, and their performances are compared. Also, the effect of the number of thiols carried by the probe is analyzed comparing single-point and multi-point attachment. The performance of the analogous tethering, but onto alkynylated surfaces is also carried out, and the sensing response is related to the surfaces hydrophobicity. A newly developed reaction is also discussed where a fluorinated surface undergoes the covalent immobilization of thiolated probes activated by light, creating small hydrophilic areas where the probes are attached, and leaving the rest of the surface highly hydrophobic and repellent against protein unspecific adsorption. These mixed surfaces confine the sample (aqueous) uniquely on the hydrophilic spots lowering the background signal and thus increasing the sensitivity. These probe immobilization approaches are applied to fluorescence microarray and label-free nanophotonic biosensing. All the exposed reactions have in common the photoactivation of the thiol moieties, and give rise to quick, clean, versatile, orthogonal and biocompatible reactions. Water is the only solvent used, and light the only catalyzer applied. Thus, all of them can be considered as having the attributes of click-chemistry reactions. For these reasons we named them as thiol-click photochemistry, being a very interesting pool of possibilities when building a biosensor., This work was supported by the European Union program Horizon 2020, projects H2020-PHC-634013 and H2020-ICT-644242, and by the Spanish Ministry of Economy and Competitiveness, project CTQ2016-75749-R. Authors thank the whole "Signal and Measurement" research group, from the IDM, UPV, for sharing space, research and life. Special thanks to Pilar Jimenez-Meneses, Rafael Alonso, Daniel Gonzalez-Lucas, Pilar Aragon and Patricia Noguera for their contribution to the development of thiol photoattaching chemistry and surface wettability modulation.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Interferometric multilayered nanomaterials for imaging unlabeled biorecognition events

  • Sancho-Fornes, Gabriel
  • Avella-Oliver, Miquel|||0000-0002-7293-6989
  • Carrascosa Rubio, Javier|||0009-0003-4615-5278
  • Puchades, Rosa|||0000-0002-9329-1593
  • Maquieira, Angel|||0000-0003-4641-4957
[EN] There is an intense scientific activity on nanomaterials for biosensing, supported by their great potential to conceive powerful applications in chemistry, biology, and medicine. In addition to meet the required analytical parameters, the social impact of these advances is also highly influenced by cost, simplicity, and portability aspects, which are critical in label-free systems. This paper addresses the design, development, and experimental assessment of multilayered nanomaterials to transduce unlabeled biorecognition assays as both constructive and destructive interferences, by means of simple and effective imaging setups. The materials rely on superposed nanometric films of metals (gold and Ag-In-Sb-Te alloy) and a dielectric (zinc sulphide) deposited on a polymeric substrate. They are tailored to display maximal (constructive and destructive) interferences for immunoassays performed on their surface, and then fabricated by sputtering and characterized by focused ion beam scanning electron microscopy. Herein we also address the development of a simple optical setup that exploits standard DVD laser units to scan by imaging the reflected interferometric response of microarrayed immunoassays. The bioanalytical performance of the approach is experimentally assessed using a representative model immunoassay (BSA/anti-BSA) and a competitive immunoassay to quantify a low molecular weight drug (sulfasalazine), reaching detection limits of 460 and 11 ng mL(-1) of unlabeled targets, respectively. This study also explores two alternative one-shot interferometric imaging approaches that provide insights into simpler and faster strategies for label-free biosensing., This research was supported by FEDER and the Spanish Ministry of Economy and Competitiveness (CTQ2016-75749-R). The authors thank Angel Lopez Munoz for the construction of the automatized positioning stage.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Digitized microimmunoassays with nuclear antigens for multiplexquantification of human specific IgE to B-lactam antibiotics

  • Juárez-Rodríguez, María José
  • Morais, Sergi|||0000-0002-3722-2358
  • Maquieira, Angel|||0000-0003-4641-4957
[EN] Microanalytical systems have huge potential for prognosis and diagnosis of diseases where the quantification of biomarkers is the critical factor. Immunoglobulin E (IgE)-associated allergy is the most common immune disorder and reliable multiplex quantification of specific IgE antibodies is of key importance for in vitro allergy diagnosis. Here, we report an unprecedented highly sensitive multiplex colorimetric microanalytical system for reliable quantification of ß-lactam-specific IgE. The biosensor microsystem includes a regular digital versatile surface where nuclear antigens are immobilized in microarray format to determine simultaneously specific IgEs to amoxicillin, penicillin G, piperacillin and aztreonam, using a hacked disc drive as the optoelectrical sensor. The analytical microsystem was successfully tested in a cohort of 101 human serum samples, showing a limit of detection of 0.06 IU/mL (144¿pg IgE/mL), a clinical sensitivity of 42.3 % for amoxicillin, and an excellent specificity (100 %). The analytical performances were good as compared and validated with both in vivo and in vitro reference clinical immunofluorescence assay, settling a good correlation between the techniques. The compact microanalytical system can be easily implemented in primary care laboratory settings without the need for any additional instrumentation, facilitating massive drug allergy screening and delabeling campaigns to better define drug sensitization profiles., Maria Jose Juarez acknowledges financial support from Universitat Politecnica de Valencia through the research staff-training program (2017 FPI-UPV). This research has been funded by the H2020 program (project COBIOPHAD, grant agreement No. 688448), being an initiative of the Photonics Public Private Partnership (www.photonics21.org), Agencia Estatal de Investigacion (CTQ2016-75749-R, FEDER) and programme UPV-LA FE 2019 (PI05 VALBIOAL)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Neo-antigens for the serological diagnosis of IgE-mediated drug allergic reactions to antibiotics cephalosporin, carbapenem and monobactam

  • Peña-Mendizábal, Edurne
  • Morais, Sergi|||0000-0002-3722-2358
  • Maquieira, Angel|||0000-0003-4641-4957
[EN] New antigens deriving from -lloyl and -llanyl, major and minor determinants, respectively, were produced for beta-lactam antibiotics cefuroxime, cefotaxime, ceftriaxone, meropenem and aztreonam. Twenty beta-lactam antigens were produced using human serum albumin and histone H1 as carrier proteins. Antigens were tested by multiplex in vitro immunoassays and evaluated based on the detection of specific IgG and IgE in the serum samples. Both major and minor determinants were appropriate antigens for detecting specific anti-beta-lactam IgG in immunised rabbit sera. In a cohort of 37 allergic patients, we observed that only the minor determinants (-llanyl antigens) were suitable for determining specific anti-beta-lactam IgE antibodies with high sensitivity (<0.01 IU/mL; 24 ng/L) and specificity (100%). These findings reveal that not only the haptenisation of beta-lactam antibiotics renders improved molecular recognition events when the 4-member beta-lactam ring remains unmodified, but also may contribute to develop promising minor antigens suitable for detecting specific IgE-mediated allergic reactions. This will facilitate the development of sensitive and selective multiplexed in vitro tests for drug-allergy diagnoses to antibiotics cephalosporin, carbapenem and monobactam., This work has been funded by the H2020 programme (Project COBIOPHAD, grant agreement No. 688448), and is an initiative of the Photonics Public Private Partnership (www.photonics21.org); Agencia Estatal de Investigacion (CTQ2016-75749-R, FEDER) and programme UPV-LA FE 2019 (PI05 VALBIOAL). The authors acknowledge the Instituto de Investigacion Sanitaria La Fe, Valencia, Spain, which provided the samples from both allergic patients and controls. E.P.M acknowledges an FPU grant from the Ministerio de Educacion, Cultura y Deporte.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Experimental Study of the Oriented Immobilization of Antibodies on Photonic Sensing Structures by Using Protein A as an Intermediate Layer

  • Caroselli, Raffaele
  • Garcia Castello, Javier
  • Escorihuela Fuentes, Jorge
  • Bañuls Polo, María-José|||0000-0002-2422-7731
  • Maquieira, Angel|||0000-0003-4641-4957
  • García-Rupérez, Jaime|||0000-0002-2036-0084
[EN] A proper antibody immobilization on a biosensor is a crucial step in order to obtain a high sensitivity to be able to detect low target analyte concentrations. In this paper, we present an experimental study of the immobilization process of antibodies as bioreceptors on a photonic ring resonator sensor. A protein A intermediate layer was created on the sensor surface in order to obtain an oriented immobilization of the antibodies, which enhances the interaction with the target antigens to be detected. The anti-bovine serum albumin (antiBSA)-bovine serum albumin (BSA) pair was used as a model for our study. An opto-fluidic setup was developed in order to flow the different reagents and, simultaneously, to monitor in real-time the spectral response of the photonic sensing structure. The antiBSA immobilization and the BSA detection, their repeatability, and specificity were studied in different conditions of the sensor surface. Finally, an experimental limit of detection for BSA recognition of only 1 ng/mL was obtained, Funding from Spanish government through grants TEC2015-63838-C3-1-R (MINECO/FEDER, UE), TEC2013-49987-EXP BIOGATE, and CTQ/2016/75749-R, and from the European Commission through project H2020-644242-SAPHELY is acknowledged. Raffaele Caroselli also acknowledges the Generalitat Valenciana for funding his grant through the doctoral scholarship GRISOLIAP/2014/109.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Fluor-thiol Photocoupling Reaction for Developing High Performance Nucleic Acid (NA) Microarrays

  • Jiménez-Meneses, Pilar
  • Bañuls, María-José
  • Puchades, Rosa
  • Maquieira, Ángel
  • Jiménez-Meneses, Pilar|||/items/2b34cdd3-cfc8-46f2-96a1-0d1a639cfdeb
Spatially controlled anchoring of NA probes onto microscope glass slides by a novel fluor-thiol coupling reaction is performed. By this UV-initiated reaction, covalent immobilization in very short times (30 s at 254 nm) is achieved with probe densities of up to 39.6 pmol/cm2. Modulating the surface hydrophobicity by combining a hydrophobic silane and a hydrophilic silane allows the fabrication of tuned surfaces where the analyte approaches only the anchored probe, which notably reduces nonspecific adsorption and the background. The generated substrates have proven clear advantages for discriminating single-base-pair mismatches, and for detecting bacterial PCR products. The hybridization sensitivity achieved by these high-performance surfaces is about 1.7 pM. Finally, this anchoring reaction is demonstrated using two additional surfaces: polytetrafluoroethylene (PTFE) and polyvinylidene fluoride (PVDF) membranes. This provides a very interesting pathway for anchoring thiolated biomolecules onto surfaces with C–F motifs via a quick clean UV reaction.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nanoparticle Bragg reflectors: A smart analytical tool for biosensing

  • González-Pero, Victoria
  • Calvo, Mauricio E.
  • Míguez, Hernán
  • Maqueira, Ángel
In this work, we present a novel optical biosensor based on periodically alternated layers of SiO2 and TiO2 nanoparticles grown by wet methods and working as a Bragg mirror in a label free format. The sensing principle relies on the change of the optical response generated by variations in the dielectric constant of the voids due to a biorecognition probe-target event. This change is reflected in a modification in the photonic band gap frequencies of the Bragg reflector. As a proof of concept, biotin and streptavidin biorecognition on the biosensor surface is monitored in label free format, achieving a LOD of 3.09 mg L−1 (54 nM) for the determination of streptavidin. Our proposed biosensor also shows selective determination against a variety of targets (horseradish peroxidase and bovine serum albumin antibody) working in physiological conditions (diluted human serum). To get a picture of the potential of our development and its ease of integration, we incorporated the immunosensor in an electronic consumable technology, such as compact disk, using the optical disk as analytical platform and a CD player detector for the determination of streptavidin. Thus, our findings point out the feasibility of nanoparticle based Bragg reflectors in the biosensing field and open new avenues towards the rational design of a new generation of versatile, easy to fabricate in mass scale and cost-competitive biosensors., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Identification of high-affinity phage-displayed V<inf>H</inf> fragments by use of a quartz crystal microbalance with dissipation monitoring

  • Gómez-Arribas, Lidia N.
  • Juste-Dolz, Augusto
  • Peltomaa, Riikka
  • Giménez-Romero, David
  • Morais, Sergi
  • Barderas, Rodrigo
  • Cuadrado Hoyos, María Carmen
  • Maquieira, Ángel
  • Benito-Peña, Elena
  • Moreno-Bondi, María C.
10 Pág. Departamento de Tecnología de Alimentos​​, Phage display has become a powerful tool for antibody discovery in a wide variety of fields. This technology allows specific binders for a given antigen to be selected from combinatorial libraries. A key step in the process is characterizing and evaluating antibody clones thus selected to reliably identify the best antigen binders. Novel characterization methods can provide essential insight into the binding mechanism and supplement the information obtained with conventional techniques. In this work, we used a quartz crystal microbalance with dissipation monitoring (QCM-D) to determine the kinetic and thermodynamic binding parameters for phage-displayed VH antibody fragments. Phytohemagglutinin (PHA), a legume lectin of analytical interest, was used as a complex model antigen to select specific VH fragments from a phage-displayed library. Eight VH fragments with a unique amino acid sequence were identified as PHA binders by using the well-established enzyme-linked immunosorbent assay (ELISA). QCM-D measurements, structural analysis and principal component analysis (PCA) were used to evaluate the antibody fragments and identify clone clusters with similar binding characteristics and molecular interaction mechanisms. This unprecedented study has enabled the identification of high-affinity phage-displayed VH antibody fragments for PHA, which could be useful for PHA analysis (apparent association constant ranged from 108 to 1010 M−1). In fact, the proposed methodology provides a useful tool for evaluating and characterizing antibody fragments with capabilities beyond those of conventional techniques., This work was funded by the Spanish Ministry of Science and Innovation and the Spanish Ministry of Economy and Competitiveness (Projects RTI2018-096410-B-C21 and CTQ2016-75749-R, respectively), GVA’s Prometeo program (Grant 2020/094) and the European Regional Development Fund (ERDF)., Peer reviewed