Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

A becoming China and the assisted maturity of the EU, Assessing the factors determining their energy metabolic patterns

  • Velasco-Fernández, Raúl|||0000-0002-5438-1158
  • Pérez-Sánchez, Laura|||0000-0002-6772-8456
  • Chen, Lei
  • Giampietro, Mario|||0000-0002-5569-7023
This paper presents a multiscale integrated analysis comparing changes in the energy metabolic pattern of China and the European Union between 2000 and 2016. The MuSIASEM method is used to explore and illustrate the entanglement over different factors, across dimensions and levels of analysis. Demographic factors observed at the level of the whole are linked to changes in the economic structure, the pattern of energy uses and the level of outsourcing (imports). When analyzing these issues for the selected case studies we found that: (i) due to their lower dependency ratio and higher workloads China presents now about 1260 h in paid work per capita, while the EU presents just 720; (ii) economic structure in China evolved rapidly moving almost 300 h per capita per year from agriculture to service, construction and industrial sectors, while it remained quite stable in the EU; (iii) the metabolic pattern of China changed dramatically by expanding its capital goods in all sectors (almost 4 times in agriculture and more than doubling in industry and services) while the EU just increased them around 10%. The quick industrialization of China (going from 20 to 60 MJ/h in paid work sector) required an extraordinary investment in the construction sector, which arrived to allocate almost 3 times more workforce and 5 times more cement per capita than the EU (already industrialized). The simultaneous reading of all these changes confirms known trends and identifies a few challenges. The apparent decoupling of economic growth from resource consumption in the EU economy is due to the outsourcing of industrial production (identified and quantified at the level of subsectors). The trajectory of economic development of China, still in the phase of industrialization, spells troubles in terms of future consumption of natural resources and pollution. The metabolic perspective used in the comparison enables to identify policy-relevant factors determining both temporary comparative advantages and dangerous locks-in. On the methodological side, the paper illustrates a few innovative features introduced in the MuSIASEM accounting framework improving the characterization of demographic and other societal aspects affecting the overall energy metabolic patterns of societies.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

The international division of labor and embodied working time in trade for the US, the EU and China

  • Pérez-Sánchez, Laura|||0000-0002-6772-8456
  • Velasco-Fernández, Raúl|||0000-0002-5438-1158
  • Giampietro, Mario|||0000-0002-5569-7023
In sustainability analysis, human time is a crucial and overlooked societal limit. Some core countries overcome their time budgets and preserve their socio-economic structures by using energy and importing working time embodied in products and services. This paper analyses the roles of the United States, the European Union, and China in the international division of labor using the Multi-Scale Integrated Analysis of Societal and Ecosystem Metabolism (MuSIASEM) framework. We calculated working time in production, consumption, and trade both in absolute and per capita terms, for the different economic subsectors in 2011. Energy Metabolic Rates (energy use per hour) and Economic Job Productivity (value-added per hour) complemented the analysis. Whereas the greatest share of the workforce in China was still in agriculture, the US and EU had it in the tertiary sectors by outsourcing large shares of agriculture, mining, and industry: they import about half of the labor time in their consumption. At the global level, the trade of embodied labor is a zero-sum game. This fact questions the long-term viability of the current pattern of development enjoyed by the EU and the US, as well as the possibility for emerging economies to complete a similar transition to a post-industrial economy.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Analyzing the energy performance of manufacturing across levels using the end-use matrix

  • Velasco-Fernández, Raúl|||0000-0002-5438-1158
  • Giampietro, Mario|||0000-0002-5569-7023
  • Bukkens, Sandra|||0000-0001-9171-3150
Within the context of the controversial use of the concept energy intensity to assess national energy performance, this paper proposes an innovative accounting framework: the energy end-use matrix. This tool integrates quantitative assessments of energy use of the various constituent compartments of socioeconomic systems. More specifically it identifies, moving across levels of analysis, what compartments (or sub-compartments) are using what type of energy carriers for what type of end-use. This analysis is integrated with an assessment of labor requirements and the associated flows of value added. The enduse matrix thus integrates in a coherent way quantitative assessments across different dimensions and hierarchical scales and facilitates the development of integrated sets of indicators. In this way it contributes to a multi-criteria characterization of national or sectoral energy performance. The tool is illustrated with an analysis of three EU countries: Bulgaria, Finland and Spain. Challenges to improving the usefulness of biophysical analysis of the efficiency of the industrial sector are identified and discussed. Increasing the discriminatory power of quantitative analysis through better data standardization by statistical offices is the major challenge.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Unraveling the complexity of the Jevons Paradox, the link between innovation, efficiency, and sustainability

  • Giampietro, Mario|||0000-0002-5569-7023
  • Mayumi, Kozo
The term "Jevons Paradox" flags the need to consider the different hierarchical scales at which a system under analysis changes its identity in response to an innovation. Accordingly, an analysis of the implications of the Jevons Paradox must abandon the realm of reductionism and deal with the complexity inherent in the issue of sustainability: when studying evolution and real change how can we define "what has to be sustained" in a system that continuously becomes something else? In an attempt to address this question this paper presents three theoretical concepts foreign to conventional scientific analysis: (i) complex adaptive systems-to address the peculiar characteristics of learning and self-producing systems; (ii) holons and holarchy-to explain the implications of the ambiguity found when observing the relation between functional and structural elements across different scales (steady-state vs. evolution); and (iii) Holling's adaptive cycle-to illustrate the existence of different phases in the evolutionary trajectory of a complex adaptive system interacting with its context in which either external or internal constraints can become limiting. These concepts are used to explain systemic drivers of the Jevons Paradox. Looking at society's thermodynamic foundations, sustainability is based on a dynamic balance of two contrasting principles regulating the evolution of complex adaptive systems: the minimum entropy production and the maximum energy flux. The co-existence of these two principles explains why in different situations innovation has to play a different role in the "sustainable development" of society: (i) when society is not subject to external biophysical constraints improvements in efficiency serve to increase the final consumption of society and expand its diversity of functions and structures; (ii) when the expansion of society is limited by external constraints improvements in efficiency should be used to avoid as much as possible the loss of the existing diversity. It is concluded that sustainability cannot be achieved by technological innovations alone, but requires a continuous process of institutional and behavioral adjustment.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Characterizing the metabolic pattern of urban systems using MuSIASEM: The case of Barcelona

  • Pérez-Sánchez, Laura|||0000-0002-6772-8456
  • Giampietro, Mario|||0000-0002-5569-7023
  • Velasco-Fernández, Raúl|||0000-0002-5438-1158
  • Ripa, Maddalena|||0000-0002-2720-0585
The extreme degree of openness of contemporary urban systems with regard to both economy and population creates a serious challenge for the study of urban energy metabolism. A novel tool based on Multi-Scale Integrated Analysis of Societal and Ecosystem Metabolism (MuSIASEM) is proposed to overcome these challenges. It consists of an end-use matrix, a coherent multi-level integrated characterization of the uses of different forms of energy carriers (electricity, heat, fuels) for the various tasks performed in the city, including private and public mobility, tourism, commercial and residential activities. The end-use matrix integrates quantitative data referring to different dimensions (i.e. energy, human activity, land use, value added) and hierarchical (economic sectors and functional elements at lower levels) and spatial scales (i.e. individual buildings, neighborhoods, and the city as a whole). The end-use matrix provides information on both extensive (flows) and intensive variables (flow/fund ratios or benchmarks). Benchmarks are important for policy-making and allow a meaningful comparison of energy performance across hierarchical levels within the urban system, and among different urban systems. The approach is illustrated for Barcelona, a global city characterized by an important service sector.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Transforming rooftops into productive urban spaces in the Mediterranean, an LCA comparison of agri-urban production and photovoltaic energy generation

  • Corcelli, F.|||0000-0002-7394-450X
  • Fiorentino, Gabriella|||0000-0002-4089-3822
  • Petit-Boix, Anna|||0000-0003-2048-2708
  • Rieradevall, Joan|||0000-0003-3360-6829
  • Gabarrell Durany, Xavier|||0000-0003-1730-4337
A key strategy towards sustainable urban development is designing cities for increased circular metabolism. The transformation of areas underused, such as urban rooftops, into productive spaces is being increasingly implemented as a result of associated multiple benefits. Rooftop greenhouses (RTGs) are an interesting option for exploiting urban rooftops with direct exposure to sunlight, reducing food miles and creating new agricultural spaces, while building-applied solar photovoltaic (BAPV) panels provide clean energy and reduce greenhouse gas emissions. However, a proper assessment of environmental costs and benefits related to both systems is vital for a successful implementation. By means of Life Cycle Assessment (LCA) method, modelled in the professional software SimaPro, this paper aims at comparing the environmental performance of different productive uses of rooftops under Mediterranean climatic conditions. The results showed that both systems are favourable and contribute to decreasing the environmental impacts thanks to the production of resources on-site. BAPV system shows the highest avoided burdens in comparison with RTG: for instance, the impacts generated by BAPV on climate change and fossil depletion categories, corresponding to - 430 kg CO₂ eq/m² and - 110 kg oil eq/m² respectively (versus - 22 kg CO₂ eq/m² and - 4.7 kg oil eq/m² in the RTG system), are around 20 times lower than RTG. Furthermore, a sensitivity analysis was performed through different scenarios, based on reductions or substitution of the most sensitive input flows, thus providing some useful tools for improved environmental performances. Attention to additional energy and material efficiency, in favour of the more environmentally sustainable choice, should remain a main point of investigation.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Power generation from slaughterhouse waste materials, an emergy accounting assessment

  • Santagata, Remo|||0000-0002-2542-2520
  • Viglia, Silvio|||0000-0002-4994-119X
  • Fiorentino, Gabriella|||0000-0002-4089-3822
  • Liu, Gengyuan|||0000-0002-3488-9536
  • Ripa, Maddalena|||0000-0002-2720-0585
The linear path "extraction-production-consumption-waste", imposed by humans to natural ecosystems, where all material flows are instead circular, has become unsustainable. Understanding the potential value of some of these "by-products", in order to exploit them effectively in a biorefinery perspective, may help overcoming resource shortages and decrease environmental impacts. This study investigates energy and resource restoration from animal by-products. The slaughterhouse waste undergoes a rendering process to separate residual meal and fat. The latter is combusted in a co-generation plant to produce electricity and heat. The process is carefully assessed using Emergy Accounting approach with the aim of evaluating benefits and environmental load of the process considering the advantages achieved compared with the demand for ecosystem services and natural capital depletion. Moreover, the case aims at exploring three different methodological assumptions referring to the upstream burdens carried by the waste management system, proposing a modified exergy-based allocation rule. The electricity generated shows performances in terms of Unit Emergy Values ranging between 2.7E+05 sej/J, 2.2E+06 sej/J and 3.1E+07 sej/J among the different cases investigated, comparable to power from fossil fuels and renewables sources, and it provides an environmentally sound alternative to conventional waste disposal.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Fallacies of energy efficiency indicators, recognizing the complexity of the metabolic pattern of the economy

  • Velasco-Fernández, Raúl|||0000-0002-5438-1158
  • Dunlop, Tessa|||0000-0002-2265-9880
  • Giampietro, Mario|||0000-0002-5569-7023
The strategy of energy efficiency to save energy is deceptively simple: the idea is to use less input for the highest amount of useful output. However, on a practical and conceptual level, efficiency is an ambiguous and problematic concept to implement. Of particular concern is the lack of contextual and qualitative information provided in energy efficiency measurements based on simple ratios. Oversimplification of efficiency measurements can have a detrimental effect on the choice of energy policies. Efficiency measurements are particularly problematic on a macroeconomic scale where a significant amount of meaningful information is lost through the aggregation of data into a simple ratio (economic energy intensity). First, practical examples are presented flagging conceptual problems with energy efficiency indicators, then an alternative accounting method-the end-use matrix-based on the concept of the metabolic pattern of social-ecological systems is illustrated to show the possibility of enriching efficiency indicators by adding qualitative and contextual information across multiple scales and dimensions. This method unpacks and structures salient energy input and output information in a meaningful and transparent way by generating a rich multi-level and multi-dimensional information space.