Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 11
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Municipal sewer networks as sources of nitrous oxide, methane and hydrogen sulphide emissions, a review and case studies

  • Eijo Rio, Elena
  • Petit-Boix, Anna|||0000-0003-2048-2708
  • Villalba, Gara|||0000-0001-6392-0902
  • Suárez Ojeda, María Eugenia|||0000-0003-2520-2701
  • Rieradevall, Joan|||0000-0003-3360-6829
  • Gabarrell Durany, Xavier|||0000-0003-1730-4337
  • Marín, Desirée
  • Amores, Maria José
  • Aldea, Xavier
Sewers are known as longitudinal reactors where gases such as methane, nitrous oxide and hydrogen sulphide can be produced. However, gaseous emissions have been mainly assessed in wastewater treatment plants (WWTP). This article presents a critical review of studies that quantify the generation of these gases in sewers and aims to identify the existing research gaps. Differences in sampling methods and site selection, as well as a limited number of studies, result in incoherent comparisons. To address some of these gaps, sampling campaigns were conducted in two Spanish cities. Results showed that wet wells were the most important sources of gases with concentrations up to 321 μg CH4 Lair-1 and 6.8 μg N2O Lair-1. Regarding emission factors, in the case of Calafell, the estimated annual emissions were 18.6 kg CH4 year-1 and 0.3 kg H2S year-1 in summer and 3.8 kg CH4 year-1 and 0.5 kg H2S year-1 in winter. About Betanzos, these values were 24.6 kg CH4 year-1 and 0.5 kg N2O year-1 in summer and 10 kg CH4 year-1 in winter. The summer campaign resulted in greater gas concentration than in the winter season for both cities, suggesting that temperature is a key parameter. We conclude that gas emissions from sewers are significant compared to those of WWTPs resulting in an important contribution to the carbon footprint. Further work needs to be done to assess the gas production along the entire sewer networks, which can result in very different emission factors depending on the sewer components.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Integrated structural analysis and life cycle assessment of equivalent trench-pipe systems for sewerage

  • Petit-Boix, Anna|||0000-0003-2048-2708
  • Gabarrell Durany, Xavier|||0000-0003-1730-4337
  • Rieradevall, Joan|||0000-0003-3360-6829
  • Josa Garcia-Tornel, Alejandro|||0000-0003-1180-7910
  • Roigé, Núria
  • Fuente Antequera, Albert de la|||0000-0002-8016-1677
  • Pujadas Álvarez, Pablo|||0000-0001-5634-7431
The demand for sanitation infrastructures is increasing due to a rise in the urban population. To meet the need for wastewater collection, the construction of sewer networks must comply with a series of technical parameters that indicate whether a solution is feasible or not. Considering that this construction implies a series of environmental impacts, this study coupled a structural analysis of one linear metre of sewer constructive solutions with their life cycle impacts. Different pipe materials (concrete, polyvinylchloride (PVC) and high-density polyethylene (HDPE)) were combined with different trench designs and their environmental performance was assessed using Life Cycle Assessment (LCA). These solutions complied with technical parameters consisting of traffic loads and pavement conditions, among others. Concrete pipes embedded in granular matter result in fewer environmental impacts, such as Global Warming Potential or Cumulative Energy Demand. Further, re-using the excavated soil results in up to 80 % of environmental savings with respect to extracting new materials. Concerning traffic loads and pavement conditions, failures in plastic pipes could be avoided if these are embedded in concrete. Moreover, the environmental impacts of this solution are similar to those resulting from the substitution of pipes that do not comply with the mechanical requirements of the construction site. Therefore, proper planning is needed to provide cities with sewers that are resilient to time and external loads and reduce the urban environmental impacts.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Urban rainwater runoff quantity and quality, a potential endogenous resource in cities?

  • Angrill Toledo, Sara
  • Petit-Boix, Anna|||0000-0003-2048-2708
  • Morales Pinzón, Tito|||0000-0003-3156-2252
  • Josa Garcia-Tornel, Alejandro|||0000-0003-1180-7910
  • Rieradevall, Joan|||0000-0003-3360-6829
  • Gabarrell Durany, Xavier|||0000-0003-1730-4337
Rainwater harvesting might help to achieve self-sufficiency, but it must comply with health standards. We studied the runoff quantity and quality harvested from seven urban surfaces in a university campus in Barcelona according to their use (pedestrian or motorized mobility) and materials (concrete, asphalt and slabs). An experimental rainwater harvesting system was used to collect the runoff resulting from a set of rainfall events. We estimated the runoff coefficient and initial abstraction of each surface and analyzed the physicochemical and microbiological properties, and hydrocarbon and metal content of the samples. Rainfall intensity, surface material and state of conservation were essential parameters. Because of low rainfall intensity and surface degradation, the runoff coefficient was variable, with a minimum of 0.41. Concrete had the best quality, whereas weathering and particulate matter deposition led to worse quality in asphalt areas. Physicochemical runoff quality was outstanding when compared to superficial and underground water. Microorganisms were identified in the samples (.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Environmental performance of rainwater harvesting strategies in Mediterranean buildings

  • Angrill Toledo, Sara
  • Segura-Castillo, Luis
  • Petit-Boix, Anna|||0000-0003-2048-2708
  • Rieradevall, Joan|||0000-0003-3360-6829
  • Gabarrell Durany, Xavier|||0000-0003-1730-4337
  • Josa Garcia-Tornel, Alejandro|||0000-0003-1180-7910
Purpose: The rapid urbanization and the constant expansion of urban areas during the last decades have locally led to increasing water shortage. Rainwater harvesting (RWH) systems have the potential to be an important contributor to urban water self-sufficiency. The goal of this study was to select an environmentally optimal RWH strategy in newly constructed residential buildings linked to rainwater demand for laundry under Mediterranean climatic conditions, without accounting for water from the mains. Methods: Different strategies were environmentally assessed for the design and use of RWH infrastructures in residential apartment blocks in Mediterranean climates. The harvested rainwater was used for laundry in all strategies. These strategies accounted for (i) tank location (i.e., tank distributed over the roof and underground tank), (ii) building height considering the number of stories (i.e., 6, 9, 12, and 15), and (iii) distribution strategy (i.e., shared laundry, supply to the nearest apartments, and distribution throughout the building). The RWH systems consisted of the catchment, storage, and distribution stages, and the structural and hydraulic calculations were based on Mediterranean conditions. The quantification of the environmental performance of each strategy (e.g., CO₂eq. emissions) was performed in accordance with the life cycle assessment methodology. Results and discussion: According to the environmental assessment, the tank location and distribution strategy chosen were the most important variables in the optimization of RWH systems. Roof tank strategies present fewer impacts than their underground tank equivalents because they enhance energy and material savings, and their reinforcement requirements can be accounted for within the safety factors of the building structure without the tank. Among roof tanks and depending on the height, a distribution strategy that concentrates demand in a laundry room was the preferable option, resulting in reductions from 25 to 54 % in most of the selected impact categories compared to distribution throughout the building. Conclusions: These results may set new urban planning standards for the design and construction of buildings from the perspective of sustainable water management. In this sense, a behavioral change regarding demand should be promoted in compact, dense urban settlements.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Are we preventing flood damage eco-efficiently?, An integrated method applied to post-disaster emergency actions

  • Petit-Boix, Anna|||0000-0003-2048-2708
  • Arahuetes, Ana
  • Josa Garcia-Tornel, Alejandro|||0000-0003-1180-7910
  • Rieradevall, Joan|||0000-0003-3360-6829
  • Gabarrell Durany, Xavier|||0000-0003-1730-4337
Flood damage results in economic and environmental losses in the society, but flood prevention also entails an initial investment in infrastructure. This study presents an integrated eco-efficiency approach for assessing flood prevention and avoided damage. We focused on ephemeral streams in the Maresme region (Catalonia, Spain), which is an urbanized area affected by damaging torrential events. Our goal was to determine the feasibility of post-disaster emergency actions implemented after a major event through an integrated hydrologic, environmental and economic approach. Life cycle assessment (LCA) and costing (LCC) were used to determine the eco-efficiency of these actions, and their net impact and payback were calculated by integrating avoided flood damage. Results showed that the actions effectively reduced damage generation when compared to the registered water flows and rainfall intensities. The eco-efficiency of the emergency actions resulted in 1.2 kg CO2 eq. per invested euro. When integrating the avoided damage into the initial investment, negative net impacts were obtained (e.g., - 5.2E + 05 € and - 2.9E + 04 kg CO2 eq. per event), which suggests that these interventions contributed with environmental and economic benefits to the society. The economic investment was recovered in two years, whereas the design could be improved to reduce their environmental footprint, which is recovered in 25 years. Our method and results highlight the effects of integrating the environmental and economic consequences of decisions at an urban scale and might help the administration and insurance companies in the design of prevention plans and climate change adaptation.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Floods and consequential life cycle assessment, integrating flood damage into the environmental assessment of stormwater Best Management Practices

  • Petit-Boix, Anna|||0000-0003-2048-2708
  • Sevigné Itoiz, Eva|||0000-0002-7356-4048
  • Rojas Gutierrez, Lorena A.
  • Barbassa, Ademir Paceli|||0000-0003-1689-4873
  • Josa Garcia-Tornel, Alejandro|||0000-0003-1180-7910
  • Rieradevall, Joan|||0000-0003-3360-6829
  • Gabarrell Durany, Xavier|||0000-0003-1730-4337
Stormwater management is essential to reducing the occurrence of flooding events in urban areas and to adapting to climate change. The construction of stormwater Best Management Practices (BMPs) entails a series of life cycle environmental impacts but also implies avoided burdens, such as replacing urban infrastructure after flooding. The aim of this paper is to integrate flood damage prevention into the life cycle assessment (LCA) of BMPs for quantifying their net environmental impact (NEI) and environmental payback (EP) from a consequential LCA standpoint. As a case study, the application of a filter, swale and infiltration trench (FST) in a Brazilian neighborhood was assessed considering a high-intensity rainfall event. The potential avoided impacts were related to cars and sidewalks that were not destroyed due to flooding. In terms of CO2eq. emissions, the environmental investment related to the FST was recovered when the destruction of one car or 84 m2 of sidewalk was prevented. The NEI of the FSTs resulted in significant impact reductions (up to 700%) with respect to not accounting for the avoided products. This approach can be implemented to any type of BMP, and more accurate estimations can be made with data for different events and different types of material damage.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Application of life cycle thinking towards sustainable cities, a review

  • Petit-Boix, Anna|||0000-0003-2048-2708
  • Llorach-Massana, Pere|||0000-0003-1162-8162
  • Sanjuan Delmas, David|||0000-0002-5238-2069
  • Sierra-Pérez, Jorge|||0000-0002-7660-3508
  • Vinyes Guix, Elisabet|||0000-0001-9277-2136
  • Gabarrell Durany, Xavier|||0000-0003-1730-4337
  • Rieradevall, Joan|||0000-0003-3360-6829
  • Sanyé Mengual, Esther|||0000-0002-2349-9807
Defining sustainable cities is not straightforward. The main issues involved in urban sustainability are buildings, energy, food, green areas and landscape, mobility, urban planning, water and waste; and their improvement is promoted through different strategies. However, a quantitative method, such as life cycle thinking (LCT), is essential to evaluating these strategies. This paper reviews LCT studies related to urban issues to identify the main research gaps in the evaluation of these improvement strategies. The review identifies the main sustainability strategies associated with each urban issue and compiles articles that deal with these strategies through LCT, including environmental life cycle assessment (LCA), life cycle costing (LCC), social LCA (S-LCA) and life cycle sustainability assessment (LCSA), as well as integrated analyses with combined tools. Water, waste and buildings are the urban issues that accounted for a larger amount of studies. In contrast, a limited number of papers assessed urban planning and energy (excluding energy in buildings). Strong interrelations among urban issues were identified, most of them including water. In terms of methods, 79% of the studies exclusively applied life cycle tools (i.e., LCA, LCC, S-LCA or LCSA). Within this group, the environmental dimension was the focus of 84% of the papers. Single environmental indicators (e.g., global warming) were common in 20% of the analyses, highlighting the need to integrate more impact categories to prevent trade-offs. In the field of social and sustainability assessment, there is a need for methodological advances that foster their application in urban areas. Further research should cover the thematic and methodological gaps identified in this paper, such as developing models that assess complex urban issues, generating comprehensive LCT studies and promoting multi-indicators. Life cycle tools might benefit from revising the methodology with stakeholders to optimize the understanding and communication of life cycle results for policy- and decision-making processes.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Addressing the life cycle of sewers in contrasting cities through an eco-Efficiency approach

  • Petit-Boix, Anna|||0000-0003-2048-2708
  • Arnal, Carla
  • Marín, Desirée
  • Josa Garcia-Tornel, Alejandro|||0000-0003-1180-7910
  • Gabarrell Durany, Xavier|||0000-0003-1730-4337
  • Rieradevall, Joan|||0000-0003-3360-6829
Evaluating the sustainability of the urban water cycle is not straightforward, although a variety of methods have been proposed. Given the lack of integrated data about sewers, we applied the eco-efficiency approach to two case studies located in Spain with contrasting climate, population, and urban and sewer configurations. Our goal was to determine critical variables and life cycle stages and provide results for decision making. We used life cycle assessment and life cycle costing to evaluate their environmental and economic impacts. Results showed that both cities have a similar profile, albeit their contrasting features, that is, operation and maintenance, was the main environmental issue (50% to 70% of the impacts) and pipe installation registered the greatest economic capital expenditure (70% to 75%) due to labor. The location of the wastewater treatment plant (WWTP) is an essential factor in our analysis mainly due to the topography effects (e.g., the annual pump energy was 13 times greater in Calafell). Using the eco-efficiency portfolio, we observed that sewers might be less eco-efficient than WWTPs and that we need to envision their design in the context of an integrated WWTP-sewer management to improve sewer performance. In terms of methodological approach, the bidimensional nature of eco-efficiency enables the benchmarking of product systems and might be more easily interpreted by the general public. However, there are still some constraints that should be addressed to improve communication, such as the selection of indicators discussed in the article.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Environmental effects of using different construction codes applied to reinforced concrete beam designs based on Model Code 2010 and Spanish Standard EHE-08

  • Almirall, Cristina
  • Petit-Boix, Anna|||0000-0003-2048-2708
  • Sanjuan Delmas, David|||0000-0002-5238-2069
  • Fuente Antequera, Albert de la|||0000-0002-8016-1677
  • Pujadas Álvarez, Pablo|||0000-0001-5634-7431
  • Josa Garcia-Tornel, Alejandro|||0000-0003-1180-7910
Assuming specific behavior models, the variety of design codes currently used for the design of concrete beams inevitably results in different solutions, ensuring service during the whole expected lifetime with a maximum functional quality and safety. However, from a sustainable design perspective, such differences may have remarkable environmental impacts. This paper analyses if the approach of the newest design code, i.e., the Model Code, leads to a reduction in resource consumption and greenhouse gas emissions (GHG) over the life-cycle of concrete beams. To do so, a comparative analysis of the environmental impact of concrete beams was carried out depending on the reference code used for its design (i.e., EHE-08 or Model Code). The results show that the reduction of reinforcing steel is a basic objective to minimize the life cycle environmental impacts of concrete beams. Every country may have its own design codes and, thus, the reinforcing steel use can vary for structures subjected to the same loads and with equivalent structural reliability. Hence, regulations play a key role in the sustainability of construction assets. Conclusions depend on the beam length (L) and height (h) and characteristic compressive strength (fck). For short beams (4 m), the greater the h, the greater the reinforcement difference between the two codes. With regard to beams of 8 m, these differences can lead to varying steel and GHG savings, e.g., up to 5.0% with MC-2010 (h = 0.6 m and fck ≤ 35 MPa), almost 40% with EHE - 08 (h = 1.0 m and 35 MPa < fck ≤ 50 MPa) and more than 30% with EHE-08 (h = 0.6 m and 35 MPa < fck ≤ 50 MPa). For long beams (L = 12.0 m), steel consumption is 0.3-19% lower when the beam is designed with EHE-08, and this difference decreases as fck increases.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Towards productive cities, environmental assessment of the food-energy-water nexus of the urban roof mosaic

  • Toboso-Chavero, Susana|||0000-0001-8475-5184
  • Nadal, Ana|||0000-0002-9919-5092
  • Petit-Boix, Anna|||0000-0003-2048-2708
  • Pons Valladares, Oriol|||0000-0003-1747-8150
  • Villalba, Gara|||0000-0001-6392-0902
  • Gabarrell Durany, Xavier|||0000-0003-1730-4337
  • Josa Garcia-Tornel, Alejandro|||0000-0003-1180-7910
  • Rieradevall, Joan|||0000-0003-3360-6829
Cities are rapidly growing and need to look for ways to optimize resource consumption. Metropolises are especially vulnerable in three main systems, often referred to as the FEW (i.e., food, energy, and water) nexus. In this context, urban rooftops are underutilized areas that might be used for the production of these resources. We developed the Roof Mosaic approach, which combines life cycle assessment with two rooftop guidelines, to analyze the technical feasibility and environmental implications of producing food and energy, and harvesting rainwater on rooftops through different combinations at different scales. To illustrate, we apply the Roof Mosaic approach to a densely populated neighborhood in a Mediterranean city. The building-scale results show that integrating rainwater harvesting and food production would avoid relatively insignificant emissions (13.9-18.6 kg CO₂ eq/inhabitant/year) in the use stage, but their construction would have low environmental impacts. In contrast, the application of energy systems (photovoltaic or solar thermal systems) combined with rainwater harvesting could potentially avoid higher CO₂ eq emissions (177-196 kg CO₂ eq/inhabitant/year) but generate higher environmental burdens in the construction phase. When applied at the neighborhood scale, the approach can be optimized to meet between 7% and 50% of FEW demands and avoid up to 157 tons CO₂ eq/year. This approach is a useful guide to optimize the FEW nexus providing a range of options for the exploitation of rooftops at the local scale, which can aid cities in becoming self-sufficient, optimizing resources, and reducing CO2 eq emissions.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Transforming rooftops into productive urban spaces in the Mediterranean, an LCA comparison of agri-urban production and photovoltaic energy generation

  • Corcelli, F.|||0000-0002-7394-450X
  • Fiorentino, Gabriella|||0000-0002-4089-3822
  • Petit-Boix, Anna|||0000-0003-2048-2708
  • Rieradevall, Joan|||0000-0003-3360-6829
  • Gabarrell Durany, Xavier|||0000-0003-1730-4337
A key strategy towards sustainable urban development is designing cities for increased circular metabolism. The transformation of areas underused, such as urban rooftops, into productive spaces is being increasingly implemented as a result of associated multiple benefits. Rooftop greenhouses (RTGs) are an interesting option for exploiting urban rooftops with direct exposure to sunlight, reducing food miles and creating new agricultural spaces, while building-applied solar photovoltaic (BAPV) panels provide clean energy and reduce greenhouse gas emissions. However, a proper assessment of environmental costs and benefits related to both systems is vital for a successful implementation. By means of Life Cycle Assessment (LCA) method, modelled in the professional software SimaPro, this paper aims at comparing the environmental performance of different productive uses of rooftops under Mediterranean climatic conditions. The results showed that both systems are favourable and contribute to decreasing the environmental impacts thanks to the production of resources on-site. BAPV system shows the highest avoided burdens in comparison with RTG: for instance, the impacts generated by BAPV on climate change and fossil depletion categories, corresponding to - 430 kg CO₂ eq/m² and - 110 kg oil eq/m² respectively (versus - 22 kg CO₂ eq/m² and - 4.7 kg oil eq/m² in the RTG system), are around 20 times lower than RTG. Furthermore, a sensitivity analysis was performed through different scenarios, based on reductions or substitution of the most sensitive input flows, thus providing some useful tools for improved environmental performances. Attention to additional energy and material efficiency, in favour of the more environmentally sustainable choice, should remain a main point of investigation.