Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Lithium salt additives and the influence of their counterion on the performances of light-emitting electrochemical cells

  • Bandiello, Enrico|||0000-0003-0956-3195
  • Sessolo, M.
  • Bolink, H. J.
[EN] In this work we study the effect of the addition of lithium salts to light-emitting electrochemical cells (LECs), and in particular the effect of the lithium counterion. We found that the chosen lithium salts can substantially improve the device turn-on time as well as the overall lifetime, with respect to reference LECs using the pure emitter. A correlation between the lithium counterion and the corresponding device performance is established, and efficient LECs with lifetimes approaching 2000 hours are presented., We acknowledge financial support from the European Union H2020 project INFORM (grant 675867), the Spanish Ministry of Economy and Competitiveness (MINECO) via the Unidad de Excelencia Maria de Maeztu MDM-2015-0538, MAT2014-55200 and PCIN-2015-255 and the Generalitat Valenciana (Prometeo/2012/053). M. S. and E. B. thank the MINECO for their post-doctoral (JdC) and pre-doctoral grants, respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Efficient vacuum deposited p-i-n and n-i-p perovskite solar cells employing doped charge transport layers

  • Momblona, Cristina
  • Gil-Escrig, Lidón
  • Hutter, Eline M.
  • Sessolo, Michele
  • Lederer, Kay
  • Blochwitz-Nimoth, Jan
  • Bolink, Henk J.
  • Bandiello, Enrico|||0000-0003-0956-3195
[EN] Methylammonium lead halide perovskites have emerged as high performance photovoltaic materials. Most of these solar cells are prepared via solution-processing and record efficiencies (>20%) have been obtained employing perovskites with mixed halides and organic cations on (mesoscopic) metal oxides. Here, we demonstrate fully vacuum deposited planar perovskite solar cells by depositing methylammonium lead iodide in between intrinsic and doped organic charge transport molecules. Two configurations, one inverted with respect to the other, p-i-n and n-i-p, are prepared and optimized leading to planar solar cells without hysteresis and very high efficiencies, 16.5% and 20%, respectively. It is the first time that a direct comparison between these two opposite device configurations has been reported. These fully vacuum deposited solar cells, employing doped organic charge transport layers, validate for the first time vacuum based processing as a real alternative for perovskite solar cell preparation., We are grateful to Jorge Ferrando for his assistance with the sample characterization. The Spanish Ministry of Economy and Competitiveness (MINECO) via the Unidad de Excelencia Maria de Maeztu MDM-2015-0538 and MAT2014-55200, PCIN-2015-255 and the Generalitat Valenciana (Prometeo/2016/135). C. M., E. B. and M. S. thank the MINECO for their pre- and postdoctoral (JdC) contracts.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High voltage vacuum-deposited CH3NH3PbI3-CH3NH3PbI3 tandem solar cells

  • Ávila, Jorge
  • Momblona, Cristina
  • Boix, Pablo
  • Sessolo, Michele
  • Anaya, Miguel
  • Lozano, Gabriel
  • Vandewal, Koen
  • Míguez, Hernán
  • Bolink, Henk J.
The recent success of perovskite solar cells is based on two solid pillars: the rapid progress of their power conversion efficiency and their flexibility in terms of optoelectrical properties and processing methods. That versatility makes these devices ideal candidates for multi-junction photovoltaics. We report an optically optimized double junction CH3NH3PbI3–CH3NH3PbI3 tandem solar cell where the matched short-circuit current is maximized while parasitic absorption is minimized. The use of an additive vacuum-deposition protocol allows us to reproduce calculated stack designs, which comprise several charge selective materials that ensure appropriate band alignment and charge recombination. This rationalized configuration yields an unprecedented open circuit voltage of 2.30 V. Furthermore, this tandem solar cell features efficiencies larger than 18%, higher than those of the individual sub-cells. Low photo-current values allow reducing the losses associated to the series resistance of transparent contacts, which opens the door to the realization of efficient large area modules., We acknowledge financial support from the European Union H2020 project INFORM (grant 675867), the Spanish Ministry of Economy and Competitiveness (MINECO) via the Unidad de Excelencia María de Maeztu MDM-2015-0538, MAT2017-88905-P, MAT2017-88821-R, MAT2017-88584-R, PCIN-2015-255 and PCIN-2017-014 and the Generalitat Valenciana (Prometeo/2016/135). M. S. and P. P. B. thank the MINECO for their post-doctoral RyC contracts. P. P. B. acknowledges the financial support from the Conselleria d’Educació, Investigació, Cultura i Esport Valenciana (SEJI2017/2017/012). J. A. thanks the Spanish Ministry of Education, Culture and Sport for his pre-doctoral grant. M. A. is grateful to “La Caixa” Foundation for its financial support.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Near-infrared and short-wavelength infrared photodiodes based on dye-perovskite composites

  • Lin, Qianqian
  • Wang, Zhiping
  • Young, Margaret
  • Patel, Jay B.
  • Milot, Rebecca L.
  • Martínez Maestro, Laura
  • Lunt, Richard R.
  • Snaith, Henry J.
  • Johnston, Michael B.
  • Herz, Laura M.
Organohalide perovskites have emerged as promising light-sensing materials because of their superior optoelectronic properties and low-cost processing methods. Recently, perovskite-based photodetectors have successfully been demonstrated as both broadband and narrowband varieties. However, the photodetection bandwidth in perovskite-based photodetectors has so far been limited to the near-infrared regime owing to the relatively wide band gap of hybrid organohalide perovskites. In particular, short-wavelength infrared photodiodes operating beyond 1 mu m have not yet been realized with organohalide perovskites. In this study, narrow band gap organic dyes are combined with hybrid perovskites to form composite films as active photoresponsive layers. Tuning the dye loading allows for optimization of the spectral response characteristics and excellent charge-carrier mobilities near 11 cm(2) V-1 s(-1), suggesting that these composites combine the light-absorbing properties or IR dyes with the outstanding charge-extraction characteristics of the perovskite. This study demonstrates the first perovskite photodiodes with deep near-infrared and short-wavelength infrared response that extends as far as 1.6 mu m. All devices are solution-processed and exhibit relatively high responsivity, low dark current, and fast response at room temperature, making this approach highly attractive for next-generation light-detection techniques.