Pasar al contenido principal

CELDAS SOLARES ESTABLES Y DE ALTA EFICIENCIA BASADAS EN PEROVSKITAS DE ESTAÑO

PCIN-2015-255

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos Programación Conjunta Internacional
Año convocatoria 2015
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Subdirección General de Proyectos Internacionales
Centro beneficiario UNIVERSITAT DE VALÈNCIA
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Lithium salt additives and the influence of their counterion on the performances of light-emitting electrochemical cells

  • Bandiello, Enrico|||0000-0003-0956-3195
  • Sessolo, M.
  • Bolink, H. J.
[EN] In this work we study the effect of the addition of lithium salts to light-emitting electrochemical cells (LECs), and in particular the effect of the lithium counterion. We found that the chosen lithium salts can substantially improve the device turn-on time as well as the overall lifetime, with respect to reference LECs using the pure emitter. A correlation between the lithium counterion and the corresponding device performance is established, and efficient LECs with lifetimes approaching 2000 hours are presented., We acknowledge financial support from the European Union H2020 project INFORM (grant 675867), the Spanish Ministry of Economy and Competitiveness (MINECO) via the Unidad de Excelencia Maria de Maeztu MDM-2015-0538, MAT2014-55200 and PCIN-2015-255 and the Generalitat Valenciana (Prometeo/2012/053). M. S. and E. B. thank the MINECO for their post-doctoral (JdC) and pre-doctoral grants, respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Efficient vacuum deposited p-i-n and n-i-p perovskite solar cells employing doped charge transport layers

  • Momblona, Cristina
  • Gil-Escrig, Lidón
  • Hutter, Eline M.
  • Sessolo, Michele
  • Lederer, Kay
  • Blochwitz-Nimoth, Jan
  • Bolink, Henk J.
  • Bandiello, Enrico|||0000-0003-0956-3195
[EN] Methylammonium lead halide perovskites have emerged as high performance photovoltaic materials. Most of these solar cells are prepared via solution-processing and record efficiencies (>20%) have been obtained employing perovskites with mixed halides and organic cations on (mesoscopic) metal oxides. Here, we demonstrate fully vacuum deposited planar perovskite solar cells by depositing methylammonium lead iodide in between intrinsic and doped organic charge transport molecules. Two configurations, one inverted with respect to the other, p-i-n and n-i-p, are prepared and optimized leading to planar solar cells without hysteresis and very high efficiencies, 16.5% and 20%, respectively. It is the first time that a direct comparison between these two opposite device configurations has been reported. These fully vacuum deposited solar cells, employing doped organic charge transport layers, validate for the first time vacuum based processing as a real alternative for perovskite solar cell preparation., We are grateful to Jorge Ferrando for his assistance with the sample characterization. The Spanish Ministry of Economy and Competitiveness (MINECO) via the Unidad de Excelencia Maria de Maeztu MDM-2015-0538 and MAT2014-55200, PCIN-2015-255 and the Generalitat Valenciana (Prometeo/2016/135). C. M., E. B. and M. S. thank the MINECO for their pre- and postdoctoral (JdC) contracts.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Use of Hydrogen Molybdenum Bronze in Vacuum-Deposited Perovskite Solar Cells

  • Zanoni, Kassio P. S.
  • Pérez-del-Rey, Daniel
  • Dreessen, Chris
  • Camargo, Andrea
  • Sessolo, Michele
  • Bolink, H.J.
  • Hernández Fenollosa, María De Los Ángeles|||0000-0001-8003-3651
  • Boix, Pablo P.|||0000-0001-9518-7549
[EN] Herein, the dehydration of a hydrogen molybdenum bronze (HYMoO3),converting it to molybdenum oxide (MoOX), is explored toward the developmentof perovskite solar cells (PSCs) for the ¿rst time. H0.11MoO3bronze is synthe-sized, characterized, and deposited on indium tin oxide (ITO) under differentconcentrations and annealing conditions for in situ conversion into MoOXwithappropriate oxygen vacancies. Vacuum-deposited PSCs are fabricated using theas-produced MoOXhole injection layers, achieving a power conversion ef¿ciencyof 17.3% (average) for the optimal device. The latter has its stability andreproducibility tested, proving the robustness and affordability of the developedhole transport layer in PSCs, Financial support is acknowledged from the Spanish Ministry of Economy and Competitiveness (MINECO) via the Unidad de Excelencia Maria de Maeztu MDM-2015-0538, MAT2017-88821-R, PCIN-2015-255, PCIN-2017-014, and the Generalitat Valenciana (PROMETEO/2016/135). K.P.S.Z. and A.S.S.C. acknowledge the financial support from Fundacao de Amparo a Pesquisa do Estado de Sao Paulo Paulo FAPESP for financing CeRTEV-Center of Research, Technology and Education on Vitreous Materials (2013/07793-6) and a postdoctoral scholarship (2018/05152-7). P.B. and M.S. thank the MINECO for their RyC contracts. P.B. acknowledges the financial support from the Conselleria d'Educacio, Investigacio, Cultura i Esport Valenciana (SEJI2017/2017/012). Special thanks to Dr. Fernando C. Pascual for performing the XPS measurements.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High voltage vacuum-deposited CH3NH3PbI3-CH3NH3PbI3 tandem solar cells

  • Ávila, Jorge
  • Momblona, Cristina
  • Boix, Pablo
  • Sessolo, Michele
  • Anaya, Miguel
  • Lozano, Gabriel
  • Vandewal, Koen
  • Míguez, Hernán
  • Bolink, Henk J.
The recent success of perovskite solar cells is based on two solid pillars: the rapid progress of their power conversion efficiency and their flexibility in terms of optoelectrical properties and processing methods. That versatility makes these devices ideal candidates for multi-junction photovoltaics. We report an optically optimized double junction CH3NH3PbI3–CH3NH3PbI3 tandem solar cell where the matched short-circuit current is maximized while parasitic absorption is minimized. The use of an additive vacuum-deposition protocol allows us to reproduce calculated stack designs, which comprise several charge selective materials that ensure appropriate band alignment and charge recombination. This rationalized configuration yields an unprecedented open circuit voltage of 2.30 V. Furthermore, this tandem solar cell features efficiencies larger than 18%, higher than those of the individual sub-cells. Low photo-current values allow reducing the losses associated to the series resistance of transparent contacts, which opens the door to the realization of efficient large area modules., We acknowledge financial support from the European Union H2020 project INFORM (grant 675867), the Spanish Ministry of Economy and Competitiveness (MINECO) via the Unidad de Excelencia María de Maeztu MDM-2015-0538, MAT2017-88905-P, MAT2017-88821-R, MAT2017-88584-R, PCIN-2015-255 and PCIN-2017-014 and the Generalitat Valenciana (Prometeo/2016/135). M. S. and P. P. B. thank the MINECO for their post-doctoral RyC contracts. P. P. B. acknowledges the financial support from the Conselleria d’Educació, Investigació, Cultura i Esport Valenciana (SEJI2017/2017/012). J. A. thanks the Spanish Ministry of Education, Culture and Sport for his pre-doctoral grant. M. A. is grateful to “La Caixa” Foundation for its financial support.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Vacuum deposited perovskite solar cells employing dopant-free triazatruxene as the hole transport material

  • Calió, Laura
  • Momblona, Cristina
  • Gil Escrig, Lidon
  • Kazim, Samrana
  • Sessolo, Michele
  • Sastre Santos, Ángela
  • Bolink, Henk J.
  • Ahmad, Shahzada
Planar perovskite solar cells using organic charge selective contacts were fabricated. In a vacuum deposited perovskite-based solar cell, dopant and additive free triazatruxene as the hole transport layer was introduced for device fabrication. High open-circuit voltage of 1090 mV was obtained using methylammonium lead iodide (Eg=1.55 eV) as light harvesting material, thus representing a loss of only 460 mV which is in close vicinity of mature silicon technology (400 mV). The devices showed a very competitive photovoltaic performance, monochromatic incident photon-to-electron conversion efficiency of 80% and the power conversion efficiencies in excess of 15% were measured with a negligible degree of hysteresis., The work at Abengoa Research has received funding from the European Union Seventh Framework Programme under grant agreement n° 607232 [THINFACE]." This work was supported by the Spanish Ministry of Economy and Competitiveness (MINECO) via the Unidad de Excelencia María de Maeztu MDM-2015-0538 and MAT2014-55200, PCIN-2015-255 and the Generalitat Valenciana (Prometeo/2016/135). C. M. and M. S. thank the MINECO for their pre- and post-doctoral (JdC) contracts., Peer reviewed