Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Comparative Analysis of Data Acquisition Setups for Fast Timing in ToF-PET Applications

  • Latella, Riccardo|||0000-0002-5044-9557
  • Benlloch Baviera, Jose María|||0000-0001-6073-1436
  • Lecoq, Paul
  • Gonzalez, Antonio J.
  • Konstantinou, Georgios
[EN] The signal-to-noise ratio in positron emission tomography (PET) improves with precise timing resolution. PET systems enabling the capability of time-of-flight (ToF) are nowadays available. This study assesses various data configurations, comparing the obtained timing performances applicable to time-of-flight positron emission tomography (ToF-PET) systems. Different readout configurations were evaluated together with silicon photomultipliers (SiPMs) photosensors from the Fondazione Bruno Kessler (FBK), with and without the so-called metal trench (MT) technology. The tests were carried out with scintillation crystals of 3x3x5 mm(3) (LYSO:Ce,Ca) from SIPAT. Two onboard FPGA-based systems, namely, the Felix time-to-digital converter (TDC) from Tediel S.r.l. and the ASIC-based FastIC from the University of Barcelona, along with custom-made high-frequency electronics (CM-HF), were compared. Considering only photopeak events, the best-coincidence timing resolution (CTR) results obtained were 71 ps with the MT SiPMs. This result worsened to 88 ps with the old version of the same device that does not include the MT technology (called HD). The results demonstrate substantial CTR improvements when MT SiPMs were used across the different scenarios, resulting in a timing improvement in the 10 to 45-ps range compared to HD SiPMs. Notably, the Felix TDC achieved sub-100-ps timing results, emphasizing the potential of FPGA technology in ToF-PET applications. Moreover, the fully passive version of the CM-HF connected to the MT SiPMs shows only a degradation of 8-ps difference compared to the version using amplifiers. The novel MT-type SiPMs promise superior timing performance, enhancing accuracy and efficiency in PET imaging systems., This work was supported in part by the frame of the ERC Advanced Grant TICAL under Grant 338953 PI (P. Lecoq), and the related Prof-of-Concept Project ULTIMA under Grant 680552, both funded by the European Commission; and in part by the European Research Council (ERC) through the European Union's Horizon 2020 Research and Innovation Program under Grant 695536.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Exploiting Cherenkov Radiation With BGO-Based Metascintillators

  • Latella, Riccardo|||0000-0002-5044-9557
  • González Martínez, Antonio Javier
  • Kovylina-Zabyako, Miroslavna
  • Griol Barres, Amadeu
  • Benlloch Baviera, Jose María|||0000-0001-6073-1436
  • Lecoq, Paul
  • Bonifacio, Daniel A. B.
  • Konstantinou, Georgios
[EN] In time-of-flight positron emission tomography (TOF-PET), the timing capabilities of the scintillation-based detector play an important role. An approach for fast timing is using the so-called metascintillators, which combine two materials leading to the synergistic blending of their favorable characteristics. An added effect for BGO-based metascintillators is taking advantage of better transportation of Cherenkov photons through UV-transparent materials such as plastic (type EJ232). To prove this, we use an optimized Coincidence Time Resolution (CTR) setup based on electronic boards with two output signals (timing and energy) and near-ultraviolet (NUV) and vacuum-ultraviolet (VUV) silicon photomultipliers (SiPMs) from Fondazione Bruno Kessler (FBK), along with different coupling materials. As a reference detector, we employed a 3x3x5-mm(3) LYSO:Ce,Ca crystal pixel coupled with optical grease to an NUV-HD SiPM. The evaluation is based on low-threshold rise time, energy and time of arrival of event datasets. Timing results of a BGO/EJ232 3x3x15-mm(3) metapixel show detector time resolutions (DTRs) of 159 ps for the full photopeak. We demonstrate the possibility of event discrimination using subsets with different DTR from the rise time distributions (RTDs). Finally, we present the synergistic capability of metascintillators to enhance Cherenkov photons detection when used along with VUV-sensitive SiPMs., This work was supported in part by the European Research Council (ERC) under the European Union's Horizon 2020 Research and Innovation Program (4D-PET) under Grant 695536, and in part by the Brazilian Funding Agency Conselho Nacional de Desenvolvimento Cientifico e Tecnologico (CNPq) under Grant 202378/2020-9.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Metascintillators: New Results for TOF-PET Applications

  • Lecoq, Paul
  • Latella, Riccardo|||0000-0002-5044-9557
  • Moliner Martínez, Laura
  • Barrio-Toala, John|||0000-0001-5181-2146
  • Benlloch Baviera, Jose María|||0000-0001-6073-1436
  • González Martínez, Antonio Javier
  • Konstantinou, Georgios
  • Nuyts, Johan
  • Zhang, Lei
[EN] We report on the progress on a first generation of realistic size metascintillators for time-of-flight PET. These heterostructures combine dense LYSO or BGO plates, interleaved with fast scintillator layers producing a bunch of prompt photons from the energy leakage of the recoil photoelectric electron. From a Geant4 simulation of the energy sharing distribution between the dense and the fast scintillator on 42 LYSO-based and 42 BGO-based configurations, a detailed study of the timing performance has been performed on a selection of the most promising 12 LYSO-based and 14 BGO-based metascintillators. A Monte Carlo simulation was first performed to extrapolate from direct measurements of the performance of the metascintillator components, the detector time resolution (DTR), and sensitivity on the basis of the simulated amount of energy leakage to the fast scintillator. An analytic algorithm was then applied to determine an equivalent coincidence time resolution (CTR) from the random association of the DTR distributions from two metapixels in coincidence. This equivalent CTR is calculated in order to obtain the same variance in the reconstructed image as the combination of the DTR distributions of 2 metapixels. Preliminary results confirm that with these simple and still nonoptimized configurations, an equivalent CTR of 150 ps for BGO-based and 140 ps for LYSO-based metapixels of realistic size can be obtained, This work was supported in part by the European Research Council (ERC) through the European Union's Horizon 2020 Research and Innovation Programme under Grant 695536. The work of P. Lecoq was supported in part by ERC Advanced under Grant TICAL 338953, and in part by the related Proof-of-Concept Project under Grant ULTIMA 680552, both funded by the European Commission.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Design and Development of ToF-PET Detectors based on Metascintillators

  • Latella, Riccardo|||0000-0002-5044-9557
[ES] Esta tesis doctoral explora el desarrollo y la aplicación de nuevos materiales centelleadores adecuados para la Tomografía por Emisión de Positrones con Tiempo de Vuelo (ToF-PET), con el objetivo de mejorar la resolución temporal utilizando metacentelleadores. La información temporal mejora la relación señal-ruido de las imágenes clínicas, ofreciendo mayor contraste que permite detectar precozmente tumores de pequeño tamaño y baja densidad, además de investigar enfermedades neurodegenerativas. Los metacentelleadores son estructuras compuestas por múltiples capas de materiales centelleadores distintos, capaces de equilibrar una alta absorción de rayos gamma y tiempos de decaimiento breves, mejorando el rendimiento de los sistemas PET. Este trabajo revisa la física fundamental del PET, en particular las limitaciones de centelleadores como BGO, LYSO, BaF2 y EJ232. La introducción de metacentelleadores, que combinan materiales densos (BGO, LYSO) con emisores rápidos (EJ232, BaF2), permite la compartición energética entre materiales y mejora el sistema. Se probaron combinaciones como BGO/EJ232, LYSO:Ce/EJ232 y BGO/BaF¿. En el caso de BGO/EJ232, un metapíxel de 3×3×15 mm³ logró una resolución temporal del módulo (DTR) de 159 ps, equivalente a una CTR de 224 ps. Las distribuciones de tiempos de subida permitieron discriminar tipos de eventos, mostrando su potencial para mejorar la resolución. Además, estas combinaciones mejoraron la detección de fotones Cherenkov al acoplarse con SiPM sensibles al VUV. En los BGO/BaF2, un modelo optimizado de compartición energética logró una resolución del 22%, cercana al 18% del BGO puro. Una corrección de "time walk" aplicada a eventos compartidos mejoró el CTR de 319 ps a 242 ps, alcanzando 108 ps para el 13% de eventos más rápidos, comparable al de un cristal LYSO:Ce,Ca de 3×3×5 mm³. Para la validación experimental se usaron SiPM de última generación, incluyendo modelos con zanjas metálicas (MT), seleccionados por su alta eficiencia en UV y VUV. Usando electrónica avanzada con un canal dedicado a la temporización, se logró un CTR de 71 ps con cristales LYSO:Ce,Ca, 18 ps mejor que sin MT. Una versión pasiva del sistema electrónico mostró solo 8 ps de degradación respecto al mejor resultado con amplificación, mostrando el potencial de reducción de costes y consumo energético. Una parte clave de la tesis aborda las complejidades del procesamiento de señales en estructuras multimaterial. Aunque complica el acceso a la información energética y temporal, permite reconstrucción de eventos más refinada mediante el modelo de compartición energética. Esta interacción única entre capas permite una interpretación más precisa de la información gamma. Finalmente, se exploran futuras direcciones como el uso de nanocristales y nuevos materiales para mejorar aún más la resolución y la eficiencia. Combinando materiales innovadores, electrónica rápida y nuevas tecnologías de SiPM, los metacentelleadores ofrecen un camino prometedor para la próxima generación de sistemas PET con tiempo de vuelo., [CA] Aquesta tesi doctoral explora el desenrotllament i l'aplicació de nous materials centellejadors adequats per a la Tomografia per Emissió de Positrons amb temps de Vol (ToF-PET), amb l'objectiu de millorar la resolució temporal utilitzant metacentellejadors. La informació temporal millora la relació senyal-soroll de les imatges clíniques, oferint un major contrast que permet detectar precoçment tumors de xicoteta grandària i baixa densitat, a més d'investigar malalties neurodegeneratives. Els metacentellejadors són estructures compostes per múltiples capes de materials centellejadors distints, capaços d'equilibrar una alta absorció de raigs gamma i temps de decaïment ràpids, millorant el rendiment dels escàners PET. Este treball revisa la física fonamental del PET, en particular les limitacions dels centellejadors tradicionals com BGO, LYSO, BaF2 i EJ232. La introducció dels metacentellejadors, que combinen materials densos amb alta capacitat d'absorció (BGO, LYSO) i materials amb emissió ràpida de fotons (EJ232, BaF¿), permet la compartició d'energia entre materials i millora el sistema. Es van provar combinacions com BGO/EJ232, LYSO:Ce/EJ232 i BGO/BaF2. En el cas dels BGO/EJ232, un metapíxel de 3×3×15 mm³ va aconseguir una resolució temporal del detector (DTR) de 159 ps, corresponent a una CTR de 224 ps. Les distribucions dels temps de pujada es van utilitzar per a discriminar tipus d'esdeveniments, mostrant el potencial de millora. A més, aquestes combinacions van millorar la detecció de fotons Cherenkov quan es van acoblar a SiPM sensibles al VUV. En els BGO/BaF2, un model optimitzat de compartició d'energia va aconseguir una resolució del 22%, pròxima al 18% del BGO pur. Una correcció del "time walk" aplicada a esdeveniments compartits va millorar el CTR de 319 ps a 242 ps, aconseguint 108 ps per al 13% d'esdeveniments més ràpids, comparable al d'un cristall LYSO:Ce,Ca de 3×3×5 mm³. Per a la validació experimental es van emprar SiPM d'última generació, incloent models amb rases metàl·liques (MT), seleccionats per la seua alta eficiència en UV i VUV. Amb electrònica avançada i un canal dedicat a la temporització, es va aconseguir un CTR de 71 ps amb cristalls LYSO:Ce,Ca, 18 ps millor que els SiPM sense MT. Una versió passiva del mateix sistema va mostrar només 8 ps de degradació respecte al millor resultat amb amplificadors, demostrant el potencial de reducció de costos i consum energètic. Una part clau de la tesi aborda les complexitats del processament de senyals en estructures multimaterial. Encara que complica l'accés a la informació energètica i temporal, permet una reconstrucció més refinada mitjançant el model de compartició d'energia. Aquesta interacció única entre capes permet una interpretació més precisa de la informació gamma. Finalment, s'exploren possibles línies futures com l'ús de nanocristalls i nous materials per a millorar encara més la resolució i eficiència. Combinant materials innovadors, electrònica ràpida i noves tecnologies de SiPM, els metacentellejadors oferixen un camí prometedor per a la pròxima generació de sistemes PET amb temps de vol., [EN] This PhD thesis investigates the development and application of novel scintillation material suitable for Time-of-Flight Positron Emission Tomography (ToF-PET), aiming to improve the current state-of-the-art in timing resolution using metascintillators. The timing information enhances the signal-to-noise ratio of the clinical image, leading to better contrast, which allows physicians to detect small and low-uptake tumors earlier, as well as investigate neurodegenerative diseases, among others. We refer to metascintillators as structures made of multiple layers of distinct scintillating materials to balance high stopping power and fast decay times, playing an important role in PET scanner performance. This work starts by reviewing the fundamental physics of PET, particularly the limitations of traditional scintillators such as bismuth germanate (BGO), lutetium-yttrium oxyorthosilicate (LYSO), barium fluoride (BaF2), and plastic scintillators (such as EJ232). The introduction of metascintillators, which combine dense materials (BGO, LYSO) for high stopping power and fast photon emission ones (EJ232, BaF2), addresses these challenges by enabling energy sharing and improving overall system performance. Several different combinations of materials were tested, including BGO/EJ232, LYSO:Ce/EJ232, and BGO/BaF2. For BGO/EJ232 metascintillators, a 3×3×15 mm³ metapixel achieved a detector timing resolution (DTR) of 159 ps, corresponding to a coincidence timing resolution (CTR) of 224 ps. Rise time distributions were successfully used for event discrimination, showing the potential to further enhance timing resolution. Additionally, BGO/EJ232 combinations synergistically improved Cherenkov photon detection when paired with VUV-sensitive SiPMs. For BGO/BaF¿ metascintillators, the optimized energy-sharing model achieved an energy resolution of 22%, close to the 18% resolution of bulk BGO pixels under similar readout conditions. A time walk correction applied to energy-shared events significantly improved timing performance, starting from a CTR of 319 ps and achieving 242 ps, reaching 108 ps for a subset of 13% of the most shared and fast events, comparable to the CTR of a 3×3×5 mm³ LYSO:Ce,Ca reference crystal. The experimental validation used state-of-the-art SiPMs, including the latest generations with metal trenches (MT), selected for their high photon detection efficiency in vacuum-ultraviolet and near-ultraviolet wavelengths. Using advanced electronics with a dedicated timing channel, these devices achieved a CTR of 71 ps with 3×3×5 mm³ LYSO:Ce,Ca crystals, 18 ps better than former SiPMs without MT, confirming the superior timing performance of this technology. A fully passive version of the same system showed degradation of only 8 ps compared to the best amplified result, further underlining the potential to reduce frontend costs and power consumption. A key part of the thesis discusses the signal processing challenges presented by the multi-material structure of metascintillators. While this structure complicates access to energy and timing information, it enables refined event reconstruction by leveraging the energy-sharing model. This unique photon interaction across the layers allows a more accurate and efficient interpretation of gamma-ray information. Finally, the thesis explores future directions for metascintillator development, including the potential for nanocrystal scintillators and other advanced materials to further push the limits of timing resolution and photon detection efficiency. By combining innovative materials, high-frequency electronics, and new SiPM technologies, metascintillators offer a promising path for the next generation of ToF-PET systems. In summary, this thesis demonstrates that metascintillators, with their multi-material structure and enhanced timing capabilities, significantly improve PET detector performance, addressing traditional trade-offs between sensitivity and timing, and enabling more, This work has been initiated in the frame of the ERC Advanced Grant TICAL #338953 PI Paul Lecoq, and the related Prof-of-Concept Project ULTIMA #680552, both funded by the European Commission. It has been in part supported by the European Research Council (ERC) under the European Union’s Horizon 2020 Research and Innovation Program (Grant Agreement #695536) and the Brazilian funding agency Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq, Grant Agreement No 202378/2020-9). It is pursued through a public–private partnership between Multiwave Metacrystal SA, Geneva, Switzerland, and the Instituto de Instrumentación para Imagen Molecular, Centro Mixto CSIC-UPV, Valencia, Spain.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Metascintillators: New Results for TOF-PET Applications

  • Lecoq, P.
  • Konstantinou, Georgios
  • Latella, Riccardo
  • Moliner, Laura
  • Nuyts, Johan
  • Zhang, Lei
  • Barrio Toala, J.
  • Benlloch Baviera, José María
  • González Martínez, Antonio Javier
We report on the progress on a first generation of realistic size metascintillators for time-of-flight PET. These heterostructures combine dense LYSO or BGO plates, interleaved with fast scintillator layers producing a bunch of prompt photons from the energy leakage of the recoil photoelectric electron. From a Geant4 simulation of the energy sharing distribution between the dense and the fast scintillator on 42 LYSO-based and 42 BGO-based configurations, a detailed study of the timing performance has been performed on a selection of the most promising 12 LYSO-based and 14 BGO-based metascintillators. A Monte Carlo simulation was first performed to extrapolate from direct measurements of the performance of the metascintillator components, the detector time resolution (DTR), and sensitivity on the basis of the simulated amount of energy leakage to the fast scintillator. An analytic algorithm was then applied to determine an equivalent coincidence time resolution (CTR) from the random association of the DTR distributions from two metapixels in coincidence. This equivalent CTR is calculated in order to obtain the same variance in the reconstructed image as the combination of the DTR distributions of 2 metapixels. Preliminary results confirm that with these simple and still nonoptimized configurations, an equivalent CTR of 150 ps for BGO-based and 140 ps for LYSO-based metapixels of realistic size can be obtained., This work was supported in part by the European Research Council (ERC) through the European Union’s Horizon 2020 Research and Innovation Programme under Grant 695536. The work of P. Lecoq was supported in part by ERC Advanced under Grant TICAL 338953, and in part by the related Proof-ofConcept Project under Grant ULTIMA 680552, both funded by the European Commission. (Corresponding author: P. Lecoq.), Peer reviewed