Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 13
Encontrada(s) 1 página(s)

Dipòsit Digital de la UB
Publicación Artículo científico (JournalArticle)

Role of aluminum and HMTA in the hydrothermal synthesis of two-dimensional n-doped ZnO nanosheets

  • Murillo, Gonzalo
  • León-Salguero, Edgardo
  • Martínez-Alanis, Paulina R.
  • Esteve Tintó, Jaume
  • Alvarado-Rivera, Josefina
  • Güell Vilà, Frank
This work reports the study of the processes behind the growth of two-dimensional (2D) n-doped ZnO nanostructures on an AlN layer. We have demonstrated that AlN undergoes a slow dissociation process due to the basic controlled environment promoted by the hexamethylenetetramine (HMTA). The Al(OH)4- ions created inhibits the growth along the c-axis, effectively promoting the fast formation of a planar geometry selectively grown on top of the AlN layer. With the use of this promoting layer and a standard hydrothermal method, a selective area growth is observed with micrometric resolution. In addition, by using several advanced characterization techniques such as, X-ray diffraction (XRD), energy-dispersive X-ray spectroscopy (EDS/EDX), X-ray photoelectron spectroscopy (XPS) and photoluminescence (PL), we observed a resulting doping with aluminum of the ZnO nanostructures, occupying substitutional and interstitial sites, that could lead to new promising applications. These high-quality n-doped ZnO nanosheets (NSs) exhibit strong ultraviolet emission in the 385-405 nm region without broad deep level emission. The piezoelectric nature of these nanostructures has been demonstrated by using piezoresponse atomic force microscope (PFM) and with the support of a piezoelectric test device. Therefore, this low-cost and fast selective-area synthesis of 2D n-doped ZnO NSs can be applicable to other aluminum based materials and paves the way to new promising applications, such as bioelectronic applications, energy generation or self-powered sensing
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Improving Morphological Quality and Uniformity of Hydrothermally Grown ZnO Nanowires by Surface Activation of Catalyst Layer

  • Murillo Rodríguez, Gonzalo
  • Lozano, Helena
  • Cases-Utrera, Joana
  • Lee, Minbaek
  • Esteve, Jaume
This paper presents a study about the dependence of the hydrothermal growth of ZnO nanowires (NWs) with the passivation level of the active surface of the Au catalyst layer. The hydrothermal method has many potential applications because of its low processing temperature, feasibility, and low cost. However, when a gold thin film is utilized as the seed material, the grown NWs often lack morphological homogeneity; their distribution is not uniform and the reproducibility of the growth is low. We hypothesize that the state or condition of the active surface of the Au catalyst layer has a critical effect on the uniformity of the NWs. Inspired by traditional electrochemistry experiments, in which Au electrodes are typically activated before the measurements, we demonstrate that such activation is a simple way to effectively assist and enhance NW growth. In addition, several cleaning processes are examined to find one that yields NWs with optimal quality, density, and vertical alignment. We find cyclic voltammetry measurements to be a reliable indicator of the seed-layer quality for subsequent NW growth. Therefore, we propose the use of this technique as a standard procedure prior to the hydrothermal synthesis of ZnO NWs to control the growth reproducibility and to allow high-yield wafer-level processing., This work was supported by NEMSPUN project (i-LINK0616), EnSO (Energy for Smart Objects), Grant Agreement n. 692482 (H2020-ECSEL-2015-2-IA-two-stage), NG4Beat (TEC2015-72461-EXP) and SiNERGY (Silicon Friendly Materials and Device Solutions for Microenergy Applications), Contract n. 604169 (FP7-NMP-2013-SMALL-7). In addition, Dr. GM acknowledges his JAE‐Doc contract from the Spanish National Research Council (CSIC) under the “Junta para la Ampliación de Estudios” Programme, co‐funded by the European Social Fund (ESF). ML acknowledges the support from the National Research Foundation of Korea (NRF) grant funded by the Korean government (MSIP) (No. 2014R1A1A1038374)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Dominant role of young’s modulus for electric power generation in PVDF–BaTiO3 composite-based piezoelectric nanogenerator

  • Kim, Hyun Soo
  • Lee, Dong Woo
  • Kim, Do Hyung
  • Kong, Dae Sol
  • Choi, Jinhyeok
  • Lee, Minbaek
  • Murillo Rodríguez, Gonzalo
  • Jung, Jong Hoon
The electric power output of a piezoelectric nanogenerator (PENG) depends on the various physical parameters of the constituent materials, including the piezoelectric coefficient, Young’s modulus, and dielectric constant. Herein, we report the mechanical and electrical properties of a poly(vinylidene fluoride)–BaTiO3 (PVDF–BTO) composite-based PENG. Variation of the BTO nanoparticle (NP) content enabled the systematic tuning of the physical parameters that are related to power generation in the composite. The Young’s modulus of the PVDF–BTO composite initially increased, and then eventually decreased, with the increasing BTO content, which was probably due to the clustering effect of the high modulus BTO NPs. The dielectric constant of the composite continuously increased as the BaTiO3 content increased. The piezoelectric outputs were greatly enhanced at 10 wt% of BTO, where the Young’s modulus was the highest. These results indicate that the Young’s modulus plays an important role in the piezoelectric power generation of the composite-based PENGs., This research was supported by Basic Science Research Program through the National Research Foundation of Korea (NRF) funded by the Ministry of Education, Science and Technology (2016R1A2B4014134, 2017R1D1A1B03034749), EnSO project (H2020-ECSEL-JU, contract number: 692482), and Nano Material Technology Development Program through the National Research Foundation of Korea (NRF) funded by the Ministry of Science, ICT and Future Planning (2009-0082580)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optimization of a Piezoelectric Energy Harvester and Design of a Charge Pump Converter for CMOS-MEMS Monolithic Integration

  • Duque, Marcos
  • Leon-Salguero, Edgardo
  • Sacristán-Riquelme, Jordi
  • Esteve i Tintó, Jaume
  • Murillo Rodríguez, Gonzalo
The increasing interest in the Internet of Things (IoT) has led to the rapid development of low-power sensors and wireless networks. However, there are still several barriers that make a global deployment of the IoT difficult. One of these issues is the energy dependence, normally limited by the capacitance of the batteries. A promising solution to provide energy autonomy to the IoT nodes is to harvest residual energy from ambient sources, such as motion, vibrations, light, or heat. Mechanical energy can be converted into electrical energy by using piezoelectric transducers. The piezoelectric generators provide an alternating electrical signal that must be rectified and, therefore, needs a power management circuit to adapt the output to the operating voltage of the IoT devices. The bonding and packaging of the different components constitute a large part of the cost of the manufacturing process of microelectromechanical systems (MEMS) and integrated circuits. This could be reduced by using a monolithic integration of the generator together with the circuitry in a single chip. In this work, we report the optimization, fabrication, and characterization of a vibration-driven piezoelectric MEMS energy harvester, and the design and simulation of a charge-pump converter based on a standard complementary metal–oxide–semiconductor (CMOS) technology. Finally, we propose combining MEMS and CMOS technologies to obtain a fully integrated system that includes the piezoelectric generator device and the charge-pump converter circuit without the need of external components. This solution opens new doors to the development of low-cost autonomous smart dust devices., The authors M. Duque and G. Murillo from the Instituto de Microelectrónica de Barcelona would like to thank the financial support of EnSO project (Energy for Smart Objects), Contract No. 692482. In addition, G. Murillo, as founder, wants to thanks the use of future commercial developments for research publication to ENERGIOT Devices SL and its investors EIT Innoenergy, We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Non-linear nanoscale piezoresponse of single ZnO nanowires affected by piezotronic effect

  • Lozano, Helena
  • Catalán, Gustau
  • Esteve, Jaume
  • Domingo, Neus
  • Murillo Rodríguez, Gonzalo
Zinc oxide (ZnO) nanowires (NWs) as semiconductor piezoelectric nanostructures have emerged as material of interest for applications in energy harvesting, photonics, sensing, biomedical science, actuators or spintronics. The expression for the piezoelectric properties in semiconductor materials is concealed by the screening effect of the available carriers and the piezotronic effect, leading to complex nanoscale piezoresponse signals. Here, we have developed a metal–semiconductor–metal model to simulate the piezoresponse of single ZnO NWs, demonstrating that the apparent non-linearity in the piezoelectric coefficient arises from the asymmetry created by the forward and reversed biased Schottky barriers at the semiconductor–metal junctions. By directly measuring the experimental I–V characteristics of ZnO NWs with conductive atomic force microscope together with the piezoelectric vertical coefficient by piezoresponse force microscopy, and comparing them with the numerical calculations for our model, effective piezoelectric coefficients in the range d33eff ∼ 8.6 pm V−1–12.3 pm V−1 have been extracted for ZnO NWs. We have further demonstrated via simulations the dependence between the effective piezoelectric coefficient d33eff and the geometry and physical dimensions of the NW (radius to length ratio), revealing that the higher d33eff is obtained for thin and long NWs due to the tensor nature proportionality between electric fields and deformation in NW geometries. Moreover, the non-linearity of the piezoresponse also leads to multiharmonic electromechanical response observed at the second and higher harmonics that indeed is not restricted to piezoelectric semiconductor materials but can be generalized to any type of asymmetric voltage drops on a piezoelectric structure as well as leaky wide band-gap semiconductor ferroelectrics., Financial support was obtained under projects from the Spanish Ministerio de Economía y Competitividad (MINECO) under project FIS2015-73932-JIN, H2020 ECSEL-JU under EnSO project (Energy for Smart Objetcs) (Contract no. 692482) and La Caixa Foundation under the Junior Leader Retaining program (LCF/BQ/PR19/11700010). In addition, this work was partially funded by 2017-SGR-579 from the Generalitat de Catalunya. ICN2 is supported by the Severo Ochoa program from Spanish MINECO (Grant Nos. SEV-2017-0706)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Role of aluminum and HMTA in the hydrothermal synthesis of two-dimensional n-doped ZnO nanosheets

  • Murillo Rodríguez, Gonzalo
  • Leon-Salguero, Edgardo
  • Martínez-Alanis, Paulina R.
  • Esteve, Jaume
  • Alvarado-Rivera, Josefina
  • Güell, Frank
This work reports the study of the processes behind the growth of two-dimensional (2D) n-doped ZnO nanostructures on an AlN layer. We have demonstrated that AlN undergoes a slow dissociation process due to the basic controlled environment promoted by the hexamethylenetetramine (HMTA). The Al(OH) 4- ions created inhibits the growth along the c-axis, effectively promoting the fast formation of a planar geometry selectively grown on top of the AlN layer. With the use of this promoting layer and a standard hydrothermal method, a selective area growth is observed with micrometric resolution. In addition, by using several advanced characterization techniques such as, X-ray diffraction (XRD), energy-dispersive X-ray spectroscopy (EDS/EDX), X-ray photoelectron spectroscopy (XPS) and photoluminescence (PL), we observed a resulting doping with aluminum of the ZnO nanostructures, occupying substitutional and interstitial sites, that could lead to new promising applications. These high-quality n-doped ZnO nanosheets (NSs) exhibit strong ultraviolet emission in the 385–405 nm region without broad deep level emission. The piezoelectric nature of these nanostructures has been demonstrated by using piezoresponse atomic force microscope (PFM) and with the support of a piezoelectric test device. Therefore, this low-cost and fast selective-area synthesis of 2D n-doped ZnO NSs can be applicable to other aluminum based materials and paves the way to new promising applications, such as bioelectronic applications, energy generation or self-powered sensing., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Floating buoy-based triboelectric nanogenerator for an effective vibrational energy harvesting from irregular and random water waves in wild sea

  • Kim, Dong Yeong
  • Kim, Hyun Soo
  • Kong, Dae Sol
  • Choi, Moonkang
  • Kim, Hak Bum
  • Lee, Jae Hyoung
  • Murillo Rodríguez, Gonzalo
  • Lee, Minbaek
  • Kim, Sang Sub
  • Jung, Jong Hoon
Water waves in wild sea have unique characteristics of being huge, random, irregular, and of low frequency. To effectively harvest such vibrational energy, any devices should be light enough to float, sensitive even to small amplitudes, durable against harsh environmental conditions, easily replaceable after long-term use, and easily linked to form a network. Here, a floating buoy-based triboelectric nanogenerator (FB-TENG) is demonstrated to effectively harvest the vibrational energy with full satisfaction of these requirements. The FB-TENG consisted simply of a power generation unit, which was packed in an acrylic case, and a height-adjustable support, which was attached to a floating buoy. Even for the small amplitude of water waves, the height-adjustable support provides vigorous vibration at the power generation unit; which was sufficient to power 30 light-emitting diodes (LEDs), and operate a digital thermo-hygrometer and an anenometer. Under saltwater (salinity of 40%), thermal shocks (temperature range of 4–60 °C), and strong ultraviolet irradiation (power of 10 W), the FB-TENG generates stable electric power by virtue of the acrylic packing of the power generation units. The FB-TENG also generates electric power from the various and mixed amplitudes and frequencies of water waves coming from all directions. Furthermore, the FB-TENG can easily be integrated into a network for high-power generation. This work provides a significant step forward in the harvesting of the blue energy of water waves, and the realization of self-powered sea mark and weather monitoring systems in wild sea., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ferroelectric-Polymer-Enabled Contactless Electric Power Generation in Triboelectric Nanogenerators

  • Kim, Hyun Soo
  • Kim, Dong Yeong
  • Kim, Jae Eun
  • Kim, Jong Hun
  • Kong, Dae Sol
  • Murillo Rodríguez, Gonzalo
  • Lee, Gwan Hyoung
  • Park, Jeong Young
  • Jung, Jong Hoon
Triboelectric nanogenerators (TENGs) are considered as one of the most important renewable power sources for mobile electronic devices and various sensors in the Internet of Things era. However, their performance should inherently be degraded by the wearing of contact surfaces after long-term use. Here, a ferroelectric polymer is shown to enable TENGs to generate considerable electricity without contact. Ferroelectric-polymer-embedded TENG (FE-TENG) consists of indium tin oxide (ITO) electrodes, a polydimethylsiloxane (PDMS) elastomer, and a poly(vinylidene fluoride) (PVDF) polymer. In contrast to down- and non-polarization, up-polarized PVDF causes significantly large triboelectric charge, rapidly saturated voltage/current, and considerable remaining charge due to the modulated surface potential and increased capacitance. The remained triboelectric charges flow by just approaching/receding the ITO electrode to/from the PDMS without contact, which is sufficient to power light-emitting diodes and liquid crystal displays. Additionally, the FE-TENG can charge an Li-battery with a significantly reduced number of contact cycles. Furthermore, an arch-shaped FE-TENG is demonstrated to operate a wireless temperature sensor network by scavenging the irregular and random vibrations of water waves. This work provides an innovative and simple method to increase conversion efficiency and lifetime of TENGs; which widens the applications of TENG to inaccessible areas like the ocean., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Fully-Printed Piezoelectric Devices for Flexible Electronics Applications

  • Aliqué, Marc
  • Simão, Claudia Delgado
  • Murillo, Gonzalo
  • Moya, Ana
Recent advances in materials and manufacturing processes pave the way for the establishment of piezoelectric materials via printing techniques as flexible sensors, actuators, and generators. Such flexible devices are key building blocks for future advanced robotic skin and conformable medical devices. Herein special focus is given to printed devices for its lightweight, flexibility, and manufacturing by high throughput techniques, offering a disruptive advantage in integration technologies and a wide range of opportunities for industrialization routes, where cost-effective applications are required. In this Progress Report, the different system parameters are discussed, pinpointing the ones that affect the production of reliable flexible printed piezoelectric devices and limit this technology to achieve higher technological maturity. Focus is made on screen and inkjet printing as fabrication techniques and the well-established piezoelectric polymer poly(vinylidene fluoride-co-trifluoroethylene). Key limiting factors found for the manufacturing of robust scalable all-printed piezoelectric devices stems mainly from the piezoelectric ink production and processing. Finally, the integration of these materials, via printing technologies, into soft, flexible, and even stretchable substrates is analyzed and insights are gathered on the manufacturing trends to achieve low-cost production of flexible piezoelectric devices embedded in electronic skin and smart wearables., M.A. is a fellow of Eurecat “Vicente Lopez” Ph.D. grant program. This work was financially supported by the Catalan Government through the funding grant ACCIÓ-Eurecat. G.M. thanks the financial support from La Caixa Foundation under the Junior Leader Retaining Fellowship (LCF/BQ/PR19/11700010) and EnSO project, accepted for funding within the Electronic Components and Systems for European Leadership Joint Undertaking in collaboration with the European Union's H2020 Framework Program (H2020/2014-2020) and National Authorities, under Grant Agreement No. 692482., Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

An Add-On Electronic Device to Upgrade Mechanical Gas Meters into Electronic Ones

  • Ripoll Vercellone, Edgar|||0000-0003-0013-5354
  • Ferrandiz, Vicent
  • Gasulla Forner, Manuel|||0000-0002-0364-6806
Smart utilities enable more efficient energy consumption and distribution and are the key for smart homes development. We propose an electronic device that will be integrated as an add-on to already installed conventional gas meters as a first stage of smart metering rollout. The electronic device will measure the gas consumption and it will be managed by the user’s or operator’s smartphone via NFC. For the gas flow measurement, the electronic device takes advantage of the rotation of a permanent magnet fixed in an index drum., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

An Add-On Electronic Device to Upgrade Mechanical Gas Meters into Electronic Ones

  • Ripoll Vercellone, Edgar
  • Ferrandiz, Vicent
  • Gasulla Forner, Manuel
Smart utilities enable more efficient energy consumption and distribution and are the key for smart homes development. We propose an electronic device that will be integrated as an add-on to already installed conventional gas meters as a first stage of smart metering rollout. The electronic device will measure the gas consumption and it will be managed by the user’s or operator’s smartphone via NFC. For the gas flow measurement, the electronic device takes advantage of the rotation of a permanent magnet fixed in an index drum., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Role of aluminum and HMTA in the hydrothermal synthesis of two-dimensional n-doped ZnO nanosheets

  • Murillo, Gonzalo
  • León-Salguero, Edgardo
  • Martínez-Alanis, Paulina R.
  • Esteve Tintó, Jaume
  • Alvarado-Rivera, Josefina
  • Güell Vilà, Frank
This work reports the study of the processes behind the growth of two-dimensional (2D) n-doped ZnO nanostructures on an AlN layer. We have demonstrated that AlN undergoes a slow dissociation process due to the basic controlled environment promoted by the hexamethylenetetramine (HMTA). The Al(OH)4- ions created inhibits the growth along the c-axis, effectively promoting the fast formation of a planar geometry selectively grown on top of the AlN layer. With the use of this promoting layer and a standard hydrothermal method, a selective area growth is observed with micrometric resolution. In addition, by using several advanced characterization techniques such as, X-ray diffraction (XRD), energy-dispersive X-ray spectroscopy (EDS/EDX), X-ray photoelectron spectroscopy (XPS) and photoluminescence (PL), we observed a resulting doping with aluminum of the ZnO nanostructures, occupying substitutional and interstitial sites, that could lead to new promising applications. These high-quality n-doped ZnO nanosheets (NSs) exhibit strong ultraviolet emission in the 385-405 nm region without broad deep level emission. The piezoelectric nature of these nanostructures has been demonstrated by using piezoresponse atomic force microscope (PFM) and with the support of a piezoelectric test device. Therefore, this low-cost and fast selective-area synthesis of 2D n-doped ZnO NSs can be applicable to other aluminum based materials and paves the way to new promising applications, such as bioelectronic applications, energy generation or self-powered sensing
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Non-linear nanoscale piezoresponse of single ZnO nanowires affected by piezotronic effect

  • Lozano, Helena|||0000-0002-8609-003X
  • Catalan, Gustau|||0000-0003-0214-4828
  • Esteve, Jaume|||0000-0001-9440-7984
  • Domingo Marimon, Neus|||0000-0002-5229-6638
  • Murillo, Gonzalo|||0000-0002-0368-1900
Zinc oxide (ZnO) nanowires (NWs) as semiconductor piezoelectric nanostructures have emerged as material of interest for applications in energy harvesting, photonics, sensing, biomedical science, actuators or spintronics. The expression for the piezoelectric properties in semiconductor materials is concealed by the screening effect of the available carriers and the piezotronic effect, leading to complex nanoscale piezoresponse signals. Here, we have developed a metal-semiconductor-metal model to simulate the piezoresponse of single ZnO NWs, demonstrating that the apparent non-linearity in the piezoelectric coefficient arises from the asymmetry created by the forward and reversed biased Schottky barriers at the semiconductor-metal junctions. By directly measuring the experimental I-V characteristics of ZnO NWs with conductive atomic force microscope together with the piezoelectric vertical coefficient by piezoresponse force microscopy, and comparing them with the numerical calculations for our model, effective piezoelectric coefficients in the range d 33eff ∼ 8.6 pm V¯¹-12.3 pm V¯¹ have been extracted for ZnO NWs. We have further demonstrated via simulations the dependence between the effective piezoelectric coefficient d 33eff and the geometry and physical dimensions of the NW (radius to length ratio), revealing that the higher d 33eff is obtained for thin and long NWs due to the tensor nature proportionality between electric fields and deformation in NW geometries. Moreover, the non-linearity of the piezoresponse also leads to multiharmonic electromechanical response observed at the second and higher harmonics that indeed is not restricted to piezoelectric semiconductor materials but can be generalized to any type of asymmetric voltage drops on a piezoelectric structure as well as leaky wide band-gap semiconductor ferroelectrics.