Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 12
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Paleogenomes reveal the evolutionary relationship between modern and cave lions

  • Stanton, David|||0000-0002-9753-3166
  • Bergström, Anders|||0000-0002-4096-9268
  • Heintzman, Peter D.|||0000-0002-6449-0219
  • van der Valk, Tom|||0000-0001-6582-3452
  • Carmagnini, Alberto|||0000-0002-5215-4269
  • Ersmark, Erik|||0000-0003-4186-7498
  • Pawar, Harvinder|||0000-0002-3852-4999
  • Sandoval-Velasco, Marcela|||0000-0002-4635-6171
  • Androsov, Semyon
  • Fedorov, Sergey
  • Kuhlwilm, Martin|||0000-0002-0115-1797
  • Nagel, Doris
  • Plotnikov, Valerii V.|||0000-0002-4870-3499
  • Protopopov, Albert V.
  • Shapiro, Beth|||0000-0002-2733-7776
  • Barnett, Ross|||0000-0003-4023-0284
  • Sinding, Mikkel-Holger S.|||0000-0003-1371-219X
  • Marquès i Bonet, Tomàs|||0000-0002-5597-3075
  • Yamaguchi, Nobuyuki|||0000-0002-6492-6588
  • Gilbert, M. Thomas P.|||0000-0002-5805-7195
  • Gotherstrom, Anders
  • Skoglund, Pontus|||0000-0002-3021-5913
  • Frantz, Laurent|||0000-0001-8030-3885
  • Dalén, Love|||0000-0001-8270-7613
The Eurasian cave lion was abundant across the Northern Hemisphere before the Late Pleistocene megafaunal extinctions. However, the extent of the distinction between cave and modern lions and their adaptive differences have remained unclear. Using 12 cave lion genomes spanning more than 100,000 years, we show that modern and cave lions were distinct evolutionary lineages with separate demographic histories and unique non-synonymous variants. We also identify evidence of ancient gene flow between them, with the best modern lion proxy for this ancestry being an extinct Southwest Asian population. This admixture correlates with global ice extent, with 3.2%–4.4% modern lion ancestry detected in a ∼20,000-year-old cave lion from Central East Asia. These findings provide insight into the evolutionary history of the cave lion, once one of the Northern Hemisphere’s most ecologically impactful megafaunal species.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

ZnO Nanosheet-Coated TiZrPdSiNb Alloy as a Piezoelectric Hybrid Material for Self-Stimulating Orthopedic Implants

  • Careta, Oriol
  • Fornell, Jordina
  • Pellicer, Eva
  • Ibáñez, Elena
  • Blanquer, Andreu
  • Esteve, Jaume
  • Sort, Jordi
  • Murillo Rodríguez, Gonzalo
  • Nogués, Carme
A Ti-based alloy (Ti45Zr15Pd30Si5Nb5) with already proven excellent mechanical and biocompatibility features has been coated with piezoelectric zinc oxide (ZnO) to induce the electrical self-stimulation of cells. ZnO was grown onto the pristine alloy in two different morphologies: a flat dense film and an array of nanosheets. The effect of the combined material on osteoblasts (electrically stimulable cells) was analyzed in terms of proliferation, cell adhesion, expression of differentiation markers and induction of calcium transients. Although both ZnO structures were biocompatible and did not induce inflammatory response, only the array of ZnO nanosheets was able to induce calcium transients, which improved the proliferation of Saos-2 cells and enhanced the expression of some early differentiation expression genes. The usual motion of the cells imposes strain to the ZnO nanosheets, which, in turn, create local electric fields owing to their piezoelectric character. These electric fields cause the opening of calcium voltage gates and boost cell proliferation and early differentiation. Thus, the modification of the Ti45Zr15Pd30Si5Nb5 surface with an array of ZnO nanosheets endows the alloy with smart characteristics, making it capable of electric self-stimulation., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Biocompatibility and Electrical Stimulation of Skeletal and Smooth Muscle Cells Cultured on Piezoelectric Nanogenerators

  • Blanquer, Andreu
  • Careta, Oriol
  • Anido-Varela, Laura
  • Aranda, Aida
  • Ibáñez, Elena
  • Esteve, Jaume
  • Nogués, Carme
  • Murillo Rodríguez, Gonzalo
Nanogenerators are interesting for biomedical applications, with a great potential for electrical stimulation of excitable cells. Piezoelectric ZnO nanosheets present unique properties for tissue engineering. In this study, nanogenerator arrays based on ZnO nanosheets are fabricated on transparent coverslips to analyse the biocompatibility and the electromechanical interaction with two types of muscle cells, smooth and skeletal. Both cell types adhere, proliferate and differentiate on the ZnO nanogenerators. Interestingly, the amount of Zn ions released over time from the nanogenerators does not interfere with cell viability and does not trigger the associated inflammatory response, which is not triggered by the nanogenerators themselves either. The local electric field generated by the electromechanical nanogenerator-cell interaction stimulates smooth muscle cells by increasing cytosolic calcium ions, whereas no stimulation effect is observed on skeletal muscle cells. The random orientation of the ZnO nanogenerators, avoiding an overall action potential aligned along the muscle fibre, is hypothesised to be the cause of the cell-type dependent response. This demonstrates the need of optimizing the nanogenerator morphology, orientation and distribution according to the potential biomedical use. Thus, this study demonstrates the cell-scale stimulation triggered by biocompatible piezoelectric nanogenerators without using an external source on smooth muscle cells, although it remarks the cell type-dependent response., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Piezoelectric MEMS resonator with magnetic tip mass for energy harvesting from ultra-low intensity magnetic fields

  • Duque, Marcos
  • Murillo Rodríguez, Gonzalo
This article addresses the limitation in the implementation of the Internet of Things (IoT) due to its energy dependence on batteries. The central focus of this work is the development and characterization of a magnetoelectric (ME) energy generator for IoT, which combines a piezoelectric microelectromechanical system (MEMS) with a magnetic mass to interact with ambient magnetic fields (MFs). The device's efficiency is validated through finite element modeling (FEM) simulations and electrical characterization. Its applicability in environments with residual magnetic fields, such as near common household appliances, highlights its viability. Specific results, such as a maximum generated power of 0.55 µW, corresponding to a power density of 9.19 µW/cm³, for a magnetic field strength of 5 µT, emphasize its ability to address energy challenges and promote the sustainable autonomy of IoT., Funding text 1 G. Murillo thanks the financial support from the La Caixa Foundation under the Junior Leader Retaining Fellowship (LCF/BQ/PR19/11700010), the national projects PID2020-119350RA-I00, EUR2020-112082 and CNS2022-136065, under the Dynamization Actions \"Europa Excelencia 2020\u201D and the Consolidation Actions funded by the NextGenerationEU Instrument and Ramon y Cajal Fellowship 2020 (RYC2020-030501-I). This work has been carried out in collaboration with ENERGIOT DEVICES SL (www.energiot.com), who holds part of the intellectual property and is funded by the European Union under the Silicon Eurocluster project (101074552), and in the framework of the doctoral program in Electronic and Telecommunication Engineering of the Autonomous University of Barcelona. Funding text 2 G. Murillo thanks the financial support from the La Caixa Foundation under the Junior Leader Retaining Fellowship (LCF/BQ/PR19/11700010), the national projects PID2020-119350RA-I00, EUR2020-112082 and CNS2022-136065, under the Dynamization Actions \"Europa Excelencia 2020\u201D and the Consolidation Actions funded by the NextGenerationEU Instrument and Ramon y Cajal Fellowship 2020 (RYC2020-030501-I). This work has been carried out in collaboration with ENERGIOT DEVICES SL ( www.energiot.com ), who holds part of the intellectual property, and in the framework of the doctoral program in Electronic and Telecommunication Engineering of the Autonomous University of Barcelona., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Replication data for Piezoelectric MEMS resonator with magnetic tip mass for energy harvesting from ultra-low intensity magnetic fields

  • Duque, Marcos
  • Murillo Rodríguez, Gonzalo
This article addresses the limitation in the implementation of the Internet of Things (IoT) due to its energy dependence on batteries. The central focus of this work is the development and characterization of a magnetoelectric (ME) energy generator for IoT, which combines a piezoelectric microelectromechanical system (MEMS) with a magnetic mass to interact with ambient magnetic fields (MFs). The device's efficiency is validated through finite element modeling (FEM) simulations and electrical characterization. Its applicability in environments with residual magnetic fields, such as near common household appliances, highlights its viability. Specific results, such as a maximum generated power of 0.55 µW, corresponding to a power density of 9.19 µW/cm³, for a magnetic field strength of 5 µT, emphasize its ability to address energy challenges and promote the sustainable autonomy of IoT., Funding text 1 G. Murillo thanks the financial support from the La Caixa Foundation under the Junior Leader Retaining Fellowship (LCF/BQ/PR19/11700010), the national projects PID2020-119350RA-I00, EUR2020-112082 and CNS2022-136065, under the Dynamization Actions \"Europa Excelencia 2020\u201D and the Consolidation Actions funded by the NextGenerationEU Instrument and Ramon y Cajal Fellowship 2020 (RYC2020-030501-I). This work has been carried out in collaboration with ENERGIOT DEVICES SL (www.energiot.com), who holds part of the intellectual property and is funded by the European Union under the Silicon Eurocluster project (101074552), and in the framework of the doctoral program in Electronic and Telecommunication Engineering of the Autonomous University of Barcelona. Funding text 2 G. Murillo thanks the financial support from the La Caixa Foundation under the Junior Leader Retaining Fellowship (LCF/BQ/PR19/11700010), the national projects PID2020-119350RA-I00, EUR2020-112082 and CNS2022-136065, under the Dynamization Actions \"Europa Excelencia 2020\u201D and the Consolidation Actions funded by the NextGenerationEU Instrument and Ramon y Cajal Fellowship 2020 (RYC2020-030501-I). This work has been carried out in collaboration with ENERGIOT DEVICES SL ( www.energiot.com ), who holds part of the intellectual property, and in the framework of the doctoral program in Electronic and Telecommunication Engineering of the Autonomous University of Barcelona., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tailoring Piezoelectric Nanogenerators and Microdevices for Cellular Excitation: Impact of Size and Morphology

  • Lefaix, Laura
  • Navarro, Marc
  • Nogués, Carme
  • Blanquer, Andreu
  • Murillo, Gonzalo
The use of piezoelectric devices as wireless electrical stimulators is an emerging research topic. In this study, piezoelectric microdevices, consisting of ZnO nanosheets (NSs) functioning as piezoelectric nanogenerators (NGs) grown on top of silicon microparticles, to electrically stimulate cell are designed. The morphology of the ZnO NSs is optimized by tuning the thickness of the aluminum nitride (AlN) catalyst layer and adjusting the growth duration. ZnO NSs grown on thinner AlN layers (≤ 200 nm) and subjected to 9 h of hydrothermal growth exhibit the most suitable characteristics for cell stimulation, balancing crystal size, and electric field generation. The generation of a local electric field capable of exciting osteoblast cells is inferred from finite element simulations and intracellular calcium influx measurements. The internalization rate of silicon microdevices of varying sizes (3 × 3, 6 × 10, 12 × 18 µm2) by osteosarcoma (Saos-2) and primary human osteoblast (hOB) cells is assessed. The results show that smaller devices have higher internalization rates, particularly in tumoral Saos-2 cells, while primary cells exhibit minimal internalization (< 10%) across all particle sizes. This study presents an optimized piezoelectric microdevice, based on a scalable and customizable fabrication process, for minimally invasive bioelectronic applications, offering accurate electrical cell stimulation while minimizing unwanted internalization., L. L. would like to thank CSIC for the funding obtained through the JAE Intro 2019 and JAE Intro ICUs (BOE-A-2007-14853) programs. This work was carried out within the framework of the Ph.D. program in Biotechnol- ogy of the Universitat Autònoma de Barcelona (UAB). A.B. received fund-ing from a postdoctoral fellowship within the Beatriu de Pinós program, funded by the Secretary of Universities and Research (Government of Cat- alonia) and by the Horizon 2020 program of research and innovation of the European Union under Marie Sklodowska-Curiegrant agreement No. 801370. G. M. thanks the La Caixa Foundation for the Junior Leader Retain-ing Fellowship program (LCF/BQ/ PR19/11700010) and MINECO for the Ramon y Cajal Fellowship (RYC2020-030501-I). This work was supported by the Agencia Estatal de Investigación from the Spanish Government (PID2023-148047OB-C21, PID2023-148047OA-C22, PID2020-119350RA-I00 and ID2020-116844RB-C21), and from the European Union under the Dynamization Actions Europa Excelencia 2020 funded by NextGen-erationEU Instrument (EUR2020-112082, PIEZO2CELL). This work also received additional support from Generalitat de Catalunya-AGAUR (2021 SGR 00497 and 2021-SGR-00122). Finally, we also want to acknowledge all the efforts of the staff at IMB-CNM (CSIC), especially the cleanroom engineers, and the staff of the Servei de Microscòpia de la Universitat Autònoma de Barcelona., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Multiplex Sensing Electronic Skin Based on Seamless Fully Printed Stretchable Piezoelectric Devices

  • Alique, Marc
  • Moya, Ana
  • Otero, David
  • Kreuzer, Martin
  • Lacharmoise, Paul
  • Murillo, Gonzalo
  • Delgado Simao, Claudia
Wearable skin mountable devices, more than flexibility, require conformability, stretchability, and a high water vapor transmission rate, so that the perspiration processes are not blocked, to assure comfort and stability of use in contact with living bodies. Skin mountable stretchable devices with piezoelectric devices have been reported, based on the integration of polyvinylidene fluoride foils with discrete electrodes and stretchable substrates, and show potential in revolutionizing medical devices for remote monitoring applications. However, the electrodes and active layer are usually not stretchable, only the carrier substrate. The study reports the full description of a novel fully printed stretchable piezoelectric device, printed directly over a stretchable polymer foil of thermoplastic polyurethane. The stability of the response of the stretchable piezoelectric devices is used as movement sensors through their output potential. An electronic skin based on a fully printed circuit with a matrix of 15 all-printed piezoelectric devices is prepared and investigated and used directly mounted on different body parts, and the real-time monitoring of movements are recorded and analyzed., M.A. is a fellow of Eurecat “Vicente Lopez” PhD grant program. This work was financially supported by the Catalan Government through the funding grant ACCIÓ-Eurecat. G.M. thanks the financial support from La Caixa Foundation under the Junior Leader Retaining Fellowship (LCF/BQ/PR19/11700010) and EUR2020-112082 under the Dynamization Actions Europa Excelencia 2020 funded by NextGenerationEU Instrument. The FTIR experiments were performed at MIRAS beamline at ALBA Synchrotron with the collaboration of ALBA staff. The GIWAXS experiments were performed at NCD-SWEET beamline at ALBA Synchrotron with the collaboration of ALBA staff. All experiments involving human participants were carried out with their informed consent., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tapping-Actuated Triboelectric Nanogenerator with Surface Charge Density Optimization for Human Motion Energy Harvesting

  • Duque, Marcos
  • Murillo, Gonzalo
In this article, triboelectric effect has been used to harvest mechanical energy from human motion and convert it into electrical energy. To do so, different ways of optimizing the energy generated have been studied through the correct selection of materials, the design of new spacers to improve the contact surface area, and charge injection by high-voltage corona charging to increase the charge density of dielectric materials. Finally, a triboelectric nanogenerator (TENG) has been manufactured, which is capable of collecting the mechanical energy of the force applied by hand tapping and using it to power miniaturized electronic sensors in a self-sufficient and sustainable way. This work shows the theoretical concept and simulations of the proposed TENG device, as well as the experimental work carried out., G.M. appreciates the financial support from the La Caixa Foundation under the Junior Leader Retaining Fellowship (LCF/BQ/PR19/11700010), project EUR2020-112082 under the Dynamization Actions “Europa Excelencia 2020” funded by the NextGenerationEU Instrument, and the Ramon y Cajal Fellowship 2020. This work has been carried out in collaboration with ENERGIOT DEVICES SL (www.energiot.com) and in the framework of the doctoral program in Electronic and Telecommunication Engineering of the Autonomous University of Barcelona., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Fully-Printed Piezoelectric Devices for Flexible Electronics Applications

  • Aliqué, Marc
  • Simão, Claudia Delgado
  • Murillo, Gonzalo
  • Moya, Ana
Recent advances in materials and manufacturing processes pave the way for the establishment of piezoelectric materials via printing techniques as flexible sensors, actuators, and generators. Such flexible devices are key building blocks for future advanced robotic skin and conformable medical devices. Herein special focus is given to printed devices for its lightweight, flexibility, and manufacturing by high throughput techniques, offering a disruptive advantage in integration technologies and a wide range of opportunities for industrialization routes, where cost-effective applications are required. In this Progress Report, the different system parameters are discussed, pinpointing the ones that affect the production of reliable flexible printed piezoelectric devices and limit this technology to achieve higher technological maturity. Focus is made on screen and inkjet printing as fabrication techniques and the well-established piezoelectric polymer poly(vinylidene fluoride-co-trifluoroethylene). Key limiting factors found for the manufacturing of robust scalable all-printed piezoelectric devices stems mainly from the piezoelectric ink production and processing. Finally, the integration of these materials, via printing technologies, into soft, flexible, and even stretchable substrates is analyzed and insights are gathered on the manufacturing trends to achieve low-cost production of flexible piezoelectric devices embedded in electronic skin and smart wearables., M.A. is a fellow of Eurecat “Vicente Lopez” Ph.D. grant program. This work was financially supported by the Catalan Government through the funding grant ACCIÓ-Eurecat. G.M. thanks the financial support from La Caixa Foundation under the Junior Leader Retaining Fellowship (LCF/BQ/PR19/11700010) and EnSO project, accepted for funding within the Electronic Components and Systems for European Leadership Joint Undertaking in collaboration with the European Union's H2020 Framework Program (H2020/2014-2020) and National Authorities, under Grant Agreement No. 692482., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Controlled poling of a fully printed piezoelectric PVDF-TrFE device as a multifunctional platform with inkjet-printed silver electrodes

  • Alique, Marc
  • Moya, Ana
  • Kreuzer, Martin
  • Lacharmoise, Paul
  • Murillo, Gonzalo
  • Simao, Claudia Delgado
Fully printed piezoelectric devices are important components for seamlessly integrated circuits. Herein, for the first time, inkjet-printed silver electrodes on a screen-printed PVDF-TrFE polymer on a flexible film are reported. Studies on different inks and printing conditions are performed to select and prepare bottom and top inkjet-printed electrodes on the screen-printed PVDF-TrFE layer. Thermal-assisted electrical poling and unpoling conditions for the device are obtained, with high reproducibility and reversibility in multiple cycles. The fully printed device is investigated as a sensor, an actuator, and an energy harvester as a single device multifunctional platform. A maximum output voltage of 3.6 V is achieved in piezoelectric devices when used as a vibrational sensor. The maximum output power of 1.6 μW with a 1.1 MΩ optimum load resistor was obtained when clamped as a cantilever and accelerated at 0.75 G and characterized as a microgenerator., M. Alique is a fellow of the Eurecat “Vicente Lopez” PhD grant program. This work was financially supported by the Catalan Government through the funding grant ACCIÓ-Eurecat. This work has been carried out within the framework of the doctoral program in Electrical and Telecommunications Engineering of the Universitat Autònoma de Barcelona Eurecat thanks the NOVACENTRIX for the support with the photonic curing equipment. G. Murillo thanks the financial support from the La Caixa Foundation under the Junior Leader Retaining Fellowship (LCF/BQ/PR19/11700010), microbio (PID2020-119350RA-I00) and piezo2cell (EUR2020-112082) funded by MCIN/AEI/10.13039/501100011033 and European Union “NextGenerationEU”/PRTR”. The FTIR experiments were performed at the MIRAS beamline at ALBA Synchrotron with the collaboration of the ALBA staff., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Normal faulting and landsliding in morpho-structural domes related to buried salt stocks, Zagros Mountains, Iran. Insights into salt breakout

  • Gutiérrez, Francisco
  • Zarei, Mehdi
  • Hudec, Michael R.
  • Deirnik, Hosein
Normal faulting in domal structures above diapirs has important implications in hydrocarbon geoscience, but studies on surface faulting on exposed growing domes are scarce. Moreover, there is limited work addressing the erosional processes involved in the unroofing of active diapirs preceding salt emergence. This investigation analyses two morpho-structural domes (Gavbast Dome: GD; Kooh Bedoo Dome: KBD) associated with growing anticlines related to the rejuvenation of precursor buried salt stocks in the Zagros Mountains. The structural relief of the domes (1330 m in GD and 400 m in KBD) and the available chronological data on fold development indicate long-term uplift rates of around 0.1–0.4 mm/yr. GD displays three domains with different fault patterns: (1) fold-normal grabens in one half; (2) polygonal faulting with multiple enclosed graben depressions in the crest; and (3) fold-parallel faulting on the other half. KBD shows a major fold-normal graben restricted to the crest and one flank of the dome. The lack of the typical radial pattern related to multidirectional hoop extension can be attributed the suppression of extension in the fold-normal direction by regional shortening. Other factors such as complexities in the folding structure, outer-arc extension in the anticline crests, and plan geometry seem to play a local control on fault patterns. The studied domes display an extraordinarily high density of large slope movements, indicating that they play an instrumental role in the unroofing process. The slope failures, with sliding planes mainly developed in argillaceous units overlain by thick limestone packages, include incipient planar rock slides more than 5 km2 in area expressed as buckle folds in the lower part of the slopes. The main preparatory factors involved in the development of these slope collapses include rock mass weakening by faulting and slope over-steepening, both related to doming. Our detailed mapping and the examination of a number of salt diapirs in the Fars Arc suggest that episodic landsliding and more gradual fluvial dissection, often controlled by grabens, are the main erosional processes involved in the unroofing of active diapirs leading to salt emergence.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

In vivo reduction of age-dependent neuromelanin accumulation mitigates features of Parkinson's disease

  • González Sepúlveda, Marta|||0000-0002-5627-847X
  • Compte, Joan|||0000-0001-5447-5122
  • Cuadros, Thais|||0000-0001-6994-2424
  • Nicolau Vera, Alba|||0000-0002-0836-2802
  • Guillard-Sirieix, Camille|||0000-0002-2645-1892
  • Peñuelas, Núria|||0000-0001-6443-9790
  • Lorente-Picon, Marina
  • Parent, Annabelle|||0000-0002-6195-812X
  • Romero-Giménez, Jordi|||0000-0002-8459-9895
  • Cladera-Sastre, Joana M.
  • Laguna, Ariadna|||0000-0002-9732-6677
  • Vila Bover, Miquel|||0000-0002-1352-989X
Humans accumulate with age the dark-brown pigment neuromelanin inside specific neuronal groups. Neurons with the highest neuromelanin levels are particularly susceptible to degeneration in Parkinson's disease, especially dopaminergic neurons of the substantia nigra, the loss of which leads to characteristic motor Parkinson's disease symptoms. In contrast to humans, neuromelanin does not appear spontaneously in most animals, including rodents, and Parkinson's disease is an exclusively human condition. Using humanized neuromelanin-producing rodents, we recently found that neuromelanin can trigger Parkinson's disease pathology when accumulated above a specific pathogenic threshold. Here, by taking advantage of this newly developed animal model, we assessed whether the intracellular build-up of neuromelanin that occurs with age can be slowed down in vivo to prevent or attenuate Parkinson's disease. Because neuromelanin derives from the oxidation of free cytosolic dopamine, we enhanced dopamine vesicular encapsulation in the substantia nigra of neuromelanin-producing rats by viral vector-mediated overexpression of vesicular monoamine transporter 2 (VMAT2). This strategy reduced the formation of potentially toxic oxidized dopamine species that can convert into neuromelanin and maintained intracellular neuromelanin levels below their pathogenic threshold. Decreased neuromelanin production was associated with an attenuation of Lewy body-like inclusion formation and a long-term preservation of dopamine homeostasis, nigrostriatal neuronal integrity and motor function in these animals. Our results demonstrate the feasibility and therapeutic potential of modulating age-dependent intracellular neuromelanin production in vivo, thereby opening an unexplored path for the treatment of Parkinson's disease and, in a broader sense, brain ageing. Neurons that accumulate the highest levels of neuromelanin with age are also the most susceptible to degeneration in Parkinson's disease. Using a neuromelanin-producing rat model, Gonzalez-Sepulveda, Compte et al. show that slowing down age-dependent neuromelanin production can help prevent Parkinson's disease-like features.